6005a42150
Add experimental support for the UC3A0, UC3A1 and UC3A3 series AVR32 microcontrollers.
2011-03-13 21:25:05 +00:00
13e2f71f15
Simplify AVR32 UC3B software FIFO, as it will only ever be accessed a byte at a time to prevent data alignment issues.
2011-03-11 07:03:34 +00:00
c8a438d66c
Add structure padding to the appropriate descriptor structures to maintain correct alignments on larger architectures.
...
Fix EVK1101 swapped joystick Right/Down masks.
2011-03-11 06:47:39 +00:00
e4b3e3fc65
Fix UC3B architecture compile errors and ensure the architecture can be compiled with no special makefile tokens defined.
2011-03-05 16:36:57 +00:00
8b13f7f89a
Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name.
...
Fix undefined error in Pipe_UC3B.h.
Add missing migration notes.
2011-03-05 16:30:57 +00:00
1e3d892b6a
Add software FIFOs to the UC3B pipe control interfaces, to match the endpoint control interfaces. Fix incorrect endianness for the Endpoint/Pipe read and write routines.
2011-03-05 12:13:35 +00:00
b763c3f33e
Porting updates for the UC3B architecture - get UC3B partially enumerating using a modified mouse demo on the EVK1101. Implement a software FIFO for the endpoint banks; datasheet hints that this can be done through hardware as on the AVR8 architecture, but the correct method to do this not discovered yet.
2011-03-05 11:34:04 +00:00
c1c94fe5a0
Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe) is found.
...
Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine.
2011-03-03 19:32:27 +00:00
8c6f26e19d
Add in USB_INT_RegisterHandlers() internal function to register the interrupt handler routines used by LUFA. Add dummy loads after clearing the interrupt lines according to the datasheet.
...
Add in temporary global interrupts enable/disable macros.
2011-02-28 22:30:40 +00:00
86a2be8536
Fix EVK1101 board joystick driver movement masks.
2011-02-27 23:05:46 +00:00
29ba88cffd
Add code to start the USBB Generic Clock from the user-specified master clock source (OSCx or PLLx) in the AVR32 UC3B core USB driver.
2011-02-27 22:06:31 +00:00
c79f6e2586
Oops - ensure that only the relevant/available interrupts are defined and used on each architecture.
...
Make all USB driver headers include USBMode.h first, to ensure that the relevant USB mode macros are defined.
2011-02-27 20:38:47 +00:00
04526d284d
Changed over the AVR8 USB controller interrupt management macros to be inlined functions instead, for better compile-time validity checking and to keep the per-architecture source files as uniform as possible.
2011-02-27 20:00:15 +00:00
92b3553a07
General cleanup and more port work to the AVR32 UC3B.
2011-02-27 18:25:29 +00:00
4a3b70e727
Fix USB Host mode compile errors for the UC3B architecture.
2011-02-27 15:23:09 +00:00
381dd0d490
Move out common architecture-independent core definitions into the appropriate core dispatch header files.
2011-02-27 14:39:49 +00:00
f3f481183a
More AVR32 UC3B architecture ports - USB device mode applications can now be sucessfully compiled, although they will be currently non-functional.
2011-02-27 14:04:29 +00:00
cf2411435c
Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called.
...
More UC3B architecture porting.
2011-02-26 20:22:33 +00:00
66c38cd940
Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).
2011-02-26 15:57:06 +00:00
6f01b6afd5
More UC3B architecture port updates.
2011-02-26 15:54:11 +00:00
a318f32b31
Update board driver common APIs to use uint_reg_t.
2011-02-20 19:18:06 +00:00
86be7f9330
Fix incorrect Doxygen grouping in the incomplete AVR32 UC3B architecture port.
2011-02-20 18:27:09 +00:00
3a00e41639
Make sure the peripheral driver .c files include the driver dispatch header, rather than the architecture specific header files.
2011-02-20 18:23:09 +00:00
b6a3c78fa3
Rename architecture specific driver files, to make them appear with uniquely identifying filenames in the documentation.
2011-02-20 18:21:04 +00:00
cad5e9ffca
Added start of a port of the core USB driver code to the AVR32 UC3B architecture.
2011-02-20 17:53:17 +00:00
f3ec62b5c6
More updates to remove architecture-specific comments from the documentation, alter USBMode.h preprocessor logic to support future architectures more easily.
2011-02-20 14:43:13 +00:00
28a1ee29a1
More Doxygen updates for multiple architecture support.
2011-02-20 14:07:20 +00:00
5e73190582
Start update of documentation to support possible multiple architectures in the future - alter \file documentation to automatically copy in the module documentation where possible.
2011-02-20 13:08:29 +00:00
1daa5e16f9
Initial restructuring of the core USB driver module to support multiple architectures in the future.
2011-02-19 22:59:27 +00:00
3832182fe1
Fix documentation glitches from the restructuring changes.
2011-02-19 18:53:30 +00:00
e0a3f26978
Move out Dataflash IC command constants headers into the general LUFA/Drivers/Misc/ directory rather than duplicating them inside the individual board driver folders.
2011-02-19 18:45:50 +00:00
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
2011-02-19 18:37:22 +00:00
100a197d0e
Reduced latency for executing the Start-Of-Frame events (if enabled in the user application).
2011-02-19 12:09:55 +00:00
4344b0621d
Added board driver support for the Sparkfun ATMEGA8U2 breakout board.
2011-02-16 21:00:46 +00:00
0019fbd129
Add more const-ness to the stream endpoint/pipe functions where possible.
2011-02-13 21:27:24 +00:00
272d446d32
Fix include path in the library RingBuffer.h header file.
2011-02-12 00:08:05 +00:00
782614dbb5
Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.
...
Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.
2011-02-10 17:55:49 +00:00
73718d7c57
Fixed incorect BUTTONS_BUTTON1 definition for the Minimus board.
2011-02-02 15:31:45 +00:00
43b9d552bb
Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable().
2011-01-30 23:12:06 +00:00
43c4735305
Renamed the PRNT_Host_SendString(), CDC_Host_SendString() and CDC_Device_SendString() functions to *_SendData(), and added new versions of the *_SendString() routines that expect a null terminated string instead.
...
Added new Serial_SendData() function to the Serial driver.
2011-01-30 21:02:31 +00:00
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
2011-01-30 19:47:31 +00:00
30f6d2bfd8
Oops - forgot to add in LOGICAL MINIMUM and LOGICAL MAXIMUM report items into the standard library Joystick HID report descriptor macro. Add in support for joystick resolution reporting via PHYSICAL_MINIMUM and PHYSICAL_MAXIMUM items.
2011-01-30 14:40:24 +00:00
e6dc951630
Add new HID_DESCRIPTOR_VENDOR() macro, change over all projects and Device ClassDriver demos to use it.
...
Fix reversed byte ordering of multi-byte HID data.
Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index.
Removed the HID_IOF_NON_VOLATILE and HID_IOF_VOLATILE flags from HID INPUT items where the flag is invalid. Changed over HID OUTPUT items to use HID_IOF_NON_VOLATILE.
Change over MagStripe project to use HID_DESCRIPTOR_KEYBOARD() for its HID report. Change over MouseHostDevice demo to use HID_DESCRIPTOR_MOUSE() for its HID report.
2011-01-30 14:14:04 +00:00
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
2011-01-26 21:33:07 +00:00
6c7ed7ecd6
Added new HID_DESCRIPTOR_MOUSE, HID_DESCRIPTOR_KEYBOARD and HID_DESCRIPTOR_JOYSTICK macros for easy automatic creation of basic USB HID device reports.
2011-01-23 20:02:51 +00:00
ef44b8c036
Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey).
...
Add in newHID_KEYBOARD_SC_POWER keyboard scancode constant.
2011-01-17 23:11:13 +00:00
efd57cfe51
Abuse the the C preprocessor so that the HID macros can automatically encode data into the array from the HID macros automagically, by specifying the bit-width of the data, and the data itself as a single integer value of that width.
2011-01-17 19:44:48 +00:00
47fec03694
Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect error code enum (thanks to Daniel Seibert).
2011-01-16 23:13:54 +00:00
787869c2fd
Minor documentation corrections for the new HID report item constant defines.
2011-01-16 19:41:26 +00:00
039a714ee4
New HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors.
...
Changed over all project and demo HID report descriptors to use the new HID report item macros.
Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/.
2011-01-16 19:34:28 +00:00
Dean Camera