mirror of
https://github.com/mfulz/qmk_firmware.git
synced 2025-11-03 23:02:34 +01:00
Merge pull request #624 from Xyverz/master
Added Ergodox Layout with persistent layers, Atreus corrections
This commit is contained in:
Jack Humbert
GitHub
commit
8bb299255b
@ -2,11 +2,11 @@
|
|||||||
|
|
||||||
ifdef TEENSY2
|
ifdef TEENSY2
|
||||||
OPT_DEFS += -DATREUS_TEENSY2
|
OPT_DEFS += -DATREUS_TEENSY2
|
||||||
ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||||
else
|
else
|
||||||
OPT_DEFS += -DATREUS_ASTAR
|
OPT_DEFS += -DATREUS_ASTAR
|
||||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||||
ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||||
endif
|
endif
|
||||||
|
|
||||||
@ -84,5 +84,5 @@ endif
|
|||||||
USB ?= /dev/cu.usbmodem1411
|
USB ?= /dev/cu.usbmodem1411
|
||||||
|
|
||||||
upload: build
|
upload: build
|
||||||
$(ATRUES_UPLOAD_COMMAND)
|
$(ATREUS_UPLOAD_COMMAND)
|
||||||
|
|
||||||
@ -46,14 +46,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||||||
[_L1] = { /* LAYER 1 */
|
[_L1] = { /* LAYER 1 */
|
||||||
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 },
|
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 },
|
||||||
{KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
|
{KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
|
||||||
{KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
|
{KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
|
||||||
{KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
|
{KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
|
||||||
},
|
},
|
||||||
[_L2] = { /* LAYER 2 */
|
[_L2] = { /* LAYER 2 */
|
||||||
{KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
|
{KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
|
||||||
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 },
|
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS},
|
||||||
{KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 },
|
{KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 },
|
||||||
{KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET }
|
{KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|||||||
311
keyboards/ergodox/keymaps/xyverz/keymap.c
Normal file
311
keyboards/ergodox/keymaps/xyverz/keymap.c
Normal file
@ -0,0 +1,311 @@
|
|||||||
|
/*
|
||||||
|
* The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
|
||||||
|
* software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner
|
||||||
|
* keys. I've decided to continue using this layout with my ErgoDox.
|
||||||
|
*
|
||||||
|
* The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional
|
||||||
|
* keys as shown in the diagrams. The Colemak layout is merely an adaptation of that.
|
||||||
|
*
|
||||||
|
* I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck
|
||||||
|
* layouts.
|
||||||
|
*
|
||||||
|
* For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the
|
||||||
|
* keymap is defined, beginning on line 81.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "ergodox.h"
|
||||||
|
#include "debug.h"
|
||||||
|
#include "action_layer.h"
|
||||||
|
#include "eeconfig.h"
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
#define _DV 0 // Dvorak layer
|
||||||
|
#define _QW 1 // Qwerty layer
|
||||||
|
#define _CM 2 // Colemak layer
|
||||||
|
#define _MD 3 // Media Layer
|
||||||
|
#define _KP 4 // Keypad Layer
|
||||||
|
|
||||||
|
// Macro name shortcuts
|
||||||
|
#define DVORAK M(_DV)
|
||||||
|
#define QWERTY M(_QW)
|
||||||
|
#define COLEMAK M(_CM)
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
/* Keymap 0: Dvorak layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - |
|
||||||
|
* |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------|
|
||||||
|
* | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | LCtr | LAlt | | Ralt | RCtr |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | Home | | PgUp | | |
|
||||||
|
* | BkSp | Del |------| |------| Enter| Space|
|
||||||
|
* | | | End | | PgDn | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||||
|
// Otherwise, it needs KC_*
|
||||||
|
[_DV] = { // layer 0 : Dvorak
|
||||||
|
// left hand
|
||||||
|
{KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO },
|
||||||
|
{KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END },
|
||||||
|
{KC_2, KC_COMM, KC_O, KC_Q, KC_INS, KC_DEL },
|
||||||
|
{KC_3, KC_DOT, KC_E, KC_J, KC_LEFT, KC_BSPC},
|
||||||
|
{KC_4, KC_P, KC_U, KC_K, KC_RGHT, KC_HOME},
|
||||||
|
{KC_5, KC_Y, KC_I, KC_X, KC_NO, KC_LCTL},
|
||||||
|
{KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT},
|
||||||
|
|
||||||
|
// right hand
|
||||||
|
{KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT},
|
||||||
|
{KC_6, KC_F, KC_D, KC_B, KC_NO, KC_RCTL},
|
||||||
|
{KC_7, KC_G, KC_H, KC_M, KC_UP, KC_PGUP},
|
||||||
|
{KC_8, KC_C, KC_T, KC_W, KC_DOWN, KC_SPC },
|
||||||
|
{KC_9, KC_R, KC_N, KC_V, KC_SLSH, KC_ENT },
|
||||||
|
{KC_0, KC_L, KC_S, KC_Z, KC_EQL, KC_PGDN},
|
||||||
|
{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO }
|
||||||
|
},
|
||||||
|
|
||||||
|
/* Keymap 1: QWERTY layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' |
|
||||||
|
* |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------|
|
||||||
|
* | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | LCtr | LAlt | | Ralt | RCtr |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | Home | | PgUp | | |
|
||||||
|
* | BkSp | Del |------| |------| Enter| Space|
|
||||||
|
* | | | End | | PgDn | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*/
|
||||||
|
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||||
|
// Otherwise, it needs KC_*
|
||||||
|
[_QW] = { // layer 1 : QWERTY
|
||||||
|
// left hand
|
||||||
|
{KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO },
|
||||||
|
{KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END },
|
||||||
|
{KC_2, KC_W, KC_S, KC_X, KC_INS, KC_DEL },
|
||||||
|
{KC_3, KC_E, KC_D, KC_C, KC_LEFT, KC_BSPC},
|
||||||
|
{KC_4, KC_R, KC_F, KC_V, KC_RGHT, KC_HOME},
|
||||||
|
{KC_5, KC_T, KC_G, KC_B, KC_NO, KC_LCTL},
|
||||||
|
{KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT},
|
||||||
|
|
||||||
|
// right hand
|
||||||
|
{KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT},
|
||||||
|
{KC_6, KC_Y, KC_H, KC_N, KC_NO, KC_RCTL},
|
||||||
|
{KC_7, KC_U, KC_J, KC_M, KC_UP, KC_PGUP},
|
||||||
|
{KC_8, KC_I, KC_K, KC_COMM, KC_DOWN, KC_SPC },
|
||||||
|
{KC_9, KC_O, KC_L, KC_DOT, KC_LBRC, KC_ENT },
|
||||||
|
{KC_0, KC_P, KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
|
||||||
|
{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO }
|
||||||
|
},
|
||||||
|
|
||||||
|
/* Keymap 2: Colemak layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' |
|
||||||
|
* |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------|
|
||||||
|
* | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | LCtr | LAlt | | Ralt | RCtr |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | Home | | PgUp | | |
|
||||||
|
* | BkSp | Del |------| |------| Enter| Space|
|
||||||
|
* | | | End | | PgDn | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*/
|
||||||
|
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||||
|
// Otherwise, it needs KC_*
|
||||||
|
[_CM] = { // layer 2 : Colemak
|
||||||
|
// left hand
|
||||||
|
{KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, KC_NO },
|
||||||
|
{KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END },
|
||||||
|
{KC_2, KC_W, KC_R, KC_X, KC_INS, KC_DEL },
|
||||||
|
{KC_3, KC_F, KC_S, KC_C, KC_LEFT, KC_BSPC},
|
||||||
|
{KC_4, KC_P, KC_T, KC_V, KC_RGHT, KC_HOME},
|
||||||
|
{KC_5, KC_G, KC_D, KC_B, KC_NO, KC_LCTL},
|
||||||
|
{KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT},
|
||||||
|
|
||||||
|
// right hand
|
||||||
|
{KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT},
|
||||||
|
{KC_6, KC_J, KC_H, KC_K, KC_NO, KC_RCTL},
|
||||||
|
{KC_7, KC_L, KC_N, KC_M, KC_UP, KC_PGUP},
|
||||||
|
{KC_8, KC_U, KC_E, KC_COMM, KC_DOWN, KC_SPC },
|
||||||
|
{KC_9, KC_Y, KC_I, KC_DOT, KC_LBRC, KC_ENT },
|
||||||
|
{KC_0, KC_SCLN, KC_O, KC_SLSH, KC_RBRC, KC_PGDN},
|
||||||
|
{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO }
|
||||||
|
},
|
||||||
|
|
||||||
|
/* Keymap 3: Symbol Layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | | | PrSc | ScLk | Paus | | FN4 | | FN5 | | Mute | Vol- | Vol+ | | |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | |
|
||||||
|
* |--------+------+------+------+------+------| FN4 | | FN5 |------+------+------+------+------+--------|
|
||||||
|
* | | |Dvorak|Qwerty|Colemk| | | | | | | | | | |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | | | | | | | | | | | |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | | | | | |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | | | | | |
|
||||||
|
* | | |------| |------| | |
|
||||||
|
* | | | | | | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*/
|
||||||
|
// Media Layer
|
||||||
|
[_MD] = { // layer 3 : Media layer
|
||||||
|
// left hand
|
||||||
|
{RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO },
|
||||||
|
{KC_F1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F2, KC_PSCR, KC_TRNS, DVORAK, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F3, KC_SLCK, KC_TRNS, QWERTY, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F4, KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F5, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
{KC_F11, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
|
||||||
|
// right hand
|
||||||
|
{KC_F12, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
{KC_F6, KC_TRNS, KC_MSTP, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
{KC_F7, KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F8, KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F9, KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_F10, KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO }
|
||||||
|
},
|
||||||
|
|
||||||
|
/* Keymap 4: Keypad layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | Power | | | | | | | | | | NmLk | KP / | KP * | KP - | |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | Sleep | | | | | | FN5 | | FN4 | | KP 7 | KP 8 | KP 9 | KP + | |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | |
|
||||||
|
* |--------+------+------+------+------+------| FN5 | | FN4 |------+------+------+------+------+--------|
|
||||||
|
* | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | | | | | | | KP 0 | | KP . |KP Ent| |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | | | | | |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | | | | | |
|
||||||
|
* | | |------| |------| | |
|
||||||
|
* | | | | | | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*/
|
||||||
|
// Keypad Layer
|
||||||
|
[_KP] = { // layer 4 : Keypad layer
|
||||||
|
// left hand
|
||||||
|
{KC_PWR, KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO },
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
|
||||||
|
// right hand
|
||||||
|
{KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS},
|
||||||
|
{KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, KC_TRNS},
|
||||||
|
{KC_PSLS, KC_P8, KC_P5, KC_P2, KC_NO, KC_TRNS},
|
||||||
|
{KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, KC_TRNS},
|
||||||
|
{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS},
|
||||||
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO }
|
||||||
|
},
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
void persistant_default_layer_set(uint16_t default_layer) {
|
||||||
|
eeconfig_update_default_layer(default_layer);
|
||||||
|
default_layer_set(default_layer);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
switch(id) {
|
||||||
|
case _DV:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_DV);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _QW:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_QW);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _CM:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_CM);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
|
|
||||||
|
// Runs just one time when the keyboard initializes.
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
// Runs constantly in the background, in a loop.
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
ergodox_board_led_off();
|
||||||
|
ergodox_right_led_1_off();
|
||||||
|
ergodox_right_led_2_off();
|
||||||
|
ergodox_right_led_3_off();
|
||||||
|
switch (layer) {
|
||||||
|
// TODO: Make this relevant to the ErgoDox EZ.
|
||||||
|
case 1:
|
||||||
|
ergodox_right_led_1_on();
|
||||||
|
break;
|
||||||
|
case 2:
|
||||||
|
ergodox_right_led_2_on();
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
// none
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
};
|
||||||
104
keyboards/phantom/keymaps/xyverz/keymap.c
Normal file
104
keyboards/phantom/keymaps/xyverz/keymap.c
Normal file
@ -0,0 +1,104 @@
|
|||||||
|
#include "phantom.h"
|
||||||
|
#include "action_layer.h"
|
||||||
|
#include "eeconfig.h"
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
|
||||||
|
// Used for SHIFT_ESC
|
||||||
|
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _QW 0
|
||||||
|
#define _DV 1
|
||||||
|
#define _CM 2
|
||||||
|
#define _FL 3
|
||||||
|
|
||||||
|
// Macro name shortcuts
|
||||||
|
#define QWERTY M(_QW)
|
||||||
|
#define DVORAK M(_DV)
|
||||||
|
#define COLEMAK M(_CM)
|
||||||
|
|
||||||
|
// Fillers to make layering more clear
|
||||||
|
#define _______ KC_TRNS
|
||||||
|
#define XXXXXXX KC_NO
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
[_QW] = { /* Layer 0: Qwerty */
|
||||||
|
{KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS},
|
||||||
|
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP},
|
||||||
|
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN},
|
||||||
|
{KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||||
|
{KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX},
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
|
||||||
|
},
|
||||||
|
|
||||||
|
[_DV] = { /* Layer 1: Dvorak */
|
||||||
|
{KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS},
|
||||||
|
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP},
|
||||||
|
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL, KC_END, KC_PGDN},
|
||||||
|
{KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||||
|
{KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX},
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
|
||||||
|
},
|
||||||
|
|
||||||
|
[_CM] = { /* Layer 2: Colemak */
|
||||||
|
{KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS},
|
||||||
|
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP},
|
||||||
|
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN},
|
||||||
|
{KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||||
|
{KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX},
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
|
||||||
|
},
|
||||||
|
|
||||||
|
[_FL] = { /* Layer 3: Functions */
|
||||||
|
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
|
||||||
|
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET, KC_MPRV, KC_MPLY, KC_MNXT},
|
||||||
|
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU},
|
||||||
|
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||||
|
{_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX},
|
||||||
|
{QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______},
|
||||||
|
},
|
||||||
|
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
enum function_id {
|
||||||
|
SHIFT_ESC,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
void persistant_default_layer_set(uint16_t default_layer) {
|
||||||
|
eeconfig_update_default_layer(default_layer);
|
||||||
|
default_layer_set(default_layer);
|
||||||
|
}
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
switch(id) {
|
||||||
|
case _DV:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_DV);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _QW:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_QW);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _CM:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_CM);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
75
keyboards/tv44/Makefile
Normal file
75
keyboards/tv44/Makefile
Normal file
@ -0,0 +1,75 @@
|
|||||||
|
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
MIDI_ENABLE ?= no # MIDI controls
|
||||||
|
UNICODE_ENABLE ?= no # Unicode
|
||||||
|
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../Makefile
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
||||||
162
keyboards/tv44/config.h
Normal file
162
keyboards/tv44/config.h
Normal file
@ -0,0 +1,162 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEAE
|
||||||
|
#define PRODUCT_ID 0x8844
|
||||||
|
#define DEVICE_VER 0x0002
|
||||||
|
#define MANUFACTURER Evan Sailer
|
||||||
|
#define PRODUCT TheVan 44
|
||||||
|
#define DESCRIPTION keyboard firmware for TV44
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 4
|
||||||
|
#define MATRIX_COLS 12
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
|
||||||
|
#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP1 H
|
||||||
|
//#define MAGIC_KEY_HELP2 SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
||||||
21
keyboards/tv44/keymaps/default/Makefile
Normal file
21
keyboards/tv44/keymaps/default/Makefile
Normal file
@ -0,0 +1,21 @@
|
|||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../../../Makefile
|
||||||
|
endif
|
||||||
8
keyboards/tv44/keymaps/default/config.h
Normal file
8
keyboards/tv44/keymaps/default/config.h
Normal file
@ -0,0 +1,8 @@
|
|||||||
|
#ifndef CONFIG_USER_H
|
||||||
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
|
#include "../../config.h"
|
||||||
|
|
||||||
|
// place overrides here
|
||||||
|
|
||||||
|
#endif
|
||||||
97
keyboards/tv44/keymaps/default/keymap.c
Normal file
97
keyboards/tv44/keymaps/default/keymap.c
Normal file
@ -0,0 +1,97 @@
|
|||||||
|
#include "tv44.h"
|
||||||
|
#include "action_layer.h"
|
||||||
|
#include "eeconfig.h"
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
|
||||||
|
#define _QW 0
|
||||||
|
#define _DV 1
|
||||||
|
#define _CM 2
|
||||||
|
#define _L1 3
|
||||||
|
#define _L2 4
|
||||||
|
#define _L3 5
|
||||||
|
|
||||||
|
// Macro name shortcuts
|
||||||
|
#define QWERTY M(_QW)
|
||||||
|
#define DVORAK M(_DV)
|
||||||
|
#define COLEMAK M(_CM)
|
||||||
|
|
||||||
|
// Fillers to make layering more clear
|
||||||
|
#define _______ KC_TRNS
|
||||||
|
#define XXXXXXX KC_NO
|
||||||
|
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[_QW] = { /* Qwerty */
|
||||||
|
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
|
||||||
|
{MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) },
|
||||||
|
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) },
|
||||||
|
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
|
||||||
|
},
|
||||||
|
[_DV] = { /* Dvorak */
|
||||||
|
{KC_TAB, KC_COMM, KC_DOT, KC_SLSH, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_BSPC },
|
||||||
|
{MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1) },
|
||||||
|
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2) },
|
||||||
|
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
|
||||||
|
},
|
||||||
|
[_CM] = { /* Colemak */
|
||||||
|
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC },
|
||||||
|
{MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1) },
|
||||||
|
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) },
|
||||||
|
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
|
||||||
|
},
|
||||||
|
[_L1] = { /* LAYER 1 */
|
||||||
|
{KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL },
|
||||||
|
{_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ },
|
||||||
|
{_______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
|
||||||
|
{_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
|
||||||
|
},
|
||||||
|
[_L2] = { /* LAYER 2 */
|
||||||
|
{_______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______ },
|
||||||
|
{KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4, KC_5, KC_6, KC_VOLU, KC_ENT },
|
||||||
|
{_______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______ },
|
||||||
|
{_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
|
||||||
|
},
|
||||||
|
[_L3] = { /* LAYER 3 */
|
||||||
|
{_______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______ },
|
||||||
|
{KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______ },
|
||||||
|
{KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______ },
|
||||||
|
{_______, KC_LSFT, KC_B, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_C, _______, _______, XXXXXXX, _______ }
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
void persistant_default_layer_set(uint16_t default_layer) {
|
||||||
|
eeconfig_update_default_layer(default_layer);
|
||||||
|
default_layer_set(default_layer);
|
||||||
|
}
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
switch(id) {
|
||||||
|
case _DV:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_DV);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _QW:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_QW);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _CM:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_CM);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
1
keyboards/tv44/keymaps/default/readme.md
Normal file
1
keyboards/tv44/keymaps/default/readme.md
Normal file
@ -0,0 +1 @@
|
|||||||
|
# The default keymap for tv44
|
||||||
21
keyboards/tv44/keymaps/xyverz/Makefile
Normal file
21
keyboards/tv44/keymaps/xyverz/Makefile
Normal file
@ -0,0 +1,21 @@
|
|||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../../../Makefile
|
||||||
|
endif
|
||||||
8
keyboards/tv44/keymaps/xyverz/config.h
Normal file
8
keyboards/tv44/keymaps/xyverz/config.h
Normal file
@ -0,0 +1,8 @@
|
|||||||
|
#ifndef CONFIG_USER_H
|
||||||
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
|
#include "../../config.h"
|
||||||
|
|
||||||
|
// place overrides here
|
||||||
|
|
||||||
|
#endif
|
||||||
92
keyboards/tv44/keymaps/xyverz/keymap.c
Normal file
92
keyboards/tv44/keymaps/xyverz/keymap.c
Normal file
@ -0,0 +1,92 @@
|
|||||||
|
#include "tv44.h"
|
||||||
|
#include "action_layer.h"
|
||||||
|
#include "eeconfig.h"
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
#define _DV 0
|
||||||
|
#define _QW 1
|
||||||
|
#define _CM 2
|
||||||
|
#define _L1 3
|
||||||
|
#define _L2 4
|
||||||
|
|
||||||
|
// Macro name shortcuts
|
||||||
|
#define DVORAK M(_DV)
|
||||||
|
#define QWERTY M(_QW)
|
||||||
|
#define COLEMAK M(_CM)
|
||||||
|
|
||||||
|
// Fillers to make layering more clear
|
||||||
|
#define _______ KC_TRNS
|
||||||
|
#define XXXXXXX KC_NO
|
||||||
|
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[_DV] = { /* 0: Dvorak */
|
||||||
|
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC },
|
||||||
|
{MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT },
|
||||||
|
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
|
||||||
|
},
|
||||||
|
|
||||||
|
[_QW] = { /* 1: Qwerty */
|
||||||
|
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
|
||||||
|
{MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT },
|
||||||
|
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
|
||||||
|
},
|
||||||
|
|
||||||
|
[_CM] = { /* 2: Colemak */
|
||||||
|
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC },
|
||||||
|
{MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT },
|
||||||
|
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
|
||||||
|
},
|
||||||
|
|
||||||
|
[_L1] = {/* 1: FN 1 */
|
||||||
|
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL },
|
||||||
|
{_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ },
|
||||||
|
{_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
|
||||||
|
{KC_ESC, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
|
||||||
|
},
|
||||||
|
|
||||||
|
[_L2] = { /* 2: FN 2 */
|
||||||
|
{KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC },
|
||||||
|
{_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT },
|
||||||
|
{_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ },
|
||||||
|
{QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
|
||||||
|
}
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
void persistant_default_layer_set(uint16_t default_layer) {
|
||||||
|
eeconfig_update_default_layer(default_layer);
|
||||||
|
default_layer_set(default_layer);
|
||||||
|
}
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
switch(id) {
|
||||||
|
case _DV:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_DV);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _QW:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_QW);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case _CM:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
persistant_default_layer_set(1UL<<_CM);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
1
keyboards/tv44/keymaps/xyverz/readme.md
Normal file
1
keyboards/tv44/keymaps/xyverz/readme.md
Normal file
@ -0,0 +1 @@
|
|||||||
|
# The default keymap for tv44
|
||||||
28
keyboards/tv44/readme.md
Normal file
28
keyboards/tv44/readme.md
Normal file
@ -0,0 +1,28 @@
|
|||||||
|
tv44 keyboard firmware
|
||||||
|
======================
|
||||||
|
|
||||||
|
## Quantum MK Firmware
|
||||||
|
|
||||||
|
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
|
||||||
|
|
||||||
|
## Building
|
||||||
|
|
||||||
|
Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||||
|
|
||||||
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||||
|
|
||||||
|
### Default
|
||||||
|
|
||||||
|
To build with the default keymap, simply run `make`.
|
||||||
|
|
||||||
|
### Other Keymaps
|
||||||
|
|
||||||
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||||
|
|
||||||
|
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
|
||||||
|
|
||||||
|
```
|
||||||
|
$ make keymap=[default|jack|<name>]
|
||||||
|
```
|
||||||
|
|
||||||
|
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||||
28
keyboards/tv44/tv44.c
Normal file
28
keyboards/tv44/tv44.c
Normal file
@ -0,0 +1,28 @@
|
|||||||
|
#include "tv44.h"
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
22
keyboards/tv44/tv44.h
Normal file
22
keyboards/tv44/tv44.h
Normal file
@ -0,0 +1,22 @@
|
|||||||
|
#ifndef TV44_H
|
||||||
|
#define TV44_H
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
// This a shortcut to help you visually see your layout.
|
||||||
|
// The following is an example using the Planck MIT layout
|
||||||
|
// The first section contains all of the arguements
|
||||||
|
// The second converts the arguments into a two-dimensional array
|
||||||
|
#define KEYMAP( \
|
||||||
|
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
|
||||||
|
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
|
||||||
|
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
|
||||||
|
K30, K31, K32, K33, K37, K38, K39, K3B \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
|
||||||
|
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
|
||||||
|
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
|
||||||
|
{ K30, K31, K32, K33, KC_NO, KC_NO, KC_NO, K37, K38, K39, K3A, K3B } \
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
x
Reference in New Issue
Block a user