eqmk/qmk_firmware
1
0
Fork 0
forked from mfulz_github/qmk_firmware
Code Issues Pull Requests Projects Releases Wiki Activity

Remove serial driver use from the AVRISP project now that it is no longer needed.

Browse Source
This commit is contained in:
Dean Camera 2009-12-24 02:27:21 +00:00
parent 9decc2bc59
commit 18b0d408a9
7 changed files with 3 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Projects/AVRISP/AVRISP.c
View File

@ -70,7 +70,6 @@ void SetupHardware(void)
/* Hardware Initialization */ /* Hardware Initialization */
LEDs_Init(); LEDs_Init();
USB_Init(); USB_Init();
Serial_Init(9600, true);
#if defined(ADC) #if defined(ADC)
/* Initialize the ADC converter for VTARGET level detection on supported AVR models */ /* Initialize the ADC converter for VTARGET level detection on supported AVR models */

1
Projects/AVRISP/AVRISP.h
View File

@ -45,7 +45,6 @@
#include "Descriptors.h" #include "Descriptors.h"
#include <LUFA/Version.h> #include <LUFA/Version.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/USB.h>

4
Projects/AVRISP/AVRISP.txt
View File

@ -152,7 +152,7 @@
* </tr> * </tr>
* </table> * </table>
* *
* <b><sup>1</sup></b> <i>When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together * <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
* via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
* *
* \section Sec_TPI TPI Connections * \section Sec_TPI TPI Connections
@ -196,7 +196,7 @@
* </tr> * </tr>
* </table> * </table>
* *
* <b><sup>1</sup></b> <i>When TPI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together * <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
* via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
* *
* \section SSec_Options Project Options * \section SSec_Options Project Options

2
Projects/AVRISP/Lib/V2Protocol.c
View File

@ -51,8 +51,6 @@ void V2Protocol_ProcessCommand(void)
{ {
uint8_t V2Command = Endpoint_Read_Byte(); uint8_t V2Command = Endpoint_Read_Byte();
Serial_TxByte(V2Command);
switch (V2Command) switch (V2Command)
{ {
case CMD_SIGN_ON: case CMD_SIGN_ON:

1
Projects/AVRISP/Lib/V2Protocol.h
View File

@ -39,7 +39,6 @@
/* Includes: */ /* Includes: */
#include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SPI.h> #include <LUFA/Drivers/Peripheral/SPI.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include "../Descriptors.h" #include "../Descriptors.h"
#include "V2ProtocolConstants.h" #include "V2ProtocolConstants.h"

2
Projects/AVRISP/Lib/XPROG/XPROGProtocol.c
View File

@ -44,7 +44,7 @@ uint32_t XPROG_Param_NVMBase = 0x010001C0;
uint32_t XPROG_Param_EEPageSize; uint32_t XPROG_Param_EEPageSize;
/** Currently selected XPROG programming protocol */ /** Currently selected XPROG programming protocol */
uint8_t XPROG_SelectedProtocol; uint8_t XPROG_SelectedProtocol = XPRG_PROTOCOL_PDI;
/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI /** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI

1
Projects/AVRISP/makefile
View File

@ -136,7 +136,6 @@ SRC = $(TARGET).c \
Lib/XPROG/XMEGANVM.c \ Lib/XPROG/XMEGANVM.c \
Lib/XPROG/TPITarget.c \ Lib/XPROG/TPITarget.c \
Lib/XPROG/TINYNVM.c \ Lib/XPROG/TINYNVM.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \