[Keyboard] Add Mixi (#9364)

* [Keyboard] Add Mixi

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>

keyboards/mixi/config.h

@@ -0,0 +1,47 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4752
+#define PRODUCT_ID      0x4D49
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    gregorio
+#define PRODUCT         Mixi
+#define DESCRIPTION     Mixi macropad by gregorio
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+    { D1, D4, F4 }, \
+    { D0, B4, F5 }, \
+    { C6, F7, B6 } \
+}
+
+#define ENCODERS_PAD_A { F5 }
+#define ENCODERS_PAD_B { F4 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN B5
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYER_BLINK
+#endif

keyboards/mixi/info.json

@@ -0,0 +1,22 @@
+{
+    "keyboard_name": "Mixi",
+    "url": "https://tokopedia.com/sell-stuffs",
+    "maintainer": "ohchiko",
+    "width": 3,
+    "height": 3,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2}
+            ]
+        }
+    }
+}

keyboards/mixi/keymaps/default/keymap.c

@@ -0,0 +1,116 @@
+#include QMK_KEYBOARD_H
+
+// please change this value to the desired layer definitions
+#define LAYERNUM 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /*
+     * | Knob: Layer +/-                       |
+     * .---------------------------------------.
+     * | Mute     | Play/Pause | Hold: Layer 2 |
+     * |----------|------------|---------------|
+     * | Previous | Up         | Next          |
+     * |----------|------------|---------------|
+     * | Left     | Down       | Right         |
+     * '---------------------------------------'
+     */
+    [0] =
+        LAYOUT(
+                KC_MUTE,  KC_MPLY, MO(2), 
+                KC_MNXT,  KC_UP  , KC_MPRV     , 
+                KC_LEFT, KC_DOWN , KC_RGHT
+              ),
+
+    /*
+     * .-----------------------.
+     * | NUM 7 | NUM 8 | NUM 9 |
+     * |-------|-------|-------|
+     * | NUM 4 | NUM 5 | NUM 6 |
+     * |-------|-------|-------|
+     * | NUM 1 | NUM 2 | NUM 3 |
+     * '-----------------------'
+     */
+    [1] =
+        LAYOUT(
+                KC_P7, KC_P8, KC_P8,
+                KC_P4, KC_P5, KC_P6,
+                KC_P1, KC_P2, KC_P3
+              ),
+
+    /*
+     * | Knob: Volume +/-                     |
+     * .--------------------------------------.
+     * | N/A          | N/A   | Hold: Layer 2 |
+     * |--------------|-------|---------------|
+     * | RESET EEPROM | RESET | DEBUG MODE    |
+     * |--------------|-------|---------------|
+     * | N/A          | N/A   | N/A           |
+     * '--------------------------------------'
+     */
+    [2] =
+        LAYOUT(
+                KC_NO  , KC_NO, KC_TRNS, 
+                EEP_RST, RESET, DEBUG  , 
+                KC_NO  , KC_NO, KC_NO
+              )
+
+};
+
+const rgblight_segment_t PROGMEM _base_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+        {0, RGBLED_NUM, HSV_WHITE}
+        );
+const rgblight_segment_t PROGMEM _middle_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+        {0, RGBLED_NUM, HSV_GREEN}
+        );
+const rgblight_segment_t PROGMEM _top_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+        {0, RGBLED_NUM, HSV_RED}
+        );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+RGBLIGHT_LAYERS_LIST(
+        _base_layer,
+        _middle_layer,
+        _top_layer
+        );
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = _rgb_layers;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+
+    switch (get_highest_layer(state)) {
+        case 0:
+            rgblight_blink_layer(0, 500);
+            break;
+        case 1:
+            rgblight_blink_layer(1, 500);
+            break;
+        case 2:
+            rgblight_blink_layer(2, 500);
+            break;
+    }
+    return state;
+}
+
+uint8_t selected_layer = 0;
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (layer_state_is(2)) {
+            if (clockwise) {
+                tap_code(KC_VOLU);
+            } else {
+                tap_code(KC_VOLD);
+            }
+        } else {
+            if (clockwise && selected_layer < (LAYERNUM-2)) { /* Prevent switch to layer 2 using encoder */
+                selected_layer++;
+                layer_move(selected_layer);
+            } else if (!clockwise && selected_layer > 0) {
+                selected_layer--;
+                layer_move(selected_layer);
+            }
+        }
+    }
+}

keyboards/mixi/keymaps/default/readme.md

@@ -0,0 +1,10 @@
+![Mixi Layout Image](https://i.imgur.com/UIXj9O6.png)
+
+# Default Mixi Layout
+
+This is the default layout that comes flashed on every Mixi macropad. Layer 1
+and Layer 2 are accessible by rotating the encoder. Layer 3 is not accessible
+by the encoder, instead is accessible by holding the [0,2] key on Layer 1. While
+Layer 3 is active, rotating the encoder will results in increasing/decreasing
+media volume. This layout is expected the encoder is on the left side or [0,0]
+key.

keyboards/mixi/keymaps/via/keymap.c

@@ -0,0 +1,116 @@
+#include QMK_KEYBOARD_H
+
+// please change this value to the desired layer definitions
+#define LAYERNUM 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /*
+     * | Knob: Layer +/-                       |
+     * .---------------------------------------.
+     * | Mute     | Play/Pause | Hold: Layer 2 |
+     * |----------|------------|---------------|
+     * | Previous | Up         | Next          |
+     * |----------|------------|---------------|
+     * | Left     | Down       | Right         |
+     * '---------------------------------------'
+     */
+    [0] =
+        LAYOUT(
+                KC_MUTE,  KC_MPLY, MO(2), 
+                KC_MNXT,  KC_UP  , KC_MPRV     , 
+                KC_LEFT, KC_DOWN , KC_RGHT
+              ),
+
+    /*
+     * .-----------------------.
+     * | NUM 7 | NUM 8 | NUM 9 |
+     * |-------|-------|-------|
+     * | NUM 4 | NUM 5 | NUM 6 |
+     * |-------|-------|-------|
+     * | NUM 1 | NUM 2 | NUM 3 |
+     * '-----------------------'
+     */
+    [1] =
+        LAYOUT(
+                KC_P7, KC_P8, KC_P8,
+                KC_P4, KC_P5, KC_P6,
+                KC_P1, KC_P2, KC_P3
+              ),
+
+    /*
+     * | Knob: Volume +/-                     |
+     * .--------------------------------------.
+     * | N/A          | N/A   | Hold: Layer 2 |
+     * |--------------|-------|---------------|
+     * | RESET EEPROM | RESET | DEBUG MODE    |
+     * |--------------|-------|---------------|
+     * | N/A          | N/A   | N/A           |
+     * '--------------------------------------'
+     */
+    [2] =
+        LAYOUT(
+                KC_NO  , KC_NO, KC_TRNS, 
+                EEP_RST, RESET, DEBUG  , 
+                KC_NO  , KC_NO, KC_NO
+              )
+
+};
+
+const rgblight_segment_t PROGMEM _base_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+        {0, RGBLED_NUM, HSV_WHITE}
+        );
+const rgblight_segment_t PROGMEM _middle_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+        {0, RGBLED_NUM, HSV_GREEN}
+        );
+const rgblight_segment_t PROGMEM _top_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+        {0, RGBLED_NUM, HSV_RED}
+        );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+RGBLIGHT_LAYERS_LIST(
+        _base_layer,
+        _middle_layer,
+        _top_layer
+        );
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = _rgb_layers;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+
+    switch (get_highest_layer(state)) {
+        case 0:
+            rgblight_blink_layer(0, 500);
+            break;
+        case 1:
+            rgblight_blink_layer(1, 500);
+            break;
+        case 2:
+            rgblight_blink_layer(2, 500);
+            break;
+    }
+    return state;
+}
+
+uint8_t selected_layer = 0;
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (layer_state_is(2)) {
+            if (clockwise) {
+                tap_code(KC_VOLU);
+            } else {
+                tap_code(KC_VOLD);
+            }
+        } else {
+            if (clockwise && selected_layer < (LAYERNUM-2)) { /* Prevent switch to layer 2 using encoder */
+                selected_layer++;
+                layer_move(selected_layer);
+            } else if (!clockwise && selected_layer > 0) {
+                selected_layer--;
+                layer_move(selected_layer);
+            }
+        }
+    }
+}

keyboards/mixi/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/mixi/mixi.c

@@ -0,0 +1,13 @@
+#include "mixi.h"
+
+void eeconfig_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable(); // Enable RGB underglow by default
+#ifdef RGBLIGHT_ANIMATIONS
+    rgblight_mode(RGBLIGHT_MODE_TWINKLE + 5); // Set to RGB_TWINKLE animation by default
+#endif
+#endif
+
+    eeconfig_update_kb(0);
+    eeconfig_init_user();
+}

keyboards/mixi/mixi.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+        K00, K01, K02, \
+        K10, K11, K12, \
+        K20, K21, K22  \
+        ) { \
+    { K00,   K01,   K02 }, \
+    { K10,   K11,   K12 }, \
+    { K20,   K21,   K22 }  \
+}

keyboards/mixi/readme.md

@@ -0,0 +1,15 @@
+# Mixi
+
+![Mixi](https://i.imgur.com/GPO6Khu.jpg)
+
+A mini 3x3 macropad with rotary encoders support and RGB underglow and also tray mount support. Currently the PCB and kits can only be purchased in Indonesia.
+
+* Keyboard Maintainer: [ohchiko](https://github.com/ohchiko)
+* Hardware Supported: Mixi PCB, Arduino Pro Micro
+* Hardware Availability: [Tokopedia/Sell Stuffs](https://tokopedia.com/sell-stuffs) (Indonesia only).
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mixi:default
+
+    See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mixi/rules.mk

@@ -0,0 +1,27 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+AUDIO_ENABLE = no