f2ae4dc255
Upgrade Doxygen configuration files for Doxygen 1.8.1, fix broken stylesheet and footer HTML, add explicit spacing into documentation code fragments to prevent Doxygen from removing empty lines in the output.
2012-05-20 10:55:59 +00:00
c9b3468f1e
Add missing CPPCheck unusedFunction check suppressions on the USB template functions.
2012-05-19 22:14:06 +00:00
380f014c4c
Added build test to verify correct compilation of all bootloaders using all supported devices.
...
Fixed compile error with the unreleased ATMEGA32U6 device.
2012-05-13 13:06:11 +00:00
e5a7fa201e
Add support for the ATXMEGA384C3.
2012-05-07 17:40:52 +00:00
0e434c8f8f
Add additional preprocessor sanity checks for the XMEGA platform based on the USB controller input clock speed.
2012-05-05 19:46:20 +00:00
46d511c021
Fixed incorrect DFU version number reported to the host in the DFU bootloader descriptors. Fixed incorrect version hundredths value encoding in VERSION_BCD() macro (thanks to Georg Glock).
2012-05-05 15:25:27 +00:00
c0841d98c5
Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock).
2012-04-15 13:34:11 +00:00
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
2012-04-14 14:41:17 +00:00
8f4f48d963
Add architecture guards to all architecture-specific files, so that they can be bulk-added to existing IDE projects without having to exclude unused architecture files.
2012-04-07 17:01:46 +00:00
00b6b0140f
Re-enable cppcheck static analysis unused function checks after adding in special-case suppressions to the event stub functions. Add missing function prototypes to the AudioInput and AudioOutput class driver device demos.
2012-03-25 12:12:08 +00:00
17f104cbe8
Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid).
2012-03-06 14:50:59 +00:00
8a9e30a0cb
Fixed possible enumeration error if the user application selects the non-Control pipe between the Powered and Default states of the host state machine.
2012-02-26 15:01:36 +00:00
0456dfeb88
Update main library documentation organisation for Doxygen 1.8.0.
2012-02-25 17:07:33 +00:00
e406140f11
Minor documentation fixes - change \note entries to \warning where appropriate and remove/update old documentation.
2012-02-24 20:25:36 +00:00
4068efbd18
Remove potentially unaligned uint32_t access in HIDParser.c, replace with standard C bit shifts.
2012-02-20 18:47:25 +00:00
84ff878fd7
Fix errors uncovered by the new build test compile warnings; fix UC3 pipe configuration function broken, redundant function prototypes and unused parameters.
2012-02-19 15:26:42 +00:00
1132488e8f
Add build tests to verify correct compilation of as many modules as possible under as many architectures as possible.
...
Fix broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file.
Fix missing semicolon in the UC3 architecture host pipe functions.
Fix failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified.
2012-02-18 23:33:12 +00:00
385ffb6de3
Fix XMEGA architecture not correctly resetting the device address and endpoints in response to a USB bus reset from the host.
2012-02-09 20:27:03 +00:00
c60897df39
Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet, as this appears to be implemented in hardware.
2012-02-08 18:35:16 +00:00
fdab3aef86
Add (still preliminary) support for the ATXMEGA64A4 and ATXMEGA128A4. Fix minor error in the AVRISP-MKII clone project descriptors.
2012-02-05 21:59:35 +00:00
a677254026
Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.).
2012-02-05 15:19:01 +00:00
f1b6ddb710
Update file contributor copyrights for 2012.
2012-02-04 22:38:44 +00:00
2c806f6cee
Update file header copyrights for 2012.
2012-02-04 22:32:30 +00:00
64e9361298
Minor corrections to the XMEGA USB controller implementation.
2012-02-04 22:16:34 +00:00
fc4d3ab400
Minor documentation improvements.
2012-02-01 21:28:25 +00:00
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
2012-01-02 05:43:23 +00:00
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
2011-12-23 01:51:39 +00:00
84a739ae72
Minor XMEGA USB driver fixes.
2011-12-13 03:40:51 +00:00
ec3e47a7d0
Change PIPE_PIPENUM_MASK from 0x07 to the more generic 0x0F to allow for full pipe address support in USB host architectures other than the current AVR8 devices. Minor documentation improvements.
2011-12-11 03:04:16 +00:00
38d7cdf803
Minor Doxygen documentation improvements.
...
Add missing ATTR_NON_NULL_PTR_ARG and const decorations.
2011-11-24 11:59:52 +00:00
3b99abb5fc
Add new USB_Host_GetDescriptor() function. Alter the USB_Host_GetDeviceDescriptor() and USB_Host_GetDeviceStringDescriptor() convenience functions so that they wrap the new function.
2011-11-24 11:46:04 +00:00
e915d968a5
Added new USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions.
2011-11-24 11:33:10 +00:00
09577fe541
Add XMEGA compile time tokens to the LUFAConfig.h code template.
...
Add additional compile time errors to the XMEGA and AVR8 architectures if multiple USE_*_DESCRIPTORS compile time tokens are enabled.
Add support for the NO_INTERNAL_SERIAL compile time token on the XMEGA targets.
2011-11-23 00:04:16 +00:00
b711b7d6a4
Fixed broken AVR32 endpoint/pipe communications when ORDERED_EP_CONFIG compile time option is not enabled (thanks to Matthias).
...
Fixed broken compilation for the AVR32 devices if the NO_SOF_EVENTS compile time option was not enabled (thanks to Matthias).
2011-11-22 08:06:52 +00:00
dc09ccab8b
Minor corrections for the XMEGA USB controller. Add compile time warning if the USB clock frequency is provably incorrect.
2011-11-14 07:31:40 +00:00
cb7f7a8241
Fix XMEGA core USB driver endpoint code to prevent incorrect STALL determination.
2011-11-01 06:05:54 +00:00
7992202603
Add support for the new MEGA B series devices.
2011-10-31 03:39:12 +00:00
00ad509061
Add support for the Atmel XMEGA A3BU Xplained board.
...
More XMEGA USB core fixes.
2011-10-31 03:31:00 +00:00
0304916356
Fix XMEGA core USB driver so that device mode enumerates correctly on the host PC.
2011-10-31 02:26:21 +00:00
1e0c3bc69a
Namespace out the internal endpoint globals in the XMEGA architecture.
2011-10-30 14:05:34 +00:00
fe87b8a225
Update ENDPOINT_EPNUM_MASK to be 0x0F, the maximum possible USB endpoint number within a device, rather than just the maximum number for the AVR8 and UC3 targets of 0x07.
2011-10-30 14:04:47 +00:00
72717825e5
Namespace out the internal endpoint and pipe globals in the UC3 architecture.
2011-10-30 14:03:53 +00:00
b714ffbfa0
Update XMEGA clock management so that the correct 16-bit calibration is used when requested. Fix endpoint descriptor table so that the frame number is stored into the correct location. Add compile time option to source the USB clock from the PLL rather than the internal 32MHz RC oscillator.
2011-10-30 12:06:02 +00:00
ab43251bf9
Minor documentation fixes.
2011-10-30 07:09:44 +00:00
028a3c4ab3
XMEGA port improvements; connection and disconnection are now detected correctly. Fixed incorrect interrupt priority levels being set for XMEGA devices.
2011-10-30 07:09:20 +00:00
bc14c1a7f6
Update XMEGA platform clock management example code to suit the currently released silicon.
...
Cleanups to the UC3 endpoint/pipe multi byte read code.
2011-10-25 04:28:22 +00:00
c15eaa5dae
When automatic PLL management mode is enabled on the U4 series AVR8 chips, the PLL is now configured for 48MHz and not a divided 96MHz, to lower power consumption and to keep the system within the datasheet specs for 3.3V operation (thanks to Scott Vitale).
2011-10-12 02:27:22 +00:00
68e777e16b
Prevent written but unused variable warnings on GCC 4.6 with dummy reads.
2011-10-09 12:54:50 +00:00
a4d67bb6ff
USB XMEGA support improvements; add DFLL clock platform support, ensure the endpoint table is correctly aligned and configured in the USB controller.
2011-10-07 05:52:35 +00:00
6553bf5bfb
Fix incorrect function call name in USB_Host_SendControlRequest() for AVR8 devices.
2011-10-07 04:38:53 +00:00
Dean Camera