forked from mfulz_github/qmk_firmware
Pseudo-port the host mode demos for possible later multi-arch support.
This commit is contained in:
Dean Camera
parent
65a8d68c57
commit
329629a316
|
|
@ -91,12 +91,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example">
|
||||
<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example.avr8">
|
||||
<require idref="lufa.demos.host.class.android"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.android" caption="Android Accessory Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -106,12 +106,14 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example">
|
||||
<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example.avr8">
|
||||
<require idref="lufa.demos.host.class.audio_input"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.audio_input" caption="Audio Input Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -111,12 +111,14 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@
|
|||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/Board/Buttons.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "Config/AppConfig.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example">
|
||||
<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example.avr8">
|
||||
<require idref="lufa.demos.host.class.audio_output"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.audio_output" caption="Audio Output Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -87,12 +87,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example">
|
||||
<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example.avr8">
|
||||
<require idref="lufa.demos.host.class.joystick_parser"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.joystick_parser" caption="Joystick HID (with parser) Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -83,12 +83,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example">
|
||||
<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example.avr8">
|
||||
<require idref="lufa.demos.host.class.keyboard"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.keyboard" caption="Keyboard HID Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -87,12 +87,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example">
|
||||
<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example.avr8">
|
||||
<require idref="lufa.demos.host.class.keyboard_parser"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -82,12 +82,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@
|
|||
#include <LUFA/Drivers/Board/Buttons.h>
|
||||
#include <LUFA/Drivers/Board/Joystick.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example">
|
||||
<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example.avr8">
|
||||
<require idref="lufa.demos.host.class.midi"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.midi" caption="MIDI Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -82,12 +82,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -49,6 +49,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example">
|
||||
<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example.avr8">
|
||||
<require idref="lufa.demos.host.class.ms"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.ms" caption="Mass Storage Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -83,12 +83,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example">
|
||||
<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example.avr8">
|
||||
<require idref="lufa.demos.host.class.mouse"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.mouse" caption="Mouse HID Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -87,12 +87,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example">
|
||||
<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example.avr8">
|
||||
<require idref="lufa.demos.host.class.mouse_parser"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.mouse_parser" caption="Mouse HID (with parser) Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -82,12 +82,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example">
|
||||
<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example.avr8">
|
||||
<require idref="lufa.demos.host.class.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.printer" caption="Printer Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -117,12 +117,14 @@ void RNDISHost_Task(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example">
|
||||
<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example.avr8">
|
||||
<require idref="lufa.demos.host.class.rndis"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.rndis" caption="RNDIS Ethernet Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -87,12 +87,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example">
|
||||
<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example.avr8">
|
||||
<require idref="lufa.demos.host.class.si"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.si" caption="Still Image Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -87,12 +87,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example">
|
||||
<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example.avr8">
|
||||
<require idref="lufa.demos.host.class.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.class.cdc" caption="Virtual Serial CDC Host Demo (Class Driver APIs)">
|
||||
|
|
|
|||
|
|
@ -58,12 +58,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -52,6 +52,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example">
|
||||
<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.android"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.android" caption="Android Accessory Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -57,12 +57,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example">
|
||||
<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.audio_input"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.audio_input" caption="Audio Input Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -57,12 +57,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/ADC.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/Board/Buttons.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
#include "Config/AppConfig.h"
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example">
|
||||
<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.audio_output"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example">
|
||||
<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.generic_hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
#include "HIDReport.h"
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example">
|
||||
<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.joystick_parser"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.joystick_parser" caption="Joystick HID (with parser) Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example">
|
||||
<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.keyboard"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.keyboard" caption="Keyboard HID Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
#include "HIDReport.h"
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example">
|
||||
<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.keyboard_parser"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@
|
|||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/Board/Buttons.h>
|
||||
#include <LUFA/Drivers/Board/Joystick.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example">
|
||||
<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.midi"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.midi" caption="MIDI Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -63,12 +63,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -55,6 +55,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/Board/Buttons.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example">
|
||||
<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.ms"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.ms" caption="Mass Storage Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example">
|
||||
<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.mouse"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.mouse" caption="Mouse HID Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
#include "HIDReport.h"
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example">
|
||||
<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.mouse_parser"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.mouse_parser" caption="Mouse HID (with parser) Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -52,6 +52,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example">
|
||||
<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.printer" caption="Printer Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "Lib/RNDISCommands.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example">
|
||||
<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.rndis"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.rndis" caption="RNDIS Ethernet Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,13 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable Clock Division */
|
||||
CLKPR = (1 << CLKPCE);
|
||||
CLKPR = 0;
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -51,6 +51,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
/* Macros: */
|
||||
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example">
|
||||
<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.si"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.si" caption="Still Image Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
|
|
@ -59,12 +59,14 @@ int main(void)
|
|||
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||
void SetupHardware(void)
|
||||
{
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
#endif
|
||||
|
||||
/* Hardware Initialization */
|
||||
Serial_Init(9600, false);
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Board/LEDs.h>
|
||||
#include <LUFA/Platform/Platform.h>
|
||||
|
||||
#include "ConfigDescriptor.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example">
|
||||
<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example.avr8">
|
||||
<require idref="lufa.demos.host.lowlevel.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.cdc" caption="Virtual Serial CDC Host Demo (Low Level APIs)">
|
||||
|
|
|
|||
Loading…
Reference in New Issue