eqmk
/
qmk_firmware
forked from mfulz_github/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski).

This commit is contained in:
Dean Camera 2010-12-12 16:50:45 +00:00
parent b67f9f3669
commit 46677b4589
4 changed files with 40 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
LUFA/ManPages/ChangeLog.txt
View File

@ -31,6 +31,8 @@
* - Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy
* - Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground
* - Fixed broken HID_REQ_GetReport request handler in the Low Level GenericHID demo
* - Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet
* timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski)
*
* \section Sec_ChangeLog101122 Version 101122
* <b>New:</b>

20
Projects/Benito/Benito.c
View File

@ -37,7 +37,7 @@
#include "Benito.h"
/** Circular buffer to hold data from the serial port before it is sent to the host. */
RingBuff_t Tx_Buffer;
RingBuff_t USARTtoUSB_Buffer;
/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */
volatile struct
@ -85,7 +85,7 @@ int main(void)
{
SetupHardware();
RingBuffer_InitBuffer(&Tx_Buffer);
RingBuffer_InitBuffer(&USARTtoUSB_Buffer);
sei();
@ -126,15 +126,25 @@ int main(void)
LEDs_TurnOffLEDs(LEDMASK_RX);
/* Check if the receive buffer flush period has expired */
RingBuff_Count_t BufferCount = RingBuffer_GetCount(&Tx_Buffer);
RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
if (!(--FlushPeriodRemaining) || (BufferCount > 200))
{
/* Echo bytes from the target to the host via the virtual serial port */
if (BufferCount)
{
while (BufferCount--)
CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&Tx_Buffer));
{
/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
{
break;
}
/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
RingBuffer_Remove(&USARTtoUSB_Buffer);
}
LEDs_TurnOnLEDs(LEDMASK_RX);
PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;
}
@ -263,7 +273,7 @@ ISR(USART1_RX_vect, ISR_BLOCK)
uint8_t ReceivedByte = UDR1;
if (USB_DeviceState == DEVICE_STATE_Configured)
RingBuffer_Insert(&Tx_Buffer, ReceivedByte);
RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte);
}
/** Event handler for the CDC Class driver Host-to-Device Line Encoding Changed event.

12
Projects/USBtoSerial/USBtoSerial.c
View File

@ -100,7 +100,17 @@ int main(void)
/* Read bytes from the USART receive buffer into the USB IN endpoint */
while (BufferCount--)
CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer));
{
/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
{
break;
}
/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
RingBuffer_Remove(&USARTtoUSB_Buffer);
}
}
/* Load the next byte from the USART transmit buffer into the USART */

14
Projects/XPLAINBridge/XPLAINBridge.c
View File

@ -136,9 +136,19 @@ void UARTBridge_Task(void)
/* Clear flush timer expiry flag */
TIFR0 |= (1 << TOV0);
/* Read bytes from the UART receive buffer into the USB IN endpoint */
/* Read bytes from the USART receive buffer into the USB IN endpoint */
while (BufferCount--)
CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&UARTtoUSB_Buffer));
{
/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
RingBuffer_Peek(&UARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
{
break;
}
/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
RingBuffer_Remove(&UARTtoUSB_Buffer);
}
}
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);