eqmk
/
qmk_firmware
forked from mfulz_github/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Use _delay_us() function in the XPROGTarget.c file to ensure timing requirements are met, rather than a fixed number of NOPs.

This commit is contained in:
Dean Camera 2010-01-31 12:33:04 +00:00
parent 75d27f8ef0
commit 331e8dece6
1 changed files with 5 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
View File

@ -152,11 +152,9 @@ void XPROGTarget_EnableTargetPDI(void)
DDRD |= (1 << 5) | (1 << 3);
DDRD &= ~(1 << 2);
/* Set DATA line high for at least 90ns to disable /RESET functionality (note: too long will enable it again,
* so a fixed number of NOPs are used here */
/* Set DATA line high for at least 90ns to disable /RESET functionality */
PORTD |= (1 << 3);
asm volatile ("NOP"::);
asm volatile ("NOP"::);
_delay_us(1);
/* Set up the synchronous USART for XMEGA communications -
8 data bits, even parity, 2 stop bits */
@ -168,11 +166,9 @@ void XPROGTarget_EnableTargetPDI(void)
BITBANG_PDIDATA_DDR |= BITBANG_PDIDATA_MASK;
BITBANG_PDICLOCK_DDR |= BITBANG_PDICLOCK_MASK;
/* Set DATA line high for at least 90ns to disable /RESET functionality (note: too long will enable it again,
* so a fixed number of NOPs are used here */
/* Set DATA line high for at least 90ns to disable /RESET functionality */
BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK;
asm volatile ("NOP"::);
asm volatile ("NOP"::);
_delay_us(1);
/* Fire timer compare channel A ISR to manage the software USART */
OCR1A = BITS_BETWEEN_USART_CLOCKS;
@ -193,7 +189,7 @@ void XPROGTarget_EnableTargetTPI(void)
/* Set /RESET line low for at least 400ns to enable TPI functionality */
AUX_LINE_DDR |= AUX_LINE_MASK;
AUX_LINE_PORT &= ~AUX_LINE_MASK;
_delay_ms(1);
_delay_us(1);
#if defined(XPROG_VIA_HARDWARE_USART)
/* Set Tx and XCK as outputs, Rx as input */