15fb6351e5
Move USB mode enum into the top level USB controller header, as it is common to all architectures (even if not all modes are supported).
2013-04-28 11:31:28 +00:00
8232721102
Fixed possible register corruption in USB Host mode on AVR8 devices when ORDERED_EP_CONFIG is used (thanks to Martin Aakerberg).
2013-04-21 19:06:34 +00:00
03cdb09071
Minor documentation improvements.
2013-03-18 19:24:55 +00:00
da42e8840d
Suppress unused function parameter warnings in the USB driver.
2013-01-27 19:48:29 +00:00
fb18c315d0
Fix broken XMEGA USB support.
2013-01-27 19:35:40 +00:00
de0df8b162
Update copyright year to 2013.
2013-01-03 11:37:33 +00:00
2608fd1dd4
Fixed hardware race condition that could cause failed device enumerations for AVR8 and UC3 architectures (thanks to Mike Beyhs).
...
Fixed incorrect Minimus board LED definitions (thanks to Joonas Lahtinen).
Fixed incorrect LED masks for received data display in the Device GenericHID demos (thanks to Denys Berkovskyy).
2013-01-03 10:53:47 +00:00
7d037c7db8
Remove support for devices that were not put into production.
2013-01-03 10:49:44 +00:00
72fc4a204d
Clean up unnecessary CPPCheck static analysis suppression comments, force Doxygen and GCC compiler specific macros as being always undefined when performing a static analysis of the code.
2012-10-14 20:18:46 +00:00
eee252603b
Minor documentation improvements.
2012-10-05 20:22:19 +00:00
7a51e97c3b
Update LUFA core to be compatible with the AVR-GCC -Wswitch-default warning switch.
2012-09-09 14:00:03 +00:00
44aea22949
Fixed logic hole breaking USB operations on a USB controller with only one supported USB mode and no USB_DEVICE_ONLY or USB_HOST_ONLY configuration token set.
2012-08-28 20:09:14 +00:00
ff00644cb8
Minor documentation corrections.
2012-08-27 16:55:52 +00:00
7750783809
Minor documentation improvements.
2012-08-18 10:58:52 +00:00
ffbb30e0f8
Added workaround for broken VBUS detection on AVR8 devices when a bootloader starts the application via a software jump without first turning off the OTG pad (thanks to Simon Inns)
2012-08-12 13:46:24 +00:00
5b8b5018f2
Minor documentation improvements.
2012-07-15 18:49:42 +00:00
ef06eefc8b
Add svn:eol-style property on all source files where it was missing. Fix line endings of all makefile, *.c and *.h files.
2012-06-21 20:27:00 +00:00
c41bbf9fcc
Add checks to the endpoint and pipe configure functions and fail if the requested endpoint or pipe number is above the maximum for that device.
2012-06-10 19:53:20 +00:00
3808f5c36d
Spell check source code, fix mistakes.
2012-06-09 20:33:56 +00:00
6e29655b54
Update SVN line endings property on newer source files to native.
2012-06-07 20:49:47 +00:00
f2ae4dc255
Upgrade Doxygen configuration files for Doxygen 1.8.1, fix broken stylesheet and footer HTML, add explicit spacing into documentation code fragments to prevent Doxygen from removing empty lines in the output.
2012-05-20 10:55:59 +00:00
c9b3468f1e
Add missing CPPCheck unusedFunction check suppressions on the USB template functions.
2012-05-19 22:14:06 +00:00
380f014c4c
Added build test to verify correct compilation of all bootloaders using all supported devices.
...
Fixed compile error with the unreleased ATMEGA32U6 device.
2012-05-13 13:06:11 +00:00
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
2012-04-14 14:41:17 +00:00
8f4f48d963
Add architecture guards to all architecture-specific files, so that they can be bulk-added to existing IDE projects without having to exclude unused architecture files.
2012-04-07 17:01:46 +00:00
8a9e30a0cb
Fixed possible enumeration error if the user application selects the non-Control pipe between the Powered and Default states of the host state machine.
2012-02-26 15:01:36 +00:00
e406140f11
Minor documentation fixes - change \note entries to \warning where appropriate and remove/update old documentation.
2012-02-24 20:25:36 +00:00
c60897df39
Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet, as this appears to be implemented in hardware.
2012-02-08 18:35:16 +00:00
a677254026
Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.).
2012-02-05 15:19:01 +00:00
f1b6ddb710
Update file contributor copyrights for 2012.
2012-02-04 22:38:44 +00:00
2c806f6cee
Update file header copyrights for 2012.
2012-02-04 22:32:30 +00:00
fc4d3ab400
Minor documentation improvements.
2012-02-01 21:28:25 +00:00
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
2011-12-23 01:51:39 +00:00
09577fe541
Add XMEGA compile time tokens to the LUFAConfig.h code template.
...
Add additional compile time errors to the XMEGA and AVR8 architectures if multiple USE_*_DESCRIPTORS compile time tokens are enabled.
Add support for the NO_INTERNAL_SERIAL compile time token on the XMEGA targets.
2011-11-23 00:04:16 +00:00
ab43251bf9
Minor documentation fixes.
2011-10-30 07:09:44 +00:00
c15eaa5dae
When automatic PLL management mode is enabled on the U4 series AVR8 chips, the PLL is now configured for 48MHz and not a divided 96MHz, to lower power consumption and to keep the system within the datasheet specs for 3.3V operation (thanks to Scott Vitale).
2011-10-12 02:27:22 +00:00
68e777e16b
Prevent written but unused variable warnings on GCC 4.6 with dummy reads.
2011-10-09 12:54:50 +00:00
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
2011-09-22 05:55:32 +00:00
dc9133ad21
Move documentation for the USB_HOST_TIMEOUT_MS into the HostStandardReq module where it is used.
2011-08-28 03:44:22 +00:00
a233109909
Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, and not a Pipe within the host.
...
Updated MS_Host_ResetMSInterface() to now perform a full Mass Storage reset sequence to prevent data corruption in the event of a device lock up or timeout (thanks to David Lyons).
Add parenthesis around the library Endianness macros that do nothing on a particular architecture to prevent operator precedence issues depending on usage.
Minor documentation corrections.
2011-08-24 09:50:21 +00:00
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
2011-08-23 10:39:04 +00:00
40728fd20d
Remove redundant calls to USB_USBTask() in the Mass Storage Device Class driver when INTERRUPT_CONTROL_ENDPOINT is not used, as this is done inside the stream callbacks.
...
Fix implementations of Endpoint_SetEndpointDirection() and Endpoint_GetEndpointDirection() for the AVR8 architecture.
2011-07-29 08:12:00 +00:00
5c274d106b
Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used.
...
Remove old unused function prototype in the LowLevel MassStorage device demo.
2011-07-25 01:11:24 +00:00
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
2011-07-19 07:02:19 +00:00
69243c5071
Move out the EP_TYPE_* macros to the base USBController.h header, as these are used in the device descriptors as well and thus must not be changed.
2011-07-19 02:15:36 +00:00
f4528c4aef
Add high speed USB support for the UC3 devices containing a high speed USB controller.
...
Add device support preprocessor checks and use symbolic bit names in the UC3 platform clock management driver.
2011-07-14 02:58:07 +00:00
fdb82cd1e8
Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices.
2011-07-12 07:22:36 +00:00
7207b05695
Add missing function attributes.
2011-07-12 05:13:31 +00:00
137ce280c1
Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration instead of manual host state machine manipulations in the main application task.
...
Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device.
Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, by changing the USB_* prefix to USB_Device_* or USB_Host_*.
Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required.
Altered the USB_Host_SetDeviceConfiguration() function to update the new USB_Host_ConfigurationNumber global as required.
Moved out the Host mode standard request convenience/helper functions from the architecture specific Host driver files to the architecture agnostic HostStandardReq.c driver file.
2011-07-08 07:25:56 +00:00
4e601207a7
Tighten up the implementations of the USB_Device_SetDeviceAddress(), USB_Controller_Reset() and USB_PLL_On() functions for the AVR8 devices.
...
Minor corrections to the documentation of the USB_Control_Request_t enum.
2011-07-06 02:50:08 +00:00
Dean Camera