diff --git a/keyboards/dekunukem/duckypad/chconf.h b/keyboards/dekunukem/duckypad/chconf.h
new file mode 100644
index 0000000000..85c1c9b3b9
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/chconf.h
@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     FALSE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    TRUE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           TRUE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/dekunukem/duckypad/config.h b/keyboards/dekunukem/duckypad/config.h
new file mode 100644
index 0000000000..27806ab83d
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/config.h
@@ -0,0 +1,61 @@
+/*
+
+QMK Firmware for dekuNukem/duckyPad
+
+Copyright (C) 2020 Max Bridgland <@M4cs>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0B91
+#define DEVICE_VER      0x0001
+#define MANUFACTURER dekuNukem
+#define PRODUCT duckyPad
+
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 17
+
+#define DIRECT_PINS {{ B13, B14, B15, A8, A15, B3, B4, B5, B6, B7, C13, C14, C15, F0, F1, A1, A2 }}
+
+#define RGB_DI_PIN A10
+#define RGBLED_NUM 15
+#define DRIVER_LED_TOTAL 15
+
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define RGB_MATRIX_STARTUP_HUE 221
+
+#define I2C1_SCL_BANK GPIOB
+#define I2C1_SCL 8
+#define I2C1_SDA_BANK GPIOB
+#define I2C1_SDA 9
+
+#define I2C1_SCL_PAL_MODE 1
+#define I2C1_SDA_PAL_MODE 1
+
+#define I2C1_OPMODE OPMODE_I2C
+#define I2C1_CLOCK_SPEED 100000
+#define I2C1_DUTY_CYCLE STD_DUTY_CYCLE
+
+#define OLED_DISPLAY_ADDRESS 0x3C
+#define OLED_DISPLAY_128X64
+#define OLED_COM_PINS 0x12
+
+#define OLED_IC OLED_IC_SH1106
+#define OLED_COLUMN_OFFSET 2
diff --git a/keyboards/dekunukem/duckypad/duckypad.c b/keyboards/dekunukem/duckypad/duckypad.c
new file mode 100644
index 0000000000..831a42a048
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/duckypad.c
@@ -0,0 +1,53 @@
+/*
+
+QMK Firmware for dekuNukem/duckyPad
+
+Copyright (C) 2020 Anthony Som
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "duckypad.h"
+
+led_config_t g_led_config = { {
+    { 2, 1, 0, 3, 4, 5, 8, 7, 6, 9, 10, 11, 14, 13, 12, NO_LED, NO_LED }
+}, {
+    {224, 0},
+    {112, 0},
+    {0, 0},
+    {0, 16},
+    {112, 16},
+    {224, 16},
+    {224, 32},
+    {112, 32},
+    {0, 32},
+    {0, 48},
+    {112, 48},
+    {224, 48},
+    {224, 64},
+    {112, 64},
+    {0, 64},
+}, {
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+} };
+
+void keyboard_pre_init_kb(void) {
+    setPinOutput(A0);
+    writePinHigh(A0);
+    writePinLow(A0);
+    wait_ms(10);
+    writePinHigh(A0);
+
+    keyboard_pre_init_user();
+}
diff --git a/keyboards/dekunukem/duckypad/duckypad.h b/keyboards/dekunukem/duckypad/duckypad.h
new file mode 100644
index 0000000000..abde7aac65
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/duckypad.h
@@ -0,0 +1,32 @@
+/*
+
+QMK Firmware for dekuNukem/duckyPad
+
+Copyright (C) 2020 Anthony Som
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k01, k02, \
+    k10, k11, k12, \
+    k20, k21, k22, \
+    k30, k31, k32, \
+    k40, k41, k42, \
+    kDown, kUp \
+) {{k00, k01, k02, k10, k11, k12, k20, k21, k22, k30, k31, k32, k40, k41, k42, kDown, kUp}}
diff --git a/keyboards/dekunukem/duckypad/halconf.h b/keyboards/dekunukem/duckypad/halconf.h
new file mode 100644
index 0000000000..d08e88460f
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/halconf.h
@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     TRUE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         TRUE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/dekunukem/duckypad/info.json b/keyboards/dekunukem/duckypad/info.json
new file mode 100644
index 0000000000..664e9314c9
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/info.json
@@ -0,0 +1,30 @@
+{
+    "keyboard_name": "duckyPad",
+    "url": "https://github.com/dekuNukem/",
+    "maintainer": "M4cs",
+    "width": 3,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 0, "y": 1},
+                {"x": 1, "y": 1},
+                {"x": 2, "y": 1},
+                {"x": 0, "y": 2},
+                {"x": 1, "y": 2},
+                {"x": 2, "y": 2},
+                {"x": 0, "y": 3},
+                {"x": 1, "y": 3},
+                {"x": 2, "y": 3},
+                {"x": 0, "y": 4},
+                {"x": 1, "y": 4},
+                {"x": 2, "y": 4},
+                {"x": 3, "y": 4},
+                {"x": 4, "y": 4}
+            ]
+        }
+    }
+}
diff --git a/keyboards/dekunukem/duckypad/keymaps/default/config.h b/keyboards/dekunukem/duckypad/keymaps/default/config.h
new file mode 100644
index 0000000000..9d26b71162
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/default/config.h
@@ -0,0 +1,59 @@
+/*
+
+Default Keymap Config for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+
+#define OLED_TIMEOUT 90000
+#define RGB_DISABLE_TIMEOUT 90000
+
+#define MT_0_0 "   1  "
+#define MT_0_1 "   2  "
+#define MT_0_2 "   3  "
+#define MT_0_3 "   4  "
+#define MT_0_4 "   5  "
+#define MT_0_5 "   6  "
+#define MT_0_6 "   7  "
+#define MT_0_7 "   8  "
+#define MT_0_8 "   9  "
+#define MT_0_9 "   .  "
+#define MT_0_10 "   0  "
+#define MT_0_11 "   =  "
+#define MT_0_12 "   -  "
+#define MT_0_13 "   +  "
+#define MT_0_14 " enter"
+
+#define MT_1_0 " stat "
+#define MT_1_1 " brth "
+#define MT_1_2 " rbow "
+#define MT_1_3 " swrl "
+#define MT_1_4 " spd- "
+#define MT_1_5 " spd+ "
+#define MT_1_6 " eff- "
+#define MT_1_7 " sat- "
+#define MT_1_8 " sat+ "
+#define MT_1_9 " eff+ "
+#define MT_1_10 " hue- "
+#define MT_1_11 " hue+ "
+#define MT_1_12 " powr "
+#define MT_1_13 " bri- "
+#define MT_1_14 " bri+ "
diff --git a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..3b30c42ff3
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c
@@ -0,0 +1,159 @@
+/*
+
+Default Keymap for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#include "stdio.h"
+#include <unistd.h>
+#include <string.h>
+
+#define LOGO_SIZE 384
+
+bool rgbToggled = false;
+
+enum layer_codes {
+  RGB_LAYER = SAFE_RANGE
+};
+
+enum my_keycodes {
+    Z0 = SAFE_RANGE, Z1, Z2,
+    Z3, Z4, Z5,
+    Z6, Z7, Z8,
+    Z9, Z10, Z11,
+    Z12, Z13, Z14
+};
+
+#define _DEFAULT 0
+#define _RGB 1
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /*
+  ,=========================================.
+  | Numpad 1    | Numpad 2    | Numpad 3    |
+  |=========================================|
+  | Numpad 4    | Numpad 5    | Numpad 6    |
+  |=========================================|
+  | Numpad 7    | Numpad 8    | Numpad 9    |
+  |=========================================|
+  | Numpad .    | Numpad 0    |  Numpad =   |
+  |=========================================| ,---------------------.
+  |  Numpad -   |  Numpad +   |  Numpad *   | | RGB Menu | Blank    |
+  `=========================================' `--------------------'
+  */
+  [_DEFAULT] = LAYOUT(
+      KC_P1, KC_P2, KC_P3,
+      KC_P4, KC_P5, KC_P6,
+      KC_P7, KC_P8, KC_P9,
+      KC_PDOT, KC_P0, KC_PENT,
+      KC_PMNS, KC_PPLS, KC_EQL,
+      RGB_LAYER, KC_NO
+  ),
+  /*
+  ,=========================================.
+  | Plain RGB   | Breathe RGB | Rainbow RGB |
+  |=========================================|
+  | Swirl RGB   | Speed Down  | Speed Up    |
+  |=========================================|
+  | Effect Up   | Sat. Down   | Sat. Up     |
+  |=========================================|
+  | Effect Down | Hue Down    | Hue Up      |
+  |=========================================| ,----------------------.
+  | Toggle RGB  | Brt. Down   | Brt. Up     | | Norm Menu | Blank    |
+  `=========================================' `---------------------'
+  */
+  [_RGB] = LAYOUT(
+      RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW,
+      RGB_MODE_SWIRL, RGB_SPD, RGB_SPI,
+      RGB_MOD, RGB_SAD, RGB_SAI,
+      RGB_RMOD, RGB_HUD, RGB_HUI,
+      RGB_TOG, RGB_VAD, RGB_VAI,
+      RGB_LAYER, KC_NO
+  )
+};
+
+static void render_logo(void) {
+   static const char PROGMEM ducky_logo[LOGO_SIZE] = {
+      0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0,
+      0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0,
+      0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0
+   };
+   oled_write_raw_P(ducky_logo, LOGO_SIZE);
+}
+
+char* make_menu_text(void){
+  char *s = malloc((30 * 6) * sizeof(*s));
+  int width = 3;
+  sprintf(s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+    width, MT_0_0, width, MT_0_1, width, MT_0_2,
+    width, MT_0_3, width, MT_0_4, width, MT_0_5,
+    width, MT_0_6, width, MT_0_7, width, MT_0_8,
+    width, MT_0_9, width, MT_0_10, width,MT_0_11,
+    width, MT_0_12, width, MT_0_13, width, MT_0_14
+  );
+  return s;
+};
+
+char* make_rgb_text(void){
+  char *s = malloc((30 * 6) * sizeof(*s));
+  int width = 3;
+  sprintf(
+    s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+    width, MT_1_0, width, MT_1_1, width, MT_1_2,
+    width, MT_1_3, width, MT_1_4, width, MT_1_5,
+    width, MT_1_6, width, MT_1_7, width, MT_1_8,
+    width, MT_1_9, width, MT_1_10, width,MT_1_11,
+    width, MT_1_12, width, MT_1_13, width, MT_1_14
+  );
+  return s;
+};
+
+void oled_task_user(void) {
+  render_logo();
+  oled_set_cursor(0,3);
+  if (rgbToggled) {
+    char *s = make_rgb_text();
+    oled_write_ln_P(s, false);
+    free(s);
+  } else {
+    char *s = make_menu_text();
+    oled_write_ln_P(s, false);
+    free(s);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case RGB_LAYER:
+      if (record->event.pressed) {
+        if (rgbToggled) {
+          rgbToggled = false;
+          layer_clear();
+        } else {
+          rgbToggled = true;
+          layer_on(_RGB);
+        }
+      }
+      return false;
+    default:
+      return true;
+  }
+  return false;
+}
diff --git a/keyboards/dekunukem/duckypad/keymaps/default/readme.md b/keyboards/dekunukem/duckypad/keymaps/default/readme.md
new file mode 100644
index 0000000000..0240cd573b
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/default/readme.md
@@ -0,0 +1,19 @@
+Default duckyPad Layout
+
+### Layers:
+
+0: Default Layer w/ Numpad Functionality
+
+1: RGB Menu that allows RGB customization
+
+### Configuration:
+
+To change the menu, edit the `MT_X_XX` values in `config.h`. The sytax is as follows: `MT_A_B`, where A equals the layer, and B equals the key from 0-14.
+
+### Need Help?
+
+Contact me on discord: macs#0420
+
+or join the duckyPad Discord and find me in there :)
+
+https://discord.gg/ADtrCjf
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h b/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h
new file mode 100644
index 0000000000..7d0bbb1341
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h
@@ -0,0 +1,75 @@
+/*
+
+M4cs Keymap for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+
+#define OLED_TIMEOUT 90000
+#define RGB_DISABLE_TIMEOUT 90000
+
+#define MT_0_0 " prev "
+#define MT_0_1 " pl/pa"
+#define MT_0_2 " next "
+#define MT_0_3 " volx "
+#define MT_0_4 " vol- "
+#define MT_0_5 " vol+ "
+#define MT_0_6 " spot "
+#define MT_0_7 " ffox "
+#define MT_0_8 " code "
+#define MT_0_9 " term "
+#define MT_0_10 " steam"
+#define MT_0_11 " dscd "
+#define MT_0_12 "      "
+#define MT_0_13 " micx "
+#define MT_0_14 "      "
+
+#define MT_1_0 " stat "
+#define MT_1_1 " brth "
+#define MT_1_2 " rbow "
+#define MT_1_3 " swrl "
+#define MT_1_4 " spd- "
+#define MT_1_5 " spd+ "
+#define MT_1_6 " eff- "
+#define MT_1_7 " sat- "
+#define MT_1_8 " sat+ "
+#define MT_1_9 " eff+ "
+#define MT_1_10 " hue- "
+#define MT_1_11 " hue+ "
+#define MT_1_12 " powr "
+#define MT_1_13 " bri- "
+#define MT_1_14 " bri+ "
+
+#define MT_2_0 "      "
+#define MT_2_1 "      "
+#define MT_2_2 "      "
+#define MT_2_3 " undo "
+#define MT_2_4 "  cut "
+#define MT_2_5 " copy "
+#define MT_2_6 " paste"
+#define MT_2_7 " find "
+#define MT_2_8 " pscr "
+#define MT_2_9 "      "
+#define MT_2_10 "      "
+#define MT_2_11 "      "
+#define MT_2_12 "      "
+#define MT_2_13 "      "
+#define MT_2_14 "      "
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c
new file mode 100644
index 0000000000..2ce15d7e77
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c
@@ -0,0 +1,236 @@
+/*
+
+M4cs Keymap for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#include "stdio.h"
+#include <unistd.h>
+#include <string.h>
+
+#define LOGO_SIZE 384
+
+bool rgbToggled = false;
+bool altToggled = false;
+
+enum layer_codes {
+  RGB_LAYER = SAFE_RANGE,
+  ALT_LAYER
+};
+
+enum my_keycodes {
+    Z0 = SAFE_RANGE, Z1, Z2,
+    Z3, Z4, Z5,
+    Z6, Z7, Z8,
+    Z9, Z10, Z11,
+    Z12, Z13, Z14
+};
+
+#define MAC_1 LCTL(LALT(KC_MINS))
+#define MAC_2 LCTL(LALT(KC_EQL))
+#define MAC_3 LCTL(LALT(KC_LBRC))
+#define MAC_4 LCTL(LALT(KC_RBRC))
+#define MAC_5 LCTL(LALT(KC_BSLS))
+#define MAC_6 LCTL(LALT(KC_SCLN))
+#define MAC_7 LCTL(LALT(KC_QUOT))
+#define MAC_8 LCTL(LALT(KC_COMM))
+#define MAC_9 LCTL(LALT(KC_SLSH))
+
+#define MAC_10 LCTL(LSFT(KC_MINS))
+#define MAC_11 LCTL(LSFT(KC_EQL))
+#define MAC_12 LCTL(LSFT(KC_SLSH))
+#define MAC_13 LCTL(LSFT(KC_LBRC))
+#define MAC_14 LCTL(LSFT(KC_RBRC))
+#define MAC_15 LCTL(LSFT(KC_BSLS))
+#define MAC_16 LCTL(LSFT(KC_SCLN))
+#define MAC_17 LCTL(LSFT(KC_QUOT))
+#define MAC_18 LCTL(LSFT(KC_COMM))
+
+#define _DEFAULT 0
+#define _RGB 1
+#define _ALT 2
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /*
+  ,=========================================.
+  | Media Prev. | Media Play  | Media Next  |
+  |=========================================|
+  | Mute Sound  | Volume Do.  | Volume Up   |
+  |=========================================|
+  | Macro 1     | Macro 2     | Macro 3     |
+  |=========================================|
+  | Macro 4     | Macro 5     | Macro 6     |
+  |=========================================| ,---------------------.
+  | Macro 7     | Macro 8     | Macro 9     | | RGB Menu | Alt Menu |
+  `=========================================' `--------------------'
+  */
+  [_DEFAULT] = LAYOUT(
+      KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK,
+      KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP,
+      MAC_1, MAC_2, MAC_3,
+      MAC_4, MAC_5, MAC_6,
+      MAC_7, MAC_8, MAC_9,
+      RGB_LAYER, ALT_LAYER
+  ),
+  /*
+  ,=========================================.
+  | Plain RGB   | Breathe RGB | Rainbow RGB |
+  |=========================================|
+  | Swirl RGB   | Speed Down  | Speed Up    |
+  |=========================================|
+  | Effect Up   | Sat. Down   | Sat. Up     |
+  |=========================================|
+  | Effect Down | Hue Down    | Hue Up      |
+  |=========================================| ,----------------------.
+  | Toggle RGB  | Brt. Down   | Brt. Up     | | Norm Menu | Alt Menu |
+  `=========================================' `---------------------'
+  */
+  [_RGB] = LAYOUT(
+      RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW,
+      RGB_MODE_SWIRL, RGB_SPD, RGB_SPI,
+      RGB_MOD, RGB_SAD, RGB_SAI,
+      RGB_RMOD, RGB_HUD, RGB_HUI,
+      RGB_TOG, RGB_VAD, RGB_VAI,
+      RGB_LAYER, ALT_LAYER
+  ),
+  /*
+  ,=========================================.
+  | Macro 10    | Macro 11    | Macro 12    |
+  |=========================================|
+  | Undo        | Cut         | Copy        |
+  |=========================================|
+  | Paste       | Find        | Prnt Scrn.  |
+  |=========================================|
+  | Macro 13    | Macro 14    | Macro 15    |
+  |=========================================| ,----------------------.
+  | Macro 16    | Macro 17    | Macro 18    | | Norm Menu | Alt Menu |
+  `=========================================' `---------------------'
+  */
+  [_ALT] = LAYOUT(
+      MAC_10, MAC_11, MAC_12,
+      KC_UNDO, KC_CUT, KC_COPY,
+      KC_PASTE, KC_FIND, KC_PSCR,
+      MAC_13, MAC_14, MAC_15,
+      MAC_16, MAC_17, MAC_18,
+      RGB_LAYER, ALT_LAYER
+  )
+};
+
+static void render_logo(void) {
+   static const char PROGMEM ducky_logo[LOGO_SIZE] = {
+      0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0,
+      0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0,
+      0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0
+   };
+   oled_write_raw_P(ducky_logo, LOGO_SIZE);
+}
+
+char* make_menu_text(void){
+  char *s = malloc((30 * 3) * sizeof(*s));
+  int width = 3;
+  sprintf(s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+    width, MT_0_0, width, MT_0_1, width, MT_0_2,
+    width, MT_0_3, width, MT_0_4, width, MT_0_5,
+    width, MT_0_6, width, MT_0_7, width, MT_0_8,
+    width, MT_0_9, width, MT_0_10, width,MT_0_11,
+    width, MT_0_12, width, MT_0_13, width, MT_0_14
+  );
+  return s;
+};
+
+char* make_rgb_text(void){
+  char *s = malloc((30 * 3) * sizeof(*s));
+  int width = 3;
+  sprintf(
+    s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+    width, MT_1_0, width, MT_1_1, width, MT_1_2,
+    width, MT_1_3, width, MT_1_4, width, MT_1_5,
+    width, MT_1_6, width, MT_1_7, width, MT_1_8,
+    width, MT_1_9, width, MT_1_10, width,MT_1_11,
+    width, MT_1_12, width, MT_1_13, width, MT_1_14
+  );
+  return s;
+};
+
+char* make_alt_text(void){
+  char *s = malloc((30 * 3) * sizeof(*s));
+  int width = 3;
+  sprintf(
+    s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+    width, MT_2_0, width, MT_2_1, width, MT_2_2,
+    width, MT_2_3, width, MT_2_4, width, MT_2_5,
+    width, MT_2_6, width, MT_2_7, width, MT_2_8,
+    width, MT_2_9, width, MT_2_10, width,MT_2_11,
+    width, MT_2_12, width, MT_2_13, width, MT_2_14
+  );
+  return s;
+};
+
+void oled_task_user(void) {
+  render_logo();
+  oled_set_cursor(0,3);
+  if (rgbToggled) {
+    char *s = make_rgb_text();
+    oled_write_ln_P(s, false);
+    free(s);
+  } else if (altToggled) {
+    char *s = make_alt_text();
+    oled_write_ln_P(s, false);
+    free(s);
+  } else {
+    char *s = make_menu_text();
+    oled_write_ln_P(s, false);
+    free(s);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case RGB_LAYER:
+      if (record->event.pressed) {
+        if (rgbToggled) {
+          rgbToggled = false;
+          altToggled = false;
+          layer_clear();
+        } else {
+          rgbToggled = true;
+          altToggled = false;
+          layer_on(_RGB);
+        }
+      }
+      return false;
+    case ALT_LAYER:
+      if (record->event.pressed) {
+        if (altToggled) {
+          rgbToggled = false;
+          altToggled = false;
+          layer_clear();
+        } else {
+          rgbToggled = false;
+          altToggled = true;
+          layer_on(_ALT);
+        }
+      }
+      return false;
+    default:
+      return true;
+  }
+  return false;
+}
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md b/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md
new file mode 100644
index 0000000000..42fae00440
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md
@@ -0,0 +1,25 @@
+[M4cs'](https://github.com/M4cs) duckyPad Layout
+
+### Layers:
+
+0: Default Layer w/ Media Functionality and Macros
+
+1: RGB Menu that allows RGB customization
+
+2: Alternate Macro Menu
+
+### Configuration:
+
+To change the menu, edit the `MT_X_XX` values in `config.h`. The sytax is as follows: `MT_A_B`, where A equals the layer, and B equals the key from 0-14.
+
+### Misc. Info:
+
+The macros currently just map to Ctrl + Alt + (Different Keys) right now. I have them launching certain shortcuts. I recommend you change these and add your shortcuts to match your shortcut manager.
+
+### Need Help?
+
+Contact me on discord: macs#0420
+
+or join the duckyPad Discord and find me in there :)
+
+https://discord.gg/ADtrCjf
\ No newline at end of file
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk b/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk
new file mode 100644
index 0000000000..8706546668
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk
@@ -0,0 +1,2 @@
+LTO_ENABLE = yes # Enable Link Time Optimization
+NO_USB_STARTUP_CHECK = yes # Disables usb suspend check after keyboard startup
diff --git a/keyboards/dekunukem/duckypad/mcuconf.h b/keyboards/dekunukem/duckypad/mcuconf.h
new file mode 100644
index 0000000000..201db101dc
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/mcuconf.h
@@ -0,0 +1,178 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/dekunukem/duckypad/readme.md b/keyboards/dekunukem/duckypad/readme.md
new file mode 100644
index 0000000000..581f52c899
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/readme.md
@@ -0,0 +1,16 @@
+# ![duckyPad](https://github.com/dekuNukem/duckyPad)
+
+A 15 Key Macropad w/ RGB and OLED
+
+* Keyboard Maintainer: [M4cs](https://github.com/M4cs) and [half-cambodian-hacker-man](https://github.com/half-cambodian-hacker-man)
+* Hardware Supported: All duckyPad Revisions
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dekunukem/duckypad:default
+
+Flashing example for this keyboard:
+
+    make dekunukem/duckypad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/dekunukem/duckypad/rules.mk b/keyboards/dekunukem/duckypad/rules.mk
new file mode 100644
index 0000000000..8251ab3646
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/rules.mk
@@ -0,0 +1,24 @@
+# MCU Name
+MCU = STM32F072
+
+# Build Options
+#  change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here:  https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+WS2812_DRIVER = bitbang
+RGB_MATRIX_ENABLE = WS2812
+
+OLED_DRIVER_ENABLE = yes