Fixed warning for including config_common.h

keyboards/handwired/trenctyl_manuform/6x6/6x6.c

@@ -0,0 +1 @@
+#include "6x6.h"

keyboards/handwired/trenctyl_manuform/6x6/6x6.h

@@ -0,0 +1,40 @@
+#pragma once
+
+#include "trenctyl_manuform.h"
+
+#if defined(KEYBOARD_handwired_trenctyl_manuform_6x6_f401)
+#    include "f401.h"
+#elif defined(KEYBOARD_handwired_trenctyl_manuform_6x6_f411)
+#    include "f411.h"
+#endif
+
+
+#define XXX KC_NO
+
+#define LAYOUT_6x6( \
+    L00, L01, L02, L03, L04, L05,                          R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15,                          R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25,                          R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35,                          R30, R31, R32, R33, R34, R35, \
+    L40, L41, L42, L43, L44, L45,                          R40, R41, R42, R43, R44, R45, \
+         L51, L52, L53,                                              R52, R53, \
+                        L54, L55,                          R50, R51, \
+                                  L64, L65,      R60, R61, \
+                                  L62, L63 \
+) { \
+    { L00, L01, L02, L03, L04, L05 }, \
+    { L10, L11, L12, L13, L14, L15 }, \
+    { L20, L21, L22, L23, L24, L25 }, \
+    { L30, L31, L32, L33, L34, L35 }, \
+    { L40, L41, L42, L43, L44, L45 }, \
+    { XXX, L51, L52, L53, L54, L55 }, \
+    { XXX, XXX, L62, L63, L64, L65 }, \
+\
+    { R00, R01, R02, R03, R04, R05 }, \
+    { R10, R11, R12, R13, R14, R15 }, \
+    { R20, R21, R22, R23, R24, R25 }, \
+    { R30, R31, R32, R33, R34, R35 }, \
+    { R40, R41, R42, R43, R44, R45 }, \
+    { R50, R51, R52, R53, XXX, XXX }, \
+    { R60, R61, XXX, XXX, XXX, XXX } \
+}

keyboards/handwired/trenctyl_manuform/6x6/config.h

@@ -0,0 +1,87 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 14
+#define MATRIX_COLS 6
+
+#define RGB_MATRIX_KEYPRESSES
+// #define RGB_MATRIX_KEYRELEASES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+
+#define SPLIT_TRANSPORT_MIRROR
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_OLED_ENABLE
+
+#define POINTING_DEVICE_INVERT_Y TRUE
+#define PMW3360_LIFTOFF_DISTANCE 0x03
+
+#define ONESHOT_TAP_TOGGLE 3
+
+#define OLED_TIMEOUT 0
+
+#define ENABLE_RGB_MATRIX_NONE
+#define ENABLE_RGB_MATRIX_SOLID_COLOR               // Static single hue, no speed support
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS               // Static dual hue, speed is hue for secondary hue
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN          // Static gradient top to bottom, speed controls how much gradient changes
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT       // Static gradient left to right, speed controls how much gradient changes
+#define ENABLE_RGB_MATRIX_BREATHING                 // Single hue brightness cycling animation
+#define ENABLE_RGB_MATRIX_BAND_SAT                  // Single hue band fading saturation scrolling left to right
+#define ENABLE_RGB_MATRIX_BAND_VAL                  // Single hue band fading brightness scrolling left to right
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT         // Single hue 3 blade spinning pinwheel fades saturation
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL         // Single hue 3 blade spinning pinwheel fades brightness
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT           // Single hue spinning spiral fades saturation
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL           // Single hue spinning spiral fades brightness
+#define ENABLE_RGB_MATRIX_CYCLE_ALL                 // Full keyboard solid hue cycling through full gradient
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT          // Full gradient scrolling left to right
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN             // Full gradient scrolling top to bottom
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN              // Full gradient scrolling out to in
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL         // Full dual gradients scrolling out to in
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON    // Full gradent Chevron shapped scrolling left to right
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL            // Full gradient spinning pinwheel around center of keyboard
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL              // Full gradient spinning spiral around center of keyboard
+#define ENABLE_RGB_MATRIX_DUAL_BEACON               // Full gradient spinning around center of keyboard
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON            // Full tighter gradient spinning around center of keyboard
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS         // Full dual gradients spinning two halfs of keyboard
+#define ENABLE_RGB_MATRIX_RAINDROPS                 // Randomly changes a single key's hue
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS       // Randomly changes a single key's hue and saturation
+#define ENABLE_RGB_MATRIX_HUE_BREATHING             // Hue shifts up a slight ammount at the same time then shifts back
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM              // Hue shifts up a slight ammount in a wave to the right then back to the left
+#define ENABLE_RGB_MATRIX_HUE_WAVE                  // Hue shifts up a slight ammount and then back down in a wave to the right
+#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL             // Single hue fractal filled keys pulsing horizontally out to edges
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN                // Randomly light keys with random hues
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP            // How hot is your WPM!
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN              // That famous computer simulation
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE     // Pulses keys hit to hue & value then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE            // Static single hue pulses keys hit to shifted hue then fades to current hue
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE       // Hue & value pulse near a single key hit then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE  // Hue & value pulse near multiple key hits then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS      // Hue & value pulse the same column and row of a single key hit then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS      // Hue & value pulse away on the same column and row of a single key hit then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out
+#define ENABLE_RGB_MATRIX_SPLASH                    // Full gradient & value pulse away from a single key hit then fades value out
+#define ENABLE_RGB_MATRIX_MULTISPLASH               // Full gradient & value pulse away from multiple key hits then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH              // Hue & value pulse away from a single key hit then fades value out
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH         // Hue & value pulse away from multiple key hits then fades value out
+#define ENABLE_RGB_MATRIX_EFFECT_MAX
+
+#define SPLIT_TRANSACTION_IDS_USER USER_SYNC_VIS_STATUS

keyboards/handwired/trenctyl_manuform/6x6/f01/config.h

@@ -0,0 +1,84 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define PRODUCT_ID 0x3836
+// #define DEVICE_VER 0x0001
+// #define PRODUCT Trenctyl Manuform(6x6) BlackPill F01
+
+#define MATRIX_ROW_PINS \
+    { A15, B13, B14, B15, A8, B6, B7 }
+#define MATRIX_COL_PINS \
+    { B10, B0, A1, A0, B4, C14 }
+
+#define MATRIX_ROW_PINS_RIGHT \
+    { A15, B13, B14, B15, A8, B6, B7 }
+#define MATRIX_COL_PINS_RIGHT \
+    { B10, B0, A1, A0, B4, C14 }
+
+#define DIODE_DIRECTION ROW2COL
+
+#define RGB_DI_PIN B3
+#define RGBLED_NUM 74
+#define DRIVER_LED_TOTAL 74
+#define RGB_MATRIX_LED_COUNT 74
+
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT \
+    { 38, 36 }
+#define RGBLIGHT_LIMIT_VAL 200
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
+#define RGB_MATRIX_SPLIT \
+    { 38, 36 }
+#define RGB_MATRIX_CENTER \
+    { 110, 19 }
+
+#define SERIAL_USART_RX_PIN A2
+#define SELECT_SOFT_SERIAL_SPEED 1
+#define FORCED_SYNC_THROTTLE_MS 200
+#define SERIAL_USART_DRIVER SD2
+#define SERIAL_USART_TX_PAL_MODE 7
+#define SERIAL_USART_RX_PAL_MODE 7
+#define SERIAL_USART_TIMEOUT 10
+#define I2C1_SCL_PIN B8
+#define I2C1_SDA_PIN B9
+
+#define PMW33XX_CS_PIN A4
+
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A5
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN A7
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN A6
+#define SPI_MISO_PAL_MODE 5
+
+#define ENCODERS_PAD_A \
+    { C13 }
+#define ENCODERS_PAD_B \
+    { C15 }
+
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+
+// hw rnd generator
+// #define ENC_HW_RND_STM32F4

keyboards/handwired/trenctyl_manuform/6x6/f01/f401.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "6x6.h"

keyboards/handwired/trenctyl_manuform/6x6/f01/halconf.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_I2C TRUE
+#define HAL_USE_SPI TRUE
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/trenctyl_manuform/6x6/f01/mcuconf.h

@@ -0,0 +1,33 @@
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef STM32_SERIAL_USE_USART2
+#define STM32_SERIAL_USE_USART2 TRUE
+
+#undef STM32_UART_USART2_RX_DMA_STREAM
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#undef STM32_UART_USART2_TX_DMA_STREAM
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SPI_SPI1_RX_DMA_STREAM
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#undef STM32_SPI_SPI1_TX_DMA_STREAM
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
+#undef STM32_ADC_USE_ADC0
+#define STM32_ADC_USE_ADC0 TRUE
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE

keyboards/handwired/trenctyl_manuform/6x6/f01/rules.mk

@@ -0,0 +1,6 @@
+MCU = STM32F401
+
+BOOTLOADER = stm32-dfu
+
+LTO_ENABLE = no
+SERIAL_DRIVER = usart

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/config.h

@@ -0,0 +1,84 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define PRODUCT_ID 0x3836
+// #define DEVICE_VER 0x0001
+// #define PRODUCT Trenctyl Manuform(6x6) BlackPill F01
+
+#define MATRIX_ROW_PINS \
+    { A15, B13, B14, B15, A8, B6, B7 }
+#define MATRIX_COL_PINS \
+    { B10, B0, A1, A0, B4, C14 }
+
+#define MATRIX_ROW_PINS_RIGHT \
+    { A15, B13, B14, B15, A8, B6, B7 }
+#define MATRIX_COL_PINS_RIGHT \
+    { B1, B0, A1, A0, B4, C14 }
+
+#define DIODE_DIRECTION ROW2COL
+
+#define RGB_DI_PIN B3
+#define RGBLED_NUM 74
+#define DRIVER_LED_TOTAL 74
+#define RGB_MATRIX_LED_COUNT 74
+
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT \
+    { 38, 36 }
+#define RGBLIGHT_LIMIT_VAL 200
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
+#define RGB_MATRIX_SPLIT \
+    { 38, 36 }
+#define RGB_MATRIX_CENTER \
+    { 110, 19 }
+
+#define SERIAL_USART_RX_PIN A2
+#define SELECT_SOFT_SERIAL_SPEED 1
+#define FORCED_SYNC_THROTTLE_MS 200
+#define SERIAL_USART_DRIVER SD2
+#define SERIAL_USART_TX_PAL_MODE 7
+#define SERIAL_USART_RX_PAL_MODE 7
+#define SERIAL_USART_TIMEOUT 10
+#define I2C1_SCL_PIN B8
+#define I2C1_SDA_PIN B9
+
+#define PMW33XX_CS_PIN A4
+
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A5
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN A7
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN A6
+#define SPI_MISO_PAL_MODE 5
+
+#define ENCODERS_PAD_A \
+    { C13 }
+#define ENCODERS_PAD_B \
+    { C15 }
+
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+
+// hw rnd generator
+// #define ENC_HW_RND_STM32F4

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/f401.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "6x6.h"

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/halconf.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_I2C TRUE
+#define HAL_USE_SPI TRUE
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/mcuconf.h

@@ -0,0 +1,33 @@
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef STM32_SERIAL_USE_USART2
+#define STM32_SERIAL_USE_USART2 TRUE
+
+#undef STM32_UART_USART2_RX_DMA_STREAM
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#undef STM32_UART_USART2_TX_DMA_STREAM
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SPI_SPI1_RX_DMA_STREAM
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#undef STM32_SPI_SPI1_TX_DMA_STREAM
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
+#undef STM32_ADC_USE_ADC0
+#define STM32_ADC_USE_ADC0 TRUE
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE

keyboards/handwired/trenctyl_manuform/6x6/f01uf2/rules.mk

@@ -0,0 +1,6 @@
+MCU = STM32F401
+
+BOOTLOADER = tinyuf2
+
+LTO_ENABLE = no
+SERIAL_DRIVER = usart

keyboards/handwired/trenctyl_manuform/6x6/info.json

@@ -0,0 +1,108 @@
+{
+    "keyboard_name": "Trenctyl Manuform(6x6) BlackPill F401",
+    "url": "",
+    "usb": {
+        "vid": "0x44FD",
+        "pid": "0x3836",
+        "device_version": "0.1.0"
+    },
+    "manufacturer": "mfulz",
+    "maintainer": "Matthias Fulz",
+    "layouts": {
+        "LAYOUT_6x6": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+                {"x": 5, "y": 0},
+
+                {"x": 11, "y": 0},
+                {"x": 12, "y": 0},
+                {"x": 13, "y": 0},
+                {"x": 14, "y": 0},
+                {"x": 15, "y": 0},
+                {"x": 16, "y": 0},
+
+                {"x": 0, "y": 1},
+                {"x": 1, "y": 1},
+                {"x": 2, "y": 1},
+                {"x": 3, "y": 1},
+                {"x": 4, "y": 1},
+                {"x": 5, "y": 1},
+
+                {"x": 11, "y": 1},
+                {"x": 12, "y": 1},
+                {"x": 13, "y": 1},
+                {"x": 14, "y": 1},
+                {"x": 15, "y": 1},
+                {"x": 16, "y": 1},
+
+                {"x": 0, "y": 2},
+                {"x": 1, "y": 2},
+                {"x": 2, "y": 2},
+                {"x": 3, "y": 2},
+                {"x": 4, "y": 2},
+                {"x": 5, "y": 2},
+
+                {"x": 11, "y": 2},
+                {"x": 12, "y": 2},
+                {"x": 13, "y": 2},
+                {"x": 14, "y": 2},
+                {"x": 15, "y": 2},
+                {"x": 16, "y": 2},
+
+                {"x": 0, "y": 3},
+                {"x": 1, "y": 3},
+                {"x": 2, "y": 3},
+                {"x": 3, "y": 3},
+                {"x": 4, "y": 3},
+                {"x": 5, "y": 3},
+
+                {"x": 11, "y": 3},
+                {"x": 12, "y": 3},
+                {"x": 13, "y": 3},
+                {"x": 14, "y": 3},
+                {"x": 15, "y": 3},
+                {"x": 16, "y": 3},
+
+                {"x": 0, "y": 4},
+                {"x": 1, "y": 4},
+                {"x": 2, "y": 4},
+                {"x": 3, "y": 4},
+                {"x": 4, "y": 4},
+                {"x": 5, "y": 4},
+
+                {"x": 11, "y": 4},
+                {"x": 12, "y": 4},
+                {"x": 13, "y": 4},
+                {"x": 14, "y": 4},
+                {"x": 15, "y": 4},
+                {"x": 16, "y": 4},
+
+                {"x": 1, "y": 5},
+                {"x": 2, "y": 5},
+                {"x": 3, "y": 5},
+
+                {"x": 13, "y": 5},
+                {"x": 14, "y": 5},
+
+                {"x": 4, "y": 6},
+                {"x": 5, "y": 6},
+
+                {"x": 11, "y": 6},
+                {"x": 12, "y": 6},
+
+                {"x": 6, "y": 7},
+                {"x": 7, "y": 7},
+
+                {"x": 9, "y": 7},
+                {"x": 10, "y": 7},
+
+                {"x": 6, "y": 8},
+                {"x": 7, "y": 8}
+            ]
+        }
+    }
+}

keyboards/handwired/trenctyl_manuform/6x6/keymaps/default/config.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define SERIAL_USART_FULL_DUPLEX
+
+//#define MASTER_LEFT
+#define MASTER_RIGHT
+
+//#define EE_HANDS

keyboards/handwired/trenctyl_manuform/6x6/keymaps/default/keymap.c

@@ -0,0 +1,580 @@
+#include QMK_KEYBOARD_H
+
+#include "pointing_device.h"
+
+#include "quantum_keycodes.h"
+#include "transactions.h"
+/*#include "enc.h"*/
+
+#define _QWERTZ 0
+#define _CONTROL 1
+#define _I3WM 2
+#define _MOUSE 3
+
+#define QWERTZ TO(_QWERTZ)
+#define CONTROL TT(_CONTROL)
+#define I3WM TT(_I3WM)
+#define MOUSE TG(_MOUSE)
+
+#ifdef RGB_MATRIX_ENABLE
+// clang-format off
+extern rgb_config_t rgb_matrix_config;
+
+led_config_t g_led_config = {{
+    {      0,      5,   10,     16,     22,     30,  },
+    {      1,      6,   11,     17,     23,     31,  },
+    {      2,      7,   12,     18,     24,     32,  },
+    {      3,      8,   13,     19,     25,     33,  },
+    {      4,      9,   14,     20,     26,     34,  },
+    { NO_LED, NO_LED,   15,     21,     27,     35,  },
+    { NO_LED, NO_LED,   29,     37,     28,     36,  },
+    // RIGHT HALF
+    {   38,     45,     52,     58,     64,     69 },
+    {   39,     46,     53,     59,     65,     70 },
+    {   40,     47,     54,     60,     66,     71 },
+    {   41,     48,     55,     61,     67,     72 },
+    {   42,     49,     56,     62,     68,     73 },
+    {   43,     50,     57,     63, NO_LED, NO_LED },
+    {   44,     51, NO_LED, NO_LED, NO_LED, NO_LED },
+}, {
+    {   0,  0 }, {   0,  8 }, {   0, 19 }, {   0, 30 }, {   0, 41 },
+    {  20,  0 }, {  20,  8 }, {  20, 19 }, {  20, 30 }, {  20, 41 },
+    {  40,  0 }, {  40,  8 }, {  40, 19 }, {  40, 30 }, {  40, 41 }, {  40, 52 },
+    {  60,  0 }, {  60,  8 }, {  60, 19 }, {  60, 30 }, {  60, 41 }, {  60, 52 },
+    {  80,  0 }, {  80,  8 }, {  80, 19 }, {  80, 30 }, {  80, 41 }, {  80, 52 }, {  80, 64 },
+    {  40, 64 },
+    { 100,  0 }, { 100,  8 }, { 100, 19 }, { 100, 30 }, { 100, 41 }, { 100, 52 }, { 100, 64 },
+    {  60, 64 },
+    // RIGHT HALF
+    { 120,  0 }, { 120,  8 }, { 120, 19 }, { 120, 30 }, { 120, 41 }, { 120, 52 }, { 120, 64 },
+    { 140,  0 }, { 140,  8 }, { 140, 19 }, { 140, 30 }, { 140, 41 }, { 140, 52 }, { 140, 64 },
+    { 160,  0 }, { 160,  8 }, { 160, 19 }, { 160, 30 }, { 160, 41 }, { 160, 52 },
+    { 180,  0 }, { 180,  8 }, { 180, 19 }, { 180, 30 }, { 180, 41 }, { 180, 52 },
+    { 200,  0 }, { 200,  8 }, { 200, 19 }, { 200, 30 }, { 200, 41 },
+    { 224,  0 }, { 224,  8 }, { 224, 19 }, { 224, 30 }, { 224, 41 }
+ }, {
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+          4, 4,
+                4, 4,
+                4, 4,
+                4, 4,
+    /*4, 4, 4, 4, 4, 4,*/
+    // RIGHT HALF
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4,
+          4, 4,
+    4, 4,
+    4, 4,
+    /*4, 4, 4, 4, 4, 4,*/
+}};
+#endif
+
+enum my_keycodes {
+    CPI_NEXT = SAFE_RANGE,
+    CPI_PREV,
+    VIS_VAD,
+    VIS_VAI
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTZ] = LAYOUT_6x6(
+        KC_F1  , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 ,                         KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,
+        KC_GRV , KC_1  , KC_2  , KC_3  , KC_4  , KC_5  ,                         KC_6  , KC_7  , KC_8  , KC_9  , KC_0  ,KC_BSPC,
+        KC_TAB , KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  ,                         KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_LBRC,
+        KC_LCTL, KC_A  , KC_S  , KC_D  , KC_F  , KC_G  ,                         KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_QUOT,
+        OSM(MOD_LSFT), KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  ,                   KC_N  , KC_M  ,KC_DOT,KC_COMM ,KC_SLSH,KC_BACKSLASH,
+                 KC_MUTE,KC_RBRC,KC_MINS,                                                       KC_NUBS, KC_EQL,
+                                         KC_LALT,KC_ENT,                        KC_SPC, KC_RALT,
+                                         KC_ESC,I3WM,                           KC_LGUI,MOUSE,
+                                         MOUSE,CONTROL
+    ),
+
+    [_CONTROL] = LAYOUT_6x6(
+        /*ENC_INIT,ENC_LOAD,ENC_CLOSE,ENC_KEY,_______,_______,                   ENC_REQ_ALLOW,ENC_REQ_DENY,_______,_______,_______,_______,*/
+        _______,_______,_______,_______,_______,_______,                     _______,_______,_______,_______,_______,_______,
+        _______,_______,_______,_______,_______,_______,                     _______,_______,_______,_______,_______,KC_DEL,
+        _______,_______,KC_PGDN,KC_UP,KC_PGUP,_______,                       _______,KC_7,KC_8,KC_9,_______,_______,
+        _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,                     KC_HOME,KC_4,KC_5,KC_6,KC_END,_______,
+        _______,_______,_______,_______,_______,_______,                     _______,KC_1,KC_2,KC_3,VIS_VAD,_______,
+                _______,VIS_VAI,_______,                                               KC_0,_______,
+                                                RGB_MOD,RGB_RMOD,           KC_ENT,RGB_VAI,
+                                                RGB_SPD,RGB_SPI,            RGB_VAD,RGB_TOG,
+                                                QWERTZ,_______
+    ),
+
+    [_I3WM] = LAYOUT_6x6(
+        _______,_______,_______,_______,_______,_______,                        _______,_______,_______,_______,_______,_______,
+        _______,LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),         LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0),_______,
+        _______,SGUI(KC_C),LGUI(KC_W),LGUI(KC_E),_______,_______,               LGUI(KC_Y),_______,LGUI(KC_I),_______,LGUI(KC_P),_______,
+        _______,LGUI(KC_ENT),LGUI(KC_S),LGUI(KC_D),_______,_______,             LGUI(KC_H),LGUI(KC_J),LGUI(KC_K),LGUI(KC_L),_______,_______,
+        _______,_______,_______,LGUI(KC_C),_______,_______,                     LAG(KC_N),_______,_______,_______,_______,_______,
+                _______,_______,_______,                                                       _______,_______,
+                                        _______,_______,                        LGUI(KC_ENT),_______,
+                                        _______,_______,                        _______,_______,
+                                        QWERTZ,_______
+    ),
+
+    [_MOUSE] = LAYOUT_6x6(
+        _______,_______,_______,_______,_______,_______,                       _______,_______,_______,_______,_______,_______,
+        _______,_______,_______,_______,_______,_______,                       _______,_______,_______,_______,_______,_______,
+        _______,_______,_______,_______,_______,_______,                       _______,_______,_______,_______,_______,_______,
+        _______,_______,KC_MS_BTN2,KC_MS_BTN3,KC_MS_BTN1,_______,                       _______,_______,_______,_______,_______,_______,
+        _______,_______,_______,_______,_______,_______,                       _______,KC_MS_BTN1,KC_MS_BTN3,KC_MS_BTN2,_______,_______,
+                _______,_______,_______,                                               KC_MS_WH_DOWN,KC_MS_WH_UP,
+                                                _______,_______,               KC_SPC,CPI_NEXT,
+                                                _______,_______,               CPI_PREV,QWERTZ,
+                                                _______,QWERTZ
+    ),
+
+};
+
+#ifdef OLED_ENABLE
+
+#include <stdio.h>
+
+int get_val_percent(void) {
+#ifdef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    uint8_t maxVal = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+#else
+    uint8_t maxVal = 255;
+#endif
+    uint8_t actVal = rgb_matrix_get_val();
+
+    float ret = ((float) 100)/((float) maxVal)*((float)actVal);
+
+    return ((int) ret);
+}
+
+int get_speed_percent(void) {
+    uint8_t maxVal = 255;
+    uint8_t actVal = rgb_matrix_get_speed();
+
+    float ret = ((float) 100)/((float) maxVal)*((float)actVal);
+
+    return ((int) ret);
+}
+
+#ifdef POINTING_DEVICE_ENABLE
+static uint16_t _cpi;
+#endif
+
+static uint16_t _vis_timeout_sec;
+static uint32_t _vis_timer;
+static bool _vis_status;
+
+#if defined(RGB_MATRIX_EFFECT)
+#    undef RGB_MATRIX_EFFECT
+#endif // defined(RGB_MATRIX_EFFECT)
+
+#define RGB_MATRIX_EFFECT(x) RGB_MATRIX_EFFECT_##x,
+enum {
+    RGB_MATRIX_EFFECT_NONE,
+#include "rgb_matrix_effects.inc"
+#undef RGB_MATRIX_EFFECT
+#ifdef RGB_MATRIX_CUSTOM_KB
+#    include "rgb_matrix_kb.inc"
+#endif
+#ifdef RGB_MATRIX_CUSTOM_USER
+#    include "rgb_matrix_user.inc"
+#endif
+};
+
+#define RGB_MATRIX_EFFECT(x)    \
+    case RGB_MATRIX_EFFECT_##x: \
+        return #x;
+const char* rgb_matrix_name(uint8_t effect) {
+    switch (effect) {
+        case RGB_MATRIX_EFFECT_NONE:
+            return "NONE";
+#include "rgb_matrix_effects.inc"
+#undef RGB_MATRIX_EFFECT
+#ifdef RGB_MATRIX_CUSTOM_KB
+#    include "rgb_matrix_kb.inc"
+#endif
+#ifdef RGB_MATRIX_CUSTOM_USER
+#    include "rgb_matrix_user.inc"
+#endif
+        default:
+            return "UNKNOWN";
+    }
+}
+
+void oled_write_rgb_matrix(void) {
+    /*char rgb_matrix_info_str[24] = {0};*/
+    oled_write("RGB: ", false);
+    /*switch (rgb_matrix_config.mode) {*/
+        /*case 1:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Solid Color");*/
+            /*break;*/
+        /*case 2:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Alphas Mods");*/
+            /*break;*/
+        /*case 3:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Gradient up down");*/
+            /*break;*/
+        /*case 4:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Gradient left right");*/
+            /*break;*/
+        /*case 5:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Breathing");*/
+            /*break;*/
+        /*case 6:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Sat");*/
+            /*break;*/
+        /*case 7:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Val");*/
+            /*break;*/
+        /*case 8:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Pinwheel Sat");*/
+            /*break;*/
+        /*case 9:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Pinwheel Val");*/
+            /*break;*/
+        /*case 10:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Spiral Sat");*/
+            /*break;*/
+        /*case 11:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Band Spiral Val");*/
+            /*break;*/
+        /*case 12:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle All");*/
+            /*break;*/
+        /*case 13:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle left right");*/
+            /*break;*/
+        /*case 14:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle up down");*/
+            /*break;*/
+        /*case 15:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle out in");*/
+            /*break;*/
+        /*case 16:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle out in dual");*/
+            /*break;*/
+        /*case 17:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Rainbow mov chevron");*/
+            /*break;*/
+        /*case 18:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle Pinwheel");*/
+            /*break;*/
+        /*case 19:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Cycle Spiral");*/
+            /*break;*/
+        /*case 20:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "Dual Beacon");*/
+            /*break;*/
+        /*default:*/
+            /*snprintf(rgb_matrix_info_str, sizeof(rgb_matrix_info_str), "%2d", rgb_matrix_config.mode);*/
+            /*break;*/
+    /*}*/
+    oled_write_ln(rgb_matrix_name(rgb_matrix_config.mode), false);
+}
+
+bool oled_task_user(void) {
+    // Host Keyboard Layer Status
+    if(is_keyboard_master()) {
+        uint32_t _oled_timeout = ((_vis_timeout_sec * 1000) - timer_elapsed32(_vis_timer)) / 1000;
+        if (!_vis_status) {
+            // turn displays off
+            oled_off();
+            return true;
+        }
+
+        oled_write_P(PSTR("L: "), false);
+
+        switch (get_highest_layer(layer_state)) {
+            case _QWERTZ:
+                oled_write_P(PSTR("Quertz\n"), false);
+                break;
+            case _CONTROL:
+                oled_write_P(PSTR("Control\n"), false);
+                break;
+            case _I3WM:
+                oled_write_P(PSTR("I3WM\n"), false);
+                break;
+            case _MOUSE:
+                oled_write_P(PSTR("MOUSE\n"), false);
+                break;
+            default:
+                oled_write_P(PSTR("Undefined\n"), false);
+        }
+
+        char brightness[100];
+        memset(brightness, 0x00, 100);
+        if (rgb_matrix_is_enabled()) {
+            snprintf(brightness, 100, "B: %d%% S: %d%%\n", get_val_percent(), get_speed_percent());
+        } else {
+            snprintf(brightness, 100, "B: OFF\n");
+        }
+        oled_write_P(PSTR(brightness), false);
+
+#ifdef POINTING_DEVICE_ENABLE
+        switch(_cpi) {
+            case 100:
+                oled_write_P(PSTR("M: >\n"), false);
+                break;
+            case 200:
+                oled_write_P(PSTR("M: >>\n"), false);
+                break;
+            case 400:
+                oled_write_P(PSTR("M: >>>\n"), false);
+                break;
+            case 500:
+                oled_write_P(PSTR("M: >>>>\n"), false);
+                break;
+            case 600:
+                oled_write_P(PSTR("M: >>>>>\n"), false);
+                break;
+        }
+#endif
+
+        oled_write_P(PSTR("V: "), false);
+        oled_write_P(get_u16_str(_oled_timeout, ' '), false);
+        oled_write_P(PSTR("s\n"), false);
+    } else {
+#ifdef ENC_ENABLE
+        enc_write_oled(false);
+#endif
+        oled_write_P(PSTR("L: "), false);
+
+        switch (get_highest_layer(layer_state)) {
+            case _QWERTZ:
+                oled_write_P(PSTR("Quertz\n"), false);
+                break;
+            case _CONTROL:
+                oled_write_P(PSTR("Control\n"), false);
+                break;
+            case _I3WM:
+                oled_write_P(PSTR("I3WM\n"), false);
+                break;
+            case _MOUSE:
+                oled_write_P(PSTR("MOUSE\n"), false);
+                break;
+            default:
+                oled_write_P(PSTR("Undefined\n"), false);
+        }
+
+        oled_write_rgb_matrix();
+    }
+
+    return true;
+}
+#endif
+
+
+#ifdef POINTING_DEVICE_ENABLE
+
+void pointing_device_init_user(void) {
+    _cpi = 400;
+
+    pointing_device_set_cpi(_cpi);
+}
+
+void _cpi_next(void) {
+    switch(_cpi) {
+        case 100:
+            _cpi = 200;
+            break;
+        case 200:
+            _cpi = 400;
+            break;
+        case 400:
+            _cpi = 500;
+            break;
+        case 500:
+            _cpi = 600;
+            break;
+        case 600:
+            _cpi = 100;
+            break;
+    }
+
+    pointing_device_set_cpi(_cpi);
+}
+
+void _cpi_prev(void) {
+    switch(_cpi) {
+        case 100:
+            _cpi = 600;
+            break;
+        case 200:
+            _cpi = 100;
+            break;
+        case 400:
+            _cpi = 200;
+            break;
+        case 500:
+            _cpi = 400;
+            break;
+        case 600:
+            _cpi = 500;
+            break;
+    }
+
+    pointing_device_set_cpi(_cpi);
+}
+
+report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
+    if (!layer_state_is(_MOUSE)) {
+        mouse_report.h = 0;
+        mouse_report.v = 0;
+        mouse_report.x = 0;
+        mouse_report.y = 0;
+    }
+    return mouse_report;
+}
+#endif
+
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    if (!_vis_status) {
+        return false;
+    }
+
+    HSV hsv = (HSV){0, 0, 0};
+    HSV hsv_alt = (HSV){0, 0, 0};
+    bool led_off = false;
+    bool led_alt = false;
+
+    switch(get_highest_layer(layer_state)) {  // special handling per layer
+        case _CONTROL:
+            hsv = (HSV){0, 255, 255};
+            break;
+        case _I3WM:
+            hsv = (HSV){85, 255, 255};
+            break;
+        case _MOUSE:
+            hsv = (HSV){170, 255, 255};
+            led_off = true;
+            break;
+        default:
+            return false;
+    }
+
+    hsv.v = rgb_matrix_get_val();
+    RGB rgb = hsv_to_rgb(hsv);
+    hsv_alt.v = rgb_matrix_get_val();
+    RGB rgb_alt = hsv_to_rgb(hsv_alt);
+
+    for (uint8_t row=0; row<MATRIX_ROWS; ++row) {
+        for (uint8_t col=0; col<MATRIX_COLS; ++col) {
+            uint8_t index = g_led_config.matrix_co[row][col];
+
+            if (index >= led_min && index <= led_max && index != NO_LED) {
+                if (keymap_key_to_keycode(get_highest_layer(layer_state), (keypos_t){col, row}) > KC_TRNS) {
+                    rgb_matrix_set_color(index, rgb.r, rgb.g, rgb.b);
+                } else {
+                    if (led_alt) {
+                        rgb_matrix_set_color(index, rgb_alt.r, rgb_alt.g, rgb_alt.b);
+                        continue;
+                    }
+                    if (led_off) {
+                        rgb_matrix_set_color(index, 0, 0, 0);
+                    }
+                }
+            }
+        }
+    }
+    return false;
+}
+
+typedef struct _vis_status {
+    bool m2s_data;
+} vis_status_t;
+
+void user_sync_vis_status_slave_handler(uint8_t in_buflen, const void* in_data, uint8_t out_buflen, void* out_data) {
+    const vis_status_t *m2s = (const vis_status_t*)in_data;
+    _vis_status = m2s->m2s_data;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (is_keyboard_master()) {
+        _vis_timer = timer_read32();
+    }
+
+    switch (keycode) {
+#ifdef POINTING_DEVICE_ENABLE
+        case CPI_PREV:
+            if (record->event.pressed) {
+                _cpi_prev();
+            }
+            return false;
+        case CPI_NEXT:
+            if (record->event.pressed) {
+                _cpi_next();
+            }
+            return false;
+#endif
+        case VIS_VAD:
+            if (record->event.pressed) {
+                _vis_timeout_sec -= 10;
+            }
+            return false;
+        case VIS_VAI:
+            if (record->event.pressed) {
+                _vis_timeout_sec += 10;
+            }
+            return false;
+        default:
+            return true;
+    }
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    switch(index) {
+        case 0:
+            if(clockwise) {
+                tap_code_delay(KC_VOLU, 10);
+            } else {
+                tap_code_delay(KC_VOLD, 10);
+            }
+            break;
+    }
+    return false;
+}
+
+void keyboard_pre_init_user(void) {
+    _vis_status = true;
+    _vis_timeout_sec = 600;
+    _vis_timer = timer_read32();
+#ifdef ENC_ENABLE
+    pre_init_enc();
+#endif
+}
+
+void eeconfig_init_user(void) {
+#ifdef ENC_ENABLE
+    eeconfig_init_enc();
+#endif
+}
+
+void keyboard_post_init_user(void) {
+    transaction_register_rpc(USER_SYNC_VIS_STATUS, user_sync_vis_status_slave_handler);
+}
+
+void housekeeping_task_user(void) {
+    if (is_keyboard_master()) {
+        if (timer_elapsed32(_vis_timer) >= (_vis_timeout_sec * 1000)) {
+            _vis_status = false;
+        } else {
+            _vis_status = true;
+        }
+        static uint32_t last_sync = 0;
+        if (timer_elapsed32(last_sync) > 500) {
+            vis_status_t m2s = {_vis_status};
+            if (transaction_rpc_send(USER_SYNC_VIS_STATUS, sizeof(m2s), &m2s)) {
+                last_sync = timer_read32();
+            }
+        }
+    }
+
+    if (!_vis_status) {
+        rgb_matrix_set_color_all(0, 0, 0);
+    }
+}

keyboards/handwired/trenctyl_manuform/6x6/rules.mk

@@ -0,0 +1,25 @@
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+SPLIT_KEYBOARD = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+WS2812_DRIVER = pwm
+VIA_ENABLE = yes
+RAW_ENABLE = yes
+OLED_ENABLE = yes
+
+POINTING_DEVICE_ENABLE = yes
+POINTING_DEVICE_DRIVER = pmw3360
+#DIP_SWITCH_ENABLE = yes
+ENCODER_ENABLE = yes

keyboards/handwired/trenctyl_manuform/config.h

@@ -0,0 +1,45 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+// #define VENDOR_ID 0x44FD
+// #define MANUFACTURER mfulz
+
+/* mouse config */
+// #define MOUSEKEY_INTERVAL    20
+// #define MOUSEKEY_DELAY       0
+// #define MOUSEKEY_TIME_TO_MAX 60
+// #define MOUSEKEY_MAX_SPEED   7
+// #define MOUSEKEY_WHEEL_DELAY 0
+#define MOUSEKEY_WHEEL_INTERVAL 120
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN A3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Enables This makes it easier for fast typists to use dual-function keys */
+#define PERMISSIVE_HOLD

keyboards/handwired/trenctyl_manuform/readme.md

@@ -0,0 +1,159 @@
+Dactyl Manuform (4x5, 5x6, 5x7, 6x6)
+======
+the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
+![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
+
+
+## First Time Setup
+
+Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
+
+Depending on your Layout chose one of the follwing commands:
+
+```
+$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME
+```
+
+example:
+```
+$ make handwired/dactyl_manuform/4x5:default
+```
+
+If everything worked correctly you will see a file:
+
+```
+dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex
+```
+
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
+
+
+## Keymaps
+
+### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
+
+#### Default
+Simple QWERTY layout with 3 Layers.
+#### Dvorak
+
+### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/)
+
+#### Default
+Just a copy of the Impstyle keymap. Feel free to adjust it.
+
+#### Impstyle
+A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
+
+### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/)
+#### Default
+Keymap of Loligagger from geekhack.
+
+### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
+
+#### Default
+Simple QWERTY layout with 3 Layers.
+
+## Required Hardware
+
+Apart from diodes and key switches for the keyboard matrix in each half, you
+will need:
+
+* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
+* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
+
+Alternatively, you can use any sort of cable and socket that has at least 3
+wires. If you want to use I2C to communicate between halves, you will need a
+cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
+
+## Optional Hardware
+A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
+
+## Wiring
+
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
+PD0 on the ATmega32u4) between the two Pro Micros.
+
+Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
+and modify the `matrix.c` accordingly.
+
+The wiring for serial:
+
+![serial wiring](https://i.imgur.com/C3D1GAQ.png)
+
+The wiring for i2c:
+
+![i2c wiring](https://i.imgur.com/Hbzhc6E.png)
+
+The pull-up resistors may be placed on either half. It is also possible
+to use 4 resistors and have the pull-ups in both halves, but this is
+unnecessary in simple use cases.
+
+You can change your configuration between serial and i2c by modifying your `config.h` file.
+
+## Notes on Software Configuration
+
+the keymaps in here are for the 4x5 layout of the keyboard only.
+
+## Flashing
+
+To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
+
+
+## Choosing which board to plug the USB cable into (choosing Master)
+
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+make handwired/dactyl_promicro:default:dfu-split-left
+make handwired/dactyl_promicro:default:dfu-split-right
+```
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.
+
+
+Notes on Using Pro Micro 3.3V
+-----------------------------
+
+Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
+the frequency on the 3.3V board.
+
+Also, if the slave board is producing weird characters in certain columns,
+update the following line in `matrix.c` to the following:
+
+```
+// wait_us(30);  // without this wait read unstable value.
+wait_us(300);  // without this wait read unstable value.
+```

keyboards/handwired/trenctyl_manuform/trenctyl_manuform.c

@@ -0,0 +1 @@
+#include "trenctyl_manuform.h"

keyboards/handwired/trenctyl_manuform/trenctyl_manuform.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#if defined(KEYBOARD_handwired_trenctyl_manuform_6x6)
+#    include "6x6.h"
+#endif
+
+#include "quantum.h"