diff --git a/keyboards/dmqdesign/spin/config.h b/keyboards/dmqdesign/spin/config.h
new file mode 100644
index 0000000000..63a3aa94b8
--- /dev/null
+++ b/keyboards/dmqdesign/spin/config.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2019-2020 DMQ Design
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xA455
+#define PRODUCT_ID 0x0001 
+#define DEVICE_VER 0x0001
+#define MANUFACTURER DMQ Design
+#define PRODUCT  SPIN
+#define DESCRIPTION The SPIN Macro Pad is a 12 key Macro Pad by DMQ Design with 3 rotary encoders, inspired by the Plaid & RoMac.
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 5
+//Matrix is 3x5 instead of 3x4, as the 3 encoders are wired into the matrix
+
+#define MATRIX_ROW_PINS { F0, F1, F4 }
+#define MATRIX_COL_PINS { F5, F6, F7, C7, C6 }
+#define UNUSED_PINS { D5, D2, D1, D0, B7, B3, B2, B0, E6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+//rotary encoder setup
+#define ENCODERS_PAD_A { B6, B4, D6 }
+#define ENCODERS_PAD_B { B5, D7, D4 }
+#define ENCODER_RESOLUTION 4
+
+//Data pin for the 3 RGB LEDs
+#define RGB_DI_PIN D3
+//Number of RGB LEDs
+#define RGBLED_NUM 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/dmqdesign/spin/info.json b/keyboards/dmqdesign/spin/info.json
new file mode 100644
index 0000000000..032ff39908
--- /dev/null
+++ b/keyboards/dmqdesign/spin/info.json
@@ -0,0 +1,28 @@
+{
+    "keyboard_name": "SPIN", 
+    "url": "https://www.DMQdesign.com", 
+    "maintainer": "Quarren42", 
+    "width": 4.5, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+            {"x":0, "y":0},
+            {"x":1, "y":0},
+            {"x":2, "y":0},
+            {"x":3.5, "y":0},
+            {"x":0, "y":1},
+            {"x":1, "y":1}, 
+            {"x":2, "y":1},
+            {"x":3.5, "y":1.5},
+            {"x":0, "y":2},
+            {"x":1, "y":2},
+            {"x":2, "y":2},
+            {"x":3.5, "y":3},
+            {"x":0, "y":3}, 
+            {"x":1, "y":3},
+            {"x":2, "y":3}
+            ]
+        }
+    }
+}
diff --git a/keyboards/dmqdesign/spin/keymaps/default/config.h b/keyboards/dmqdesign/spin/keymaps/default/config.h
new file mode 100644
index 0000000000..a6d4ee4319
--- /dev/null
+++ b/keyboards/dmqdesign/spin/keymaps/default/config.h
@@ -0,0 +1,21 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define RGBLIGHT_HUE_STEP 8
+
+// place overrides here
diff --git a/keyboards/dmqdesign/spin/keymaps/default/keymap.c b/keyboards/dmqdesign/spin/keymaps/default/keymap.c
new file mode 100644
index 0000000000..0b5e6bd0b9
--- /dev/null
+++ b/keyboards/dmqdesign/spin/keymaps/default/keymap.c
@@ -0,0 +1,47 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(/* Base */
+                KC_7, KC_8, KC_9, KC_TRNS,
+                KC_4, KC_5, KC_6, KC_TRNS,
+                KC_1, KC_2, KC_3, KC_TRNS,
+                KC_0, RGB_TOG, KC_ENTER
+                ),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      rgblight_increase_hue(); //Cycle through the RGB hue
+    } else {
+      rgblight_decrease_hue();
+    }
+  } else if (index == 1) { /* Second encoder */  
+    if (clockwise) {
+      tap_code(KC_VOLU); //Example of using tap_code which lets you use keycodes outside of the keymap
+    } else {
+      tap_code(KC_VOLD);
+    }
+  } else if (index == 2) { /* Third encoder */  
+    if (clockwise) {
+      rgblight_increase_val(); //Change brightness on the RGB LEDs
+    } else {
+      rgblight_decrease_val();
+    }
+  }
+}
diff --git a/keyboards/dmqdesign/spin/keymaps/default/readme.md b/keyboards/dmqdesign/spin/keymaps/default/readme.md
new file mode 100644
index 0000000000..384b1a7d8a
--- /dev/null
+++ b/keyboards/dmqdesign/spin/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for the SPIN Macro Pad, it includes basic encoder & rgb functionality.
\ No newline at end of file
diff --git a/keyboards/dmqdesign/spin/keymaps/encoderlayers/config.h b/keyboards/dmqdesign/spin/keymaps/encoderlayers/config.h
new file mode 100644
index 0000000000..feedd68eb4
--- /dev/null
+++ b/keyboards/dmqdesign/spin/keymaps/encoderlayers/config.h
@@ -0,0 +1,23 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_HUE_STEP 8
+#define MIDI_ENABLE_STRICT 1
+#define MIDI_ADVANCED
+
diff --git a/keyboards/dmqdesign/spin/keymaps/encoderlayers/keymap.c b/keyboards/dmqdesign/spin/keymaps/encoderlayers/keymap.c
new file mode 100644
index 0000000000..cb2a21f557
--- /dev/null
+++ b/keyboards/dmqdesign/spin/keymaps/encoderlayers/keymap.c
@@ -0,0 +1,151 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "midi.h"
+#include "qmk_midi.h"
+
+enum layers
+{
+  _BL,
+  _FL,
+  _TL
+};
+
+uint8_t currentLayer;
+
+//The below layers are intentionally empty in order to give a good starting point for how to configure multiple layers.
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BL] = LAYOUT(/* Base */
+                KC_KP_7, KC_KP_8, KC_KP_9, TO(_BL),
+                KC_KP_4, KC_KP_5, KC_KP_6, TO(_FL),
+                KC_KP_1, KC_KP_2, KC_KP_3, TO(_TL),
+                KC_KP_0, RGB_TOG, RGB_MOD
+                ),
+
+    [_FL] = LAYOUT(/* Base */
+                KC_NO, KC_NO, KC_NO, KC_TRNS,
+                KC_NO, KC_NO, KC_NO, KC_TRNS,
+                KC_NO, KC_NO, KC_NO, KC_TRNS,
+                KC_MS_BTN1, KC_NO, KC_MS_BTN2
+                ),
+
+    [_TL] = LAYOUT(/* Base */
+                KC_NO, KC_NO, KC_NO, KC_TRNS,
+                KC_NO, KC_NO, KC_NO, KC_TRNS,
+                KC_NO, KC_NO, KC_NO, KC_TRNS,
+                KC_NO, KC_NO, KC_NO
+                )
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        switch (currentLayer) {     //break each encoder update into a switch statement for the current layer
+            case _BL:
+                if (clockwise) {
+                    rgblight_increase_hue();
+                } else {
+                    rgblight_decrease_hue();
+                }
+                break;
+            case _FL:
+                if (clockwise) {
+                    midi_send_cc(&midi_device, 0, 0x14, 1);
+                } else {
+                    midi_send_cc(&midi_device, 0, 0x15, 1);
+                }
+                break;
+            case _TL:
+                if (clockwise) {
+                    midi_send_cc(&midi_device, 0, 0x1A, 1);
+                } else {
+                    midi_send_cc(&midi_device, 0, 0x1B, 1);
+                }
+                break;
+        }
+    } else if (index == 1) { /* Second encoder */
+        switch (currentLayer) {
+            case _BL:
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+                }
+                break;
+            case _FL:
+                if (clockwise) {
+                    midi_send_cc(&midi_device, 0, 0x16, 1);
+                } else {
+                    midi_send_cc(&midi_device, 0, 0x17, 1);
+                }
+                break;
+            case _TL:
+                if (clockwise) {
+                    midi_send_cc(&midi_device, 0, 0x1C, 1);
+                } else {
+                    midi_send_cc(&midi_device, 0, 0x1D, 1);
+                }
+                break;
+        }
+    } else if (index == 2) { /* Third encoder */
+        switch (currentLayer) {
+            case _BL:
+                if (clockwise) {
+                    rgblight_increase_val();
+                } else {
+                    rgblight_decrease_val();
+                }
+                break;
+            case _FL:
+                if (clockwise) {
+                    midi_send_cc(&midi_device, 0, 0x18, 1);
+                } else {
+                    midi_send_cc(&midi_device, 0, 0x19, 1);
+                }
+                break;
+            case _TL:
+                if (clockwise) {
+                    midi_send_cc(&midi_device, 0, 0x1E, 1);
+                } else {
+                    midi_send_cc(&midi_device, 0, 0x1F, 1);
+                }
+                break;
+        }
+    }
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) { //This will run every time the layer is updated
+    currentLayer = get_highest_layer(state);
+
+    switch (currentLayer) {
+        case _BL:
+            setrgb(RGB_WHITE, &led[0]); //Set the top LED to white for the bottom layer
+            setrgb(0, 0, 0, &led[1]);
+            setrgb(0, 0, 0, &led[2]);
+            break;
+        case _FL:
+            setrgb(0, 0, 0, &led[0]); //Set the middle LED to white for the middle layer
+            setrgb(RGB_WHITE, &led[1]);
+            setrgb(0, 0, 0, &led[2]);
+            break;
+        case _TL:
+            setrgb(0, 0, 0, &led[0]);
+            setrgb(0, 0, 0, &led[1]);
+            setrgb(RGB_WHITE, &led[2]); //Set the bottom LED to white for the top layer
+            break;
+    }
+    rgblight_set();
+    return state;
+}
diff --git a/keyboards/dmqdesign/spin/keymaps/encoderlayers/readme.md b/keyboards/dmqdesign/spin/keymaps/encoderlayers/readme.md
new file mode 100644
index 0000000000..256fb16d47
--- /dev/null
+++ b/keyboards/dmqdesign/spin/keymaps/encoderlayers/readme.md
@@ -0,0 +1 @@
+# This keymap is intended to demonstrate how to implement different encoder functions dependent on layer, and on how to implement MIDI control with encoders.
\ No newline at end of file
diff --git a/keyboards/dmqdesign/spin/readme.md b/keyboards/dmqdesign/spin/readme.md
new file mode 100644
index 0000000000..8f856a81d9
--- /dev/null
+++ b/keyboards/dmqdesign/spin/readme.md
@@ -0,0 +1,17 @@
+# SPIN
+
+![SPIN](https://i.imgur.com/5oYg1WD.jpg)
+
+The SPIN Macro Pad is a USB-C, hotswappable Macro Pad with 3 encoders designed by Nick from DMQ Design.
+
+* Keyboard Maintainer: [Nicholas Junker](https://github.com/Quarren42)
+* Hardware Supported: SPIN Macro Pad PCB/kit
+* Hardware Availability: The macro pad is available at [DMQdesign.com](www.dmqdesign.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dmqdesign/spin:default
+
+I have two example keymaps available, both the default and the encoderlayers keymap which demonstrates using different encoder functions based on the layer chosen.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/dmqdesign/spin/rules.mk b/keyboards/dmqdesign/spin/rules.mk
new file mode 100644
index 0000000000..f8dc59afaa
--- /dev/null
+++ b/keyboards/dmqdesign/spin/rules.mk
@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = yes           # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+ENCODER_ENABLE = yes        # Enable rotary encoder support
diff --git a/keyboards/dmqdesign/spin/spin.c b/keyboards/dmqdesign/spin/spin.c
new file mode 100644
index 0000000000..fe3f267d1a
--- /dev/null
+++ b/keyboards/dmqdesign/spin/spin.c
@@ -0,0 +1,16 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "spin.h"
diff --git a/keyboards/dmqdesign/spin/spin.h b/keyboards/dmqdesign/spin/spin.h
new file mode 100644
index 0000000000..d60dbe82fb
--- /dev/null
+++ b/keyboards/dmqdesign/spin/spin.h
@@ -0,0 +1,29 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32 \
+) { \
+    {k00, k10, k20, k30, k23}, \
+    {k01, k11, k21, k31, k13}, \
+    {k02, k12, k22, k32, k03} \
+}