Fixed incorrect interface values in the VirtualSerialMouse and KeyboardMouse demo class driver structures.

Added caveat information to the CDC device class driver.

Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c

@@ -72,7 +72,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
 	{
 		.Config =
 			{
-				.InterfaceNumber         = 0,
+				.InterfaceNumber              = 1,
 
 				.ReportINEndpointNumber       = MOUSE_IN_EPNUM,
 				.ReportINEndpointSize         = HID_EPSIZE,

Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h

@@ -53,7 +53,7 @@
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Peripheral/SerialStream.h>
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/USB/Class/RNDIS.h>
 

Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c

@@ -246,7 +246,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
 
-			.InterfaceNumber        = 3,
+			.InterfaceNumber        = 2,
 			.AlternateSetting       = 0,
 			
 			.TotalEndpoints         = 1,

Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c

@@ -71,7 +71,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
 	{
 		.Config =
 			{
-				.InterfaceNumber                = 0,
+				.InterfaceNumber                = 2,
 
 				.ReportINEndpointNumber         = MOUSE_EPNUM,
 				.ReportINEndpointSize           = MOUSE_EPSIZE,

LUFA/Doxygen.conf

@@ -872,7 +872,7 @@ GENERATE_HTMLHELP      = NO
 # can add a path in front of the file if the result should not be
 # written to the html output directory.
 
-CHM_FILE               =
+CHM_FILE               = ../LUFA.chm
 
 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
 # be used to specify the location (absolute path including file name) of

LUFA/Drivers/USB/Class/Device/CDC.h

@@ -38,6 +38,23 @@
  *  \section Module Description
  *  Device Mode USB Class driver framework interface, for the CDC USB Class driver.
  *
+ *  \note There are several major drawbacks to the CDC-ACM standard USB class, however
+ *        it is very standardized and thus usually available as a built-in driver on
+ *        most platforms, and so is a better choice than a proprietary serial class.
+ *        
+ *        One major issue with CDC-ACM is that it requires two Interface descriptors,
+ *        which will upset most hosts when part of a multi-function "Composite" USB
+ *        device, as each interface will be loaded into a separate driver instance. To
+ *        conbat this, you should use the "Interface Association Descriptor" addendum to
+ *        the USB standard which is available on most OSes when creating Composite devices.
+ *
+ *        Another major oversight is that there is no mechanism for the host to notify the
+ *        device that there is a data sink on the host side ready to accept data. This
+ *        means that the device may try to send data while the host isn't listening, causing
+ *        lengthy blocking timeouts in the transmission routines. To combat this, it is
+ *        recommended that the virtual serial line DTR (Data Terminal Ready) be used where
+ *        possible to determine if a host application is ready for data.
+ *
  *  @{
  */
  

LUFA/ManPages/ChangeLog.txt

@@ -34,6 +34,7 @@
   *  - Fixed blocking CDC streams not aborting when the host is disconnected
   *  - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands
   *  - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa)
+  *  - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos
   *
   *  \section Sec_ChangeLog091223 Version 091223
   *