5563da6a62
Added new LEDs_Disable(), Buttons_Disable() and Joystick_Disable() functions to the board hardware drivers.
2012-01-29 14:33:36 +00:00
a147cee95f
Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver.
2012-01-28 18:07:35 +00:00
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
2012-01-02 05:43:23 +00:00
154d28e39f
Fixed incorrect implementation of LEDs_ToggleLEDs() for the Adafruit-U4 board (thanks to Caroline Saliman).
2011-12-26 13:23:43 +00:00
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
2011-12-23 01:51:39 +00:00
77f354609f
Fixed compiler warning on GCC with -wundef compile flag is used (thanks to Georg Glock).
2011-12-20 13:15:36 +00:00
676de74d9b
Don't validate the Device Descriptor's vendor ID when validating that a device is an Android Accessory device; the Product ID and (later) Accessory protocol support is enough to probe AOA class support without having to maintain a list of Android device manufacture VID values.
2011-12-14 02:52:42 +00:00
84a739ae72
Minor XMEGA USB driver fixes.
2011-12-13 03:40:51 +00:00
ec3e47a7d0
Change PIPE_PIPENUM_MASK from 0x07 to the more generic 0x0F to allow for full pipe address support in USB host architectures other than the current AVR8 devices. Minor documentation improvements.
2011-12-11 03:04:16 +00:00
0c59d5993e
Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without having to reset the Mass Storage interface.
...
Altered the Mass Storage Host LowLevel demo so that SCSI data STALLs from the attached device can be recovered from automatically without having to reset the Mass Storage interface.
2011-12-01 08:39:43 +00:00
798cc84ff5
Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming session is exited.
2011-11-29 13:33:28 +00:00
259a3c9854
Fix typo in the Joystick board driver documentation example code.
2011-11-29 11:31:00 +00:00
70f3d8e933
Add support for the Paranoid Studio USB2AX boards (hardware revisions 1-3).
2011-11-28 23:43:58 +00:00
2b23318357
Add dummy board documentation nodes for the XPLAIN_REV1 and TEENSY2 meta board targets.
2011-11-28 13:15:27 +00:00
cdd4e11fa8
Oops - fix incorrect value of AOA_CSCP_AOADataSubclass in the Android Open Accessory class driver.
2011-11-24 21:35:22 +00:00
38d7cdf803
Minor Doxygen documentation improvements.
...
Add missing ATTR_NON_NULL_PTR_ARG and const decorations.
2011-11-24 11:59:52 +00:00
3b99abb5fc
Add new USB_Host_GetDescriptor() function. Alter the USB_Host_GetDeviceDescriptor() and USB_Host_GetDeviceStringDescriptor() convenience functions so that they wrap the new function.
2011-11-24 11:46:04 +00:00
e915d968a5
Added new USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions.
2011-11-24 11:33:10 +00:00
7f8dbb4908
Convert the LowLevel AndroidAccessory demo to use the new class driver constants to reduce code duplication.
...
Add missing Doxygen documentation.
2011-11-24 01:31:31 +00:00
8b5aa61601
Add new Android Open Accessory class driver to the library core and add a new Android Open Accessory Host ClassDriver demo.
2011-11-24 01:24:01 +00:00
d619214854
Update library to indicate support for the Android Accessory Host demo.
2011-11-23 06:59:27 +00:00
4f223302b1
Oops: Typo on the new TEENSY2 board support.
2011-11-23 00:25:20 +00:00
a81ccd83fd
Added support for version 2 of the Teensy boards (thanks to Christoph Redecker).
2011-11-23 00:15:58 +00:00
09577fe541
Add XMEGA compile time tokens to the LUFAConfig.h code template.
...
Add additional compile time errors to the XMEGA and AVR8 architectures if multiple USE_*_DESCRIPTORS compile time tokens are enabled.
Add support for the NO_INTERNAL_SERIAL compile time token on the XMEGA targets.
2011-11-23 00:04:16 +00:00
b711b7d6a4
Fixed broken AVR32 endpoint/pipe communications when ORDERED_EP_CONFIG compile time option is not enabled (thanks to Matthias).
...
Fixed broken compilation for the AVR32 devices if the NO_SOF_EVENTS compile time option was not enabled (thanks to Matthias).
2011-11-22 08:06:52 +00:00
eb2e883fd3
Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities.
2011-11-18 06:26:51 +00:00
3e04487279
Fixed misspelled HID_KEYBOARD_MODIFIER_* macros in the HID class driver (thanks to Laszlo Monda).
2011-11-16 08:19:34 +00:00
dc09ccab8b
Minor corrections for the XMEGA USB controller. Add compile time warning if the USB clock frequency is provably incorrect.
2011-11-14 07:31:40 +00:00
e30be658c9
Add missing SVN eol-style property to ensure that source code line endings and converted to the native values on checkout.
2011-11-09 23:35:16 +00:00
8df0cf3241
Fixed race conditions in the CDC, HID and Mass Storage class drivers when processing some control requests.
2011-11-09 12:29:14 +00:00
2b54cd984d
Fix typos in makefile templates.
2011-11-09 12:09:13 +00:00
0ad6f1fb53
Add partial support for the Atmel A3BU Xplained's Dataflash IC (physical USART-as-SPI transport driver still pending).
2011-11-01 06:06:41 +00:00
cb7f7a8241
Fix XMEGA core USB driver endpoint code to prevent incorrect STALL determination.
2011-11-01 06:05:54 +00:00
139c1afeeb
Add XMEGA SPI peripheral driver.
2011-10-31 04:30:47 +00:00
7992202603
Add support for the new MEGA B series devices.
2011-10-31 03:39:12 +00:00
00ad509061
Add support for the Atmel XMEGA A3BU Xplained board.
...
More XMEGA USB core fixes.
2011-10-31 03:31:00 +00:00
0304916356
Fix XMEGA core USB driver so that device mode enumerates correctly on the host PC.
2011-10-31 02:26:21 +00:00
eb5b8a32e4
Added INVERTED_ISP_MISO compile time option to the AVRISP-MKII clone project (thanks to Chuck Rohs).
2011-10-30 14:12:11 +00:00
1e0c3bc69a
Namespace out the internal endpoint globals in the XMEGA architecture.
2011-10-30 14:05:34 +00:00
fe87b8a225
Update ENDPOINT_EPNUM_MASK to be 0x0F, the maximum possible USB endpoint number within a device, rather than just the maximum number for the AVR8 and UC3 targets of 0x07.
2011-10-30 14:04:47 +00:00
72717825e5
Namespace out the internal endpoint and pipe globals in the UC3 architecture.
2011-10-30 14:03:53 +00:00
b714ffbfa0
Update XMEGA clock management so that the correct 16-bit calibration is used when requested. Fix endpoint descriptor table so that the frame number is stored into the correct location. Add compile time option to source the USB clock from the PLL rather than the internal 32MHz RC oscillator.
2011-10-30 12:06:02 +00:00
c739974292
Fix error in XMEGA clock platform driver for the DFLL calibration byte order.
2011-10-30 07:43:13 +00:00
ab43251bf9
Minor documentation fixes.
2011-10-30 07:09:44 +00:00
028a3c4ab3
XMEGA port improvements; connection and disconnection are now detected correctly. Fixed incorrect interrupt priority levels being set for XMEGA devices.
2011-10-30 07:09:20 +00:00
f1543ae8ff
Fixed CDC class drivers not saving and sending all 16-bits of the control line states (thanks to Matthew Swabey).
2011-10-26 06:51:07 +00:00
bc14c1a7f6
Update XMEGA platform clock management example code to suit the currently released silicon.
...
Cleanups to the UC3 endpoint/pipe multi byte read code.
2011-10-25 04:28:22 +00:00
e9029d49d5
Rename the Doxygen page source directory from ManPages/ to DoxygenPages/ to prevent user confusion with the actual *nix Man tool.
2011-10-18 11:35:04 +00:00
3aa8a69246
Fixed AVRISP-MKII Clone compile warning on AVR8 U4 targets even when NO_VTARGET_DETECT is enabled.
2011-10-18 11:31:03 +00:00
738c9203fc
Fixed ring buffer size limited to 255 elements, instead of the intended 65535 elements.
2011-10-18 11:23:23 +00:00
c6d6bdae0a
Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair).
2011-10-12 05:31:35 +00:00
c15eaa5dae
When automatic PLL management mode is enabled on the U4 series AVR8 chips, the PLL is now configured for 48MHz and not a divided 96MHz, to lower power consumption and to keep the system within the datasheet specs for 3.3V operation (thanks to Scott Vitale).
2011-10-12 02:27:22 +00:00
1a4a26271e
Added User Application APIs to the CDC and DFU class bootloaders.
2011-10-11 06:20:18 +00:00
beb069b9b8
Commit for the 111009 release.
2011-10-10 10:04:25 +00:00
c9e817ff47
Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos.
...
Fix additional warnings under GCC 4.6.
2011-10-09 13:14:53 +00:00
68e777e16b
Prevent written but unused variable warnings on GCC 4.6 with dummy reads.
2011-10-09 12:54:50 +00:00
a4d67bb6ff
USB XMEGA support improvements; add DFLL clock platform support, ensure the endpoint table is correctly aligned and configured in the USB controller.
2011-10-07 05:52:35 +00:00
db73b11244
Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair).
2011-10-07 04:40:56 +00:00
6553bf5bfb
Fix incorrect function call name in USB_Host_SendControlRequest() for AVR8 devices.
2011-10-07 04:38:53 +00:00
2ae41fb153
Added endian-correction to the CDC driver's Line Encoding control request handlers.
2011-10-07 03:47:42 +00:00
3bb8055459
Fix compile errors for the USB XMEGA parts when the USB driver is used.
...
Add core support for the ATXMEGA64A1U.
Minor documentation corrections.
2011-10-04 11:40:55 +00:00
3223786c49
Fix compile error on the UC3 targets when INTERRUPT_CONTROL_ENDPOINT compile time option is used (thanks to Ian Woloschin).
...
Small size improvement for Little Endian devices when USB host mode is used.
Minor documentation fixes.
2011-09-28 13:24:08 +00:00
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
2011-09-22 05:55:32 +00:00
022fa26b43
Fix missing C++ linkage command in ArchitectureSpecific.h.
...
Fix missing closing brace in an Endpoint function for the UC3 targets.
2011-09-21 23:40:05 +00:00
b5682f2c44
Add project name to the Doxygen makefile target output.
2011-09-21 06:45:09 +00:00
06de32b1c2
Commit for the 111009 BETA release.
2011-09-21 06:28:42 +00:00
99ff27e403
Fixed HID Parser's largest report size bit count not including the size of the last parsed report item.
...
Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255.
2011-09-17 13:07:21 +00:00
d881e0cbf6
Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov).
2011-09-07 12:05:37 +00:00
4b229cb5ef
Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was NULL (which should be allowable according to the API).
...
Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer.
2011-09-07 10:18:49 +00:00
94e0a0058a
Oops - restore conditional calls to USB_USBTask() in the Mass Storage class driver for the non-stream loops.
2011-09-05 22:22:19 +00:00
e64f4b0cd9
Update the TempDataLogger project and driver documentation to use the new TWI_BITLENGTH_FROM_FREQ() macro.
2011-09-02 04:41:43 +00:00
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
2011-09-02 04:38:56 +00:00
88d022a752
Make TWI_ReadPacket() use a repeated start condition rather than a full bus release/recapture after the read address has been sent.
...
Fix TWI_ReadPacket() not releasing the bus correctly after all data transferred.
Make TWI_SendByte() and TWI_ReceiveByte() non-inline to reduce compiled binary size.
2011-08-31 07:17:33 +00:00
dc9133ad21
Move documentation for the USB_HOST_TIMEOUT_MS into the HostStandardReq module where it is used.
2011-08-28 03:44:22 +00:00
3b898ae178
Remove redundant prototype for Audio_Host_StartStopStreaming() and Audio_Host_GetSetEndpointProperty(). Update host mode Audio class inline functions to prevent unused parameter warnings.
2011-08-28 01:40:36 +00:00
a233109909
Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, and not a Pipe within the host.
...
Updated MS_Host_ResetMSInterface() to now perform a full Mass Storage reset sequence to prevent data corruption in the event of a device lock up or timeout (thanks to David Lyons).
Add parenthesis around the library Endianness macros that do nothing on a particular architecture to prevent operator precedence issues depending on usage.
Minor documentation corrections.
2011-08-24 09:50:21 +00:00
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
2011-08-23 10:39:04 +00:00
2d9f98b592
Add multiple axis support to the HID joystick report in the HID_DESCRIPTOR_JOYSTICK() macro.
2011-08-23 07:07:34 +00:00
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
2011-08-22 13:03:56 +00:00
40946a5704
Minor documentation corrections.
2011-08-19 06:11:39 +00:00
ccf4cffd78
Improve device support documentation in the manual; split out each architecture into a different sub-page of the Device Support section of the manual, add in table to indicate USB mode support for each microcontroller model.
2011-08-19 06:04:39 +00:00
af725dd418
Fix TWI peripheral driver example code in the library documentation.
2011-08-19 04:11:38 +00:00
9708b45e69
Minor documentation corrections.
2011-08-17 14:51:05 +00:00
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
2011-08-16 05:53:04 +00:00
3478178127
Add shortcuts to SwapEndian_16() and SwapEndian_32() internal functions to improve optimization if called with constant inputs.
2011-08-16 05:00:45 +00:00
c505ba047f
Set HOST_DEVICE_SETTLE_DELAY_MS to zero for the incomplete AndroidAccessoryHost demo to prevent a timeout on the Android device from aborting Accessory mode after a command it sent to switch modes (thanks to Opendous Inc).
2011-08-09 16:38:35 +00:00
ddae47979d
Update LUFAConfig.h with missing options for the AVR32 target.
...
Add Binary Page Mode fuse command bytes to the AT45DB642D.h Dataflash header.
2011-08-04 05:32:17 +00:00
aceb015ea7
Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden).
2011-07-30 02:49:59 +00:00
40728fd20d
Remove redundant calls to USB_USBTask() in the Mass Storage Device Class driver when INTERRUPT_CONTROL_ENDPOINT is not used, as this is done inside the stream callbacks.
...
Fix implementations of Endpoint_SetEndpointDirection() and Endpoint_GetEndpointDirection() for the AVR8 architecture.
2011-07-29 08:12:00 +00:00
025742fca8
Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch).
2011-07-26 03:07:32 +00:00
d5e874d348
Add INTERRUPT_CONTROL_ENDPOINT compile time option support for the UC3 devices.
2011-07-25 09:56:21 +00:00
5c274d106b
Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used.
...
Remove old unused function prototype in the LowLevel MassStorage device demo.
2011-07-25 01:11:24 +00:00
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
2011-07-19 07:02:19 +00:00
2c404e5af5
Add support for the ORDERED_EP_CONFIG compile time token on the UC3 architecture.
2011-07-19 02:42:27 +00:00
69243c5071
Move out the EP_TYPE_* macros to the base USBController.h header, as these are used in the device descriptors as well and thus must not be changed.
2011-07-19 02:15:36 +00:00
06d3797bac
Fix names of XMEGA ClockManagement driver functions.
...
Remove V2 branch for now, to concentrate on a V1 implementation of the USB XMEGAs before large-scale API alterations.
2011-07-18 09:24:50 +00:00
69ab85cbc0
More USB XMEGA porting for Endpoint control.
2011-07-18 07:03:47 +00:00
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
2011-07-15 08:46:08 +00:00
a36012fc4b
Add option to the USB XMEGAs to set the USB bus interrupt priority level.
2011-07-15 08:29:25 +00:00
f07e766755
Complete USB XMEGA interrupt control subsystem code in the core USB driver.
...
Automatically load in the USB calibration bytes from the User Signature Row on start-up.
Create internal SRAM variable for the endpoint control and status register table, used by the XMEGA USB controller hardware.
2011-07-15 08:10:51 +00:00
Dean Camera