eqmk
/
qmk_firmware
forked from mfulz_github/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Optimize vendor/product description string display code in MassStorageHost. 

Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
This commit is contained in:
Dean Camera 2009-06-26 09:58:43 +00:00
parent b2cf4d3222
commit 1756087c3e
60 changed files with 51 additions and 20620 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Bootloaders/CDC/makefile
View File

@ -48,7 +48,7 @@
# MCU name
MCU = at90usb1287
MCU = at90usb647
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
@ -92,6 +92,10 @@ F_CPU = 8000000
F_CLOCK = 8000000
# Starting byte address of the bootloader
BOOT_START = 0x1E000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
@ -177,10 +181,6 @@ EXTRAINCDIRS = $(LUFA_PATH)/
CSTANDARD = -std=gnu99
# Starting byte address of the bootloader
BOOT_START = 0x1E000
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL

2
Bootloaders/DFU/BootloaderDFU.c
View File

@ -96,7 +96,7 @@ uint16_t EndAddr = 0x0000;
* runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start
* the loaded application code.
*/
int main (void)
int main(void)
{
/* Configure hardware required by the bootloader */
SetupHardware();

8
Bootloaders/DFU/makefile
View File

@ -92,6 +92,10 @@ F_CPU = 8000000
F_CLOCK = 8000000
# Starting byte address of the bootloader
BOOT_START = 0x1E000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
@ -178,10 +182,6 @@ EXTRAINCDIRS = $(LUFA_PATH)/
CSTANDARD = -std=gnu99
# Starting byte address of the bootloader
BOOT_START = 0x1E000
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL

8
Bootloaders/TeensyHID/makefile
View File

@ -92,6 +92,10 @@ F_CPU = 16000000
F_CLOCK = 16000000
# Starting byte address of the bootloader
BOOT_START = 0xC000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
@ -178,10 +182,6 @@ EXTRAINCDIRS = $(LUFA_PATH)/
CSTANDARD = -std=gnu99
# Starting byte address of the bootloader
BOOT_START = 0xC000
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL

15
Demos/Host/ClassDriver/CDCHost/CDCHost.c
View File

@ -69,6 +69,21 @@ int main(void)
for (;;)
{
switch (USB_HostState)
{
case HOST_STATE_Addressed:
if (!(CDC_Host_ConfigurePipes(&VirtualSerial_CDC_Interface)))
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
break;
}
CDC_Host_USBTask(&VirtualSerial_CDC_Interface);
USB_USBTask();
}

1485
Demos/Host/ClassDriver/GenericHIDHost/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

295
Demos/Host/ClassDriver/GenericHIDHost/GenericHIDHost.c
View File

@ -1,295 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the GenericHIDHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "GenericHIDHost.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
HID_Host_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("Device Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Reads in and processes the next report from the attached device, displaying the report
* contents on the board LEDs and via the serial port.
*/
void ReadNextReport(void)
{
/* Select and unfreeze HID data IN pipe */
Pipe_SelectPipe(HID_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Check to see if a packet has been received */
if (!(Pipe_IsINReceived()))
{
/* Refreeze HID data IN pipe */
Pipe_Freeze();
return;
}
/* Ensure pipe contains data before trying to read from it */
if (Pipe_IsReadWriteAllowed())
{
uint8_t ReportINData[Pipe_BytesInPipe()];
/* Read in HID report data */
Pipe_Read_Stream_LE(&ReportINData, sizeof(ReportINData));
/* Print report data through the serial port */
for (uint16_t CurrByte = 0; CurrByte < sizeof(ReportINData); CurrByte++)
printf_P(PSTR("0x%02X "), ReportINData[CurrByte]);
puts_P(PSTR("\r\n"));
}
/* Clear the IN endpoint, ready for next data packet */
Pipe_ClearIN();
/* Refreeze HID data IN pipe */
Pipe_Freeze();
}
/** Writes a report to the attached device.
*
* \param ReportOUTData Buffer containing the report to send to the device
* \param ReportIndex Index of the report in the device (zero if the device does not use multiple reports)
* \param ReportType Type of report to send, either HID_REPORTTYPE_OUTPUT or HID_REPORTTYPE_FEATURE
* \param ReportLength Length of the report to send
*/
void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t ReportType, uint16_t ReportLength)
{
/* Select and unfreeze HID data OUT pipe */
Pipe_SelectPipe(HID_DATA_OUT_PIPE);
/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the
* control endpoint instead) - check to see if the OUT endpoint has been initialized */
if (Pipe_IsConfigured())
{
Pipe_Unfreeze();
/* Ensure pipe is ready to be written to before continuing */
if (!(Pipe_IsOUTReady()))
{
/* Refreeze the data OUT pipe */
Pipe_Freeze();
return;
}
/* If the report index is used, send it before the report data */
if (ReportIndex)
Pipe_Write_Byte(ReportIndex);
/* Write out HID report data */
Pipe_Write_Stream_LE(ReportOUTData, ReportLength);
/* Clear the OUT endpoint, send last data packet */
Pipe_ClearOUT();
/* Refreeze the data OUT pipe */
Pipe_Freeze();
}
else
{
/* Class specific request to send a HID report to the device */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetReport,
.wValue = ((ReportType << 8) | ReportIndex),
.wIndex = 0,
.wLength = ReportLength,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request to the device */
USB_Host_SendControlRequest(ReportOUTData);
}
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* HID reports from the device and to send reports if desired.
*/
void HID_Host_Task(void)
{
uint8_t ErrorCode;
/* Switch to determine what user-application handled host state the host state machine is in */
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("HID Device Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
ReadNextReport();
break;
}
}

95
Demos/Host/ClassDriver/GenericHIDHost/GenericHIDHost.h
View File

@ -1,95 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for MouseHost.c.
*/
#ifndef _GENERICHID_HOST_H_
#define _GENERICHID_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include <avr/power.h>
#include <stdio.h>
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/HID.h>
/* Macros: */
/** Pipe number for the HID data IN pipe */
#define HID_DATA_IN_PIPE 1
/** Pipe number for the HID data OUT pipe */
#define HID_DATA_OUT_PIPE 2
/** HID Class specific request to send a HID report to the device. */
#define REQ_SetReport 0x09
/** HID Report type specifier, for output reports to a device */
#define HID_REPORTTYPE_OUTPUT 0x02
/** HID Report type specifier, for feature reports to a device */
#define HID_REPORTTYPE_FEATURE 0x03
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void HID_Host_Task(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void ReadNextReport(void);
void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t ReportType, uint16_t ReportLength);
#endif

55
Demos/Host/ClassDriver/GenericHIDHost/GenericHIDHost.txt
View File

@ -1,55 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Generic HID Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Generic HID host demonstration application. This gives a simple reference
* application for implementing a Generic HID USB host, for any device implementing
* the HID profile.
*
* Received reports from the attached device are printed to the serial port.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

740
Demos/Host/ClassDriver/GenericHIDHost/makefile
View File

@ -1,740 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = GenericHIDHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

1485
Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

287
Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c
View File

@ -1,287 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the KeyboardHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "KeyboardHost.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Keyboard HID Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
Keyboard_HID_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("Device Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Reads in and processes the next report from the attached device, displaying the report
* contents on the board LEDs and via the serial port.
*/
void ReadNextReport(void)
{
USB_KeyboardReport_Data_t KeyboardReport;
/* Select keyboard data pipe */
Pipe_SelectPipe(KEYBOARD_DATAPIPE);
/* Unfreeze keyboard data pipe */
Pipe_Unfreeze();
/* Check to see if a packet has been received */
if (!(Pipe_IsINReceived()))
{
/* Refreeze HID data IN pipe */
Pipe_Freeze();
return;
}
/* Ensure pipe contains data before trying to read from it */
if (Pipe_IsReadWriteAllowed())
{
/* Read in keyboard report data */
Pipe_Read_Stream_LE(&KeyboardReport, sizeof(KeyboardReport));
/* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */
LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0);
/* Check if a key has been pressed */
if (KeyboardReport.KeyCode)
{
/* Toggle status LED to indicate keypress */
if (LEDs_GetLEDs() & LEDS_LED2)
LEDs_TurnOffLEDs(LEDS_LED2);
else
LEDs_TurnOnLEDs(LEDS_LED2);
char PressedKey = 0;
/* Retrieve pressed key character if alphanumeric */
if ((KeyboardReport.KeyCode >= 0x04) && (KeyboardReport.KeyCode <= 0x1D))
PressedKey = (KeyboardReport.KeyCode - 0x04) + 'A';
else if ((KeyboardReport.KeyCode >= 0x1E) && (KeyboardReport.KeyCode <= 0x27))
PressedKey = (KeyboardReport.KeyCode - 0x1E) + '0';
else if (KeyboardReport.KeyCode == 0x2C)
PressedKey = ' ';
else if (KeyboardReport.KeyCode == 0x28)
PressedKey = '\n';
/* Print the pressed key character out through the serial port if valid */
if (PressedKey)
putchar(PressedKey);
}
}
/* Clear the IN endpoint, ready for next data packet */
Pipe_ClearIN();
/* Refreeze keyboard data pipe */
Pipe_Freeze();
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* HID reports from the device and display the results onto the board LEDs.
*/
void Keyboard_HID_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
/* HID class request to set the keyboard protocol to the Boot Protocol */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetProtocol,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Protocol).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Keyboard Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* If a report has been received, read and process it */
ReadNextReport();
break;
}
}

93
Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h
View File

@ -1,93 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for KeyboardHost.c.
*/
#ifndef _KEYBOARD_HOST_H_
#define _KEYBOARD_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdio.h>
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/HID.h>
/* Macros: */
/** Pipe number for the keyboard data IN pipe */
#define KEYBOARD_DATAPIPE 1
/** HID Class Specific request to set the report protocol mode */
#define REQ_SetProtocol 0x0B
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Type Defines: */
/** Type define for a standard Boot Protocol Keyboard report */
typedef struct
{
uint8_t Modifier; /**< Keyboard modifier byte, indicating pressed modifier keys (such as Shift, Control, etc.) */
uint8_t RESERVED; /**< Reserved for OEM use, always set to 0 */
uint8_t KeyCode; /**< Key code of the currently pressed key */
} USB_KeyboardReport_Data_t;
/* Function Prototypes: */
void Keyboard_HID_Task(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void ReadNextReport(void);
#endif

64
Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt
View File

@ -1,64 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Keyboard Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Keyboard host demonstration application. This gives a simple reference
* application for implementing a USB keyboard, for USB keyboards using
* the standard keyboard HID profile.
*
* Pressed alpha-numeric, enter or space key is transmitted through the serial
* USART at serial settings 9600, 8, N, 1.
*
* This uses a naive method where the keyboard is set to Boot Protocol mode, so
* that the report structure is fixed and known. A better implementation
* uses the HID report parser for correct report data processing across
* all compatible mice with advanced characteristics, as shown in the
* KeyboardHostWithParser demo application.
*
* Currently only single interface keyboards are supported.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

739
Demos/Host/ClassDriver/KeyboardHost/makefile
View File

@ -1,739 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = KeyboardHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

1485
Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

72
Demos/Host/ClassDriver/KeyboardHostWithParser/HIDReport.c
View File

@ -1,72 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "HIDReport.h"
/** Size in bytes of the attached device's HID report descriptor */
uint16_t HIDReportSize;
/** Processed HID report descriptor items structure, containing information on each HID report element */
HID_ReportInfo_t HIDReportInfo;
/** Function to read in the HID report descriptor from the attached device, and process it into easy-to-read
* structures via the HID parser routines in the LUFA library.
*
* \return A value from the KeyboardHostWithParser_GetHIDReportDataCodes_t enum
*/
uint8_t GetHIDReportData(void)
{
/* Create a buffer big enough to hold the entire returned HID report */
uint8_t HIDReportData[HIDReportSize];
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Report << 8),
.wIndex = 0,
.wLength = HIDReportSize,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send control request to retrieve the HID report from the attached device */
if (USB_Host_SendControlRequest(HIDReportData) != HOST_SENDCONTROL_Successful)
return ParseControlError;
/* Send the HID report to the parser for processing */
if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful)
return ParseError;
return ParseSuccessful;
}

80
Demos/Host/ClassDriver/KeyboardHostWithParser/HIDReport.h
View File

@ -1,80 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for HIDReport.c.
*/
#ifndef _HID_REPORT_H_
#define _HID_REPORT_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/HID.h>
#include "KeyboardHostWithParser.h"
/* Macros: */
/** HID Report Descriptor Usage Page value for a desktop keyboard */
#define USAGE_PAGE_KEYBOARD 0x07
/* Enums: */
/** Enum for the possible return codes of the GetHIDReportData() function. */
enum KeyboardHostWithParser_GetHIDReportDataCodes_t
{
ParseSuccessful = 0, /**< HID report descriptor parsed successfully */
ParseError = 1, /**< Failed to fully process the HID report descriptor */
ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */
};
/* Type Defines: */
/** Type define for a HID descriptor. */
typedef struct
{
USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */
uint16_t HIDSpec; /**< Implemented HID class specification, in BCD encoded format */
uint8_t CountryCode; /**< Country code value for localized hardware */
uint8_t TotalHIDDescriptors; /**< Total number of HID report descriptors in the current interface */
uint8_t HIDReportType; /**< HID report type of the first HID report descriptor */
uint16_t HIDReportLength; /**< Total size in bytes of the first HID report descriptor */
} USB_Descriptor_HID_t;
/* External Variables: */
extern uint16_t HIDReportSize;
extern HID_ReportInfo_t HIDReportInfo;
/* Function Prototypes: */
uint8_t GetHIDReportData(void);
#endif

295
Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c
View File

@ -1,295 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "KeyboardHostWithParser.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Keyboard HID Parser Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
Keyboard_HID_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* the HID report descriptor and HID reports from the device and display the results onto the board LEDs.
*/
void Keyboard_HID_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Processing HID Report.\r\n"));
/* Get and process the device's first HID report descriptor */
if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
{
puts_P(PSTR("Report Parse Error.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Keyboard Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* Select and unfreeze keyboard data pipe */
Pipe_SelectPipe(KEYBOARD_DATAPIPE);
Pipe_Unfreeze();
/* Check to see if a packet has been received */
if (Pipe_IsINReceived())
{
/* Check if data has been received from the attached keyboard */
if (Pipe_IsReadWriteAllowed())
{
/* Create buffer big enough for the report */
uint8_t KeyboardReport[Pipe_BytesInPipe()];
/* Load in the keyboard report */
Pipe_Read_Stream_LE(KeyboardReport, Pipe_BytesInPipe());
/* Process the read in keyboard report from the device */
ProcessKeyboardReport(KeyboardReport);
}
/* Clear the IN endpoint, ready for next data packet */
Pipe_ClearIN();
}
/* Freeze keyboard data pipe */
Pipe_Freeze();
break;
}
}
/** Processes a read HID report from an attached keyboard, extracting out elements via the HID parser results
* as required and prints pressed characters to the serial port. Each time a key is typed, a board LED is toggled.
*
* \param KeyboardReport Pointer to a HID report from an attached keyboard device
*/
void ProcessKeyboardReport(uint8_t* KeyboardReport)
{
/* Check each HID report item in turn, looking for keyboard scan code reports */
for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
{
/* Create a temporary item pointer to the next report item */
HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
/* Check if the current report item is a keyboard scancode */
if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_KEYBOARD) &&
(ReportItem->Attributes.BitSize == 8) &&
(ReportItem->Attributes.Logical.Maximum > 1) &&
(ReportItem->ItemType == REPORT_ITEM_TYPE_In))
{
/* Retrieve the keyboard scancode from the report data retrieved from the device */
bool FoundData = USB_GetHIDReportItemInfo(KeyboardReport, ReportItem);
/* For multi-report devices - if the requested data was not in the issued report, continue */
if (!(FoundData))
continue;
/* Key code is an unsigned char in length, cast to the appropriate type */
uint8_t KeyCode = (uint8_t)ReportItem->Value;
/* If scancode is non-zero, a key is being pressed */
if (KeyCode)
{
/* Toggle status LED to indicate keypress */
if (LEDs_GetLEDs() & LEDS_LED2)
LEDs_TurnOffLEDs(LEDS_LED2);
else
LEDs_TurnOnLEDs(LEDS_LED2);
char PressedKey = 0;
/* Convert scancode to printable character if alphanumeric */
if ((KeyCode >= 0x04) && (KeyCode <= 0x1D))
PressedKey = (KeyCode - 0x04) + 'A';
else if ((KeyCode >= 0x1E) && (KeyCode <= 0x27))
PressedKey = (KeyCode - 0x1E) + '0';
else if (KeyCode == 0x2C)
PressedKey = ' ';
else if (KeyCode == 0x28)
PressedKey = '\n';
/* Print the pressed key character out through the serial port if valid */
if (PressedKey)
putchar(PressedKey);
}
/* Once a scancode is found, stop scanning through the report items */
break;
}
}
}

78
Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h
View File

@ -1,78 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#ifndef _KEYBOARD_HOST_H_
#define _KEYBOARD_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <stdio.h>
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/HID.h>
#include "HIDReport.h"
/* Macros: */
/** Pipe number for the keyboard report data pipe */
#define KEYBOARD_DATAPIPE 1
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void Keyboard_HID_Task(void);
void SetupHardware(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void ProcessKeyboardReport(uint8_t* KeyboardReport);
#endif

62
Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt
View File

@ -1,62 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Keyboard Host With HID Descriptor Parser Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Keyboard host demonstration application. This gives a simple reference
* application for implementing a USB Keyboard host, for USB keyboards using
* the standard Keyboard HID profile. It uses a HID parser for the HID reports,
* allowing for correct operation across all USB keyboards. This demo supports
* keyboards with a single HID report.
*
* Pressed alpha-numeric, enter or space key is transmitted through the serial
* USART at serial settings 9600, 8, N, 1. On connection to a USB keyboard, the
* report items will be processed and printed as a formatted list through the
* USART before the keyboard is fully enumerated.
*
* Currently only single interface keyboards are supported.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

741
Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
View File

@ -1,741 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = KeyboardHostWithParser
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
HIDReport.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

1485
Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

691
Demos/Host/ClassDriver/MassStorageHost/Lib/MassStoreCommands.c
View File

@ -1,691 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Mass Storage Device commands, to issue MSD commands to the device for
* reading device status, capacity, and other characteristics. This file
* also contains block read and write functions, so that device blocks
* can be read and written. In general, these functions would be chained
* to a FAT library to give file-level access to an attached device's contents.
*
* \note Many Mass Storage devices on the market are non-compliant to the
* specifications and thus can prove difficult to interface with. It
* may be necessary to retry the functions in the module several times
* after they have returned and error to successfully send the command
* to the device. Some devices may also need to have the stream function
* timeout period extended beyond 100ms (some badly designed devices exceeding
* 1.5 seconds occasionally) by defining USB_STREAM_TIMEOUT_MS to a
* larger value in the project makefile and passing it to the compiler
* via the -D switch.
*/
#define INCLUDE_FROM_MASSSTORE_COMMANDS_C
#include "MassStoreCommands.h"
/* Globals: */
/** Current CBW to send to the device. This is automatically filled by the routines
* in this file and is not externally accessible.
*/
static CommandBlockWrapper_t SCSICommandBlock;
/** Current CSW received from the device. This is automatically filled by the routines
* in this file and is externally accessible so that the return codes may be checked.
*/
CommandStatusWrapper_t SCSICommandStatus;
/** Current Tag value used in issued CBWs to the device. This is automatically incremented
* by the routines in this file, and is not externally accessible.
*/
static uint32_t MassStore_Tag = 1;
/** Routine to send the current CBW to the device, and increment the Tag value as needed.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
static uint8_t MassStore_SendCommand(void)
{
uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
/* Each transmission should have a unique tag value, excluding values 0 and 0xFFFFFFFF */
if (++MassStore_Tag == 0xFFFFFFFF)
MassStore_Tag = 1;
/* Select the OUT data pipe for CBW transmission */
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the CBW command to the OUT pipe */
if ((ErrorCode = Pipe_Write_Stream_LE(&SCSICommandBlock, sizeof(CommandBlockWrapper_t))) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Send the data in the OUT pipe to the attached device */
Pipe_ClearOUT();
while(!(Pipe_IsOUTReady()));
/* Freeze pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Waits until the attached device is ready to accept data following a CBW, checking
* to ensure that the device has not stalled the transaction.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
static uint8_t MassStore_WaitForDataReceived(void)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
/* Select the IN data pipe for data reception */
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Wait until data received in the IN pipe */
while (!(Pipe_IsINReceived()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
return PIPE_RWSTREAM_Timeout;
}
Pipe_Freeze();
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the OUT pipe */
USB_Host_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_Freeze();
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the IN pipe */
USB_Host_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
return PIPE_RWSTREAM_DeviceDisconnected;
};
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
Pipe_Freeze();
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Sends or receives the transaction's data stage to or from the attached device, reading or
* writing to the nominated buffer.
*
* \param BufferPtr Pointer to the data buffer to read from or write to
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
static uint8_t MassStore_SendReceiveData(void* BufferPtr)
{
uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
uint16_t BytesRem = SCSICommandBlock.Header.DataTransferLength;
/* Check the direction of the SCSI command data stage */
if (SCSICommandBlock.Header.Flags & COMMAND_DIRECTION_DATA_IN)
{
/* Select the IN data pipe for data reception */
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Read in the block data from the pipe */
if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Acknowledge the packet */
Pipe_ClearIN();
}
else
{
/* Select the OUT data pipe for data transmission */
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the block data to the pipe */
if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Acknowledge the packet */
Pipe_ClearOUT();
while (!(Pipe_IsOUTReady()));
}
/* Freeze used pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Routine to receive the current CSW from the device.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
static uint8_t MassStore_GetReturnedStatus(void)
{
uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
/* If an error in the command ocurred, abort */
if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Select the IN data pipe for data reception */
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Load in the CSW from the attached device */
if ((ErrorCode = Pipe_Read_Stream_LE(&SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Clear the data ready for next reception */
Pipe_ClearIN();
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Clears the stall condition in the attached device on the nominated endpoint number.
*
* \param EndpointNum Endpoint number in the attached device whose stall condition is to be cleared
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum
*/
uint8_t MassStore_ClearPipeStall(const uint8_t EndpointNum)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
.bRequest = REQ_ClearFeature,
.wValue = FEATURE_ENDPOINT_HALT,
.wIndex = EndpointNum,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(NULL);
}
/** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
* readying the device for the next CBW.
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum
*/
uint8_t MassStore_MassStorageReset(void)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_MassStorageReset,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(NULL);
}
/** Issues a Mass Storage class specific request to determine the index of the highest numbered Logical
* Unit in the attached device.
*
* \param MaxLUNIndex Pointer to the location that the maximum LUN index value should be stored
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum
*/
uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)
{
uint8_t ErrorCode;
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_GetMaxLUN,
.wValue = 0,
.wIndex = 0,
.wLength = 1,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
if ((ErrorCode = USB_Host_SendControlRequest(MaxLUNIndex)) == HOST_SENDCONTROL_SetupStalled)
{
/* Clear the pipe stall */
Pipe_ClearStall();
/* Some faulty Mass Storage devices don't implement the GET_MAX_LUN request, so assume a single LUN */
*MaxLUNIndex = 0;
}
return ErrorCode;
}
/** Issues a SCSI Request Sense command to the attached device, to determine the current SCSI sense information. This
* gives error codes for the last issued SCSI command to the device.
*
* \param LUNIndex Index of the LUN inside the device the command is being addressed to
* \param SensePtr Pointer to the sense data structure where the sense data from the device is to be stored
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue REQUEST SENSE command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
.Header =
{
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = sizeof(SCSI_Request_Sense_Response_t),
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 6
},
.SCSICommandData =
{
SCSI_CMD_REQUEST_SENSE,
0x00, // Reserved
0x00, // Reserved
0x00, // Reserved
sizeof(SCSI_Request_Sense_Response_t), // Allocation Length
0x00 // Unused (control)
}
};
/* Send SCSI command to the attached device */
MassStore_SendCommand();
/* Wait until data received from the device */
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned sense data into the buffer */
if ((ReturnCode = MassStore_SendReceiveData((uint8_t*)SensePtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the
* storage medium into a buffer.
*
* \param LUNIndex Index of the LUN inside the device the command is being addressed to
* \param BlockAddress Start block address to read from
* \param Blocks Number of blocks to read from the device
* \param BlockSize Size in bytes of each block to read
* \param BufferPtr Pointer to the buffer where the read data is to be written to
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to read in the given blocks from the device */
SCSICommandBlock = (CommandBlockWrapper_t)
{
.Header =
{
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = ((uint32_t)Blocks * BlockSize),
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 10
},
.SCSICommandData =
{
SCSI_CMD_READ_10,
0x00, // Unused (control bits, all off)
(BlockAddress >> 24), // MSB of Block Address
(BlockAddress >> 16),
(BlockAddress >> 8),
(BlockAddress & 0xFF), // LSB of Block Address
0x00, // Unused (reserved)
0x00, // MSB of Total Blocks to Read
Blocks, // LSB of Total Blocks to Read
0x00 // Unused (control)
}
};
/* Send SCSI command to the attached device */
MassStore_SendCommand();
/* Wait until data received from the device */
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned block data into the buffer */
if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the
* storage medium from a buffer.
*
* \param LUNIndex Index of the LUN inside the device the command is being addressed to
* \param BlockAddress Start block address to write to
* \param Blocks Number of blocks to write to in the device
* \param BlockSize Size in bytes of each block to write
* \param BufferPtr Pointer to the buffer where the write data is to be sourced from
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to write the given blocks to the device */
SCSICommandBlock = (CommandBlockWrapper_t)
{
.Header =
{
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = ((uint32_t)Blocks * BlockSize),
.Flags = COMMAND_DIRECTION_DATA_OUT,
.LUN = LUNIndex,
.SCSICommandLength = 10
},
.SCSICommandData =
{
SCSI_CMD_WRITE_10,
0x00, // Unused (control bits, all off)
(BlockAddress >> 24), // MSB of Block Address
(BlockAddress >> 16),
(BlockAddress >> 8),
(BlockAddress & 0xFF), // LSB of Block Address
0x00, // Unused (reserved)
0x00, // MSB of Total Blocks to Write
Blocks, // LSB of Total Blocks to Write
0x00 // Unused (control)
}
};
/* Send SCSI command to the attached device */
MassStore_SendCommand();
/* Write the data to the device from the buffer */
if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept
* other commands.
*
* \param LUNIndex Index of the LUN inside the device the command is being addressed to
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
{
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue TEST UNIT READY command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
.Header =
{
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = 0,
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 6
},
.SCSICommandData =
{
SCSI_CMD_TEST_UNIT_READY,
0x00, // Reserved
0x00, // Reserved
0x00, // Reserved
0x00, // Reserved
0x00 // Unused (control)
}
};
/* Send SCSI command to the attached device */
MassStore_SendCommand();
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the
* given Logical Unit within the device.
*
* \param LUNIndex Index of the LUN inside the device the command is being addressed to
* \param CapacityPtr Device capacity structure where the capacity data is to be stored
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const CapacityPtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue READ CAPACITY command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
.Header =
{
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = sizeof(SCSI_Capacity_t),
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 10
},
.SCSICommandData =
{
SCSI_CMD_READ_CAPACITY_10,
0x00, // Reserved
0x00, // MSB of Logical block address
0x00,
0x00,
0x00, // LSB of Logical block address
0x00, // Reserved
0x00, // Reserved
0x00, // Partial Medium Indicator
0x00 // Unused (control)
}
};
/* Send SCSI command to the attached device */
MassStore_SendCommand();
/* Wait until data received from the device */
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned capacity data into the buffer */
if ((ReturnCode = MassStore_SendReceiveData(CapacityPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Endian-correct the read data */
CapacityPtr->Blocks = SwapEndian_32(CapacityPtr->Blocks);
CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize);
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from
* being removed. This is a legacy command for SCSI disks with removable storage (such as ZIP disks), but should still
* be issued before the first read or write command is sent.
*
* \param LUNIndex Index of the LUN inside the device the command is being addressed to
* \param PreventRemoval Whether or not the LUN media should be locked to prevent removal or not
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool PreventRemoval)
{
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
.Header =
{
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = 0,
.Flags = COMMAND_DIRECTION_DATA_OUT,
.LUN = LUNIndex,
.SCSICommandLength = 6
},
.SCSICommandData =
{
SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL,
0x00, // Reserved
0x00, // Reserved
PreventRemoval, // Prevent flag
0x00, // Reserved
0x00 // Unused (control)
}
};
/* Send SCSI command to the attached device */
MassStore_SendCommand();
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()))
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_NoError;
}

174
Demos/Host/ClassDriver/MassStorageHost/Lib/MassStoreCommands.h
View File

@ -1,174 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for MassStoreCommands.c.
*/
#ifndef _MASS_STORE_COMMANDS_H_
#define _MASS_STORE_COMMANDS_H_
/* Includes: */
#include <avr/io.h>
#include "MassStorageHost.h"
#include "SCSI_Codes.h"
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
/* Macros: */
/** Class specific request to reset the Mass Storage interface of the attached device */
#define REQ_MassStorageReset 0xFF
/** Class specific request to retrieve the maximum Logical Unit Number (LUN) index of the attached device */
#define REQ_GetMaxLUN 0xFE
/** Command Block Wrapper signature byte, for verification of valid CBW blocks */
#define CBW_SIGNATURE 0x43425355UL
/** Command Static Wrapper signature byte, for verification of valid CSW blocks */
#define CSW_SIGNATURE 0x53425355UL
/** Data direction mask for the Flags field of a CBW, indicating Host-to-Device transfer direction */
#define COMMAND_DIRECTION_DATA_OUT (0 << 7)
/** Data direction mask for the Flags field of a CBW, indicating Device-to-Host transfer direction */
#define COMMAND_DIRECTION_DATA_IN (1 << 7)
/** Timeout period between the issuing of a CBW to a device, and the reception of the first packet */
#define COMMAND_DATA_TIMEOUT_MS 2000
/** Pipe number of the Mass Storage data IN pipe */
#define MASS_STORE_DATA_IN_PIPE 1
/** Pipe number of the Mass Storage data OUT pipe */
#define MASS_STORE_DATA_OUT_PIPE 2
/* Type defines: */
/** Type define for a Mass Storage class Command Block Wrapper, used to wrap SCSI
* commands for transport over the USB bulk endpoints to the device.
*/
typedef struct
{
struct
{
uint32_t Signature; /**< Command block signature, always equal to CBW_SIGNATURE */
uint32_t Tag; /**< Current CBW tag, to positively associate a CBW with a CSW */
uint32_t DataTransferLength; /**< Length of data to transfer, following the CBW */
uint8_t Flags; /**< Block flags, equal to one of the COMMAND_DIRECTION_DATA_* macros */
uint8_t LUN; /**< Logical Unit Number the CBW is addressed to in the device */
uint8_t SCSICommandLength; /**< Length of the SCSI command in the CBW */
} Header;
uint8_t SCSICommandData[16]; /**< SCSI command to issue to the device */
} CommandBlockWrapper_t;
/** Type define for a Mass Storage class Command Status Wrapper, used to wrap SCSI
* responses for transport over the USB bulk endpoints from the device.
*/
typedef struct
{
uint32_t Signature; /**< Command status signature, always equal to CSW_SIGNATURE */
uint32_t Tag; /**< Current CBW tag, to positively associate a CBW with a CSW */
uint32_t DataTransferResidue; /**< Length of data not transferred */
uint8_t Status; /**< Command status, a value from the MassStorageHost_CommandStatusCodes_t enum */
} CommandStatusWrapper_t;
/** Type define for a SCSI Sense structure. Structures of this type are filled out by the
* device via the MassStore_RequestSense() function, indicating the current sense data of the
* device (giving explicit error codes for the last issued command). For details of the
* structure contents, refer to the SCSI specifications.
*/
typedef struct
{
uint8_t ReponseCode;
uint8_t SegmentNumber;
unsigned char SenseKey : 4;
unsigned char _RESERVED1 : 1;
unsigned char ILI : 1;
unsigned char EOM : 1;
unsigned char FileMark : 1;
uint8_t Information[4];
uint8_t AdditionalLength;
uint8_t CmdSpecificInformation[4];
uint8_t AdditionalSenseCode;
uint8_t AdditionalSenseQualifier;
uint8_t FieldReplaceableUnitCode;
uint8_t SenseKeySpecific[3];
} SCSI_Request_Sense_Response_t;
/** SCSI capacity structure, to hold the total capacity of the device in both the number
* of blocks in the current LUN, and the size of each block. This structure is filled by
* the device when the MassStore_ReadCapacity() function is called.
*/
typedef struct
{
uint32_t Blocks; /**< Number of blocks in the addressed LUN of the device */
uint32_t BlockSize; /**< Number of bytes in each block in the addressed LUN */
} SCSI_Capacity_t;
/* Enums: */
/** CSW status return codes, indicating the overall status of the issued CBW */
enum MassStorageHost_CommandStatusCodes_t
{
Command_Pass = 0, /**< Command completed successfully */
Command_Fail = 1, /**< Command failed to complete successfully */
Phase_Error = 2 /**< Phase error while processing the issued command */
};
/* External Variables: */
extern CommandStatusWrapper_t SCSICommandStatus;
/* Function Prototypes: */
#if defined(INCLUDE_FROM_MASSSTORE_COMMANDS_C)
static uint8_t MassStore_SendCommand(void);
static uint8_t MassStore_WaitForDataReceived(void);
static uint8_t MassStore_SendReceiveData(void* BufferPtr) ATTR_NON_NULL_PTR_ARG(1);
static uint8_t MassStore_GetReturnedStatus(void);
#endif
uint8_t MassStore_MassStorageReset(void);
uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex);
uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)
ATTR_NON_NULL_PTR_ARG(2);
uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr) ATTR_NON_NULL_PTR_ARG(5);
uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr) ATTR_NON_NULL_PTR_ARG(5);
uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const CapacityPtr)
ATTR_NON_NULL_PTR_ARG(2);
uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex);
uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool PreventRemoval);
#endif

85
Demos/Host/ClassDriver/MassStorageHost/Lib/SCSI_Codes.h
View File

@ -1,85 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header containing macros for possible SCSI commands and SENSE data. Refer to
* the SCSI standard documentation for more information on each SCSI command and
* the SENSE data.
*/
#ifndef _SCSI_CODES_H_
#define _SCSI_CODES_H_
/* Macros: */
#define SCSI_CMD_INQUIRY 0x12
#define SCSI_CMD_REQUEST_SENSE 0x03
#define SCSI_CMD_TEST_UNIT_READY 0x00
#define SCSI_CMD_READ_CAPACITY_10 0x25
#define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
#define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
#define SCSI_CMD_WRITE_10 0x2A
#define SCSI_CMD_READ_10 0x28
#define SCSI_CMD_WRITE_6 0x0A
#define SCSI_CMD_READ_6 0x08
#define SCSI_CMD_VERIFY_10 0x2F
#define SCSI_CMD_MODE_SENSE_6 0x1A
#define SCSI_CMD_MODE_SENSE_10 0x5A
#define SCSI_SENSE_KEY_GOOD 0x00
#define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
#define SCSI_SENSE_KEY_NOT_READY 0x02
#define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
#define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
#define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
#define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
#define SCSI_SENSE_KEY_DATA_PROTECT 0x07
#define SCSI_SENSE_KEY_BLANK_CHECK 0x08
#define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
#define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
#define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
#define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
#define SCSI_SENSE_KEY_MISCOMPARE 0x0E
#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
#define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
#define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
#define SCSI_ASENSE_WRITE_PROTECTED 0x27
#define SCSI_ASENSE_FORMAT_ERROR 0x31
#define SCSI_ASENSE_INVALID_COMMAND 0x20
#define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
#define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
#define SCSI_ASENSEQ_NO_QUALIFIER 0x00
#define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
#define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
#endif

380
Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c
View File

@ -1,380 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the MassStorageHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "MassStorageHost.h"
/* Globals */
/** Index of the highest available LUN (Logical Unit) in the attached Mass Storage Device */
uint8_t MassStore_MaxLUNIndex;
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mass Storage Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
MassStorage_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
Buttons_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read in blocks from
* the device and print them to the serial port.
*/
void MassStorage_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Mass Storage Disk Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* Indicate device busy via the status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)
{
ShowDiskReadError(PSTR("Get Max LUN"), false, ErrorCode);
break;
}
/* Print number of LUNs detected in the attached device */
printf_P(PSTR("Total LUNs: %d.\r\n"), (MassStore_MaxLUNIndex + 1));
/* Reset the Mass Storage device interface, ready for use */
if ((ErrorCode = MassStore_MassStorageReset()) != HOST_SENDCONTROL_Successful)
{
ShowDiskReadError(PSTR("Mass Storage Reset"), false, ErrorCode);
break;
}
/* Get sense data from the device - many devices will not accept any other commands until the sense data
* is read - both on start-up and after a failed command */
SCSI_Request_Sense_Response_t SenseData;
if (((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0) || (SCSICommandStatus.Status != Command_Pass))
{
ShowDiskReadError(PSTR("Request Sense"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);
break;
}
/* Set the prevent removal flag for the device, allowing it to be accessed */
if (((ErrorCode = MassStore_PreventAllowMediumRemoval(0, true)) != 0) || (SCSICommandStatus.Status != Command_Pass))
{
ShowDiskReadError(PSTR("Prevent/Allow Medium Removal"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);
break;
}
puts_P(PSTR("Waiting until ready.."));
/* Wait until disk ready */
do
{
Serial_TxByte('.');
if ((ErrorCode = MassStore_TestUnitReady(0)) != 0)
{
ShowDiskReadError(PSTR("Test Unit Ready"), false, ErrorCode);
break;
}
}
while ((SCSICommandStatus.Status != Command_Pass) && USB_IsConnected);
/* Abort if device removed */
if (!(USB_IsConnected))
break;
puts_P(PSTR("\r\nRetrieving Capacity... "));
/* Create new structure for the disk's capacity in blocks and block size */
SCSI_Capacity_t DiskCapacity;
/* Retrieve disk capacity */
if (((ErrorCode = MassStore_ReadCapacity(0, &DiskCapacity)) != 0) || (SCSICommandStatus.Status != Command_Pass))
{
ShowDiskReadError(PSTR("Read Capacity"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);
break;
}
/* Display the disk capacity in blocks * block size bytes */
printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
/* Create a new buffer capabable of holding a single block from the device */
uint8_t BlockBuffer[DiskCapacity.BlockSize];
/* Read in the first 512 byte block from the device */
if (((ErrorCode = MassStore_ReadDeviceBlock(0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0) ||
(SCSICommandStatus.Status != Command_Pass))
{
ShowDiskReadError(PSTR("Read Device Block"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);
break;
}
puts_P(PSTR("\r\nContents of first block:\r\n"));
/* Print out the first block in both HEX and ASCII, 16 bytes per line */
for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
{
/* Pointer to the start of the current 16-byte chunk in the read block of data */
uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
/* Print out the 16 bytes of the chunk in HEX format */
for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
{
char CurrByte = *(ChunkPtr + ByteOffset);
printf_P(PSTR("%.2X "), CurrByte);
}
puts_P(PSTR(" "));
/* Print out the 16 bytes of the chunk in ASCII format */
for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
{
char CurrByte = *(ChunkPtr + ByteOffset);
putchar(isprint(CurrByte) ? CurrByte : '.');
}
puts_P(PSTR("\r\n"));
}
puts_P(PSTR("\r\n\r\nPress board button to read entire ASCII contents of disk...\r\n\r\n"));
/* Wait for the board button to be pressed */
while (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
{
/* Abort if device removed */
if (!(USB_IsConnected))
break;
}
/* Print out the entire disk contents in ASCII format */
for (uint32_t CurrBlock = 0; CurrBlock < DiskCapacity.Blocks; CurrBlock++)
{
/* Read in the next block of data from the device */
if (((ErrorCode = MassStore_ReadDeviceBlock(0, CurrBlock, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0) ||
(SCSICommandStatus.Status != Command_Pass))
{
ShowDiskReadError(PSTR("Read Device Block"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);
break;
}
/* Send the ASCII data in the read in block to the serial port */
for (uint16_t Byte = 0; Byte < DiskCapacity.BlockSize; Byte++)
{
char CurrByte = BlockBuffer[Byte];
putchar(isprint(CurrByte) ? CurrByte : '.');
}
/* Abort if device removed */
if (!(USB_IsConnected))
break;
}
/* Indicate device no longer busy */
LEDs_SetAllLEDs(LEDMASK_USB_READY);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
}
/** Indicates that a communication error has occurred with the attached Mass Storage Device,
* printing error codes to the serial port and waiting until the device is removed before
* continuing.
*
* \param CommandString ASCII string located in PROGMEM space indicating what operation failed
* \param FailedAtSCSILayer Indicates if the command failed at the (logical) SCSI layer or at the physical USB layer
* \param ErrorCode Error code of the function which failed to complete successfully
*/
void ShowDiskReadError(char* CommandString, bool FailedAtSCSILayer, uint8_t ErrorCode)
{
if (FailedAtSCSILayer)
{
/* Display the error code */
printf_P(PSTR(ESC_BG_RED "SCSI command error (%S).\r\n"), CommandString);
printf_P(PSTR(" -- Status Code: %d"), ErrorCode);
}
else
{
/* Display the error code */
printf_P(PSTR(ESC_BG_RED "Command error (%S).\r\n"), CommandString);
printf_P(PSTR(" -- Error Code: %d"), ErrorCode);
}
Pipe_Freeze();
/* Indicate device error via the status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
}

85
Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h
View File

@ -1,85 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for MassStoreHost.c.
*/
#ifndef _MASS_STORE_HOST_H_
#define _MASS_STORE_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <stdio.h>
#include <ctype.h>
#include "Lib/MassStoreCommands.h"
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/MassStorage.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY (LEDS_LED2)
/* Function Prototypes: */
void MassStorage_Task(void);
void SetupHardware(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void ShowDiskReadError(char* CommandString, bool FailedAtSCSILayer, uint8_t ErrorCode);
#endif

61
Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
View File

@ -1,61 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mass Storage Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Mass Storage Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Bulk Only</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Mass Storage Standard</td>
* <td>USB Bulk-Only Transport Standard</td>
* <td>SCSI Primary Commands Specification</td>
* <td>SCSI Block Commands Specification</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Mass Storage host demonstration application. This gives a simple reference
* application for implementing a USB Mass Storage host, for USB storage devices
* using the standard Mass Storage USB profile.
*
* The first 512 bytes (boot sector) of an attached disk's memory will be dumped
* out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
* AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
* of the disk will be dumped to the serial port.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

741
Demos/Host/ClassDriver/MassStorageHost/makefile
View File

@ -1,741 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = MassStorageHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=2000
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Lib/MassStoreCommands.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MassStorage.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/MassStorage.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

1485
Demos/Host/ClassDriver/MouseHost/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

283
Demos/Host/ClassDriver/MouseHost/MouseHost.c
View File

@ -1,283 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the MouseHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "MouseHost.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mouse HID Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
Mouse_HID_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("Device Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Reads in and processes the next report from the attached device, displaying the report
* contents on the board LEDs and via the serial port.
*/
void ReadNextReport(void)
{
USB_MouseReport_Data_t MouseReport;
uint8_t LEDMask = LEDS_NO_LEDS;
/* Select mouse data pipe */
Pipe_SelectPipe(MOUSE_DATAPIPE);
/* Unfreeze keyboard data pipe */
Pipe_Unfreeze();
/* Check to see if a packet has been received */
if (!(Pipe_IsINReceived()))
{
/* Refreeze HID data IN pipe */
Pipe_Freeze();
return;
}
/* Ensure pipe contains data before trying to read from it */
if (Pipe_IsReadWriteAllowed())
{
/* Read in mouse report data */
Pipe_Read_Stream_LE(&MouseReport, sizeof(MouseReport));
/* Alter status LEDs according to mouse X movement */
if (MouseReport.X > 0)
LEDMask |= LEDS_LED1;
else if (MouseReport.X < 0)
LEDMask |= LEDS_LED2;
/* Alter status LEDs according to mouse Y movement */
if (MouseReport.Y > 0)
LEDMask |= LEDS_LED3;
else if (MouseReport.Y < 0)
LEDMask |= LEDS_LED4;
/* Alter status LEDs according to mouse button position */
if (MouseReport.Button)
LEDMask = LEDS_ALL_LEDS;
LEDs_SetAllLEDs(LEDMask);
/* Print mouse report data through the serial port */
printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
MouseReport.Y,
MouseReport.Button);
}
/* Clear the IN endpoint, ready for next data packet */
Pipe_ClearIN();
/* Refreeze mouse data pipe */
Pipe_Freeze();
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* HID reports from the device and display the results onto the board LEDs.
*/
void Mouse_HID_Task(void)
{
uint8_t ErrorCode;
/* Switch to determine what user-application handled host state the host state machine is in */
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
/* HID class request to set the mouse protocol to the Boot Protocol */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetProtocol,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Protocol).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Mouse Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* If a report has been received, read and process it */
ReadNextReport();
break;
}
}

96
Demos/Host/ClassDriver/MouseHost/MouseHost.h
View File

@ -1,96 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for MouseHost.c.
*/
#ifndef _MOUSE_HOST_H_
#define _MOUSE_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include <avr/power.h>
#include <stdio.h>
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/HID.h>
#include "ConfigDescriptor.h"
/* Macros: */
/** Pipe number for the mouse data IN pipe */
#define MOUSE_DATAPIPE 1
/** HID Class Specific request to set the report protocol mode */
#define REQ_SetProtocol 0x0B
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Type Defines: */
/** Type define for a standard Boot Protocol Mouse report */
typedef struct
{
uint8_t Button; /**< Button mask for currently pressed buttons in the mouse */
int8_t X; /**< Current delta X movement of the mouse */
int8_t Y; /**< Current delta Y movement on the mouse */
} USB_MouseReport_Data_t;
/* Function Prototypes: */
void Mouse_HID_Task(void);
void SetupHardware(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void ReadNextReport(void);
#endif

65
Demos/Host/ClassDriver/MouseHost/MouseHost.txt
View File

@ -1,65 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mouse Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Mouse host demonstration application. This gives a simple reference
* application for implementing a USB Mouse host, for USB mice using
* the standard mouse HID profile.
*
* Mouse movement and button presses are displayed on the board LEDs,
* as well as printed out the serial terminal as formatted dY, dY and
* button status information.
*
* This uses a naive method where the mouse is set to Boot Protocol mode, so
* that the report structure is fixed and known. A better implementation
* uses the HID report parser for correct report data processing across
* all compatible mice with advanced characteristics, as shown in the
* MouseHostWithParser demo application.
*
* Currently only single interface mice are supported.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

740
Demos/Host/ClassDriver/MouseHost/makefile
View File

@ -1,740 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = MouseHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

1485
Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

71
Demos/Host/ClassDriver/MouseHostWithParser/HIDReport.c
View File

@ -1,71 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "HIDReport.h"
/** Size in bytes of the attached device's HID report descriptor */
uint16_t HIDReportSize;
/** Processed HID report descriptor items structure, containing information on each HID report element */
HID_ReportInfo_t HIDReportInfo;
/** Function to read in the HID report descriptor from the attached device, and process it into easy-to-read
* structures via the HID parser routines in the LUFA library.
*
* \return A value from the MouseHostWithParser_GetHIDReportDataCodes_t enum
*/
uint8_t GetHIDReportData(void)
{
/* Create a buffer big enough to hold the entire returned HID report */
uint8_t HIDReportData[HIDReportSize];
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Report << 8),
.wIndex = 0,
.wLength = HIDReportSize,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send control request to retrieve the HID report from the attached device */
if (USB_Host_SendControlRequest(HIDReportData) != HOST_SENDCONTROL_Successful)
return ParseControlError;
/* Send the HID report to the parser for processing */
if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful)
return ParseError;
return ParseSuccessful;
}

89
Demos/Host/ClassDriver/MouseHostWithParser/HIDReport.h
View File

@ -1,89 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for HIDReport.c.
*/
#ifndef _HID_REPORT_H_
#define _HID_REPORT_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/Host/HID.h>
#include "MouseHostWithParser.h"
/* Macros: */
/** HID Report Descriptor Usage Page value for a toggle button */
#define USAGE_PAGE_BUTTON 0x09
/** HID Report Descriptor Usage Page value for a Generic Desktop Control */
#define USAGE_PAGE_GENERIC_DCTRL 0x01
/** HID Report Descriptor Usage value for a X axis movement */
#define USAGE_X 0x30
/** HID Report Descriptor Usage value for a Y axis movement */
#define USAGE_Y 0x31
/* Enums: */
/** Enum for the possible return codes of the GetHIDReportData() function. */
enum MouseHostWithParser_GetHIDReportDataCodes_t
{
ParseSuccessful = 0, /**< HID report descriptor parsed successfully */
ParseError = 1, /**< Failed to fully process the HID report descriptor */
ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */
};
/* Type Defines: */
/** Type define for a HID descriptor. */
typedef struct
{
USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */
uint16_t HIDSpec; /**< Implemented HID class specification, in BCD encoded format */
uint8_t CountryCode; /**< Country code value for localized hardware */
uint8_t TotalHIDDescriptors; /**< Total number of HID report descriptors in the current interface */
uint8_t HIDReportType; /**< HID report type of the first HID report descriptor */
uint16_t HIDReportLength; /**< Total size in bytes of the first HID report descriptor */
} USB_Descriptor_HID_t;
/* External Variables: */
extern uint16_t HIDReportSize;
extern HID_ReportInfo_t HIDReportInfo;
/* Function Prototypes: */
uint8_t GetHIDReportData(void);
#endif

305
Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c
View File

@ -1,305 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the MouseHostWithParser demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "MouseHostWithParser.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mouse HID Parser Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
Mouse_HID_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("Device Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* the HID report descriptor and HID reports from the device and display the results onto the board LEDs.
*/
void Mouse_HID_Task(void)
{
uint8_t ErrorCode;
/* Switch to determine what user-application handled host state the host state machine is in */
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Processing HID Report.\r\n"));
/* Get and process the device's first HID report descriptor */
if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
{
puts_P(PSTR("Report Parse Error.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Mouse Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* Select and unfreeze mouse data pipe */
Pipe_SelectPipe(MOUSE_DATAPIPE);
Pipe_Unfreeze();
/* Check to see if a packet has been received */
if (Pipe_IsINReceived())
{
/* Check if data has been received from the attached mouse */
if (Pipe_IsReadWriteAllowed())
{
/* Create buffer big enough for the report */
uint8_t MouseReport[Pipe_BytesInPipe()];
/* Load in the mouse report */
Pipe_Read_Stream_LE(MouseReport, Pipe_BytesInPipe());
/* Process the read in mouse report from the device */
ProcessMouseReport(MouseReport);
}
/* Clear the IN endpoint, ready for next data packet */
Pipe_ClearIN();
}
/* Freeze mouse data pipe */
Pipe_Freeze();
break;
}
}
/** Processes a read HID report from an attached mouse, extracting out elements via the HID parser results
* as required and displays movement and button presses on the board LEDs.
*
* \param MouseReport Pointer to a HID report from an attached mouse device
*/
void ProcessMouseReport(uint8_t* MouseReport)
{
uint8_t LEDMask = LEDS_NO_LEDS;
/* Check each HID report item in turn, looking for mouse X/Y/button reports */
for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
{
/* Create a temporary item pointer to the next report item */
HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
bool FoundData;
if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) &&
(ReportItem->ItemType == REPORT_ITEM_TYPE_In))
{
/* Get the mouse button value */
FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem);
/* For multi-report devices - if the requested data was not in the issued report, continue */
if (!(FoundData))
continue;
/* If button is pressed, all LEDs are turned on */
if (ReportItem->Value)
LEDMask = LEDS_ALL_LEDS;
}
else if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL) &&
((ReportItem->Attributes.Usage.Usage == USAGE_X) ||
(ReportItem->Attributes.Usage.Usage == USAGE_Y)) &&
(ReportItem->ItemType == REPORT_ITEM_TYPE_In))
{
/* Get the mouse relative position value */
FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem);
/* For multi-report devices - if the requested data was not in the issued report, continue */
if (!(FoundData))
continue;
int16_t DeltaMovement;
if (ReportItem->Attributes.BitSize > 8)
DeltaMovement = (int16_t)ReportItem->Value;
else
DeltaMovement = (int8_t)ReportItem->Value;
/* Determine if the report is for the X or Y delta movement */
if (ReportItem->Attributes.Usage.Usage == USAGE_X)
{
/* Turn on the appropriate LED according to direction if the delta is non-zero */
if (DeltaMovement)
LEDMask |= ((DeltaMovement > 0) ? LEDS_LED1 : LEDS_LED2);
}
else
{
/* Turn on the appropriate LED according to direction if the delta is non-zero */
if (DeltaMovement)
LEDMask |= ((DeltaMovement > 0) ? LEDS_LED3 : LEDS_LED4);
}
}
}
/* Display the button information on the board LEDs */
LEDs_SetAllLEDs(LEDMask);
}

78
Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h
View File

@ -1,78 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#ifndef _MOUSE_HOST_H_
#define _MOUSE_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <stdio.h>
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/HID.h>
#include "HIDReport.h"
/* Macros: */
/** Pipe number for the mouse report data pipe */
#define MOUSE_DATAPIPE 1
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void Mouse_HID_Task(void);
void SetupHardware(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void ProcessMouseReport(uint8_t* MouseReport);
#endif

62
Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt
View File

@ -1,62 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mouse Host With HID Descriptor Parser Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Mouse host demonstration application. This gives a simple reference
* application for implementing a USB Mouse host, for USB mice using
* the standard mouse HID profile. It uses a HID parser for the HID
* reports, allowing for correct operation across all USB mice. This
* demo supports mice with a single HID report.
*
* Mouse movement and button presses are displayed on the board LEDs.
* On connection to a USB mouse, the report items will be processed and
* printed as a formatted list through the USART before the mouse is
* fully enumerated.
*
* Currently only single interface mice are supported.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

741
Demos/Host/ClassDriver/MouseHostWithParser/makefile
View File

@ -1,741 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = MouseHostWithParser
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
HIDReport.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

1485
Demos/Host/ClassDriver/StillImageHost/Doxygen.conf
View File

File diff suppressed because it is too large Load Diff

51
Demos/Host/ClassDriver/StillImageHost/Lib/PIMACodes.h
View File

@ -1,51 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header containing macros for possible PIMA commands. Refer to the PIMA standard
* documentation for more information on each PIMA command.
*/
#ifndef _PIMA_CODES_H_
/* Macros: */
#define PIMA_OPERATION_GETDEVICEINFO 0x1001
#define PIMA_OPERATION_OPENSESSION 0x1002
#define PIMA_OPERATION_CLOSESESSION 0x1003
#define PIMA_RESPONSE_OK 0x2001
#define PIMA_RESPONSE_GENERALERROR 0x2002
#define PIMA_RESPONSE_SESSIONNOTOPEN 0x2003
#define PIMA_RESPONSE_INVALIDTRANSACTIONID 0x2004
#define PIMA_RESPONSE_OPERATIONNOTSUPPORTED 0x2005
#define PIMA_RESPONSE_PARAMETERNOTSUPPORTED 0x2006
#endif

279
Demos/Host/ClassDriver/StillImageHost/Lib/StillImageCommands.c
View File

@ -1,279 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Still Image Device commands, to issue PIMA commands to the device for
* reading device status, capacity, and other characteristics as well as
* reading and writing of stored image data.
*/
#include "StillImageCommands.h"
/* Globals: */
/** PIMA block container for the block to send to the device */
PIMA_Container_t PIMA_SendBlock;
/** PIMA block container for the last received block from the device */
PIMA_Container_t PIMA_ReceivedBlock;
/** PIMA block container for the last event block received from the device */
PIMA_Container_t PIMA_EventBlock;
/** Function to send the PIMA command container to the attached still image device. */
void SImage_SendBlockHeader(void)
{
/* Unfreeze the data OUT pipe ready for data transmission */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the PIMA block to the data OUT pipe */
Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0));
/* If the block type is a command, send its parameters (if any) */
if (PIMA_SendBlock.Type == CType_CommandBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_SendBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if any parameters in the command block */
if (ParamBytes)
{
/* Write the PIMA parameters to the data OUT pipe */
Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes);
}
/* Send the PIMA command block to the attached device */
Pipe_ClearOUT();
}
/* Freeze pipe after use */
Pipe_Freeze();
}
/** Function to receive a PIMA event container from the attached still image device. */
void SImage_RecieveEventHeader(void)
{
/* Unfreeze the events pipe */
Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
Pipe_Unfreeze();
/* Read in the event data into the global structure */
Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock));
/* Clear the pipe after read complete to prepare for next event */
Pipe_ClearIN();
/* Freeze the event pipe again after use */
Pipe_Freeze();
}
/** Function to receive a PIMA response container from the attached still image device. */
uint8_t SImage_RecieveBlockHeader(void)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Wait until data received on the IN pipe */
while (!(Pipe_IsReadWriteAllowed()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
{
/* Return error code */
return PIPE_RWSTREAM_Timeout;
}
}
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the OUT pipe */
SImage_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);
/* Return error code and break out of the loop */
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the IN pipe */
SImage_ClearPipeStall(SIMAGE_DATA_IN_PIPE);
/* Return error code */
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
{
/* Return error code */
return PIPE_RWSTREAM_DeviceDisconnected;
}
};
/* Freeze OUT pipe after use */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Freeze();
/* Select the IN data pipe for data reception */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
/* Load in the response from the attached device */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0));
/* Check if the returned block type is a response block */
if (PIMA_ReceivedBlock.Type == CType_ResponseBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if the device has returned any parameters */
if (ParamBytes)
{
/* Read the PIMA parameters from the data IN pipe */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes);
}
/* Clear pipe bank after use */
Pipe_ClearIN();
}
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Function to send the given data to the device, after a command block has been issued.
*
* \param Buffer Source data buffer to send to the device
* \param Bytes Number of bytes to send
*/
void SImage_SendData(void* Buffer, uint16_t Bytes)
{
/* Unfreeze the data OUT pipe */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the data contents to the pipe */
Pipe_Write_Stream_LE(Buffer, Bytes);
/* Send the last packet to the attached device */
Pipe_ClearOUT();
/* Freeze the pipe again after use */
Pipe_Freeze();
}
/** Function to receive the given data to the device, after a response block has been received.
*
* \param Buffer Destination data buffer to put read bytes from the device
* \param Bytes Number of bytes to receive
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes)
{
uint8_t ErrorCode;
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Read in the data into the buffer */
ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes);
/* Freeze the pipe again after use */
Pipe_Freeze();
return ErrorCode;
}
/** Function to test if a PIMA event block is waiting to be read in from the attached device.
*
* \return True if an event is waiting to be read in from the device, false otherwise
*/
bool SImage_IsEventReceived(void)
{
bool IsEventReceived = false;
/* Unfreeze the Event pipe */
Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
Pipe_Unfreeze();
/* If the pipe contains data, an event has been received */
if (Pipe_BytesInPipe())
IsEventReceived = true;
/* Freeze the pipe after use */
Pipe_Freeze();
return IsEventReceived;
}
/** Clears the stall condition in the attached device on the nominated endpoint number.
*
* \param EndpointNum Endpoint number in the attached device whose stall condition is to be cleared
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum
*/
uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
.bRequest = REQ_ClearFeature,
.wValue = FEATURE_ENDPOINT_HALT,
.wIndex = EndpointNum,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(NULL);
}

110
Demos/Host/ClassDriver/StillImageHost/Lib/StillImageCommands.h
View File

@ -1,110 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for StillImageCommands.c.
*/
#ifndef _STILL_IMAGE_COMMANDS_H_
#define _STILL_IMAGE_COMMANDS_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include "PIMACodes.h"
/* Macros: */
/** Pipe number of the Still Image data IN pipe */
#define SIMAGE_DATA_IN_PIPE 0x01
/** Pipe number of the Still Image data OUT pipe */
#define SIMAGE_DATA_OUT_PIPE 0x02
/** Pipe number of the Still Image events pipe */
#define SIMAGE_EVENTS_PIPE 0x03
/** Timeout period between the issuing of a command to a device, and the reception of the first packet */
#define COMMAND_DATA_TIMEOUT_MS 5000
/** Used in the DataLength field of a PIMA container, to give the total container size in bytes for
* a command container.
*
* \param params Number of parameters which are to be sent in the Param field of the container
*/
#define PIMA_COMMAND_SIZE(params) ((sizeof(PIMA_SendBlock) - sizeof(PIMA_SendBlock.Params)) + \
(params * sizeof(PIMA_SendBlock.Params[0])))
/** Used in the DataLength field of a PIMA container, to give the total container size in bytes for
* a data container.
*
* \param datalen Length in bytes of the data in the container
*/
#define PIMA_DATA_SIZE(datalen) ((sizeof(PIMA_SendBlock) - sizeof(PIMA_SendBlock.Params)) + datalen)
/* Type Defines: */
/** Type define for a PIMA container, use to send commands and receive responses to and from an
* attached Still Image device.
*/
typedef struct
{
uint32_t DataLength; /**< Length of the container and data, in bytes */
uint16_t Type; /**< Container type, a value from the PIMA_Container_Types_t enum */
uint16_t Code; /**< Command, event or response code of the container */
uint32_t TransactionID; /**< Unique container ID to link blocks together */
uint32_t Params[4]; /**< Block parameters to be issued along with the block code (command blocks only) */
} PIMA_Container_t;
/* Enums: */
/** Enum for the possible PIMA contains types. */
enum PIMA_Container_Types_t
{
CType_Undefined = 0, /**< Undefined container type */
CType_CommandBlock = 1, /**< Command Block container type */
CType_DataBlock = 2, /**< Data Block container type */
CType_ResponseBlock = 3, /**< Response container type */
CType_EventBlock = 4, /**< Event Block container type */
};
/* External Variables: */
extern PIMA_Container_t PIMA_SendBlock;
extern PIMA_Container_t PIMA_ReceivedBlock;
extern PIMA_Container_t PIMA_EventBlock;
/* Function Prototypes: */
void SImage_SendBlockHeader(void);
uint8_t SImage_RecieveBlockHeader(void);
void SImage_RecieveEventHeader(void);
void SImage_SendData(void* Buffer, uint16_t Bytes);
uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes);
bool SImage_IsEventReceived(void);
uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum);
#endif

382
Demos/Host/ClassDriver/StillImageHost/StillImageHost.c
View File

@ -1,382 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the StillImageHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "StillImageHost.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Still Image Host Demo running.\r\n" ESC_INVERSE_OFF));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
StillImage_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable Clock Division */
CLKPR = (1 << CLKPCE);
CLKPR = 0;
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_DeviceUnattached(void)
{
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to print device information
* through the serial port.
*/
void StillImage_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Send the request, display error and wait for device detach if request fails */
if (USB_Host_SendControlRequest(NULL) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control error.\r\n"));
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Still Image Device Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* Indicate device busy via the status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
puts_P(PSTR("Retrieving Device Info...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
{
.DataLength = PIMA_COMMAND_SIZE(0),
.Type = CType_CommandBlock,
.Code = PIMA_OPERATION_GETDEVICEINFO,
.TransactionID = 0x00000000,
.Params = {},
};
/* Send the GETDEVICEINFO block */
SImage_SendBlockHeader();
/* Receive the response data block */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Calculate the size of the returned device info data structure */
uint16_t DeviceInfoSize = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Create a buffer large enough to hold the entire device info */
uint8_t DeviceInfo[DeviceInfoSize];
/* Read in the data block data (containing device info) */
SImage_ReadData(DeviceInfo, DeviceInfoSize);
/* Once all the data has been read, the pipe must be cleared before the response can be sent */
Pipe_ClearIN();
/* Create a pointer for walking through the info dataset */
uint8_t* DeviceInfoPos = DeviceInfo;
/* Skip over the data before the unicode device information strings */
DeviceInfoPos += 8; // Skip to VendorExtensionDesc String
DeviceInfoPos += ((*DeviceInfoPos << 1) + 1); // Skip over VendorExtensionDesc String
DeviceInfoPos += 2; // Skip over FunctionalMode
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over OperationCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over EventCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over DevicePropCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over ObjectFormatCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over ObjectFormatCode Array
/* Extract and convert the Manufacturer Unicode string to ASCII and print it through the USART */
char Manufacturer[*DeviceInfoPos];
UnicodeToASCII(DeviceInfoPos, Manufacturer);
printf_P(PSTR(" Manufacturer: %s\r\n"), Manufacturer);
DeviceInfoPos += ((*DeviceInfoPos << 1) + 1); // Skip over Manufacturer String
/* Extract and convert the Model Unicode string to ASCII and print it through the USART */
char Model[*DeviceInfoPos];
UnicodeToASCII(DeviceInfoPos, Model);
printf_P(PSTR(" Model: %s\r\n"), Model);
DeviceInfoPos += ((*DeviceInfoPos << 1) + 1); // Skip over Model String
/* Extract and convert the Device Version Unicode string to ASCII and print it through the USART */
char DeviceVersion[*DeviceInfoPos];
UnicodeToASCII(DeviceInfoPos, DeviceVersion);
printf_P(PSTR(" Device Version: %s\r\n"), DeviceVersion);
/* Receive the final response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Verify that the command completed successfully */
if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
{
ShowCommandError(PIMA_ReceivedBlock.Code, true);
break;
}
puts_P(PSTR("Opening Session...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
{
.DataLength = PIMA_COMMAND_SIZE(1),
.Type = CType_CommandBlock,
.Code = PIMA_OPERATION_OPENSESSION,
.TransactionID = 0x00000000,
.Params = {0x00000001},
};
/* Send the OPENSESSION block, open a session with an ID of 0x0001 */
SImage_SendBlockHeader();
/* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Verify that the command completed successfully */
if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
{
ShowCommandError(PIMA_ReceivedBlock.Code, true);
break;
}
puts_P(PSTR("Closing Session...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
{
.DataLength = PIMA_COMMAND_SIZE(1),
.Type = CType_CommandBlock,
.Code = PIMA_OPERATION_CLOSESESSION,
.TransactionID = 0x00000001,
.Params = {0x00000001},
};
/* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
SImage_SendBlockHeader();
/* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Verify that the command completed successfully */
if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
{
ShowCommandError(PIMA_ReceivedBlock.Code, true);
break;
}
puts_P(PSTR("Done.\r\n"));
/* Indicate device no longer busy */
LEDs_SetAllLEDs(LEDMASK_USB_READY);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
}
/** Function to convert a given Unicode encoded string to ASCII. This function will only work correctly on Unicode
* strings which contain ASCII printable characters only.
*
* \param UnicodeString Pointer to a Unicode encoded input string
* \param Buffer Pointer to a buffer where the converted ASCII string should be stored
*/
void UnicodeToASCII(uint8_t* UnicodeString, char* Buffer)
{
/* Get the number of characters in the string, skip to the start of the string data */
uint8_t CharactersRemaining = *(UnicodeString++);
/* Loop through the entire unicode string */
while (CharactersRemaining--)
{
/* Load in the next unicode character (only the lower byte, only Unicode coded ASCII supported) */
*(Buffer++) = *UnicodeString;
/* Jump to the next unicode character */
UnicodeString += 2;
}
/* Null terminate the string */
*Buffer = 0;
}
/** Displays a PIMA command error via the device's serial port.
*
* \param ErrorCode Error code of the function which failed to complete successfully
* \param ResponseCodeError Indicates if the error is due to a command failed indication from the device, or a communication failure
*/
void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError)
{
char* FailureType = ((ResponseCodeError) ? PSTR("Response Code != OK") : PSTR("Transaction Fail"));
printf_P(PSTR(ESC_BG_RED "Command Error (%S).\r\n"), FailureType);
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
}

85
Demos/Host/ClassDriver/StillImageHost/StillImageHost.h
View File

@ -1,85 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for StillImageHost.c.
*/
#ifndef _STILL_IMAGE_HOST_H_
#define _STILL_IMAGE_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <stdio.h>
#include "ConfigDescriptor.h"
#include "Lib/PIMACodes.h"
#include "Lib/StillImageCommands.h"
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/StillImage.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY (LEDS_LED2)
/* Function Prototypes: */
void StillImage_Task(void);
void SetupHardware(void);
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
void UnicodeToASCII(uint8_t* restrict UnicodeString, char* restrict Buffer);
void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError);
#endif

58
Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt
View File

@ -1,58 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Still Image Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Still Image Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Still Image Class Specification</td>
* <td>PIMA 15740 Specification</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Still Image host demonstration application. This gives a simple reference
* application for implementing a Still Image host, for USB devices such as
* digital cameras.
*
* This demo will enumerate an attached USB Still Image device, print out its
* information structure, open a session with the device and finally close the
* session.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

737
Demos/Host/ClassDriver/StillImageHost/makefile
View File

@ -1,737 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = StillImageHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USB_HOST_ONLY
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Lib/StillImageCommands.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/StillImage.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee

46
Demos/Host/ClassDriver/makefile
View File

@ -1,46 +0,0 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2009.
#
# dean [at] fourwalledcubicle [dot] com
# www.fourwalledcubicle.com
#
# Makefile to build all the LUFA Host Demos. Call with "make all" to
# rebuild all Host demos.
# Projects are pre-cleaned before each one is built, to ensure any
# custom LUFA library build options are reflected in the compiled
# code.
all:
make -C CDCHost clean
make -C CDCHost all
make -C GenericHIDHost clean
make -C GenericHIDHost all
make -C KeyboardHost clean
make -C KeyboardHost all
make -C MassStorageHost clean
make -C MassStorageHost all
make -C MouseHost clean
make -C MouseHost all
make -C MouseHostWithParser clean
make -C MouseHostWithParser all
make -C StillImageHost clean
make -C StillImageHost all
%:
make -C CDCHost $@
make -C GenericHIDHost $@
make -C KeyboardHost $@
make -C KeyboardHostWithParser $@
make -C MassStorageHost $@
make -C MouseHost $@
make -C MouseHostWithParser $@
make -C StillImageHost $@

11
Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c
View File

@ -223,18 +223,9 @@ void MassStorage_Task(void)
ShowDiskReadError(PSTR("Inquiry"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);
break;
}
/* VendorID and ProductID are fixed-length non-null terminated strings - need to terminate them before displaying */
char VendorID[9];
char ProductID[17];
memcpy(&VendorID, &InquiryData.VendorID, 8);
memcpy(&ProductID, &InquiryData.ProductID, 16);
VendorID[8] = 0x00;
ProductID[16] = 0x00;
/* Print vendor and product names of attached device */
printf_P(PSTR("Vendor \"%s\", Product \"%s\"\r\n"), VendorID, ProductID);
printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
/* Wait until disk ready */
puts_P(PSTR("Waiting until ready.."));

2
Demos/Host/LowLevel/MassStorageHost/makefile
View File

@ -60,7 +60,7 @@
# MCU name
MCU = at90usb1287
MCU = at90usb647
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

2
LUFA.pnproj
View File

File diff suppressed because one or more lines are too long

2
LUFA/Drivers/USB/Class/Host/CDC.h
View File

@ -80,6 +80,8 @@
struct
{
bool Active; /**< Indicates if the interface is currently active, i.e. attached to the connected device */
uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */
uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the
* CDCDevice_CDC_LineCodingFormats_t enum

2
LUFA/Drivers/USB/LowLevel/HostChapter9.c
View File

@ -46,7 +46,7 @@ uint8_t USB_Host_SendControlRequest(void* BufferPtr)
USB_Host_ResumeBus();
if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
return ReturnStatus;
goto End_Of_Control_Send;
Pipe_SetToken(PIPE_TOKEN_SETUP);
Pipe_ClearErrorFlags();

2
LUFA/Drivers/USB/LowLevel/LowLevel.c
View File

@ -186,6 +186,8 @@ void USB_ResetInterface(void)
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
else
USB_REG_Off();
USB_CLK_Unfreeze();

4
LUFA/ManPages/ChangeLog.txt
View File

@ -34,8 +34,10 @@
* - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use
* - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used
* - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling
* the existing \ref Pipe_SetFiniteINRequests() function
* the existing Pipe_SetFiniteINRequests() function
* - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command
* - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails
* - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used
*
*
* \section Sec_ChangeLog090605 Version 090605

16
LUFA/ManPages/FutureChanges.txt
View File

@ -11,19 +11,23 @@
* If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,
* or post your suggestion as an enhancement request to the project bug tracker.
*
* <b>Targeted for This Release:</b>
* - Make new host class drivers
* - Document new host class drivers
* - Convert Host mode demos to class drivers
* - Re-enable Host mode Class driver builds after completion
* - Add standardized descriptor names to class driver structures, controlled by USE_NONSTANDARD_DESCRIPTOR_NAMES
* - Update Host mode Class Driver demo .txt files
* - Debug mode for pipe/endpoint calls
*
* <b>Targeted for Future Releases:</b>
* - Remake AVRStudio project files
* - Detailed overviews of how each demo works
* - Master LUFA include file
* - Stream reads - return number of bytes not read?
* - Add multiple-report HID demo to the library
* - Add dual role Mouse Host/Keyboard Device demo to the library
* - Add hub support to match Atmel's stack
* - Port LUFA to the AVR32 UC3B series microcontrollers
* - Port LUFA to the Atmel ARM7 series microcontrollers
* - Remake AVRStudio project files
* - Master LUFA include file
* - Debug mode for pipe/endpoint calls
* - Add hub support to match Atmel's stack
* - Update Host mode Class Driver demo .txt files
* - Stream reads - return number of bytes not read?
*/

1
LUFA/ManPages/LUFAPoweredProjects.txt
View File

@ -23,6 +23,7 @@
* - USBFoo, an AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
* - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com
* - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
* - Bumble-B, yet another AT90USB162 development board: http://fletchtronics.net/
*
* \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)
*