eqmk
/
qmk_firmware
forked from mfulz_github/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Port the device mode demos to the XMEGA architecture where applicable.

This commit is contained in:
Dean Camera 2013-05-19 22:59:46 +02:00
parent 329629a316
commit 151a1c5888
57 changed files with 670 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Demos/Device/LowLevel/AudioInput/AudioInput.c
View File

@ -62,12 +62,14 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/AudioInput/AudioInput.h
View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** Maximum audio sample value for the microphone input. */

8
Demos/Device/LowLevel/AudioInput/asf.xml
View File

@ -1,14 +1,14 @@
<asf xmlversion="1.0">
<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example">
<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8">
<require idref="lufa.demos.device.lowlevel.audio_input"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)">

2
Demos/Device/LowLevel/AudioOutput/AudioOutput.c
View File

@ -62,12 +62,14 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/AudioOutput/AudioOutput.h
View File

@ -47,6 +47,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

8
Demos/Device/LowLevel/AudioOutput/asf.xml
View File

@ -1,14 +1,14 @@
<asf xmlversion="1.0">
<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example">
<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8">
<require idref="lufa.demos.device.lowlevel.audio_output"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 6
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

2
Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
View File

@ -58,7 +58,7 @@
#define CDC2_RX_EPADDR (ENDPOINT_DIR_OUT | 5)
/** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */
#define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6)
#define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6)
/** Size in bytes of the CDC device-to-host notification IN endpoints. */
#define CDC_NOTIFICATION_EPSIZE 8

12
Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
View File

@ -84,12 +84,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
View File

@ -48,6 +48,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
View File

@ -13,6 +13,9 @@
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/DualVirtualSerial/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example">
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8">
<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega">
<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/GenericHID/GenericHID.c
View File

@ -57,12 +57,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
LEDs_Init();

3
Demos/Device/LowLevel/GenericHID/GenericHID.h
View File

@ -46,9 +46,10 @@
#include "Descriptors.h"
#include "Config/AppConfig.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

5
Demos/Device/LowLevel/GenericHID/GenericHID.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*
@ -68,7 +71,7 @@
* <tr>
* <td>GENERIC_REPORT_SIZE</td>
* <td>AppConfig.h</td>
* <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
* <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
* must be an integer ranging from 1 to 255.</td>
* </tr>
* </table>

20
Demos/Device/LowLevel/GenericHID/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example">
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8">
<require idref="lufa.demos.device.lowlevel.generic_hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega">
<require idref="lufa.demos.device.lowlevel.generic_hid"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 1
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/Joystick/Joystick.c
View File

@ -56,12 +56,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/Joystick/Joystick.h
View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/Joystick/Joystick.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/Joystick/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example">
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8">
<require idref="lufa.demos.device.lowlevel.joystick"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega">
<require idref="lufa.demos.device.lowlevel.joystick"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

14
Demos/Device/LowLevel/Keyboard/Keyboard.c
View File

@ -74,12 +74,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();
@ -311,7 +323,7 @@ void SendNextReport(void)
else
{
/* Check to see if the report data has changed - if so a report MUST be sent */
SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0);
SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0);
}
/* Select the Keyboard Report Endpoint */

1
Demos/Device/LowLevel/Keyboard/Keyboard.h
View File

@ -51,6 +51,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/Keyboard/Keyboard.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/Keyboard/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example">
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8">
<require idref="lufa.demos.device.lowlevel.keyboard"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega">
<require idref="lufa.demos.device.lowlevel.keyboard"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 3
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
View File

@ -65,12 +65,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
View File

@ -46,6 +46,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/KeyboardMouse/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example">
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8">
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega">
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/MIDI/MIDI.c
View File

@ -56,12 +56,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/MIDI/MIDI.h
View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/MIDI/MIDI.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/MIDI/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example">
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8">
<require idref="lufa.demos.device.lowlevel.midi"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega">
<require idref="lufa.demos.device.lowlevel.midi"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 4
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/MassStorage/MassStorage.c
View File

@ -67,12 +67,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/MassStorage/MassStorage.h
View File

@ -51,6 +51,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Dataflash.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/MassStorage/MassStorage.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/MassStorage/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example">
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8">
<require idref="lufa.demos.device.lowlevel.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega">
<require idref="lufa.demos.device.lowlevel.mass_storage"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 1
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/Mouse/Mouse.c
View File

@ -73,12 +73,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

3
Demos/Device/LowLevel/Mouse/Mouse.h
View File

@ -45,11 +45,12 @@
#include <string.h>
#include "Descriptors.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/Mouse/Mouse.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/Mouse/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example">
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">
<require idref="lufa.demos.device.lowlevel.mouse"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">
<require idref="lufa.demos.device.lowlevel.mouse"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 3
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
View File

@ -62,12 +62,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
LEDs_Init();

3
Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
View File

@ -51,10 +51,11 @@
#include "Lib/ARP.h"
#include "Lib/Webserver.h"
#include "Config/AppConfig.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** Notification value to indicate that a frame is ready to be read by the host. */

3
Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
View File

@ -12,6 +12,9 @@
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/RNDISEthernet/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example">
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8">
<require idref="lufa.demos.device.lowlevel.rndis"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega">
<require idref="lufa.demos.device.lowlevel.rndis"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 4
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
View File

@ -70,12 +70,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
View File

@ -48,6 +48,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/VirtualSerial/asf.xml
View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example">
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8">
<require idref="lufa.demos.device.lowlevel.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega">
<require idref="lufa.demos.device.lowlevel.cdc"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)">