06f222b3ed
Added board hardware driver support for the Minimus board (thanks to the PSGroove team).
2010-10-17 23:14:03 +00:00
9aa94fee81
Oops - add missing Maximus board LED hardware driver file.
2010-10-17 23:08:53 +00:00
b4a02fa29d
Added board hardware driver support for the Maximus board (thanks to the PSGroove team).
2010-10-17 23:06:50 +00:00
cb298295fb
Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team).
2010-10-17 23:00:23 +00:00
911170bf0b
Add missing ENDPOINT_ATTR_NO_SYNC and ENDPOINT_USAGE_DATA attributes to the descriptors in the ClassDriver MassStorageKeyboard demo.
2010-10-13 21:10:48 +00:00
9464fa168e
Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for the given endpoint.
2010-10-13 21:05:55 +00:00
421479a4b9
Fix incomplete StandaloneProgrammer project code not compiling due to the recent API changes in the LUFA core.
2010-10-13 14:25:36 +00:00
31daf04c6a
Fix SoftUART.c not compiling due to accidental check in of changes not yet complete in the rest of the XPLAINBridge project code.
2010-10-13 14:23:23 +00:00
3661ae8dfb
Minor documentation corrections.
2010-10-13 14:10:24 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
a8871c7fba
Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured.
...
Small documentation improvements to explicitly reference tokens in Doxygen, to ensure that they are converted to cross-reference links in the output files.
2010-10-12 13:52:06 +00:00
3693916cd3
Fix Webserver project code not compiling due to the changes to the USB mode selection constant names.
2010-10-12 12:25:05 +00:00
7aaced1e8b
Remove USB_MODE_* macros, replace with a semantically linked USB_Modes_t enum.
...
Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic.
Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run.
Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().
2010-10-12 12:22:11 +00:00
c1cfffd8eb
Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings.
2010-10-12 11:27:15 +00:00
bea72a8412
Minor documentation enhancements.
2010-10-12 10:40:42 +00:00
f78b3eb4ef
Remove MIDI ClassDriver device demo's accidental inclusion of the unused ADC peripheral driver header file.
2010-10-10 06:32:48 +00:00
3a03da9705
Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules.
2010-10-10 06:23:45 +00:00
292a631b62
Added new NO_SOF_EVENTS compile time option, enabled in the bootloaders to reduce the compiled binary size.
2010-10-07 11:55:20 +00:00
ccc82ce745
Added board hardware driver support for the Busware CUL V3 board.
...
Added SVN eol-style property to the library driver files that are missing it.
2010-10-06 12:40:20 +00:00
accadba2dd
Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called.
2010-10-06 11:51:53 +00:00
3ae9e6042f
Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.
2010-10-06 10:16:02 +00:00
93793679c9
Revert change to the AVRISP-MKII project for fuse byte programming via the CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
2010-10-02 10:07:24 +00:00
a447ae134f
Fixed broken lock byte programming in the AVRISP-MKII clone project for some XMEGA targets.
2010-10-02 10:02:24 +00:00
824ce10390
Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used.
2010-10-02 08:41:08 +00:00
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
2010-10-01 12:01:54 +00:00
d36c96d6a5
Oops - revert changes to the Device mode Class Driver VirtualSerial demo makefile.
2010-10-01 11:22:54 +00:00
d06febbb59
Fix device mode for the U4 parts.
2010-10-01 11:22:24 +00:00
383d167125
Whitespace corrections.
...
Make Printer Host mode Class driver interface descriptor search routine pre-cast the current interface descriptor to simplify the value checks.
2010-10-01 00:11:32 +00:00
a1e453e900
Make Host mode Class drivers only set the class driver instance's state values once a compatible interface has been found within the device.
2010-09-30 23:23:05 +00:00
86367574e6
Fix incorrectly named configuration descriptor callback routines in the host mode class drivers.
...
Fix typo in MIDI low level device demo.
2010-09-30 08:07:29 +00:00
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
2010-09-30 07:56:47 +00:00
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
2010-09-30 06:23:38 +00:00
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
2010-09-29 13:56:52 +00:00
c0e4f52e8f
Fix up incorrect version numbers in demo/project descriptors.
...
Add class name prefixes to missed constants in the class drivers to give all class driver elements a consistent namespace.
2010-09-28 14:59:16 +00:00
25d896a507
Added board hardware driver support for the Arduino Uno development board.
...
Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver.
2010-09-28 14:30:26 +00:00
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
2010-09-28 13:27:19 +00:00
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
2010-09-28 12:14:06 +00:00
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
2010-09-24 06:59:28 +00:00
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
2010-09-24 06:45:11 +00:00
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
2010-09-24 06:34:43 +00:00
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
2010-09-22 04:20:45 +00:00
c459ef6981
Oops - need to call USB_Attach() when reinitializing into USB Host mode, or no devices will be detected.
2010-09-21 14:06:39 +00:00
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
2010-09-21 10:48:38 +00:00
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
2010-09-19 08:42:30 +00:00
d66a925786
Make device mode configure the control endpoint even before the bus has been reset, so that the device will enumerate correctly on hosts that do not reset the device before initial use.
2010-09-19 06:30:14 +00:00
b17e87d140
More simplifications to USBController.c, fix errors and warnings when compiled for the series 2 USB AVRs.
2010-09-19 06:09:25 +00:00
1621158c62
Fix warning when not compiled for UID auto-selection mode.
2010-09-19 06:00:45 +00:00
e7e1c21bc5
Clean up USBController.c/.h to more clearly seperate out host and device setup and reset paths.
...
Make USBInterrupt.c process all pending USB host mode interrupts before resetting the bus, so that no interrupts are lost when in UID auto-selection mode.
2010-09-19 05:58:27 +00:00
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
2010-09-19 05:46:17 +00:00
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
2010-09-15 13:11:28 +00:00
Dean Camera