eqmk
/
qmk_firmware
forked from mfulz_github/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.

This commit is contained in:
Dean Camera 2009-07-13 12:38:30 +00:00
parent 1d26e78258
commit 73d9fafc0f
17 changed files with 827 additions and 902 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Demos/Device/Incomplete/Sideshow/Sideshow.c
View File

@ -131,7 +131,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize);
Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize);
Endpoint_ClearOUT();
}

52
Demos/Device/LowLevel/CDC/CDC.c
View File

@ -50,6 +50,54 @@ CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,
.ParityType = Parity_None,
.DataBits = 8 };
#if 0
/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in
* <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).
*/
static int CDC_putchar (char c, FILE *stream)
{
if (!(USB_IsConnected))
return -1;
Endpoint_SelectEndpoint(CDC_TX_EPNUM);
while (!(Endpoint_IsReadWriteAllowed()));
Endpoint_Write_Byte(c);
Endpoint_ClearIN();
return 0;
}
static int CDC_getchar (FILE *stream)
{
int c;
Endpoint_SelectEndpoint(CDC_RX_EPNUM);
for (;;)
{
if (!(USB_IsConnected))
return -1;
while (!(Endpoint_IsReadWriteAllowed()));
if (!(Endpoint_BytesInEndpoint()))
{
Endpoint_ClearOUT();
}
else
{
c = Endpoint_Read_Byte();
break;
}
}
return c;
}
static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW);
#endif
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@ -208,8 +256,8 @@ void CDC_Task(void)
#if 0
/* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232
handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:
*/
* handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:
*/
USB_Notification_Header_t Notification = (USB_Notification_Header_t)
{
.NotificationType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),

2
Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c
View File

@ -112,7 +112,7 @@ void ProcessRNDISControlMessage(void)
ResponseReady = true;
RNDIS_Initialize_Message_t* INITIALIZE_Message = (RNDIS_Initialize_Message_t*)&RNDISMessageBuffer;
RNDIS_Initialize_Message_t* INITIALIZE_Message = (RNDIS_Initialize_Message_t*)&RNDISMessageBuffer;
RNDIS_Initialize_Complete_t* INITIALIZE_Response = (RNDIS_Initialize_Complete_t*)&RNDISMessageBuffer;
INITIALIZE_Response->MessageType = REMOTE_NDIS_INITIALIZE_CMPLT;

2
LUFA.pnproj
View File

File diff suppressed because one or more lines are too long

2
LUFA/Doxygen.conf
View File

@ -1227,7 +1227,7 @@ PREDEFINED = __DOXYGEN__
# The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition.
EXPAND_AS_DEFINED =
EXPAND_AS_DEFINED = _CALLBACK_PARAM
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are alone

41
LUFA/Drivers/USB/LowLevel/DevChapter9.c
View File

@ -241,45 +241,10 @@ static void USB_Device_GetDescriptor(void)
#if defined(USE_RAM_DESCRIPTORS)
Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize);
#elif defined(USE_EEPROM_DESCRIPTORS)
Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize);
#else
bool SendZLP;
if (USB_ControlRequest.wLength > DescriptorSize)
USB_ControlRequest.wLength = DescriptorSize;
while (USB_ControlRequest.wLength)
{
while (!(Endpoint_IsINReady()))
{
if (Endpoint_IsOUTReceived())
{
Endpoint_ClearOUT();
return;
}
}
while (USB_ControlRequest.wLength && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
{
#if defined (USE_EEPROM_DESCRIPTORS)
Endpoint_Write_Byte(eeprom_read_byte(DescriptorPointer++));
#else
Endpoint_Write_Byte(pgm_read_byte(DescriptorPointer++));
#endif
USB_ControlRequest.wLength--;
}
SendZLP = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
Endpoint_ClearIN();
}
if (SendZLP)
{
while (!(Endpoint_IsINReady()));
Endpoint_ClearIN();
}
while (!(Endpoint_IsOUTReceived()));
Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize);
#endif
Endpoint_ClearOUT();

492
LUFA/Drivers/USB/LowLevel/Endpoint.c
View File

@ -183,428 +183,116 @@ uint8_t Endpoint_Discard_Stream(uint16_t Length
return ENDPOINT_RWSTREAM_NoError;
}
uint8_t Endpoint_Write_Stream_LE(const void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)Buffer;
uint8_t ErrorCode;
#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr++))
#include "Template/Template_Endpoint_RW.c"
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr++))
#include "Template/Template_Endpoint_RW.c"
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr++))
#include "Template/Template_Endpoint_RW.c"
if (Length >= 8)
{
Length -= BytesRemToAlignment;
#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr--))
#include "Template/Template_Endpoint_RW.c"
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr--))
#include "Template/Template_Endpoint_RW.c"
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr--))
#include "Template/Template_Endpoint_RW.c"
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr++) = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_RW.c"
Length -= 8;
#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr++, Endpoint_Read_Byte())
#include "Template/Template_Endpoint_RW.c"
Endpoint_Write_Byte(*(DataStream++));
case 7: Endpoint_Write_Byte(*(DataStream++));
case 6: Endpoint_Write_Byte(*(DataStream++));
case 5: Endpoint_Write_Byte(*(DataStream++));
case 4: Endpoint_Write_Byte(*(DataStream++));
case 3: Endpoint_Write_Byte(*(DataStream++));
case 2: Endpoint_Write_Byte(*(DataStream++));
case 1: Endpoint_Write_Byte(*(DataStream++));
} while (Length >= 8);
}
}
#endif
#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr--) = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_RW.c"
while (Length)
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr--, Endpoint_Read_Byte())
#include "Template/Template_Endpoint_RW.c"
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
else
{
Endpoint_Write_Byte(*(DataStream++));
Length--;
}
}
return ENDPOINT_RWSTREAM_NoError;
}
uint8_t Endpoint_Write_Stream_BE(const void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
uint8_t ErrorCode;
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
Endpoint_Write_Byte(*(DataStream--));
case 7: Endpoint_Write_Byte(*(DataStream--));
case 6: Endpoint_Write_Byte(*(DataStream--));
case 5: Endpoint_Write_Byte(*(DataStream--));
case 4: Endpoint_Write_Byte(*(DataStream--));
case 3: Endpoint_Write_Byte(*(DataStream--));
case 2: Endpoint_Write_Byte(*(DataStream--));
case 1: Endpoint_Write_Byte(*(DataStream--));
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
else
{
Endpoint_Write_Byte(*(DataStream--));
Length--;
}
}
return ENDPOINT_RWSTREAM_NoError;
}
uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)Buffer;
uint8_t ErrorCode;
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
*(DataStream++) = Endpoint_Read_Byte();
case 7: *(DataStream++) = Endpoint_Read_Byte();
case 6: *(DataStream++) = Endpoint_Read_Byte();
case 5: *(DataStream++) = Endpoint_Read_Byte();
case 4: *(DataStream++) = Endpoint_Read_Byte();
case 3: *(DataStream++) = Endpoint_Read_Byte();
case 2: *(DataStream++) = Endpoint_Read_Byte();
case 1: *(DataStream++) = Endpoint_Read_Byte();
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
else
{
*(DataStream++) = Endpoint_Read_Byte();
Length--;
}
}
return ENDPOINT_RWSTREAM_NoError;
}
uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
uint8_t ErrorCode;
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
*(DataStream--) = Endpoint_Read_Byte();
case 7: *(DataStream--) = Endpoint_Read_Byte();
case 6: *(DataStream--) = Endpoint_Read_Byte();
case 5: *(DataStream--) = Endpoint_Read_Byte();
case 4: *(DataStream--) = Endpoint_Read_Byte();
case 3: *(DataStream--) = Endpoint_Read_Byte();
case 2: *(DataStream--) = Endpoint_Read_Byte();
case 1: *(DataStream--) = Endpoint_Read_Byte();
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
else
{
*(DataStream--) = Endpoint_Read_Byte();
Length--;
}
}
return ENDPOINT_RWSTREAM_NoError;
}
#endif
uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length)
{
uint8_t* DataStream = (uint8_t*)Buffer;
bool LastPacketFull = false;
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr++))
#include "Template/Template_Endpoint_Control_W.c"
if (Length > USB_ControlRequest.wLength)
Length = USB_ControlRequest.wLength;
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr++))
#include "Template/Template_Endpoint_Control_W.c"
while (Length && !(Endpoint_IsOUTReceived()))
{
while (!(Endpoint_IsINReady()));
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr++))
#include "Template/Template_Endpoint_Control_W.c"
while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
{
Endpoint_Write_Byte(*(DataStream++));
Length--;
}
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr--))
#include "Template/Template_Endpoint_Control_W.c"
LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
Endpoint_ClearIN();
}
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr--))
#include "Template/Template_Endpoint_Control_W.c"
if (Endpoint_IsOUTReceived())
return ENDPOINT_RWCSTREAM_HostAborted;
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr--))
#include "Template/Template_Endpoint_Control_W.c"
if (LastPacketFull)
{
while (!(Endpoint_IsINReady()));
Endpoint_ClearIN();
}
#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr++) = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_Control_R.c"
while (!(Endpoint_IsOUTReceived()));
#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr++, Endpoint_Read_Byte())
#include "Template/Template_Endpoint_Control_R.c"
return ENDPOINT_RWCSTREAM_NoError;
}
#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr--) = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_Control_R.c"
uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length)
{
uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
bool LastPacketFull = false;
if (Length > USB_ControlRequest.wLength)
Length = USB_ControlRequest.wLength;
while (Length && !(Endpoint_IsOUTReceived()))
{
if (Endpoint_IsINReady())
{
while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
{
Endpoint_Write_Byte(*(DataStream--));
Length--;
}
LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
Endpoint_ClearIN();
}
}
if (Endpoint_IsOUTReceived())
return ENDPOINT_RWCSTREAM_HostAborted;
if (LastPacketFull)
{
while (!(Endpoint_IsINReady()));
Endpoint_ClearIN();
}
while (!(Endpoint_IsOUTReceived()));
return ENDPOINT_RWCSTREAM_NoError;
}
uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length)
{
uint8_t* DataStream = (uint8_t*)Buffer;
while (Length)
{
if (Endpoint_IsOUTReceived())
{
while (Length && Endpoint_BytesInEndpoint())
{
*(DataStream++) = Endpoint_Read_Byte();
Length--;
}
Endpoint_ClearOUT();
}
}
while (!(Endpoint_IsINReady()));
return ENDPOINT_RWCSTREAM_NoError;
}
uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length)
{
uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
while (Length)
{
if (Endpoint_IsOUTReceived())
{
while (Length && Endpoint_BytesInEndpoint())
{
*(DataStream--) = Endpoint_Read_Byte();
Length--;
}
Endpoint_ClearOUT();
}
}
while (!(Endpoint_IsINReady()));
return ENDPOINT_RWCSTREAM_NoError;
}
#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr--, Endpoint_Read_Byte())
#include "Template/Template_Endpoint_Control_R.c"
#endif

284
LUFA/Drivers/USB/LowLevel/Endpoint.h
View File

@ -43,6 +43,20 @@
* Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
*/
/** \ingroup Group_EndpointRW
* @defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to endpoints.
*/
/** \ingroup Group_EndpointRW
* @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
*
* Functions, macros, variables, enums and types related to data reading and writing of data streams from
* and to endpoints.
*/
/** @defgroup Group_EndpointPacketManagement Endpoint Packet Management
*
* Functions, macros, variables, enums and types related to packet management of endpoints.
@ -53,6 +67,8 @@
/* Includes: */
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <stdbool.h>
#include "../../../Common/Common.h"
@ -407,7 +423,7 @@
/** Enum for the possible error return codes of the Endpoint_*_Stream_* functions.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*/
enum Endpoint_Stream_RW_ErrorCodes_t
{
@ -429,7 +445,7 @@
/** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions..
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*/
enum Endpoint_ControlStream_RW_ErrorCodes_t
{
@ -440,7 +456,7 @@
/* Inline Functions: */
/** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \return Next byte in the currently selected endpoint's FIFO buffer
*/
@ -452,7 +468,7 @@
/** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \param[in] Byte Next byte to write into the the currently selected endpoint's FIFO buffer
*/
@ -464,7 +480,7 @@
/** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*/
static inline void Endpoint_Discard_Byte(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_Byte(void)
@ -477,7 +493,7 @@
/** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \return Next word in the currently selected endpoint's FIFO buffer
*/
@ -495,7 +511,7 @@
/** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \return Next word in the currently selected endpoint's FIFO buffer
*/
@ -513,7 +529,7 @@
/** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \param[in] Word Next word to write to the currently selected endpoint's FIFO buffer
*/
@ -527,7 +543,7 @@
/** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \param[in] Word Next word to write to the currently selected endpoint's FIFO buffer
*/
@ -540,7 +556,7 @@
/** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*/
static inline void Endpoint_Discard_Word(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_Word(void)
@ -554,7 +570,7 @@
/** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \return Next double word in the currently selected endpoint's FIFO buffer
*/
@ -578,7 +594,7 @@
/** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \return Next double word in the currently selected endpoint's FIFO buffer
*/
@ -602,7 +618,7 @@
/** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected endpoint's FIFO buffer
*/
@ -618,7 +634,7 @@
/** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
* direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected endpoint's FIFO buffer
*/
@ -633,7 +649,7 @@
/** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointPrimitiveRW
*/
static inline void Endpoint_Discard_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_DWord(void)
@ -669,6 +685,12 @@
#endif
/* Function Prototypes: */
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
#define _CALLBACK_PARAM , StreamCallbackPtr_t Callback
#else
#define _CALLBACK_PARAM
#endif
/** Configures the specified endpoint number with the given endpoint type, direction, bank size
* and banking mode. Endpoints should be allocated in ascending order by their address in the
* device (i.e. endpoint 1 should be configured before endpoint 2 and so on) to prevent fragmentation
@ -694,8 +716,6 @@
bool Endpoint_ConfigureEndpoint(const uint8_t Number, const uint8_t Type, const uint8_t Direction,
const uint16_t Size, const uint8_t Banks);
#if !defined(CONTROL_ONLY_DEVICE)
/** Spinloops until the currently selected non-control endpoint is ready for the next packet of data
* to be read or written to it.
*
@ -720,18 +740,14 @@
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Discard_Stream(uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
);
uint8_t Endpoint_Discard_Stream(uint16_t Length _CALLBACK_PARAM);
/** Writes the given number of bytes to the endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The last packet filled is not automatically sent;
@ -746,7 +762,7 @@
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
@ -754,11 +770,33 @@
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Stream_LE(const void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Endpoint_Write_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** FLASH buffer source version of \ref Endpoint_Write_Stream_LE.
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_PStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The last packet filled is not automatically sent;
@ -773,7 +811,7 @@
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
@ -781,11 +819,33 @@
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Stream_BE(const void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Endpoint_Write_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** FLASH buffer source version of \ref Endpoint_Write_Stream_BE.
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_PStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The last packet is not automatically
@ -800,19 +860,27 @@
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE.
*
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Read_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The last packet is not automatically
@ -827,7 +895,7 @@
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@ -835,13 +903,19 @@
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
#endif
/** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE.
*
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Read_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
@ -853,14 +927,48 @@
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Endpoint_Write_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
*
* \note This routine should only be used on CONTROL type endpoints.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Control_EStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE.
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
* \note This routine should only be used on CONTROL type endpoints.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Control_PStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
@ -872,14 +980,48 @@
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Endpoint_Write_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE.
*
* \note This routine should only be used on CONTROL type endpoints.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Control_EStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE.
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
* \note This routine should only be used on CONTROL type endpoints.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Write_Control_PStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
@ -891,7 +1033,7 @@
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@ -900,6 +1042,22 @@
*/
uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE.
*
* \note This routine should only be used on CONTROL type endpoints.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Read_Control_EStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
@ -910,7 +1068,7 @@
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointRW
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@ -919,6 +1077,22 @@
*/
uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE.
*
* \note This routine should only be used on CONTROL type endpoints.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
uint8_t Endpoint_Read_Control_EStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */

352
LUFA/Drivers/USB/LowLevel/Pipe.c
View File

@ -106,162 +106,6 @@ uint8_t Pipe_WaitUntilReady(void)
}
}
uint8_t Pipe_Write_Stream_LE(const void* Data, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)Data;
uint8_t ErrorCode;
Pipe_SetToken(PIPE_TOKEN_OUT);
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
Pipe_Write_Byte(*(DataStream++));
case 7: Pipe_Write_Byte(*(DataStream++));
case 6: Pipe_Write_Byte(*(DataStream++));
case 5: Pipe_Write_Byte(*(DataStream++));
case 4: Pipe_Write_Byte(*(DataStream++));
case 3: Pipe_Write_Byte(*(DataStream++));
case 2: Pipe_Write_Byte(*(DataStream++));
case 1: Pipe_Write_Byte(*(DataStream++));
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
else
{
Pipe_Write_Byte(*(DataStream++));
Length--;
}
}
return PIPE_RWSTREAM_NoError;
}
uint8_t Pipe_Write_Stream_BE(const void* Data, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)(Data + Length - 1);
uint8_t ErrorCode;
Pipe_SetToken(PIPE_TOKEN_OUT);
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
Pipe_Write_Byte(*(DataStream--));
case 7: Pipe_Write_Byte(*(DataStream--));
case 6: Pipe_Write_Byte(*(DataStream--));
case 5: Pipe_Write_Byte(*(DataStream--));
case 4: Pipe_Write_Byte(*(DataStream--));
case 3: Pipe_Write_Byte(*(DataStream--));
case 2: Pipe_Write_Byte(*(DataStream--));
case 1: Pipe_Write_Byte(*(DataStream--));
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearOUT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
else
{
Pipe_Write_Byte(*(DataStream--));
Length--;
}
}
return PIPE_RWSTREAM_NoError;
}
uint8_t Pipe_Discard_Stream(uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
@ -339,160 +183,64 @@ uint8_t Pipe_Discard_Stream(uint16_t Length
return PIPE_RWSTREAM_NoError;
}
uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)Buffer;
uint8_t ErrorCode;
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*(BufferPtr++))
#include "Template/Template_Pipe_RW.c"
Pipe_SetToken(PIPE_TOKEN_IN);
#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr++))
#include "Template/Template_Pipe_RW.c"
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr++))
#include "Template/Template_Pipe_RW.c"
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*(BufferPtr--))
#include "Template/Template_Pipe_RW.c"
if (Length >= 8)
{
Length -= BytesRemToAlignment;
#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr--))
#include "Template/Template_Pipe_RW.c"
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearIN();
#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr--))
#include "Template/Template_Pipe_RW.c"
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr++) = Pipe_Read_Byte()
#include "Template/Template_Pipe_RW.c"
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr++, Pipe_Read_Byte())
#include "Template/Template_Pipe_RW.c"
Length -= 8;
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr--) = Pipe_Read_Byte()
#include "Template/Template_Pipe_RW.c"
*(DataStream++) = Pipe_Read_Byte();
case 7: *(DataStream++) = Pipe_Read_Byte();
case 6: *(DataStream++) = Pipe_Read_Byte();
case 5: *(DataStream++) = Pipe_Read_Byte();
case 4: *(DataStream++) = Pipe_Read_Byte();
case 3: *(DataStream++) = Pipe_Read_Byte();
case 2: *(DataStream++) = Pipe_Read_Byte();
case 1: *(DataStream++) = Pipe_Read_Byte();
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearIN();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
else
{
*(DataStream++) = Pipe_Read_Byte();
Length--;
}
}
return PIPE_RWSTREAM_NoError;
}
uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
#endif
)
{
uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
uint8_t ErrorCode;
Pipe_SetToken(PIPE_TOKEN_IN);
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearIN();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
*(DataStream--) = Pipe_Read_Byte();
case 7: *(DataStream--) = Pipe_Read_Byte();
case 6: *(DataStream--) = Pipe_Read_Byte();
case 5: *(DataStream--) = Pipe_Read_Byte();
case 4: *(DataStream--) = Pipe_Read_Byte();
case 3: *(DataStream--) = Pipe_Read_Byte();
case 2: *(DataStream--) = Pipe_Read_Byte();
case 1: *(DataStream--) = Pipe_Read_Byte();
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Pipe_IsReadWriteAllowed()))
{
Pipe_ClearIN();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
else
{
*(DataStream--) = Pipe_Read_Byte();
Length--;
}
}
return PIPE_RWSTREAM_NoError;
}
#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr--, Pipe_Read_Byte())
#include "Template/Template_Pipe_RW.c"
#endif

190
LUFA/Drivers/USB/LowLevel/Pipe.h
View File

@ -43,6 +43,20 @@
* Functions, macros, variables, enums and types related to data reading and writing from and to pipes.
*/
/** \ingroup Group_PipeRW
* @defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to pipes.
*/
/** \ingroup Group_PipeRW
* @defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams
*
* Functions, macros, variables, enums and types related to data reading and writing of data streams from
* and to pipes.
*/
/** @defgroup Group_PipePacketManagement Pipe Packet Management
*
* Functions, macros, variables, enums and types related to packet management of pipes.
@ -61,6 +75,8 @@
/* Includes: */
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <stdbool.h>
#include "../../../Common/Common.h"
@ -502,7 +518,7 @@
/* Inline Functions: */
/** Reads one byte from the currently selected pipe's bank, for OUT direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \return Next byte in the currently selected pipe's FIFO buffer
*/
@ -514,7 +530,7 @@
/** Writes one byte from the currently selected pipe's bank, for IN direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \param[in] Byte Next byte to write into the the currently selected pipe's FIFO buffer
*/
@ -526,7 +542,7 @@
/** Discards one byte from the currently selected pipe's bank, for OUT direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*/
static inline void Pipe_Discard_Byte(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_Byte(void)
@ -539,7 +555,7 @@
/** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \return Next word in the currently selected pipe's FIFO buffer
*/
@ -557,7 +573,7 @@
/** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \return Next word in the currently selected pipe's FIFO buffer
*/
@ -575,7 +591,7 @@
/** Writes two bytes to the currently selected pipe's bank in little endian format, for IN
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \param[in] Word Next word to write to the currently selected pipe's FIFO buffer
*/
@ -589,7 +605,7 @@
/** Writes two bytes to the currently selected pipe's bank in big endian format, for IN
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \param[in] Word Next word to write to the currently selected pipe's FIFO buffer
*/
@ -602,7 +618,7 @@
/** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*/
static inline void Pipe_Discard_Word(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_Word(void)
@ -616,7 +632,7 @@
/** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \return Next double word in the currently selected pipe's FIFO buffer
*/
@ -640,7 +656,7 @@
/** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \return Next double word in the currently selected pipe's FIFO buffer
*/
@ -664,7 +680,7 @@
/** Writes four bytes to the currently selected pipe's bank in little endian format, for IN
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer
*/
@ -678,7 +694,7 @@
/** Writes four bytes to the currently selected pipe's bank in big endian format, for IN
* direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer
*/
@ -691,7 +707,7 @@
/** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes.
*
* \ingroup Group_PipeRW
* \ingroup Group_PipePrimitiveRW
*/
static inline void Pipe_Discard_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_DWord(void)
@ -716,6 +732,12 @@
extern uint8_t USB_ControlPipeSize;
/* Function Prototypes: */
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
#define _CALLBACK_PARAM , StreamCallbackPtr_t Callback
#else
#define _CALLBACK_PARAM
#endif
/** Configures the specified pipe number with the given pipe type, token, target endpoint number in the
* attached device, bank size and banking mode. Pipes should be allocated in ascending order by their
* address in the device (i.e. pipe 1 should be configured before pipe 2 and so on) to prevent fragmentation
@ -756,6 +778,28 @@
*/
uint8_t Pipe_WaitUntilReady(void);
/** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
* as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
* user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
* Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready,
* allowing for early aborts of stream transfers.
*
* The callback routine should be created according to the information in \ref Group_StreamCallbacks.
* If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
* disabled and this function has the Callback parameter omitted.
*
* The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
* \ingroup Group_PipeStreamRW
*
* \param[in] Length Number of bytes to send via the currently selected pipe.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Discard_Stream(uint16_t Length _CALLBACK_PARAM);
/** Writes the given number of bytes to the pipe from the given buffer in little endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
* the user is responsible for manually sending the last written packet to the host via the
@ -769,7 +813,7 @@
* The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
* \ingroup Group_PipeRW
* \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
@ -777,11 +821,33 @@
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Write_Stream_LE(const void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Pipe_Write_Stream_LE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Pipe_Write_Stream_LE.
*
* \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Write_EStream_LE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** FLASH buffer source version of \ref Pipe_Write_Stream_LE.
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
* \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Write_PStream_LE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the pipe from the given buffer in big endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
@ -796,7 +862,7 @@
* The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
* \ingroup Group_PipeRW
* \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
@ -804,37 +870,33 @@
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Write_Stream_BE(const void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Pipe_Write_Stream_BE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
* as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
* user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
* Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready,
* allowing for early aborts of stream transfers.
/** EEPROM buffer source version of \ref Pipe_Write_Stream_BE.
*
* The callback routine should be created according to the information in \ref Group_StreamCallbacks.
* If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
* disabled and this function has the Callback parameter omitted.
* \ingroup Group_PipeStreamRW
*
* The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
* \ingroup Group_PipeRW
*
* \param[in] Length Number of bytes to send via the currently selected pipe.
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Discard_Stream(uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
);
uint8_t Pipe_Write_EStream_BE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** FLASH buffer source version of \ref Pipe_Write_Stream_BE.
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
* \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Write_PStream_BE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the pipe into the given buffer in little endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
@ -849,7 +911,7 @@
* The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
* \ingroup Group_PipeRW
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
@ -857,11 +919,19 @@
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Pipe_Read_Stream_LE.
*
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Read_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the pipe into the given buffer in big endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
@ -876,7 +946,7 @@
* The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
* \ingroup Group_PipeRW
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
@ -884,11 +954,19 @@
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
, StreamCallbackPtr_t Callback
#endif
) ATTR_NON_NULL_PTR_ARG(1);
uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** EEPROM buffer source version of \ref Pipe_Read_Stream_BE.
*
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t Pipe_Read_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)

27
LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_R.c Normal file
View File

@ -0,0 +1,27 @@
uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length)
{
uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
while (Length)
{
if (Endpoint_IsOUTReceived())
{
while (Length && Endpoint_BytesInEndpoint())
{
TEMPLATE_TRANSFER_BYTE(DataStream);
Length--;
}
Endpoint_ClearOUT();
}
}
while (!(Endpoint_IsINReady()));
return ENDPOINT_RWCSTREAM_NoError;
}
#undef TEMPLATE_BUFFER_OFFSET
#undef TEMPLATE_FUNC_NAME
#undef TEMPLATE_TRANSFER_BYTE

39
LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_W.c Normal file
View File

@ -0,0 +1,39 @@
uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length)
{
uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
bool LastPacketFull = false;
if (Length > USB_ControlRequest.wLength)
Length = USB_ControlRequest.wLength;
while (Length && !(Endpoint_IsOUTReceived()))
{
while (!(Endpoint_IsINReady()));
while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
{
TEMPLATE_TRANSFER_BYTE(DataStream);
Length--;
}
LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
Endpoint_ClearIN();
}
if (Endpoint_IsOUTReceived())
return ENDPOINT_RWCSTREAM_HostAborted;
if (LastPacketFull)
{
while (!(Endpoint_IsINReady()));
Endpoint_ClearIN();
}
while (!(Endpoint_IsOUTReceived()));
return ENDPOINT_RWCSTREAM_NoError;
}
#undef TEMPLATE_BUFFER_OFFSET
#undef TEMPLATE_FUNC_NAME
#undef TEMPLATE_TRANSFER_BYTE

76
LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_RW.c Normal file
View File

@ -0,0 +1,76 @@
uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length _CALLBACK_PARAM)
{
uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
uint8_t ErrorCode;
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Endpoint_IsReadWriteAllowed()))
{
TEMPLATE_CLEAR_ENDPOINT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
TEMPLATE_TRANSFER_BYTE(DataStream);
case 7: TEMPLATE_TRANSFER_BYTE(DataStream);
case 6: TEMPLATE_TRANSFER_BYTE(DataStream);
case 5: TEMPLATE_TRANSFER_BYTE(DataStream);
case 4: TEMPLATE_TRANSFER_BYTE(DataStream);
case 3: TEMPLATE_TRANSFER_BYTE(DataStream);
case 2: TEMPLATE_TRANSFER_BYTE(DataStream);
case 1: TEMPLATE_TRANSFER_BYTE(DataStream);
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Endpoint_IsReadWriteAllowed()))
{
TEMPLATE_CLEAR_ENDPOINT();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return ENDPOINT_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Endpoint_WaitUntilReady()))
return ErrorCode;
}
else
{
TEMPLATE_TRANSFER_BYTE(DataStream);
Length--;
}
}
return ENDPOINT_RWSTREAM_NoError;
}
#undef TEMPLATE_FUNC_NAME
#undef TEMPLATE_TRANSFER_BYTE
#undef TEMPLATE_CLEAR_ENDPOINT
#undef TEMPLATE_BUFFER_OFFSET

78
LUFA/Drivers/USB/LowLevel/Template/Template_Pipe_RW.c Normal file
View File

@ -0,0 +1,78 @@
uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length _CALLBACK_PARAM)
{
uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
uint8_t ErrorCode;
Pipe_SetToken(PIPE_TOKEN_IN);
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
#if defined(FAST_STREAM_TRANSFERS)
uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
if (Length >= 8)
{
Length -= BytesRemToAlignment;
switch (BytesRemToAlignment)
{
default:
do
{
if (!(Pipe_IsReadWriteAllowed()))
{
TEMPLATE_CLEAR_PIPE();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
Length -= 8;
TEMPLATE_TRANSFER_BYTE(DataStream);
case 7: TEMPLATE_TRANSFER_BYTE(DataStream);
case 6: TEMPLATE_TRANSFER_BYTE(DataStream);
case 5: TEMPLATE_TRANSFER_BYTE(DataStream);
case 4: TEMPLATE_TRANSFER_BYTE(DataStream);
case 3: TEMPLATE_TRANSFER_BYTE(DataStream);
case 2: TEMPLATE_TRANSFER_BYTE(DataStream);
case 1: TEMPLATE_TRANSFER_BYTE(DataStream);
} while (Length >= 8);
}
}
#endif
while (Length)
{
if (!(Pipe_IsReadWriteAllowed()))
{
TEMPLATE_CLEAR_PIPE();
#if !defined(NO_STREAM_CALLBACKS)
if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
return PIPE_RWSTREAM_CallbackAborted;
#endif
if ((ErrorCode = Pipe_WaitUntilReady()))
return ErrorCode;
}
else
{
TEMPLATE_TRANSFER_BYTE(DataStream);
Length--;
}
}
return PIPE_RWSTREAM_NoError;
}
#undef TEMPLATE_FUNC_NAME
#undef TEMPLATE_TRANSFER_BYTE
#undef TEMPLATE_CLEAR_PIPE
#undef TEMPLATE_BUFFER_OFFSET

2
LUFA/ManPages/ChangeLog.txt
View File

@ -24,6 +24,8 @@
* - Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the
* device has been removed (for use when an error occurs or communications with the device have completed)
* - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop
* - Added stdio stream demo code to the low-level CDC demo, to show how to create standard streams out of the virtual serial ports
* - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions
*
* <b>Changed:</b>
* - Deprecated psuedo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)

2
LUFA/ManPages/FutureChanges.txt
View File

@ -20,7 +20,6 @@
* -# Update Host mode Class Driver demo .txt files
* - Add standardized descriptor names to device and host class driver structures
* - Add in INTERRUPT_CONTROL_PIPE to use HSOFI to trigger calls to the host state machine
* - Make Suspend host state suspend USB bus frames
* - Add in Stream functions for PROGMEM, EEPROM -- move to templated system
* - Debug mode for pipe/endpoint calls
*
@ -33,6 +32,7 @@
* - Add multiple-report HID demo to the library
* - Add dual role Mouse Host/Keyboard Device demo to the library
* - Add hub support to match Atmel's stack
* - Change makefiles to allow for absolute LUFA location to be used
* - Port LUFA to other architectures
* -# AVR32 UC3B series microcontrollers
* -# Atmel ARM7 series microcontrollers

2
makefile
View File

@ -17,6 +17,8 @@
# to remove all the commands from the output. This gives a much easier to read
# report of the entire build process.
all:
%:
@echo Executing \"make $@\" on all LUFA library elements.
@echo