f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
2011-12-23 01:51:39 +00:00
77f354609f
Fixed compiler warning on GCC with -wundef compile flag is used (thanks to Georg Glock).
2011-12-20 13:15:36 +00:00
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
2011-09-22 05:55:32 +00:00
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
2011-09-02 04:38:56 +00:00
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
2011-08-23 10:39:04 +00:00
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
2011-08-16 05:53:04 +00:00
01d269879f
Add new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros.
2011-07-14 00:11:51 +00:00
d9643cf6ec
Add start of an architecture port to the Atmel USB XMEGA devices.
2011-07-13 23:50:05 +00:00
bfa22eca26
Split out compiler specific helper macros into a new CompilerSpecific.h header file inside the library, for future expansion.
2011-07-06 02:11:13 +00:00
d784baaa3a
Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time option was not enabled on the AVR8s.
...
Add C++ compatibility to some header files currently missing extern "C" linkage.
2011-06-20 04:32:34 +00:00
f01a05415c
Spell check library source code files.
2011-06-01 14:33:40 +00:00
7d3150423d
Add new USE_LUFA_CONFIG_HEADER compile time option.
...
Add missing LEDS_ToggleLEDs() function to the LED driver for the EVK1101 board.
2011-05-09 14:04:40 +00:00
a85fa30bf1
Minor documentation fixes.
2011-05-08 14:30:36 +00:00
f670bdeff8
Add __VA_ARGS__ support to the LUFA supplied ISR macro. Add proper result typecasting to the SWAPENDIAN_* macros.
...
Switch to using -1 on the UC3 target to obtain a register mask with all bits set (for clearing interrupts and status flags).
Fix incorrect USB controller mode on the UC3 when a fixed mode is specified as a compile time option due to AVR32_USBB.USBCON.uide being set by default.
Make USB_Descriptor_String_t use a uint16_t for Unicode strings on all targets except the AVR8 (retained for backwards compatibility).
2011-04-25 07:28:36 +00:00
04263de4f0
Fix definition of pgm_read_ptr().
2011-04-13 06:58:29 +00:00
995195a2b0
Add missing function attributes to the pipe/endpoint functions for all architectures.
...
Perform endianness correction in the HID report parser for big-endian platforms.
2011-04-12 03:03:56 +00:00
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
2011-04-10 06:43:02 +00:00
d08116b02f
Create a new Common module documentation group for the new Global Interrupt macros.
2011-04-08 05:54:56 +00:00
c263ea837a
Move global interrupt enable/disable functions out to Common.h and document them.
2011-04-08 05:40:25 +00:00
de9bd767dc
Correct UC3 global interrupt functions.
...
Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.
Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.
2011-04-08 05:05:05 +00:00
70284d390f
Add in a new common Delay_MS() function, which provides a blocking delay for all architectures.
...
Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.
Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.
2011-04-08 04:49:20 +00:00
f595043584
Add in new architecture attribute defines to selectively remove the EEPROM and FLASH memory space functions on architectures which do not have seperate memory address spaces.
2011-03-21 11:10:02 +00:00
5eb1862d54
Remove redundant Doxygen guards from the internal preprocessor definitions.
2011-03-15 09:22:39 +00:00
944e0d2009
Rename UC3B driver files to UC3, as they are generic to all AVR32 UC3 models.
2011-03-13 21:53:19 +00:00
6005a42150
Add experimental support for the UC3A0, UC3A1 and UC3A3 series AVR32 microcontrollers.
2011-03-13 21:25:05 +00:00
f301a4a21f
Oops - rename misnamed Endianess.h header file.
...
Remove UC3B temp macros related to EEPROM, to ensure that projects requiring this break at compile time rather than at runtime until a solution can be found.
2011-03-13 06:05:30 +00:00
b1528a1256
Move out endianness management macros into a new common Endianness.h header.
...
Fix Doxygen documentation, broken due to the added ATTR_PACKED attribute on some structs breaking the Doxygen parser.
2011-03-13 05:54:13 +00:00
e4b3e3fc65
Fix UC3B architecture compile errors and ensure the architecture can be compiled with no special makefile tokens defined.
2011-03-05 16:36:57 +00:00
b763c3f33e
Porting updates for the UC3B architecture - get UC3B partially enumerating using a modified mouse demo on the EVK1101. Implement a software FIFO for the endpoint banks; datasheet hints that this can be done through hardware as on the AVR8 architecture, but the correct method to do this not discovered yet.
2011-03-05 11:34:04 +00:00
8c6f26e19d
Add in USB_INT_RegisterHandlers() internal function to register the interrupt handler routines used by LUFA. Add dummy loads after clearing the interrupt lines according to the datasheet.
...
Add in temporary global interrupts enable/disable macros.
2011-02-28 22:30:40 +00:00
4a3b70e727
Fix USB Host mode compile errors for the UC3B architecture.
2011-02-27 15:23:09 +00:00
381dd0d490
Move out common architecture-independent core definitions into the appropriate core dispatch header files.
2011-02-27 14:39:49 +00:00
f3f481183a
More AVR32 UC3B architecture ports - USB device mode applications can now be sucessfully compiled, although they will be currently non-functional.
2011-02-27 14:04:29 +00:00
a318f32b31
Update board driver common APIs to use uint_reg_t.
2011-02-20 19:18:06 +00:00
cad5e9ffca
Added start of a port of the core USB driver code to the AVR32 UC3B architecture.
2011-02-20 17:53:17 +00:00
f3ec62b5c6
More updates to remove architecture-specific comments from the documentation, alter USBMode.h preprocessor logic to support future architectures more easily.
2011-02-20 14:43:13 +00:00
28a1ee29a1
More Doxygen updates for multiple architecture support.
2011-02-20 14:07:20 +00:00
5e73190582
Start update of documentation to support possible multiple architectures in the future - alter \file documentation to automatically copy in the module documentation where possible.
2011-02-20 13:08:29 +00:00
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
2011-02-19 18:37:22 +00:00
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
2011-01-26 21:33:07 +00:00
7dc3d3a68f
Minor documentation improvements.
2011-01-08 11:47:20 +00:00
1d433d4506
Update copyright year on all source files.
2011-01-01 13:00:56 +00:00
6026b9128b
Fix compile errors from the changes to the SerialStream and board Temperature drivers.
2010-12-26 15:44:10 +00:00
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
2010-12-26 14:25:34 +00:00
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
2010-12-26 13:01:37 +00:00
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
2010-10-28 06:08:58 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
2010-09-22 04:20:45 +00:00
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
2010-07-30 10:58:16 +00:00
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
2010-07-30 09:48:35 +00:00
Dean Camera