41b54a2acd
Set all CDC and MassStorage device mode demos (LowLevel and ClassDriver) to use the USE_INTERNAL_SERIAL feature, add compile time warnings for devices which do not have an internal serial.
2009-07-30 11:03:58 +00:00
ce3ea6fb25
Added standard stream example to the ClassDriver CDC device demo.
...
Fix incorrect HWB button mask in the STK526 Buttons driver.
2009-07-30 10:54:57 +00:00
5ca1d7bf8f
Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does not support USB host mode.
2009-07-30 07:45:36 +00:00
fef185a409
Cleanup USBMode.h to simplify preprocessor logic.
2009-07-29 02:49:34 +00:00
bb05712efe
Added 404 errors to the RNDIS Webserver example.
2009-07-29 01:40:42 +00:00
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
2009-07-28 16:12:09 +00:00
7f3f39b575
Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.
...
Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.
2009-07-28 15:14:54 +00:00
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
2009-07-28 13:53:52 +00:00
e426463355
Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.
2009-07-28 13:12:14 +00:00
c1be307393
Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.
2009-07-28 13:01:44 +00:00
23c1653efe
Make LowLevel AudioOutput demo work in the same way as the ClassDriver AudioOutput demo for LEDs output.
2009-07-28 10:49:33 +00:00
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
2009-07-28 10:46:20 +00:00
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
2009-07-27 23:19:17 +00:00
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
2009-07-27 10:55:21 +00:00
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
2009-07-27 10:48:55 +00:00
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
2009-07-27 10:31:07 +00:00
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
2009-07-26 10:45:33 +00:00
cbbd3d746a
Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions.
2009-07-26 10:22:16 +00:00
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
2009-07-24 01:44:01 +00:00
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
2009-07-24 01:26:36 +00:00
2a0c28e6e4
Minor updates to the Benito programmer - remove redundant PORT register manipulations.
2009-07-23 14:11:20 +00:00
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
2009-07-23 11:01:32 +00:00
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
2009-07-23 10:39:10 +00:00
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
2009-07-23 08:00:12 +00:00
7a5d045987
Slight changes to TeensyHID bootloader to ensure it builds under the 2KB boundary.
...
Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
2009-07-21 13:51:34 +00:00
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
44179abcf8
Add PrinterHost demo to the documentation.
2009-07-21 10:29:56 +00:00
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
2009-07-21 04:46:48 +00:00
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
2009-07-21 02:48:41 +00:00
bf50959b80
Simplify SideShow GUID compares via a macro.
2009-07-20 14:51:19 +00:00
86819ba9d8
Fixes to unfinished SideShow demo to re-enable correct building after previous commit.
2009-07-20 14:27:14 +00:00
292fc9b65e
Move unfinished SideShow source files to nested Lib directory for clarity.
2009-07-20 14:23:47 +00:00
18f7cd3325
Ensure control pipe is selected in the PrinterHost demo before trying to send control requests.
2009-07-20 14:12:05 +00:00
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
2009-07-20 14:07:02 +00:00
73a21890f6
Added missing DoxyGen configuration file to the PrinterHost demo.
2009-07-20 13:52:45 +00:00
8a28fd8e6c
Added extra DoxyGen documentation to the new PrinterHost demo.
2009-07-20 13:49:26 +00:00
3ee3ed2d6d
Add PrinterHost to the project file and Host LowLevel directory makefile.
2009-07-20 13:41:37 +00:00
2a90f66de2
Moved PrinterHost demo from Incomplete to LowLevel, as it is now near-complete.
2009-07-20 13:37:20 +00:00
f3c061d5c8
Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews).
...
Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).
2009-07-20 10:19:13 +00:00
211712d66d
Remove ClearPipeStall routine from the StillImageHost demo, as there is now a version of the function built into the library itself.
2009-07-20 03:14:41 +00:00
4c035b14f1
Cleaner solution to the PrinterHost data send routine problem of embedded NULLs - use a special structure to hold the data string plus the length in bytes of the data.
2009-07-20 03:07:27 +00:00
5d8cdd9bea
Fix unfinished printer host demo - some printer languages use embedded NULLs and so strlen() won't work in all cases. Ensure NULL terminator for the test page is not transmitted to the device.
2009-07-20 02:59:16 +00:00
8a68203d34
Added error codes to most StillImageHost demo commands.
2009-07-20 02:27:32 +00:00
cf313989e6
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
2009-07-19 13:17:38 +00:00
cc879df4f0
Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.
2009-07-19 13:08:48 +00:00
786479faf0
Add partial project documentation to the incomplete PrinterHost demo.
...
Change over Printer_GetDeviceID() to require a pointer to the destination buffer plus the buffer size, rather than using a pointer to a special structure.
Make new Printer_SendData() function to hide the implementation of sending data to an attached printer, cleaning up the main demo source file body.
2009-07-19 12:36:19 +00:00
d3fb6273aa
Fix PrinterHost demo so that it will only enumerate printers with Bidirectional protocol encapsulation. Change enumeration code to automatically select the correct alternate setting for the printer interface to select the bidirectional protocol.
2009-07-19 09:36:16 +00:00
9d2613d908
Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).
2009-07-19 09:04:25 +00:00
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
2009-07-19 07:30:37 +00:00
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
2009-07-16 15:00:10 +00:00
Dean Camera