34dc7f241f
Make Low Level host demos use void pointers for the configuration descriptor, to prevent warnings when passed to the altered configuration descriptor parsing routines.
...
Added preprocessor checks to give a human readable error when the class drivers are used when the incompatible NO_STREAM_CALLBACKS compile time option is used.
2009-11-07 07:23:03 +00:00
8ba51f090f
Added new Printer Host mode Class driver.
...
Added new Printer Host mode ClassDriver demo.
Added table of supported classes and modes to the main USB Class Driver documentation.
2009-11-04 13:16:53 +00:00
ba8ffa4cb7
Add support for Mouse Scrollwheel to the MouseHostWithParser demos.
2009-11-04 05:18:43 +00:00
87b2572ae5
Added new JoystickHostWithParser demos to the library.
...
Add some missing documentation to some of the library demos.
2009-11-04 04:55:10 +00:00
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
2009-10-16 08:04:51 +00:00
dc68de15b6
Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.
...
Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
2009-10-12 05:59:55 +00:00
664a292181
Application documentation/comment cleanup.
2009-10-08 07:18:28 +00:00
bdedbd558c
Add new MIDIHost LowLevel demo application.
...
Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.
2009-10-08 07:00:44 +00:00
e57e08c672
Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a device ID (thanks to Andrei Krainev).
2009-09-28 15:56:27 +00:00
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
2009-09-09 13:17:04 +00:00
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
2009-09-06 05:58:40 +00:00
6783bc4594
Add StillImage Host Class Driver functions for opening and closing sessions. Ensure IsActive is set on the interface to allow device functions to run.
...
Fix spelling of "Received" in all source files where it is misspelt "Recieved".
2009-09-02 13:08:55 +00:00
ecf7c18cf2
Fixed error in PrinterHost preventing the full page data from being sent to the attached device.
2009-09-02 00:27:52 +00:00
f9f1bcc25c
Oops - with new changes to the way the device Configuration Descriptor is retrieved from the device, ensure that the correct position pointer is cast when extracting descriptor parameters.
2009-08-31 08:27:48 +00:00
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
2009-08-31 07:48:32 +00:00
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
2009-08-30 06:52:03 +00:00
c830fcb0e1
Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.
...
Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
2009-08-06 14:22:04 +00:00
4421782b7f
Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.
...
Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.
Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
2009-08-05 11:39:28 +00:00
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
2009-08-05 06:36:31 +00:00
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
2009-07-28 13:53:52 +00:00
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
2009-07-21 02:48:41 +00:00
18f7cd3325
Ensure control pipe is selected in the PrinterHost demo before trying to send control requests.
2009-07-20 14:12:05 +00:00
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
2009-07-20 14:07:02 +00:00
73a21890f6
Added missing DoxyGen configuration file to the PrinterHost demo.
2009-07-20 13:52:45 +00:00
8a28fd8e6c
Added extra DoxyGen documentation to the new PrinterHost demo.
2009-07-20 13:49:26 +00:00
3ee3ed2d6d
Add PrinterHost to the project file and Host LowLevel directory makefile.
2009-07-20 13:41:37 +00:00
2a90f66de2
Moved PrinterHost demo from Incomplete to LowLevel, as it is now near-complete.
2009-07-20 13:37:20 +00:00
Dean Camera