Added tinyuf2 bootloader version

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/config.h

@@ -0,0 +1,86 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+// #define PRODUCT_ID 0x3836
+// #define DEVICE_VER 0x0001
+// #define PRODUCT Trenctyl Manuform(6x6) BlackPill F01
+
+#define MATRIX_ROW_PINS \
+    { A15, B13, B14, B15, A8, B6, B7 }
+#define MATRIX_COL_PINS \
+    { B10, B0, A1, A0, B4, C14 }
+
+#define MATRIX_ROW_PINS_RIGHT \
+    { A15, B13, B14, B15, A8, B6, B7 }
+#define MATRIX_COL_PINS_RIGHT \
+    { B1, B0, A1, A0, B4, C14 }
+
+#define DIODE_DIRECTION ROW2COL
+
+#define RGB_DI_PIN B3
+#define RGBLED_NUM 74
+#define DRIVER_LED_TOTAL 74
+#define RGB_MATRIX_LED_COUNT 74
+
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT \
+    { 38, 36 }
+#define RGBLIGHT_LIMIT_VAL 200
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
+#define RGB_MATRIX_SPLIT \
+    { 38, 36 }
+#define RGB_MATRIX_CENTER \
+    { 110, 19 }
+
+#define SERIAL_USART_RX_PIN A2
+#define SELECT_SOFT_SERIAL_SPEED 1
+#define FORCED_SYNC_THROTTLE_MS 200
+#define SERIAL_USART_DRIVER SD2
+#define SERIAL_USART_TX_PAL_MODE 7
+#define SERIAL_USART_RX_PAL_MODE 7
+#define SERIAL_USART_TIMEOUT 10
+#define I2C1_SCL_PIN B8
+#define I2C1_SDA_PIN B9
+
+#define PMW33XX_CS_PIN A4
+
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A5
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN A7
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN A6
+#define SPI_MISO_PAL_MODE 5
+
+#define ENCODERS_PAD_A \
+    { C13 }
+#define ENCODERS_PAD_B \
+    { C15 }
+
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+
+// hw rnd generator
+// #define ENC_HW_RND_STM32F4

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/f401.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "6x6.h"

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/halconf.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_I2C TRUE
+#define HAL_USE_SPI TRUE
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/mcuconf.h

@@ -0,0 +1,33 @@
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef STM32_SERIAL_USE_USART2
+#define STM32_SERIAL_USE_USART2 TRUE
+
+#undef STM32_UART_USART2_RX_DMA_STREAM
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#undef STM32_UART_USART2_TX_DMA_STREAM
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SPI_SPI1_RX_DMA_STREAM
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#undef STM32_SPI_SPI1_TX_DMA_STREAM
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
+#undef STM32_ADC_USE_ADC0
+#define STM32_ADC_USE_ADC0 TRUE
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/rules.mk

@@ -0,0 +1,6 @@
+MCU = STM32F401
+
+BOOTLOADER = tinyuf2
+
+LTO_ENABLE = no
+SERIAL_DRIVER = usart

keyboards/handwired/trenctyl_manuform/6x6/info.json

@@ -1,10 +1,10 @@
 {
-    "keyboard_name": "Trenctyl Manuform(6x6) BlackPill F01",
+    "keyboard_name": "Trenctyl Manuform(6x6) BlackPill F401",
     "url": "",
     "usb": {
         "vid": "0x44FD",
         "pid": "0x3836",
-        "device_version": "0.0.1"
+        "device_version": "0.1.0"
     },
     "manufacturer": "mfulz",
     "maintainer": "Matthias Fulz",

keyboards/handwired/trenctyl_manuform/6x6/keymaps/default/keymap.c

@@ -18,6 +18,8 @@
 
 #ifdef RGB_MATRIX_ENABLE
 // clang-format off
+extern rgb_config_t rgb_matrix_config;
+
 led_config_t g_led_config = {{
     {      0,      5,   10,     16,     22,     30,  },
     {      1,      6,   11,     17,     23,     31,  },
@@ -163,10 +165,118 @@ int get_speed_percent(void) {
 static uint16_t _cpi;
 #endif
 
-static uint8_t _vis_timeout_sec;
+static uint16_t _vis_timeout_sec;
 static uint32_t _vis_timer;
 static bool _vis_status;
 
+#if defined(RGB_MATRIX_EFFECT)
+#    undef RGB_MATRIX_EFFECT
+#endif // defined(RGB_MATRIX_EFFECT)
+
+#define RGB_MATRIX_EFFECT(x) RGB_MATRIX_EFFECT_##x,
+enum {
+    RGB_MATRIX_EFFECT_NONE,
+#include "rgb_matrix_effects.inc"
+#undef RGB_MATRIX_EFFECT
+#ifdef RGB_MATRIX_CUSTOM_KB
+#    include "rgb_matrix_kb.inc"
+#endif
+#ifdef RGB_MATRIX_CUSTOM_USER
+#    include "rgb_matrix_user.inc"
+#endif
+};
+
+#define RGB_MATRIX_EFFECT(x)    \
+    case RGB_MATRIX_EFFECT_##x: \
+        return #x;
+const char* rgb_matrix_name(uint8_t effect) {
+    switch (effect) {
+        case RGB_MATRIX_EFFECT_NONE:
+            return "NONE";
+#include "rgb_matrix_effects.inc"
+#undef RGB_MATRIX_EFFECT
+#ifdef RGB_MATRIX_CUSTOM_KB
+#    include "rgb_matrix_kb.inc"
+#endif
+#ifdef RGB_MATRIX_CUSTOM_USER
+#    include "rgb_matrix_user.inc"
+#endif
+        default:
+            return "UNKNOWN";
+    }
+}
+
+void oled_write_rgb_matrix(void) {
+    /*char rgb_matrix_info_str[24] = {0};*/
+    oled_write("RGB: ", false);
+    /*switch (rgb_matrix_config.mode) {*/
+        /*case 1:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Solid Color");*/
+            /*break;*/
+        /*case 2:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Alphas Mods");*/
+            /*break;*/
+        /*case 3:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Gradient up down");*/
+            /*break;*/
+        /*case 4:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Gradient left right");*/
+            /*break;*/
+        /*case 5:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Breathing");*/
+            /*break;*/
+        /*case 6:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Sat");*/
+            /*break;*/
+        /*case 7:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Val");*/
+            /*break;*/
+        /*case 8:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Pinwheel Sat");*/
+            /*break;*/
+        /*case 9:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Pinwheel Val");*/
+            /*break;*/
+        /*case 10:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Spiral Sat");*/
+            /*break;*/
+        /*case 11:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Spiral Val");*/
+            /*break;*/
+        /*case 12:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle All");*/
+            /*break;*/
+        /*case 13:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle left right");*/
+            /*break;*/
+        /*case 14:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle up down");*/
+            /*break;*/
+        /*case 15:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle out in");*/
+            /*break;*/
+        /*case 16:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle out in dual");*/
+            /*break;*/
+        /*case 17:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Rainbow mov chevron");*/
+            /*break;*/
+        /*case 18:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle Pinwheel");*/
+            /*break;*/
+        /*case 19:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle Spiral");*/
+            /*break;*/
+        /*case 20:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Dual Beacon");*/
+            /*break;*/
+        /*default:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "%2d", rgb_matrix_config.mode);*/
+            /*break;*/
+    /*}*/
+    oled_write_ln(rgb_matrix_name(rgb_matrix_config.mode), false);
+}
+
 bool oled_task_user(void) {
     // Host Keyboard Layer Status
     if(is_keyboard_master()) {
@@ -226,7 +336,7 @@ bool oled_task_user(void) {
 #endif
 
         oled_write_P(PSTR("V: "), false);
-        oled_write_P(get_u8_str(_oled_timeout, ' '), false);
+        oled_write_P(get_u16_str(_oled_timeout, ' '), false);
         oled_write_P(PSTR("s\n"), false);
     } else {
 #ifdef ENC_ENABLE
@@ -250,6 +360,8 @@ bool oled_task_user(void) {
             default:
                 oled_write_P(PSTR("Undefined\n"), false);
         }
+
+        oled_write_rgb_matrix();
     }
 
     return true;
@@ -429,7 +541,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 
 void keyboard_pre_init_user(void) {
     _vis_status = true;
-    _vis_timeout_sec = 120;
+    _vis_timeout_sec = 600;
     _vis_timer = timer_read32();
 #ifdef ENC_ENABLE
     pre_init_enc();