forked from mfulz_github/qmk_firmware
Better documentation for the ANSI terminal escape codes header.
Organise the current version changelog better to group core and non-core changes together.
This commit is contained in:
Dean Camera
parent
8f7437dda2
commit
8f981b5f38
|
|
@ -63,143 +63,159 @@
|
|||
/* Public Interface - May be used in end-application: */
|
||||
/* Macros: */
|
||||
#if !defined(DISABLE_TERMINAL_CODES)
|
||||
/** Creates an ANSI escape sequence with the payload specified by "c".
|
||||
/** Creates an ANSI escape sequence with the specified payload.
|
||||
*
|
||||
* \param[in] c Payload to encode as an ANSI escape sequence, a ESC_* mask.
|
||||
* \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a ESC_* mask.
|
||||
*/
|
||||
#define ANSI_ESCAPE_SEQUENCE(c) "\33[" c
|
||||
#define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq
|
||||
#else
|
||||
#define ANSI_ESCAPE_SEQUENCE(c)
|
||||
#define ANSI_ESCAPE_SEQUENCE(EscapeSeq)
|
||||
#endif
|
||||
|
||||
/** \name Text Display Modifier Escape Sequences */
|
||||
//@{
|
||||
/** Turns on bold so that any following text is printed to the terminal in bold. */
|
||||
#define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m")
|
||||
#define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m")
|
||||
|
||||
/** Turns on italics so that any following text is printed to the terminal in italics. */
|
||||
#define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m")
|
||||
#define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m")
|
||||
|
||||
/** Turns on underline so that any following text is printed to the terminal underlined. */
|
||||
#define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m")
|
||||
#define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m")
|
||||
|
||||
/** Turns on inverse so that any following text is printed to the terminal in inverted colours. */
|
||||
#define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m")
|
||||
#define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m")
|
||||
|
||||
/** Turns on strikethrough so that any following text is printed to the terminal with a line through the
|
||||
* center.
|
||||
*/
|
||||
#define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m")
|
||||
#define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m")
|
||||
|
||||
/** Turns off bold so that any following text is printed to the terminal in non bold. */
|
||||
#define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m")
|
||||
#define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m")
|
||||
|
||||
/** Turns off italics so that any following text is printed to the terminal in non italics. */
|
||||
#define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m")
|
||||
#define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m")
|
||||
|
||||
/** Turns off underline so that any following text is printed to the terminal non underlined. */
|
||||
#define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m")
|
||||
#define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m")
|
||||
|
||||
/** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */
|
||||
#define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m")
|
||||
#define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m")
|
||||
|
||||
/** Turns off strikethrough so that any following text is printed to the terminal without a line through
|
||||
* the center.
|
||||
*/
|
||||
#define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m")
|
||||
#define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m")
|
||||
//@}
|
||||
|
||||
/** \name Text Colour Control Sequences */
|
||||
//@{
|
||||
/** Sets the foreground (text) colour to black. */
|
||||
#define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m")
|
||||
#define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m")
|
||||
|
||||
/** Sets the foreground (text) colour to red. */
|
||||
#define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m")
|
||||
#define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m")
|
||||
|
||||
/** Sets the foreground (text) colour to green. */
|
||||
#define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m")
|
||||
#define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m")
|
||||
|
||||
/** Sets the foreground (text) colour to yellow. */
|
||||
#define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m")
|
||||
#define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m")
|
||||
|
||||
/** Sets the foreground (text) colour to blue. */
|
||||
#define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m")
|
||||
#define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m")
|
||||
|
||||
/** Sets the foreground (text) colour to magenta. */
|
||||
#define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m")
|
||||
#define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m")
|
||||
|
||||
/** Sets the foreground (text) colour to cyan. */
|
||||
#define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m")
|
||||
#define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m")
|
||||
|
||||
/** Sets the foreground (text) colour to white. */
|
||||
#define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m")
|
||||
#define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m")
|
||||
|
||||
/** Sets the foreground (text) colour to the terminal's default. */
|
||||
#define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m")
|
||||
#define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m")
|
||||
|
||||
/** Sets the text background colour to black. */
|
||||
#define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m")
|
||||
#define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m")
|
||||
|
||||
/** Sets the text background colour to red. */
|
||||
#define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m")
|
||||
#define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m")
|
||||
|
||||
/** Sets the text background colour to green. */
|
||||
#define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m")
|
||||
#define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m")
|
||||
|
||||
/** Sets the text background colour to yellow. */
|
||||
#define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m")
|
||||
#define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m")
|
||||
|
||||
/** Sets the text background colour to blue. */
|
||||
#define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m")
|
||||
#define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m")
|
||||
|
||||
/** Sets the text background colour to magenta. */
|
||||
#define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m")
|
||||
#define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m")
|
||||
|
||||
/** Sets the text background colour to cyan. */
|
||||
#define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m")
|
||||
#define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m")
|
||||
|
||||
/** Sets the text background colour to white. */
|
||||
#define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m")
|
||||
#define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m")
|
||||
|
||||
/** Sets the text background colour to the terminal's default. */
|
||||
#define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m")
|
||||
#define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m")
|
||||
//@}
|
||||
|
||||
/** \name Cursor Positioning Control Sequences */
|
||||
//@{
|
||||
/** Sets the cursor position to the given line and column. */
|
||||
#define ESC_CURSOR_POS(L, C) ANSI_ESCAPE_SEQUENCE(#L ";" #C "H")
|
||||
|
||||
/** Moves the cursor up the given number of lines. */
|
||||
#define ESC_CURSOR_UP(L) ANSI_ESCAPE_SEQUENCE(#L "A")
|
||||
|
||||
/** Moves the cursor down the given number of lines. */
|
||||
#define ESC_CURSOR_DOWN(L) ANSI_ESCAPE_SEQUENCE(#L "B")
|
||||
|
||||
/** Moves the cursor to the right the given number of columns. */
|
||||
#define ESC_CURSOR_FORWARD(C) ANSI_ESCAPE_SEQUENCE(#C "C")
|
||||
|
||||
/** Moves the cursor to the left the given number of columns. */
|
||||
#define ESC_CURSOR_BACKWARD(C) ANSI_ESCAPE_SEQUENCE(#C "D")
|
||||
|
||||
/** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
|
||||
#define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s")
|
||||
#define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s")
|
||||
|
||||
/** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */
|
||||
#define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u")
|
||||
#define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u")
|
||||
|
||||
/** Sets the cursor position to the given line and column.
|
||||
*
|
||||
* \param[in] Line Line number to position the cursor at
|
||||
* \param[in] Column Column number to position the cursor at
|
||||
*/
|
||||
#define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H")
|
||||
|
||||
/** Moves the cursor up the given number of lines.
|
||||
*
|
||||
* \param[in] Lines Number of lines to move the cursor position
|
||||
*/
|
||||
#define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A")
|
||||
|
||||
/** Moves the cursor down the given number of lines.
|
||||
*
|
||||
* \param[in] Lines Number of lines to move the cursor position
|
||||
*/
|
||||
#define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B")
|
||||
|
||||
/** Moves the cursor to the right the given number of columns.
|
||||
*
|
||||
* \param[in] Columns Number of columns to move the cursor position
|
||||
*/
|
||||
#define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C")
|
||||
|
||||
/** Moves the cursor to the left the given number of columns.
|
||||
*
|
||||
* \param[in] Columns Number of columns to move the cursor position
|
||||
*/
|
||||
#define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D")
|
||||
//@}
|
||||
|
||||
/** \name Miscellaneous Control Sequences */
|
||||
//@{
|
||||
/** Resets any escape sequence modifiers back to their defaults. */
|
||||
#define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m")
|
||||
#define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m")
|
||||
|
||||
/** Erases the entire display, returning the cursor to the top left. */
|
||||
#define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J")
|
||||
#define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J")
|
||||
|
||||
/** Erases the current line, returning the cursor to the far left. */
|
||||
#define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K")
|
||||
#define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K")
|
||||
//@}
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -8,101 +8,107 @@
|
|||
*
|
||||
* \section Sec_ChangeLogXXXXXX Version XXXXXX
|
||||
* <b>New:</b>
|
||||
* - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
|
||||
* not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
|
||||
* - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
|
||||
* - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
|
||||
* - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
|
||||
* handling of USB Start of Frame events while in USB Host mode
|
||||
* - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
|
||||
* Print Host Class driver
|
||||
* - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
|
||||
* - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
|
||||
* - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
|
||||
* - Added board hardware driver support for the Kernel Concepts USBFOO development board
|
||||
* - Added board hardware driver support for the Linnix UDIP development board
|
||||
* - Added board hardware driver support for the Busware BUI development board
|
||||
* - Added board hardware driver support for the Arduino Uno development board
|
||||
* - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
|
||||
* - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
|
||||
* - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
|
||||
* - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
|
||||
* - Added board hardware driver support for the Adafruit U4 breakout board
|
||||
* - Added default test tone generation mode to the Device mode AudioInput demos
|
||||
* - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
|
||||
* tasks for each driver is called
|
||||
* - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
|
||||
* - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
|
||||
* - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
|
||||
* CDC class bootloader
|
||||
* - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
|
||||
* - Core:
|
||||
* - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
|
||||
* not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
|
||||
* - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
|
||||
* - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
|
||||
* - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
|
||||
* handling of USB Start of Frame events while in USB Host mode
|
||||
* - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
|
||||
* Print Host Class driver
|
||||
* - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
|
||||
* - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
|
||||
* - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
|
||||
* - Added board hardware driver support for the Kernel Concepts USBFOO development board
|
||||
* - Added board hardware driver support for the Linnix UDIP development board
|
||||
* - Added board hardware driver support for the Busware BUI development board
|
||||
* - Added board hardware driver support for the Arduino Uno development board
|
||||
* - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
|
||||
* - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
|
||||
* - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
|
||||
* - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
|
||||
* - Added board hardware driver support for the Adafruit U4 breakout board
|
||||
* - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
|
||||
* tasks for each driver is called
|
||||
* - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
|
||||
* - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
|
||||
* - Library Applications:
|
||||
* - Added default test tone generation mode to the Device mode AudioInput demos
|
||||
* - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
|
||||
* CDC class bootloader
|
||||
* - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
|
||||
*
|
||||
* <b>Changed:</b>
|
||||
* - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
|
||||
* depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
|
||||
* with basic code
|
||||
* - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
|
||||
* - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
|
||||
* SCSI_Codes.h file as these values are part of the MassStorage Class Driver
|
||||
* - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
|
||||
* does not exist on these chips (thanks to Marco)
|
||||
* - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
|
||||
* transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
|
||||
* not break communications with the host by exceeding the maximum control request stage timeout period
|
||||
* - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
|
||||
* the need for extra casting inside the callback (thanks to Jonathan Kollasch)
|
||||
* - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
|
||||
* - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
|
||||
* to free up the Start of Frame flag for interrupt use in the user application
|
||||
* - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
|
||||
* - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
|
||||
* - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
|
||||
* - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
|
||||
* - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
|
||||
* - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
|
||||
* - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
|
||||
* the given endpoint
|
||||
* - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
|
||||
* - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
|
||||
* - All LowLevel demos changed to use the constants and types defined in the USB class drivers
|
||||
* - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
|
||||
* - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
|
||||
* - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
|
||||
* - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time
|
||||
* - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets
|
||||
* - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
|
||||
* request handlers, not afterwards
|
||||
* - Core:
|
||||
* - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
|
||||
* depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
|
||||
* with basic code
|
||||
* - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
|
||||
* the need for extra casting inside the callback (thanks to Jonathan Kollasch)
|
||||
* - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
|
||||
* - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
|
||||
* - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
|
||||
* - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
|
||||
* - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
|
||||
* the given endpoint
|
||||
* - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
|
||||
* - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
|
||||
* - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
|
||||
* - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
|
||||
* request handlers, not afterwards
|
||||
* - Library Applications:
|
||||
* - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
|
||||
* - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
|
||||
* SCSI_Codes.h file as these values are part of the MassStorage Class Driver
|
||||
* - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
|
||||
* does not exist on these chips (thanks to Marco)
|
||||
* - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
|
||||
* transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
|
||||
* not break communications with the host by exceeding the maximum control request stage timeout period
|
||||
* - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
|
||||
* to free up the Start of Frame flag for interrupt use in the user application
|
||||
* - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
|
||||
* - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
|
||||
* - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
|
||||
* - All LowLevel demos changed to use the constants and types defined in the USB class drivers
|
||||
* - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
|
||||
* - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
|
||||
* - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time
|
||||
* - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets
|
||||
*
|
||||
* <b>Fixed:</b>
|
||||
* - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
|
||||
* within the supplied report of a multiple report HID device
|
||||
* - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
|
||||
* missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
|
||||
* - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
|
||||
* in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
|
||||
* - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
|
||||
* request handler
|
||||
* - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
|
||||
* - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
|
||||
* - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
|
||||
* - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
|
||||
* - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
|
||||
* - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
|
||||
* - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
|
||||
* - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
|
||||
* - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
|
||||
* - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
|
||||
* - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
|
||||
* - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
|
||||
* - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
|
||||
* - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
|
||||
* - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
|
||||
* - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
|
||||
* - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
|
||||
* - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
|
||||
* - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
|
||||
* - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
|
||||
* - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
|
||||
* - Core:
|
||||
* - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
|
||||
* within the supplied report of a multiple report HID device
|
||||
* - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
|
||||
* in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
|
||||
* - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
|
||||
* - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
|
||||
* - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
|
||||
* - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
|
||||
* - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
|
||||
* - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
|
||||
* - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
|
||||
* - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
|
||||
* - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
|
||||
* - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
|
||||
* - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
|
||||
* - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
|
||||
* - Library Applications:
|
||||
* - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
|
||||
* missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
|
||||
* - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
|
||||
* request handler
|
||||
* - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
|
||||
* - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
|
||||
* - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
|
||||
* - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
|
||||
* - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
|
||||
* - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
|
||||
* - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
|
||||
* - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
|
||||
* - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
|
||||
*
|
||||
* \section Sec_ChangeLog100807 Version 100807
|
||||
* <b>New:</b>
|
||||
|
|
|
|||
Loading…
Reference in New Issue