7aaced1e8b
Remove USB_MODE_* macros, replace with a semantically linked USB_Modes_t enum.
...
Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic.
Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run.
Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().
2010-10-12 12:22:11 +00:00
c1cfffd8eb
Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings.
2010-10-12 11:27:15 +00:00
292a631b62
Added new NO_SOF_EVENTS compile time option, enabled in the bootloaders to reduce the compiled binary size.
2010-10-07 11:55:20 +00:00
ccc82ce745
Added board hardware driver support for the Busware CUL V3 board.
...
Added SVN eol-style property to the library driver files that are missing it.
2010-10-06 12:40:20 +00:00
accadba2dd
Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called.
2010-10-06 11:51:53 +00:00
3ae9e6042f
Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.
2010-10-06 10:16:02 +00:00
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
2010-10-01 12:01:54 +00:00
d06febbb59
Fix device mode for the U4 parts.
2010-10-01 11:22:24 +00:00
383d167125
Whitespace corrections.
...
Make Printer Host mode Class driver interface descriptor search routine pre-cast the current interface descriptor to simplify the value checks.
2010-10-01 00:11:32 +00:00
a1e453e900
Make Host mode Class drivers only set the class driver instance's state values once a compatible interface has been found within the device.
2010-09-30 23:23:05 +00:00
86367574e6
Fix incorrectly named configuration descriptor callback routines in the host mode class drivers.
...
Fix typo in MIDI low level device demo.
2010-09-30 08:07:29 +00:00
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
2010-09-30 07:56:47 +00:00
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
2010-09-30 06:23:38 +00:00
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
2010-09-29 13:56:52 +00:00
c0e4f52e8f
Fix up incorrect version numbers in demo/project descriptors.
...
Add class name prefixes to missed constants in the class drivers to give all class driver elements a consistent namespace.
2010-09-28 14:59:16 +00:00
25d896a507
Added board hardware driver support for the Arduino Uno development board.
...
Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver.
2010-09-28 14:30:26 +00:00
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
2010-09-28 12:14:06 +00:00
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
2010-09-24 06:34:43 +00:00
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
2010-09-22 04:20:45 +00:00
c459ef6981
Oops - need to call USB_Attach() when reinitializing into USB Host mode, or no devices will be detected.
2010-09-21 14:06:39 +00:00
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
2010-09-21 10:48:38 +00:00
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
2010-09-19 08:42:30 +00:00
d66a925786
Make device mode configure the control endpoint even before the bus has been reset, so that the device will enumerate correctly on hosts that do not reset the device before initial use.
2010-09-19 06:30:14 +00:00
b17e87d140
More simplifications to USBController.c, fix errors and warnings when compiled for the series 2 USB AVRs.
2010-09-19 06:09:25 +00:00
1621158c62
Fix warning when not compiled for UID auto-selection mode.
2010-09-19 06:00:45 +00:00
e7e1c21bc5
Clean up USBController.c/.h to more clearly seperate out host and device setup and reset paths.
...
Make USBInterrupt.c process all pending USB host mode interrupts before resetting the bus, so that no interrupts are lost when in UID auto-selection mode.
2010-09-19 05:58:27 +00:00
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
2010-09-19 05:46:17 +00:00
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
2010-09-15 13:11:28 +00:00
0d57659fa6
Fix incorrect documentation on the Get Descriptor standard request.
2010-09-15 10:47:22 +00:00
e61345f872
Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2.
2010-09-14 11:19:44 +00:00
84696c727d
Added board hardware driver support for the BUI development board.
2010-09-14 11:11:54 +00:00
92059fcbf9
Added board hardware driver support for the UDIP development board.
2010-09-14 10:31:27 +00:00
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
2010-09-13 11:39:41 +00:00
6b59c9b834
Minor documentation phrasing changes.
2010-09-12 12:20:36 +00:00
12fb68ea1f
Added PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the Host mode Printer Class driver.
...
Modified PRNT_Host_USBTask() to flush the output pipe on each call.
2010-09-11 04:09:48 +00:00
4c49ee6885
Whitespace corrections.
2010-09-09 13:33:00 +00:00
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
2010-09-09 13:05:57 +00:00
66f14d44a3
Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev).
...
Simplify some of the LED driver functions to produce more compact code.
2010-09-09 09:57:03 +00:00
7aaf9b2036
Added new PRNT_Host_BytesReceived() and PRNT_Host_ReceiveByte() functions to the Print Host Class driver.
2010-09-07 03:38:11 +00:00
6e011f88d9
Must save and restore the endpoint/pipe interrupt enable flags during reconfiguration of all endpoints/pipes in the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() routines.
2010-09-07 03:07:40 +00:00
ebdb1b37ca
Fix bug in Pipe_ConfigurePipe() breaking already configured pipes that was accidentally clearing the pipe's IN mode.
2010-09-05 08:24:56 +00:00
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
2010-09-05 07:11:53 +00:00
0174d8ea70
Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode, as some devices will drop off the USB bus if no connection is made within a timeout period.
2010-09-04 10:17:09 +00:00
21954179a4
Added board hardware driver support for the USBFOO development board.
2010-09-04 09:41:08 +00:00
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
2010-09-03 09:57:31 +00:00
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
2010-08-31 12:33:21 +00:00
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
2010-08-31 07:32:48 +00:00
cd4c10fefa
Better documentation for the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() functions.
2010-08-24 13:57:55 +00:00
b7b8a9edfa
Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value.
2010-08-24 13:16:16 +00:00
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
2010-08-24 13:02:38 +00:00
Dean Camera