forked from mfulz_github/qmk_firmware
Added new GenericHID device demo application.
This commit is contained in:
Dean Camera
parent
d83d87e1b8
commit
dc83f73ca3
|
|
@ -0,0 +1,250 @@
|
|||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2009.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.fourwalledcubicle.com
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, and distribute this software
|
||||
and its documentation for any purpose and without fee is hereby
|
||||
granted, provided that the above copyright notice appear in all
|
||||
copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
*
|
||||
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
|
||||
* computer-readable structures which the host requests upon device enumeration, to determine
|
||||
* the device's capabilities and functions.
|
||||
*/
|
||||
|
||||
#include "Descriptors.h"
|
||||
|
||||
/** HID class report descriptor. This is a special descriptor constructed with values from the
|
||||
* USBIF HID class specification to describe the reports and capabilities of the HID device. This
|
||||
* descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
|
||||
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
|
||||
* more details on HID report descriptors.
|
||||
*/
|
||||
USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
|
||||
{
|
||||
0x06, 0x9c, 0xff, /* Usage Page (Vendor Defined) */
|
||||
0x09, 0x01, /* Usage (Vendor Defined) */
|
||||
0xa1, 0x01, /* Collection (Vendor Defined) */
|
||||
0x09, 0x02, /* Usage (Vendor Defined) */
|
||||
0x75, 0x08, /* Report Size (8) */
|
||||
0x95, GENERIC_REPORT_SIZE, /* Report Count (GENERIC_REPORT_SIZE) */
|
||||
0x15, 0x00, /* Logical Minimum (0) */
|
||||
0x25, 0xff, /* Logical Maximum (255) */
|
||||
0x81, 0x02, /* Input (Data, Variable, Absolute) */
|
||||
0x09, 0x03, /* Usage (Vendor Defined) */
|
||||
0x75, 0x08, /* Report Size (8) */
|
||||
0x95, GENERIC_REPORT_SIZE, /* Report Count (GENERIC_REPORT_SIZE) */
|
||||
0x15, 0x00, /* Logical Minimum (0) */
|
||||
0x25, 0xff, /* Logical Maximum (255) */
|
||||
0x91, 0x02, /* Output (Data, Variable, Absolute) */
|
||||
0xc0 /* End Collection */
|
||||
};
|
||||
|
||||
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
|
||||
* device characteristics, including the supported USB version, control endpoint size and the
|
||||
* number of device configurations. The descriptor is read out by the USB host when the enumeration
|
||||
* process begins.
|
||||
*/
|
||||
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
|
||||
{
|
||||
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
|
||||
|
||||
USBSpecification: VERSION_BCD(01.10),
|
||||
Class: 0x00,
|
||||
SubClass: 0x00,
|
||||
Protocol: 0x00,
|
||||
|
||||
Endpoint0Size: 8,
|
||||
|
||||
VendorID: 0x03EB,
|
||||
ProductID: 0x204F,
|
||||
ReleaseNumber: 0x0000,
|
||||
|
||||
ManufacturerStrIndex: 0x01,
|
||||
ProductStrIndex: 0x02,
|
||||
SerialNumStrIndex: NO_DESCRIPTOR,
|
||||
|
||||
NumberOfConfigurations: 1
|
||||
};
|
||||
|
||||
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
|
||||
* of the device in one of its supported configurations, including information about any device interfaces
|
||||
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
|
||||
* a configuration so that the host may correctly communicate with the USB device.
|
||||
*/
|
||||
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
|
||||
{
|
||||
Config:
|
||||
{
|
||||
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
|
||||
|
||||
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
|
||||
TotalInterfaces: 1,
|
||||
|
||||
ConfigurationNumber: 1,
|
||||
ConfigurationStrIndex: NO_DESCRIPTOR,
|
||||
|
||||
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
|
||||
|
||||
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
|
||||
},
|
||||
|
||||
Interface:
|
||||
{
|
||||
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
|
||||
|
||||
InterfaceNumber: 0x00,
|
||||
AlternateSetting: 0x00,
|
||||
|
||||
TotalEndpoints: 2,
|
||||
|
||||
Class: 0x03,
|
||||
SubClass: 0x00,
|
||||
Protocol: 0x00,
|
||||
|
||||
InterfaceStrIndex: NO_DESCRIPTOR
|
||||
},
|
||||
|
||||
GenericHID:
|
||||
{
|
||||
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
|
||||
|
||||
HIDSpec: VERSION_BCD(01.11),
|
||||
CountryCode: 0x00,
|
||||
TotalHIDReports: 0x01,
|
||||
HIDReportType: DTYPE_Report,
|
||||
HIDReportLength: sizeof(GenericReport)
|
||||
},
|
||||
|
||||
GenericINEndpoint:
|
||||
{
|
||||
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
|
||||
|
||||
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM),
|
||||
Attributes: EP_TYPE_INTERRUPT,
|
||||
EndpointSize: GENERIC_EPSIZE,
|
||||
PollingIntervalMS: 0x02
|
||||
},
|
||||
|
||||
GenericOUTEndpoint:
|
||||
{
|
||||
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
|
||||
|
||||
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | GENERIC_OUT_EPNUM),
|
||||
Attributes: EP_TYPE_INTERRUPT,
|
||||
EndpointSize: GENERIC_EPSIZE,
|
||||
PollingIntervalMS: 0x02
|
||||
}
|
||||
};
|
||||
|
||||
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
|
||||
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
|
||||
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
|
||||
*/
|
||||
USB_Descriptor_String_t PROGMEM LanguageString =
|
||||
{
|
||||
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
|
||||
|
||||
UnicodeString: {LANGUAGE_ID_ENG}
|
||||
};
|
||||
|
||||
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
|
||||
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
|
||||
* Descriptor.
|
||||
*/
|
||||
USB_Descriptor_String_t PROGMEM ManufacturerString =
|
||||
{
|
||||
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
|
||||
|
||||
UnicodeString: L"Dean Camera"
|
||||
};
|
||||
|
||||
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
|
||||
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
|
||||
* Descriptor.
|
||||
*/
|
||||
USB_Descriptor_String_t PROGMEM ProductString =
|
||||
{
|
||||
Header: {Size: USB_STRING_LEN(13), Type: DTYPE_String},
|
||||
|
||||
UnicodeString: L"LUFA HID Demo"
|
||||
};
|
||||
|
||||
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
|
||||
* documentation) by the application code so that the address and size of a requested descriptor can be given
|
||||
* to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
|
||||
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
|
||||
* USB host.
|
||||
*/
|
||||
uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
|
||||
{
|
||||
const uint8_t DescriptorType = (wValue >> 8);
|
||||
const uint8_t DescriptorNumber = (wValue & 0xFF);
|
||||
|
||||
void* Address = NULL;
|
||||
uint16_t Size = NO_DESCRIPTOR;
|
||||
|
||||
switch (DescriptorType)
|
||||
{
|
||||
case DTYPE_Device:
|
||||
Address = DESCRIPTOR_ADDRESS(DeviceDescriptor);
|
||||
Size = sizeof(USB_Descriptor_Device_t);
|
||||
break;
|
||||
case DTYPE_Configuration:
|
||||
Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor);
|
||||
Size = sizeof(USB_Descriptor_Configuration_t);
|
||||
break;
|
||||
case DTYPE_String:
|
||||
switch (DescriptorNumber)
|
||||
{
|
||||
case 0x00:
|
||||
Address = DESCRIPTOR_ADDRESS(LanguageString);
|
||||
Size = pgm_read_byte(&LanguageString.Header.Size);
|
||||
break;
|
||||
case 0x01:
|
||||
Address = DESCRIPTOR_ADDRESS(ManufacturerString);
|
||||
Size = pgm_read_byte(&ManufacturerString.Header.Size);
|
||||
break;
|
||||
case 0x02:
|
||||
Address = DESCRIPTOR_ADDRESS(ProductString);
|
||||
Size = pgm_read_byte(&ProductString.Header.Size);
|
||||
break;
|
||||
}
|
||||
|
||||
break;
|
||||
case DTYPE_HID:
|
||||
Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor.GenericHID);
|
||||
Size = sizeof(USB_Descriptor_HID_t);
|
||||
break;
|
||||
case DTYPE_Report:
|
||||
Address = DESCRIPTOR_ADDRESS(GenericReport);
|
||||
Size = sizeof(GenericReport);
|
||||
break;
|
||||
}
|
||||
|
||||
*DescriptorAddress = Address;
|
||||
return Size;
|
||||
}
|
||||
|
|
@ -0,0 +1,100 @@
|
|||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2009.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.fourwalledcubicle.com
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, and distribute this software
|
||||
and its documentation for any purpose and without fee is hereby
|
||||
granted, provided that the above copyright notice appear in all
|
||||
copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
*
|
||||
* Header file for Descriptors.c.
|
||||
*/
|
||||
|
||||
#ifndef _DESCRIPTORS_H_
|
||||
#define _DESCRIPTORS_H_
|
||||
|
||||
/* Includes: */
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
/* Type Defines: */
|
||||
/** Type define for the HID class specific HID descriptor, to describe the HID device's specifications. Refer to the HID
|
||||
* specification for details on the structure elements.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
USB_Descriptor_Header_t Header;
|
||||
|
||||
uint16_t HIDSpec;
|
||||
uint8_t CountryCode;
|
||||
|
||||
uint8_t TotalHIDReports;
|
||||
|
||||
uint8_t HIDReportType;
|
||||
uint16_t HIDReportLength;
|
||||
} USB_Descriptor_HID_t;
|
||||
|
||||
/** Type define for the data type used to store HID report descriptor elements. */
|
||||
typedef uint8_t USB_Descriptor_HIDReport_Datatype_t;
|
||||
|
||||
/** Type define for the device configuration descriptor structure. This must be defined in the
|
||||
* application code, as the configuration descriptor contains several sub-descriptors which
|
||||
* vary between devices, and which describe the device's usage to the host.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
USB_Descriptor_Configuration_Header_t Config;
|
||||
USB_Descriptor_Interface_t Interface;
|
||||
USB_Descriptor_HID_t GenericHID;
|
||||
USB_Descriptor_Endpoint_t GenericINEndpoint;
|
||||
USB_Descriptor_Endpoint_t GenericOUTEndpoint;
|
||||
} USB_Descriptor_Configuration_t;
|
||||
|
||||
/* Macros: */
|
||||
/** Endpoint number of the Generic HID reporting IN endpoint. */
|
||||
#define GENERIC_IN_EPNUM 1
|
||||
|
||||
/** Endpoint number of the Generic HID reporting OUT endpoint. */
|
||||
#define GENERIC_OUT_EPNUM 2
|
||||
|
||||
/** Size in bytes of the Generic HID reporting endpoint. */
|
||||
#define GENERIC_EPSIZE 8
|
||||
|
||||
/** Size in bytes of the Generic HID reports (including report ID byte). */
|
||||
#define GENERIC_REPORT_SIZE 8
|
||||
|
||||
/** Descriptor header type value, to indicate a HID class HID descriptor. */
|
||||
#define DTYPE_HID 0x21
|
||||
|
||||
/** Descriptor header type value, to indicate a HID class HID report descriptor. */
|
||||
#define DTYPE_Report 0x22
|
||||
|
||||
/* Function Prototypes: */
|
||||
uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
|
||||
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
|
||||
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1 @@
|
|||
<AVRStudio><MANAGEMENT><ProjectName>GenericHID</ProjectName><Created>29-Mar-2009 23:19:24</Created><LastEdit>29-Mar-2009 23:19:40</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>29-Mar-2009 23:19:24</Created><Version>4</Version><Build>4, 16, 0, 626</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile></ObjectFile><EntryFile></EntryFile><SaveFolder>C:\Users\Dean\Documents\Electronics\Projects\WORK\LUFAWORK\Demos\Device\GenericHID\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET>JTAGICE mkII</CURRENT_TARGET><CURRENT_PART>AT90USB1287.xml</CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM>Auto</COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>Descriptors.c</SOURCEFILE><SOURCEFILE>GenericHID.c</SOURCEFILE><HEADERFILE>Descriptors.h</HEADERFILE><HEADERFILE>GenericHID.h</HEADERFILE><OTHERFILE>makefile</OTHERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>at90usb1287</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>GenericHID.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20090313\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20090313\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>
|
||||
|
|
@ -0,0 +1,315 @@
|
|||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2009.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.fourwalledcubicle.com
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, and distribute this software
|
||||
and its documentation for any purpose and without fee is hereby
|
||||
granted, provided that the above copyright notice appear in all
|
||||
copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
*
|
||||
* Main source file for the GenericHID demo. This file contains the main tasks of the demo and
|
||||
* is responsible for the initial application hardware configuration.
|
||||
*/
|
||||
|
||||
#include "GenericHID.h"
|
||||
|
||||
/* Project Tags, for reading out using the ButtLoad project */
|
||||
BUTTLOADTAG(ProjName, "LUFA GenHID App");
|
||||
BUTTLOADTAG(BuildTime, __TIME__);
|
||||
BUTTLOADTAG(BuildDate, __DATE__);
|
||||
BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);
|
||||
|
||||
/** Static buffer to hold the last received report from the host, so that it can be echoed back in the next sent report */
|
||||
static uint8_t LastReceived[GENERIC_REPORT_SIZE];
|
||||
|
||||
|
||||
/** Main program entry point. This routine configures the hardware required by the application, then
|
||||
* starts the scheduler to run the USB management task.
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
|
||||
/* Indicate USB not ready */
|
||||
UpdateStatus(Status_USBNotReady);
|
||||
|
||||
/* Initialize USB Subsystem */
|
||||
USB_Init();
|
||||
|
||||
/* >> APPLICATION INIT CODE HERE << */
|
||||
for (;;);
|
||||
}
|
||||
|
||||
/** Event handler for the USB_Reset event. This fires when the USB interface is reset by the USB host, before the
|
||||
* enumeration process begins, and enables the control endpoint interrupt so that control requests can be handled
|
||||
* asynchronously when they arrive rather than when the control endpoint is polled manually.
|
||||
*/
|
||||
EVENT_HANDLER(USB_Reset)
|
||||
{
|
||||
/* Select the control endpoint */
|
||||
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
|
||||
|
||||
/* Enable the endpoint SETUP interrupt ISR for the control endpoint */
|
||||
USB_INT_Enable(ENDPOINT_INT_SETUP);
|
||||
}
|
||||
|
||||
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
|
||||
* starts the library USB task to begin the enumeration and USB management process.
|
||||
*/
|
||||
EVENT_HANDLER(USB_Connect)
|
||||
{
|
||||
/* Indicate USB enumerating */
|
||||
UpdateStatus(Status_USBEnumerating);
|
||||
}
|
||||
|
||||
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
|
||||
* the status LEDs and stops the USB management task.
|
||||
*/
|
||||
EVENT_HANDLER(USB_Disconnect)
|
||||
{
|
||||
/* Indicate USB not ready */
|
||||
UpdateStatus(Status_USBNotReady);
|
||||
}
|
||||
|
||||
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
|
||||
* of the USB device after enumeration, and configures the generic HID device endpoints.
|
||||
*/
|
||||
EVENT_HANDLER(USB_ConfigurationChanged)
|
||||
{
|
||||
/* Setup Generic IN Report Endpoint */
|
||||
Endpoint_ConfigureEndpoint(GENERIC_IN_EPNUM, EP_TYPE_INTERRUPT,
|
||||
ENDPOINT_DIR_IN, GENERIC_EPSIZE,
|
||||
ENDPOINT_BANK_SINGLE);
|
||||
|
||||
/* Enable the endpoint IN interrupt ISR for the report endpoint */
|
||||
USB_INT_Enable(ENDPOINT_INT_IN);
|
||||
|
||||
/* Setup Generic OUT Report Endpoint */
|
||||
Endpoint_ConfigureEndpoint(GENERIC_OUT_EPNUM, EP_TYPE_INTERRUPT,
|
||||
ENDPOINT_DIR_OUT, GENERIC_EPSIZE,
|
||||
ENDPOINT_BANK_SINGLE);
|
||||
|
||||
/* Enable the endpoint OUT interrupt ISR for the report endpoint */
|
||||
USB_INT_Enable(ENDPOINT_INT_OUT);
|
||||
|
||||
/* Indicate USB connected and ready */
|
||||
UpdateStatus(Status_USBReady);
|
||||
}
|
||||
|
||||
/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
|
||||
* control requests that are not handled internally by the USB library (including the HID commands, which are
|
||||
* all issued via the control endpoint), so that they can be handled appropriately for the application.
|
||||
*/
|
||||
EVENT_HANDLER(USB_UnhandledControlPacket)
|
||||
{
|
||||
/* Handle HID Class specific requests */
|
||||
switch (bRequest)
|
||||
{
|
||||
case REQ_GetReport:
|
||||
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSetupReceived();
|
||||
|
||||
uint8_t GenericData[GENERIC_REPORT_SIZE];
|
||||
|
||||
CreateGenericHIDReport(GenericData);
|
||||
|
||||
/* Write the report data to the control endpoint */
|
||||
Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData));
|
||||
|
||||
/* Finalize the stream transfer to send the last packet or clear the host abort */
|
||||
Endpoint_ClearSetupOUT();
|
||||
}
|
||||
|
||||
break;
|
||||
case REQ_SetReport:
|
||||
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSetupReceived();
|
||||
|
||||
/* Wait until the generic report has been sent by the host */
|
||||
while (!(Endpoint_IsSetupOUTReceived()));
|
||||
|
||||
uint8_t GenericData[GENERIC_REPORT_SIZE];
|
||||
|
||||
Endpoint_Read_Control_Stream(&GenericData, sizeof(GenericData));
|
||||
|
||||
ProcessGenericHIDReport(GenericData);
|
||||
|
||||
/* Clear the endpoint data */
|
||||
Endpoint_ClearSetupOUT();
|
||||
|
||||
/* Wait until the host is ready to receive the request confirmation */
|
||||
while (!(Endpoint_IsSetupINReady()));
|
||||
|
||||
/* Handshake the request by sending an empty IN packet */
|
||||
Endpoint_ClearSetupIN();
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
|
||||
* log to a serial port, or anything else that is suitable for status updates.
|
||||
*
|
||||
* \param CurrentStatus Current status of the system, from the GenericHID_StatusCodes_t enum
|
||||
*/
|
||||
void UpdateStatus(uint8_t CurrentStatus)
|
||||
{
|
||||
uint8_t LEDMask = LEDS_NO_LEDS;
|
||||
|
||||
/* Set the LED mask to the appropriate LED mask based on the given status code */
|
||||
switch (CurrentStatus)
|
||||
{
|
||||
case Status_USBNotReady:
|
||||
LEDMask = (LEDS_LED1);
|
||||
break;
|
||||
case Status_USBEnumerating:
|
||||
LEDMask = (LEDS_LED1 | LEDS_LED2);
|
||||
break;
|
||||
case Status_USBReady:
|
||||
LEDMask = (LEDS_LED2 | LEDS_LED4);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Set the board LEDs to the new LED mask */
|
||||
LEDs_SetAllLEDs(LEDMask);
|
||||
}
|
||||
|
||||
/** Function to process the lest received report from the host.
|
||||
*
|
||||
* \param DataArray Pointer to a buffer where the last report data is stored
|
||||
*/
|
||||
void ProcessGenericHIDReport(uint8_t* DataArray)
|
||||
{
|
||||
/*
|
||||
This is where you need to process the reports being sent from the host to the device.
|
||||
DataArray is an array holding the last report from the host. This function is called
|
||||
each time the host has sent a report to the device.
|
||||
*/
|
||||
|
||||
for (uint8_t i = 0; i < GENERIC_REPORT_SIZE; i++)
|
||||
LastReceived[i] = DataArray[i];
|
||||
}
|
||||
|
||||
/** Function to create the next report to send back to the host at the next reporting interval.
|
||||
*
|
||||
* \param DataArray Pointer to a buffer where the next report data should be stored
|
||||
*/
|
||||
void CreateGenericHIDReport(uint8_t* DataArray)
|
||||
{
|
||||
/*
|
||||
This is where you need to create reports to be sent to the host from the device. This
|
||||
function is called each time the host is ready to accept a new report. DataArray is
|
||||
an array to hold the report to the host.
|
||||
*/
|
||||
|
||||
for (uint8_t i = 0; i < GENERIC_REPORT_SIZE; i++)
|
||||
DataArray[i] = LastReceived[i];
|
||||
}
|
||||
|
||||
/** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as
|
||||
* a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send
|
||||
* HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB
|
||||
* controller.
|
||||
*/
|
||||
ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
|
||||
{
|
||||
/* Save previously selected endpoint before selecting a new endpoint */
|
||||
uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
|
||||
|
||||
/* Check if the control endpoint has received a request */
|
||||
if (Endpoint_HasEndpointInterrupted(ENDPOINT_CONTROLEP))
|
||||
{
|
||||
/* Clear the endpoint interrupt */
|
||||
Endpoint_ClearEndpointInterrupt(ENDPOINT_CONTROLEP);
|
||||
|
||||
/* Process the control request */
|
||||
USB_USBTask();
|
||||
|
||||
/* Handshake the endpoint setup interrupt - must be after the call to USB_USBTask() */
|
||||
USB_INT_Clear(ENDPOINT_INT_SETUP);
|
||||
}
|
||||
|
||||
/* Check if Generic IN endpoint has interrupted */
|
||||
if (Endpoint_HasEndpointInterrupted(GENERIC_IN_EPNUM))
|
||||
{
|
||||
/* Select the Generic IN Report Endpoint */
|
||||
Endpoint_SelectEndpoint(GENERIC_IN_EPNUM);
|
||||
|
||||
/* Clear the endpoint IN interrupt flag */
|
||||
USB_INT_Clear(ENDPOINT_INT_IN);
|
||||
|
||||
/* Clear the Generic IN Report endpoint interrupt and select the endpoint */
|
||||
Endpoint_ClearEndpointInterrupt(GENERIC_IN_EPNUM);
|
||||
|
||||
/* Create a tempoary buffer to hold the report to send to the host */
|
||||
uint8_t GenericData[GENERIC_REPORT_SIZE];
|
||||
|
||||
/* Create Generic Report Data */
|
||||
CreateGenericHIDReport(GenericData);
|
||||
|
||||
/* Write Generic Report Data */
|
||||
Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData));
|
||||
|
||||
/* Finalize the stream transfer to send the last packet */
|
||||
Endpoint_ClearCurrentBank();
|
||||
}
|
||||
|
||||
/* Check if Generic OUT endpoint has interrupted */
|
||||
if (Endpoint_HasEndpointInterrupted(GENERIC_OUT_EPNUM))
|
||||
{
|
||||
/* Select the Generic OUT Report Endpoint */
|
||||
Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM);
|
||||
|
||||
/* Clear the endpoint OUT Interrupt flag */
|
||||
USB_INT_Clear(ENDPOINT_INT_OUT);
|
||||
|
||||
/* Clear the Generic OUT Report endpoint interrupt and select the endpoint */
|
||||
Endpoint_ClearEndpointInterrupt(GENERIC_OUT_EPNUM);
|
||||
|
||||
/* Create a tempoary buffer to hold the read in report from the host */
|
||||
uint8_t GenericData[GENERIC_REPORT_SIZE];
|
||||
|
||||
/* Read Generic Report Data */
|
||||
Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData));
|
||||
|
||||
/* Process Generic Report Data */
|
||||
ProcessGenericHIDReport(GenericData);
|
||||
|
||||
/* Finalize the stream transfer to send the last packet */
|
||||
Endpoint_ClearCurrentBank();
|
||||
}
|
||||
|
||||
/* Restore previously selected endpoint */
|
||||
Endpoint_SelectEndpoint(PrevSelectedEndpoint);
|
||||
}
|
||||
|
|
@ -0,0 +1,88 @@
|
|||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2009.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.fourwalledcubicle.com
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, and distribute this software
|
||||
and its documentation for any purpose and without fee is hereby
|
||||
granted, provided that the above copyright notice appear in all
|
||||
copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
*
|
||||
* Header file for GenericHID.c.
|
||||
*/
|
||||
|
||||
#ifndef _GENERICHID_H_
|
||||
#define _GENERICHID_H_
|
||||
|
||||
/* Includes: */
|
||||
#include <avr/io.h>
|
||||
#include <avr/wdt.h>
|
||||
#include <avr/power.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
|
||||
#include "Descriptors.h"
|
||||
|
||||
#include <LUFA/Version.h> // Library Version Information
|
||||
#include <LUFA/Common/ButtLoadTag.h> // PROGMEM tags readable by the ButtLoad project
|
||||
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
|
||||
#include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
|
||||
|
||||
/* Macros: */
|
||||
/** HID Class specific request to get the next HID report from the device. */
|
||||
#define REQ_GetReport 0x01
|
||||
|
||||
/** HID Class specific request to send the next HID report to the device. */
|
||||
#define REQ_SetReport 0x09
|
||||
|
||||
/* Enums: */
|
||||
/** Enum for the possible status codes for passing to the UpdateStatus() function. */
|
||||
enum GenericHID_StatusCodes_t
|
||||
{
|
||||
Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB host) */
|
||||
Status_USBEnumerating = 1, /**< USB interface is enumerating */
|
||||
Status_USBReady = 2, /**< USB interface is connected and ready */
|
||||
};
|
||||
|
||||
/* Event Handlers: */
|
||||
/** Indicates that this module will catch the USB_Reset event when thrown by the library. */
|
||||
HANDLES_EVENT(USB_Reset);
|
||||
|
||||
/** Indicates that this module will catch the USB_Connect event when thrown by the library. */
|
||||
HANDLES_EVENT(USB_Connect);
|
||||
|
||||
/** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
|
||||
HANDLES_EVENT(USB_Disconnect);
|
||||
|
||||
/** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
|
||||
HANDLES_EVENT(USB_ConfigurationChanged);
|
||||
|
||||
/* Function Prototypes: */
|
||||
void UpdateStatus(uint8_t CurrentStatus);
|
||||
void ProcessGenericHIDReport(uint8_t* DataArray);
|
||||
void CreateGenericHIDReport(uint8_t* DataArray);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \mainpage Generic HID Device
|
||||
*
|
||||
* \section SSec_Info USB Information:
|
||||
*
|
||||
* The following table gives a rundown of the USB utilization of this demo.
|
||||
*
|
||||
* <table>
|
||||
* <tr>
|
||||
* <td><b>USB Mode:</b></td>
|
||||
* <td>Device</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>USB Class:</b></td>
|
||||
* <td>Human Interface Device (HID)</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>USB Subclass:</b></td>
|
||||
* <td>N/A</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>Relevant Standards:</b></td>
|
||||
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>Usable Speeds:</b></td>
|
||||
* <td>Low Speed Mode, Full Speed Mode</td>
|
||||
* </tr>
|
||||
* </table>
|
||||
*
|
||||
* \section SSec_Description Project Description:
|
||||
*
|
||||
* Generic HID device demonstration application. This gives a simple reference application
|
||||
* for implementing a generic HID device, using the basic USB HID drivers in all modern
|
||||
* OSes (i.e. no special drivers required). It accepts and sends up to 255 byte reports to
|
||||
* and from a USB Host, and by default transmits the last sent report back to the host.
|
||||
*
|
||||
* On startup the system will automatically enumerate and function as a vendor HID device.
|
||||
* When controlled by a custom HID class application, reports can be sent and received by
|
||||
* both the standard data endpoint and control request methods defined in the HID specification.
|
||||
*
|
||||
* \section SSec_Options Project Options
|
||||
*
|
||||
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
|
||||
*
|
||||
* <table>
|
||||
* <tr>
|
||||
* <td><b>Define Name:</b></td>
|
||||
* <td><b>Location:</b></td>
|
||||
* <td><b>Description:</b></td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>GENERIC_REPORT_SIZE</td>
|
||||
* <td>Descriptors.h</td>
|
||||
* <td>This token defines the size of the device reports, both sent and received. The value must be an
|
||||
* integer ranging from 1 to 255.</td>
|
||||
* </tr>
|
||||
* </table>
|
||||
*/
|
||||
|
|
@ -0,0 +1,728 @@
|
|||
# Hey Emacs, this is a -*- makefile -*-
|
||||
#----------------------------------------------------------------------------
|
||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
|
||||
# >> Modified for use with the LUFA project. <<
|
||||
#
|
||||
# Released to the Public Domain
|
||||
#
|
||||
# Additional material for this makefile was written by:
|
||||
# Peter Fleury
|
||||
# Tim Henigan
|
||||
# Colin O'Flynn
|
||||
# Reiner Patommel
|
||||
# Markus Pfaff
|
||||
# Sander Pool
|
||||
# Frederik Rouleau
|
||||
# Carlos Lamas
|
||||
# Dean Camera
|
||||
# Opendous Inc.
|
||||
# Denver Gingerich
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device, using avrdude.
|
||||
# Please customize the avrdude settings below first!
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make doxygen = Generate DoxyGen documentation for the project (must have
|
||||
# DoxyGen installed)
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = at90usb1287
|
||||
|
||||
|
||||
# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
|
||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
|
||||
# "Board" inside the application directory.
|
||||
BOARD = USBKEY
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
# Typical values are:
|
||||
# F_CPU = 1000000
|
||||
# F_CPU = 1843200
|
||||
# F_CPU = 2000000
|
||||
# F_CPU = 3686400
|
||||
# F_CPU = 4000000
|
||||
# F_CPU = 7372800
|
||||
# F_CPU = 8000000
|
||||
# F_CPU = 11059200
|
||||
# F_CPU = 14745600
|
||||
# F_CPU = 16000000
|
||||
# F_CPU = 18432000
|
||||
# F_CPU = 20000000
|
||||
F_CPU = 8000000
|
||||
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_CLOCK, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed). This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_CLOCK = 8000000
|
||||
|
||||
|
||||
# Output format. (can be srec, ihex, binary)
|
||||
FORMAT = ihex
|
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = GenericHID
|
||||
|
||||
|
||||
# Object files directory
|
||||
# To put object files in current directory, use a dot (.), do NOT make
|
||||
# this an empty or blank macro!
|
||||
OBJDIR = .
|
||||
|
||||
|
||||
# Path to the LUFA library
|
||||
LUFA_PATH = ../../..
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC = $(TARGET).c \
|
||||
Descriptors.c \
|
||||
$(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
|
||||
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/StdDescriptors.c \
|
||||
|
||||
|
||||
# List C++ source files here. (C dependencies are automatically generated.)
|
||||
CPPSRC =
|
||||
|
||||
|
||||
# List Assembler source files here.
|
||||
# Make them always end in a capital .S. Files ending in a lowercase .s
|
||||
# will not be considered source files but generated files (assembler
|
||||
# output from the compiler), and will be deleted upon "make clean"!
|
||||
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
||||
# it will preserve the spelling of the filenames, and gcc itself does
|
||||
# care about how the name is spelled on its command-line.
|
||||
ASRC =
|
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
OPT = s
|
||||
|
||||
|
||||
# Debugging format.
|
||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
||||
# AVR Studio 4.10 requires dwarf-2.
|
||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
||||
DEBUG = dwarf-2
|
||||
|
||||
|
||||
# List any extra directories to look for include files here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRAINCDIRS = $(LUFA_PATH)/
|
||||
|
||||
|
||||
# Compiler flag to set the C Standard level.
|
||||
# c89 = "ANSI" C
|
||||
# gnu89 = c89 plus GCC extensions
|
||||
# c99 = ISO C99 standard (not yet fully implemented)
|
||||
# gnu99 = c99 plus GCC extensions
|
||||
CSTANDARD = -std=gnu99
|
||||
|
||||
|
||||
# Place -D or -U options here for C sources
|
||||
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
|
||||
CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS -DUSB_DEVICE_ONLY
|
||||
CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
|
||||
|
||||
# Place -D or -U options here for ASM sources
|
||||
ADEFS = -DF_CPU=$(F_CPU)
|
||||
|
||||
|
||||
# Place -D or -U options here for C++ sources
|
||||
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
||||
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
||||
|
||||
|
||||
|
||||
#---------------- Compiler Options C ----------------
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CFLAGS = -g$(DEBUG)
|
||||
CFLAGS += $(CDEFS)
|
||||
CFLAGS += -O$(OPT)
|
||||
CFLAGS += -funsigned-char
|
||||
CFLAGS += -funsigned-bitfields
|
||||
CFLAGS += -ffunction-sections
|
||||
CFLAGS += -fpack-struct
|
||||
CFLAGS += -fshort-enums
|
||||
CFLAGS += -finline-limit=20
|
||||
CFLAGS += -Wall
|
||||
CFLAGS += -Wstrict-prototypes
|
||||
CFLAGS += -Wundef
|
||||
#CFLAGS += -fno-unit-at-a-time
|
||||
#CFLAGS += -Wunreachable-code
|
||||
#CFLAGS += -Wsign-compare
|
||||
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
|
||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
CFLAGS += $(CSTANDARD)
|
||||
|
||||
|
||||
#---------------- Compiler Options C++ ----------------
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CPPFLAGS = -g$(DEBUG)
|
||||
CPPFLAGS += $(CPPDEFS)
|
||||
CPPFLAGS += -O$(OPT)
|
||||
CPPFLAGS += -funsigned-char
|
||||
CPPFLAGS += -funsigned-bitfields
|
||||
CPPFLAGS += -fpack-struct
|
||||
CPPFLAGS += -fshort-enums
|
||||
CPPFLAGS += -fno-exceptions
|
||||
CPPFLAGS += -Wall
|
||||
CFLAGS += -Wundef
|
||||
#CPPFLAGS += -mshort-calls
|
||||
#CPPFLAGS += -fno-unit-at-a-time
|
||||
#CPPFLAGS += -Wstrict-prototypes
|
||||
#CPPFLAGS += -Wunreachable-code
|
||||
#CPPFLAGS += -Wsign-compare
|
||||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
#CPPFLAGS += $(CSTANDARD)
|
||||
|
||||
|
||||
#---------------- Assembler Options ----------------
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns: create listing
|
||||
# -gstabs: have the assembler create line number information; note that
|
||||
# for use in COFF files, additional information about filenames
|
||||
# and function names needs to be present in the assembler source
|
||||
# files -- see avr-libc docs [FIXME: not yet described there]
|
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# dump that will be displayed for a given single line of source input.
|
||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
|
||||
|
||||
|
||||
#---------------- Library Options ----------------
|
||||
# Minimalistic printf version
|
||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
||||
|
||||
# Floating point printf version (requires MATH_LIB = -lm below)
|
||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard printf version.
|
||||
PRINTF_LIB =
|
||||
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
||||
|
||||
|
||||
# Minimalistic scanf version
|
||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
||||
|
||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard scanf version.
|
||||
SCANF_LIB =
|
||||
#SCANF_LIB = $(SCANF_LIB_MIN)
|
||||
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
||||
|
||||
|
||||
MATH_LIB = -lm
|
||||
|
||||
|
||||
# List any extra directories to look for libraries here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRALIBDIRS =
|
||||
|
||||
|
||||
|
||||
#---------------- External Memory Options ----------------
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# used for variables (.data/.bss) and heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# only used for heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
EXTMEMOPTS =
|
||||
|
||||
|
||||
|
||||
#---------------- Linker Options ----------------
|
||||
# -Wl,...: tell GCC to pass this to linker.
|
||||
# -Map: create map file
|
||||
# --cref: add cross reference to map file
|
||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
||||
LDFLAGS += -Wl,--relax
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
LDFLAGS += $(EXTMEMOPTS)
|
||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
||||
#LDFLAGS += -T linker_script.x
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options (avrdude) ----------------
|
||||
|
||||
# Programming hardware: alf avr910 avrisp bascom bsd
|
||||
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
|
||||
#
|
||||
# Type: avrdude -c ?
|
||||
# to get a full listing.
|
||||
#
|
||||
AVRDUDE_PROGRAMMER = jtagmkII
|
||||
|
||||
# com1 = serial port. Use lpt1 to connect to parallel port.
|
||||
AVRDUDE_PORT = usb
|
||||
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
|
||||
|
||||
# Uncomment the following if you want avrdude's erase cycle counter.
|
||||
# Note that this counter needs to be initialized first using -Yn,
|
||||
# see avrdude manual.
|
||||
#AVRDUDE_ERASE_COUNTER = -y
|
||||
|
||||
# Uncomment the following if you do /not/ wish a verification to be
|
||||
# performed after programming the device.
|
||||
#AVRDUDE_NO_VERIFY = -V
|
||||
|
||||
# Increase verbosity level. Please use this when submitting bug
|
||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
||||
# to submit bug reports.
|
||||
#AVRDUDE_VERBOSE = -v -v
|
||||
|
||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
||||
|
||||
|
||||
|
||||
#---------------- Debugging Options ----------------
|
||||
|
||||
# For simulavr only - target MCU frequency.
|
||||
DEBUG_MFREQ = $(F_CPU)
|
||||
|
||||
# Set the DEBUG_UI to either gdb or insight.
|
||||
# DEBUG_UI = gdb
|
||||
DEBUG_UI = insight
|
||||
|
||||
# Set the debugging back-end to either avarice, simulavr.
|
||||
DEBUG_BACKEND = avarice
|
||||
#DEBUG_BACKEND = simulavr
|
||||
|
||||
# GDB Init Filename.
|
||||
GDBINIT_FILE = __avr_gdbinit
|
||||
|
||||
# When using avarice settings for the JTAG
|
||||
JTAG_DEV = /dev/com1
|
||||
|
||||
# Debugging port used to communicate between GDB / avarice / simulavr.
|
||||
DEBUG_PORT = 4242
|
||||
|
||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
||||
# just set to localhost unless doing some sort of crazy debugging when
|
||||
# avarice is running on a different computer.
|
||||
DEBUG_HOST = localhost
|
||||
|
||||
|
||||
|
||||
#============================================================================
|
||||
|
||||
|
||||
# Define programs and commands.
|
||||
SHELL = sh
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
AR = avr-ar rcs
|
||||
NM = avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
REMOVEDIR = rm -rf
|
||||
COPY = cp
|
||||
WINSHELL = cmd
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_BEGIN = -------- begin --------
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after:
|
||||
MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
MSG_FLASH = Creating load file for Flash:
|
||||
MSG_EEPROM = Creating load file for EEPROM:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = Linking:
|
||||
MSG_COMPILING = Compiling C:
|
||||
MSG_COMPILING_CPP = Compiling C++:
|
||||
MSG_ASSEMBLING = Assembling:
|
||||
MSG_CLEANING = Cleaning project:
|
||||
MSG_CREATING_LIBRARY = Creating library:
|
||||
|
||||
|
||||
|
||||
|
||||
# Define all object files.
|
||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
||||
|
||||
|
||||
# Compiler flags to generate dependency files.
|
||||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
||||
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# Default target.
|
||||
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
|
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
build: elf hex eep lss sym
|
||||
#build: lib
|
||||
|
||||
|
||||
elf: $(TARGET).elf
|
||||
hex: $(TARGET).hex
|
||||
eep: $(TARGET).eep
|
||||
lss: $(TARGET).lss
|
||||
sym: $(TARGET).sym
|
||||
LIBNAME=lib$(TARGET).a
|
||||
lib: $(LIBNAME)
|
||||
|
||||
|
||||
|
||||
# Eye candy.
|
||||
# AVR Studio 3.x does not check make's exit code but relies on
|
||||
# the following magic strings to be generated by the compile job.
|
||||
begin:
|
||||
@echo
|
||||
@echo $(MSG_BEGIN)
|
||||
|
||||
end:
|
||||
@echo $(MSG_END)
|
||||
@echo
|
||||
|
||||
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
|
||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
|
||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
|
||||
|
||||
sizebefore:
|
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
||||
2>/dev/null; echo; fi
|
||||
|
||||
sizeafter:
|
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
||||
2>/dev/null; echo; fi
|
||||
|
||||
checkhooks: build
|
||||
@echo
|
||||
@echo ------- Unhooked LUFA Events -------
|
||||
@$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
|
||||
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
|
||||
echo "(None)"
|
||||
@echo ------------------------------------
|
||||
|
||||
checklibmode:
|
||||
@echo
|
||||
@echo ----------- Library Mode -----------
|
||||
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
|
||||
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|
||||
|| echo "No specific mode (both device and host mode allowable)."
|
||||
@echo ------------------------------------
|
||||
|
||||
checkboard:
|
||||
@echo
|
||||
@echo ---------- Selected Board ----------
|
||||
@echo Selected board model is $(BOARD).
|
||||
@echo ------------------------------------
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion :
|
||||
@$(CC) --version
|
||||
|
||||
|
||||
|
||||
# Program the device.
|
||||
program: $(TARGET).hex $(TARGET).eep
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
|
||||
flip: $(TARGET).hex
|
||||
batchisp -hardware usb -device $(MCU) -operation erase f
|
||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
|
||||
dfu: $(TARGET).hex
|
||||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
flip-ee: $(TARGET).hex $(TARGET).eep
|
||||
copy $(TARGET).eep $(TARGET)eep.hex
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
|
||||
dfu-ee: $(TARGET).hex $(TARGET).eep
|
||||
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
|
||||
# Generate avr-gdb config/init file which does the following:
|
||||
# define the reset signal, load the target file, connect to target, and set
|
||||
# a breakpoint at main().
|
||||
gdb-config:
|
||||
@$(REMOVE) $(GDBINIT_FILE)
|
||||
@echo define reset >> $(GDBINIT_FILE)
|
||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
||||
@echo end >> $(GDBINIT_FILE)
|
||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
||||
ifeq ($(DEBUG_BACKEND),simulavr)
|
||||
@echo load >> $(GDBINIT_FILE)
|
||||
endif
|
||||
@echo break main >> $(GDBINIT_FILE)
|
||||
|
||||
debug: gdb-config $(TARGET).elf
|
||||
ifeq ($(DEBUG_BACKEND), avarice)
|
||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
||||
@$(WINSHELL) /c pause
|
||||
|
||||
else
|
||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
||||
endif
|
||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
||||
|
||||
|
||||
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
COFFCONVERT = $(OBJCOPY) --debugging
|
||||
COFFCONVERT += --change-section-address .data-0x800000
|
||||
COFFCONVERT += --change-section-address .bss-0x800000
|
||||
COFFCONVERT += --change-section-address .noinit-0x800000
|
||||
COFFCONVERT += --change-section-address .eeprom-0x810000
|
||||
|
||||
|
||||
|
||||
coff: $(TARGET).elf
|
||||
@echo
|
||||
@echo $(MSG_COFF) $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
||||
|
||||
|
||||
extcoff: $(TARGET).elf
|
||||
@echo
|
||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
||||
|
||||
|
||||
|
||||
# Create final output files (.hex, .eep) from ELF output file.
|
||||
%.hex: %.elf
|
||||
@echo
|
||||
@echo $(MSG_FLASH) $@
|
||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
|
||||
%.eep: %.elf
|
||||
@echo
|
||||
@echo $(MSG_EEPROM) $@
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
%.lss: %.elf
|
||||
@echo
|
||||
@echo $(MSG_EXTENDED_LISTING) $@
|
||||
$(OBJDUMP) -h -z -S $< > $@
|
||||
|
||||
# Create a symbol table from ELF output file.
|
||||
%.sym: %.elf
|
||||
@echo
|
||||
@echo $(MSG_SYMBOL_TABLE) $@
|
||||
$(NM) -n $< > $@
|
||||
|
||||
|
||||
|
||||
# Create library from object files.
|
||||
.SECONDARY : $(TARGET).a
|
||||
.PRECIOUS : $(OBJ)
|
||||
%.a: $(OBJ)
|
||||
@echo
|
||||
@echo $(MSG_CREATING_LIBRARY) $@
|
||||
$(AR) $@ $(OBJ)
|
||||
|
||||
|
||||
# Link: create ELF output file from object files.
|
||||
.SECONDARY : $(TARGET).elf
|
||||
.PRECIOUS : $(OBJ)
|
||||
%.elf: $(OBJ)
|
||||
@echo
|
||||
@echo $(MSG_LINKING) $@
|
||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
||||
|
||||
|
||||
# Compile: create object files from C source files.
|
||||
$(OBJDIR)/%.o : %.c
|
||||
@echo
|
||||
@echo $(MSG_COMPILING) $<
|
||||
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create object files from C++ source files.
|
||||
$(OBJDIR)/%.o : %.cpp
|
||||
@echo
|
||||
@echo $(MSG_COMPILING_CPP) $<
|
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
%.s : %.c
|
||||
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C++ source files.
|
||||
%.s : %.cpp
|
||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
$(OBJDIR)/%.o : %.S
|
||||
@echo
|
||||
@echo $(MSG_ASSEMBLING) $<
|
||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Create preprocessed source for use in sending a bug report.
|
||||
%.i : %.c
|
||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Target: clean project.
|
||||
clean: begin clean_list clean_binary end
|
||||
|
||||
clean_binary:
|
||||
$(REMOVE) $(TARGET).hex
|
||||
|
||||
clean_list:
|
||||
@echo $(MSG_CLEANING)
|
||||
$(REMOVE) $(TARGET).eep
|
||||
$(REMOVE) $(TARGET)eep.hex
|
||||
$(REMOVE) $(TARGET).cof
|
||||
$(REMOVE) $(TARGET).elf
|
||||
$(REMOVE) $(TARGET).map
|
||||
$(REMOVE) $(TARGET).sym
|
||||
$(REMOVE) $(TARGET).lss
|
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
|
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
|
||||
$(REMOVE) $(SRC:.c=.s)
|
||||
$(REMOVE) $(SRC:.c=.d)
|
||||
$(REMOVE) $(SRC:.c=.i)
|
||||
$(REMOVEDIR) .dep
|
||||
|
||||
|
||||
doxygen:
|
||||
@echo Generating Project Documentation...
|
||||
@doxygen Doxygen.conf
|
||||
@echo Documentation Generation Complete.
|
||||
|
||||
clean_doxygen:
|
||||
rm -rf Documentation
|
||||
|
||||
# Create object files directory
|
||||
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
||||
|
||||
|
||||
# Include the dependency files.
|
||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
||||
|
||||
|
||||
# Listing of phony targets.
|
||||
.PHONY : all checkhooks checklibmode checkboard \
|
||||
begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff clean \
|
||||
clean_list clean_binary program debug gdb-config \
|
||||
doxygen dfu flip flip-ee dfu-ee
|
||||
|
|
@ -31,7 +31,7 @@
|
|||
|
||||
/** \file
|
||||
*
|
||||
* Main source file for the KeyboardFullInt demo. This file contains the main tasks of the demo and
|
||||
* Main source file for the Keyboard demo. This file contains the main tasks of the demo and
|
||||
* is responsible for the initial application hardware configuration.
|
||||
*/
|
||||
|
||||
|
|
@ -448,7 +448,7 @@ static inline void ReceiveNextReport(void)
|
|||
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
|
||||
* log to a serial port, or anything else that is suitable for status updates.
|
||||
*
|
||||
* \param CurrentStatus Current status of the system, from the KeyboardFullInt_StatusCodes_t enum
|
||||
* \param CurrentStatus Current status of the system, from the Keyboard_StatusCodes_t enum
|
||||
*/
|
||||
void UpdateStatus(uint8_t CurrentStatus)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -26,6 +26,9 @@ all:
|
|||
make -C DualCDC clean
|
||||
make -C DualCDC all
|
||||
|
||||
make -C GenericHID clean
|
||||
make -C GenericHID all
|
||||
|
||||
make -C Joystick clean
|
||||
make -C Joystick all
|
||||
|
||||
|
|
@ -55,6 +58,7 @@ all:
|
|||
make -C AudioOutput $@
|
||||
make -C CDC $@
|
||||
make -C DualCDC $@
|
||||
make -C GenericHID $@
|
||||
make -C Joystick $@
|
||||
make -C Keyboard $@
|
||||
make -C KeyboardMouse $@
|
||||
|
|
|
|||
File diff suppressed because one or more lines are too long
|
|
@ -44,6 +44,8 @@
|
|||
* - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)
|
||||
* - Fixed USBTask.h not conditionally including HostChapter9.h only when CAN_BE_DEVICE is defined (thanks to Ian Gregg)
|
||||
* - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)
|
||||
* - Added new GenericHID device demo application
|
||||
*
|
||||
*
|
||||
* \section Sec_ChangeLog090209 Version 090209
|
||||
*
|
||||
|
|
@ -99,6 +101,7 @@
|
|||
* - Fixed CDC Host demo not searching through both CDC interfaces for endpoints
|
||||
* - Fixed incorrect Product String descriptor length in the DFU class bootloader
|
||||
*
|
||||
*
|
||||
* \section Sec_ChangeLog081224 Version 081224
|
||||
*
|
||||
* - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs
|
||||
|
|
@ -149,6 +152,7 @@
|
|||
* - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist)
|
||||
* rather than passing the size back to the caller through a parameter and returning a boolean
|
||||
*
|
||||
*
|
||||
* \section Sec_ChangeLog153 Version 1.5.3 - Released 2nd October, 2008
|
||||
*
|
||||
* - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately
|
||||
|
|
|
|||
|
|
@ -216,7 +216,7 @@
|
|||
* 0x204F
|
||||
* </td>
|
||||
* <td>
|
||||
* ** Not Currently Allocated **
|
||||
* Generic HID Demo Application
|
||||
* </td>
|
||||
* </tr>
|
||||
*
|
||||
|
|
|
|||
Loading…
Reference in New Issue