eqmk
/
qmk_firmware
forked from mfulz_github/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add VTARGET level detection to the AVRISP project on supported AVR models.

This commit is contained in:
Dean Camera 2009-08-25 14:02:47 +00:00
parent 244bba2097
commit 17d06b8494
4 changed files with 31 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
Projects/AVRISP/AVRISP.c
View File

@ -35,7 +35,6 @@
*/
// TODO: Add in software SPI for lower programming speeds below 125KHz
// TODO: Add in VTARGET detection
// TODO: Add reversed target connector checks
#include "AVRISP.h"
@ -53,7 +52,12 @@ int main(void)
for (;;)
{
Process_AVRISP_Commands();
Process_AVRISP_Commands();
#if defined(ADC)
/* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */
V2Params_SetParameterValue(PARAM_VTARGET, ((5 * 10 * ADC_GetResult()) / 1024));
#endif
USB_USBTask();
}
@ -73,6 +77,13 @@ void SetupHardware(void)
LEDs_Init();
USB_Init();
#if defined(ADC)
/* Initialize the ADC converter for VTARGET level detection on supported AVR models */
ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
ADC_SetupChannel(VTARGET_ADC_CHANNEL);
ADC_StartReading(VTARGET_ADC_CHANNEL | ADC_RIGHT_ADJUSTED | ADC_REFERENCE_AVCC);
#endif
/* Millisecond timer initialization for timeout checking */
OCR0A = ((F_CPU / 64) / 1000);
TCCR0A = (1 << WGM01);

10
Projects/AVRISP/AVRISP.h
View File

@ -46,8 +46,12 @@
#include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/USB.h>
#if defined(ADC)
#include <LUFA/Drivers/Peripheral/ADC.h>
#endif
#include "Lib/V2Protocol.h"
/* Macros: */
@ -61,7 +65,7 @@
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);

10
Projects/AVRISP/AVRISP.txt
View File

@ -60,9 +60,12 @@
*
* Note that this design currently has several limitations:
* - Minimum target clock speed of 500KHz due to hardware SPI used
* - No VTARGET detection and notification
* - No reversed/shorted target connector detection and notification
*
* On AVR models with an ADC converter, ACC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be
* set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models
* without an ADC converter, VTARGET will report at a fixed 5V level.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
@ -88,5 +91,10 @@
* <td>Makefile CDEFS</td>
* <td>Mask for the programmer's target RESET line on the chosen port.</td>
* </tr>
* <tr>
* <td>VTARGET_ADC_CHANNEL</td>
* <td>Makefile CDEFS</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection.</td>
* </tr>
* </table>
*/

3
Projects/AVRISP/makefile
View File

@ -60,7 +60,7 @@
# MCU name
MCU = at90usb647
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
@ -197,6 +197,7 @@ CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA
CDEFS += -DRESET_LINE_PORT=PORTB
CDEFS += -DRESET_LINE_DDR=DDRB
CDEFS += -DRESET_LINE_MASK="(1 << 4)"
CDEFS += -DVTARGET_ADC_CHANNEL=2
# Place -D or -U options here for ASM sources