b714ffbfa0
Update XMEGA clock management so that the correct 16-bit calibration is used when requested. Fix endpoint descriptor table so that the frame number is stored into the correct location. Add compile time option to source the USB clock from the PLL rather than the internal 32MHz RC oscillator.
2011-10-30 12:06:02 +00:00
c739974292
Fix error in XMEGA clock platform driver for the DFLL calibration byte order.
2011-10-30 07:43:13 +00:00
ab43251bf9
Minor documentation fixes.
2011-10-30 07:09:44 +00:00
028a3c4ab3
XMEGA port improvements; connection and disconnection are now detected correctly. Fixed incorrect interrupt priority levels being set for XMEGA devices.
2011-10-30 07:09:20 +00:00
6519aaa571
Fix incorrect Android Accessory Host interface descriptor subclass value (thanks to Opendous Inc.).
2011-10-28 05:16:38 +00:00
f1543ae8ff
Fixed CDC class drivers not saving and sending all 16-bits of the control line states (thanks to Matthew Swabey).
2011-10-26 06:51:07 +00:00
bc14c1a7f6
Update XMEGA platform clock management example code to suit the currently released silicon.
...
Cleanups to the UC3 endpoint/pipe multi byte read code.
2011-10-25 04:28:22 +00:00
e9029d49d5
Rename the Doxygen page source directory from ManPages/ to DoxygenPages/ to prevent user confusion with the actual *nix Man tool.
2011-10-18 11:35:04 +00:00
3aa8a69246
Fixed AVRISP-MKII Clone compile warning on AVR8 U4 targets even when NO_VTARGET_DETECT is enabled.
2011-10-18 11:31:03 +00:00
738c9203fc
Fixed ring buffer size limited to 255 elements, instead of the intended 65535 elements.
2011-10-18 11:23:23 +00:00
c6d6bdae0a
Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair).
2011-10-12 05:31:35 +00:00
c15eaa5dae
When automatic PLL management mode is enabled on the U4 series AVR8 chips, the PLL is now configured for 48MHz and not a divided 96MHz, to lower power consumption and to keep the system within the datasheet specs for 3.3V operation (thanks to Scott Vitale).
2011-10-12 02:27:22 +00:00
1a4a26271e
Added User Application APIs to the CDC and DFU class bootloaders.
2011-10-11 06:20:18 +00:00
beb069b9b8
Commit for the 111009 release.
2011-10-10 10:04:25 +00:00
c9e817ff47
Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos.
...
Fix additional warnings under GCC 4.6.
2011-10-09 13:14:53 +00:00
68e777e16b
Prevent written but unused variable warnings on GCC 4.6 with dummy reads.
2011-10-09 12:54:50 +00:00
a4d67bb6ff
USB XMEGA support improvements; add DFLL clock platform support, ensure the endpoint table is correctly aligned and configured in the USB controller.
2011-10-07 05:52:35 +00:00
db73b11244
Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair).
2011-10-07 04:40:56 +00:00
6553bf5bfb
Fix incorrect function call name in USB_Host_SendControlRequest() for AVR8 devices.
2011-10-07 04:38:53 +00:00
2ae41fb153
Added endian-correction to the CDC driver's Line Encoding control request handlers.
2011-10-07 03:47:42 +00:00
3bb8055459
Fix compile errors for the USB XMEGA parts when the USB driver is used.
...
Add core support for the ATXMEGA64A1U.
Minor documentation corrections.
2011-10-04 11:40:55 +00:00
3223786c49
Fix compile error on the UC3 targets when INTERRUPT_CONTROL_ENDPOINT compile time option is used (thanks to Ian Woloschin).
...
Small size improvement for Little Endian devices when USB host mode is used.
Minor documentation fixes.
2011-09-28 13:24:08 +00:00
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
2011-09-22 05:55:32 +00:00
022fa26b43
Fix missing C++ linkage command in ArchitectureSpecific.h.
...
Fix missing closing brace in an Endpoint function for the UC3 targets.
2011-09-21 23:40:05 +00:00
b5682f2c44
Add project name to the Doxygen makefile target output.
2011-09-21 06:45:09 +00:00
06de32b1c2
Commit for the 111009 BETA release.
2011-09-21 06:28:42 +00:00
aae59857a2
Add const qualifier to all PROGMEM data to prevent warnings in newer AVR-GCC compiler versions.
2011-09-21 06:25:31 +00:00
8b420566cd
Fix Class Driver GenericHID demo using the wrong size for the returned reports.
2011-09-21 06:09:07 +00:00
99ff27e403
Fixed HID Parser's largest report size bit count not including the size of the last parsed report item.
...
Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255.
2011-09-17 13:07:21 +00:00
d881e0cbf6
Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov).
2011-09-07 12:05:37 +00:00
4b229cb5ef
Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was NULL (which should be allowable according to the API).
...
Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer.
2011-09-07 10:18:49 +00:00
94e0a0058a
Oops - restore conditional calls to USB_USBTask() in the Mass Storage class driver for the non-stream loops.
2011-09-05 22:22:19 +00:00
e64f4b0cd9
Update the TempDataLogger project and driver documentation to use the new TWI_BITLENGTH_FROM_FREQ() macro.
2011-09-02 04:41:43 +00:00
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
2011-09-02 04:38:56 +00:00
88d022a752
Make TWI_ReadPacket() use a repeated start condition rather than a full bus release/recapture after the read address has been sent.
...
Fix TWI_ReadPacket() not releasing the bus correctly after all data transferred.
Make TWI_SendByte() and TWI_ReceiveByte() non-inline to reduce compiled binary size.
2011-08-31 07:17:33 +00:00
dc9133ad21
Move documentation for the USB_HOST_TIMEOUT_MS into the HostStandardReq module where it is used.
2011-08-28 03:44:22 +00:00
3b898ae178
Remove redundant prototype for Audio_Host_StartStopStreaming() and Audio_Host_GetSetEndpointProperty(). Update host mode Audio class inline functions to prevent unused parameter warnings.
2011-08-28 01:40:36 +00:00
a233109909
Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, and not a Pipe within the host.
...
Updated MS_Host_ResetMSInterface() to now perform a full Mass Storage reset sequence to prevent data corruption in the event of a device lock up or timeout (thanks to David Lyons).
Add parenthesis around the library Endianness macros that do nothing on a particular architecture to prevent operator precedence issues depending on usage.
Minor documentation corrections.
2011-08-24 09:50:21 +00:00
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
2011-08-23 10:39:04 +00:00
2d9f98b592
Add multiple axis support to the HID joystick report in the HID_DESCRIPTOR_JOYSTICK() macro.
2011-08-23 07:07:34 +00:00
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
2011-08-22 13:03:56 +00:00
40946a5704
Minor documentation corrections.
2011-08-19 06:11:39 +00:00
ccf4cffd78
Improve device support documentation in the manual; split out each architecture into a different sub-page of the Device Support section of the manual, add in table to indicate USB mode support for each microcontroller model.
2011-08-19 06:04:39 +00:00
af725dd418
Fix TWI peripheral driver example code in the library documentation.
2011-08-19 04:11:38 +00:00
9708b45e69
Minor documentation corrections.
2011-08-17 14:51:05 +00:00
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
2011-08-16 05:53:04 +00:00
3478178127
Add shortcuts to SwapEndian_16() and SwapEndian_32() internal functions to improve optimization if called with constant inputs.
2011-08-16 05:00:45 +00:00
ef4cff29c3
Fix TempDataLogger project logging interval always being 500ms more than the requested interval.
2011-08-16 04:07:39 +00:00
c505ba047f
Set HOST_DEVICE_SETTLE_DELAY_MS to zero for the incomplete AndroidAccessoryHost demo to prevent a timeout on the Android device from aborting Accessory mode after a command it sent to switch modes (thanks to Opendous Inc).
2011-08-09 16:38:35 +00:00
ddae47979d
Update LUFAConfig.h with missing options for the AVR32 target.
...
Add Binary Page Mode fuse command bytes to the AT45DB642D.h Dataflash header.
2011-08-04 05:32:17 +00:00
Dean Camera