YMD96 complete QMK port (#3105)

* readded code for YMD96 full working

* added jj50 layout back

keyboards/ymd96/README.md

@@ -17,6 +17,8 @@ Keyboard maintainer: [Andrew](https://github.com/sparkyman215)
 Hardware Supported: YMD96 with the ATmega32a chip.  
 Hardware Availability: The GB was run June 2017, [in this thread](https://www.reddit.com/r/mechmarket/comments/6hu3yx/vendor_ymd96_gb_is_now_live_68_an_universal_and/). The vendor has stated that they plan on selling more rounds.
 
+A very big thanks to @krusli for making the RGB underglow, Backlight, CapsLock and NumLock LEDs working correctly.
+
 ## Finding your specific matrix
 
 This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB), also found on this qmk repo, to work with the YMD96 keyboard. However, I only have one board to test with, which might have a different layout than yours. To get qmk working with your specific layout, you'll need to follow these steps:  

keyboards/ymd96/backlight.c

@@ -0,0 +1,213 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT    (1 << 0)  // 0th pin of Port D (digital)
+#define CAPSLOCK_PORT   (1 << 1)  // 1st pin
+#define BACKLIGHT_PORT  (1 << 4)  // 4th pin
+//#define SCROLLLOCK_PORT (1 << 6)  // 6th pin
+
+#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+      // turn on
+      DDRD  |= NUMLOCK_PORT;
+      PORTD |= NUMLOCK_PORT;
+    } else {
+      // turn off
+      DDRD  &= ~NUMLOCK_PORT;
+      PORTD &= ~NUMLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+      DDRD  |= CAPSLOCK_PORT;
+      PORTD |= CAPSLOCK_PORT;
+    } else {
+      DDRD  &= ~CAPSLOCK_PORT;
+      PORTD &= ~CAPSLOCK_PORT;
+    }
+
+  /* YMD96 does not have scroll lock led  
+   if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+      DDRD  |= SCROLLLOCK_PORT;
+      PORTD |= SCROLLLOCK_PORT;
+    } else {
+      DDRD  &= ~SCROLLLOCK_PORT;
+      PORTD &= ~SCROLLLOCK_PORT;
+    }*/
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+  // default 8 bit mode
+  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+  // clear output compare value A
+  // outb(OCR1AH, 0);
+  // outb(OCR1AL, 0);
+
+  // clear output comparator registers for B
+	OCR1BH = 0; // outb(OCR1BH, 0);
+	OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+  // timer1SetPrescaler(TIMER1PRESCALE)
+  // set to DIV/64
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+  // reset TCNT1
+  TCNT1H = 0;  // outb(TCNT1H, 0);
+	TCNT1L = 0;  // outb(TCNT1L, 0);
+
+  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+  is_init = true;
+}
+
+void timer1UnInit(void) {
+  // set prescaler back to NONE
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
+
+  // disable timer overflow interrupt
+  TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+  setPWM(0);
+
+  is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+	// sei();
+  // handle breathing here
+  #ifdef BACKLIGHT_BREATHING
+  if (is_breathing()) {
+    custom_breathing_handler();
+  }
+  #endif
+
+  // TODO call user defined function
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+  // turn on channel B (OC1B) PWM output
+  // set OC1B as non-inverted PWM
+  TCCR1A |= _BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+  TCCR1A &= ~_BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+}
+
+void startPWM(void) {
+  timer1Init();
+  timer1PWMBEnable();
+  enableBacklight();
+}
+
+void stopPWM(void) {
+  timer1UnInit();
+  disableBacklight();
+  timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+  /* turn backlight on/off depending on user preference */
+  #if BACKLIGHT_ON_STATE == 0
+    // DDRx register: sets the direction of Port D
+    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+  #else
+    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+  #endif
+
+  timer1PWMSetup();
+  startPWM();
+
+  #ifdef BACKLIGHT_BREATHING
+  breathing_enable();
+  #endif
+}
+
+void b_led_set(uint8_t level) {
+  if (level > BACKLIGHT_LEVELS) {
+    level = BACKLIGHT_LEVELS;
+  }
+
+  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+  // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+  if (xValue > TIMER_TOP) {
+    xValue = TIMER_TOP;
+  }
+  OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif  // BACKLIGHT_ENABLE

keyboards/ymd96/backlight_custom.h

@@ -0,0 +1,15 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifndef BACKLIGHT_CUSTOM_H
+#define BACKLIGHT_CUSTOM_H
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+
+#endif  // BACKLIGHT_CUSTOM_H

keyboards/ymd96/breathing_custom.h

@@ -0,0 +1,140 @@
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+  return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+void breathing_enable(void) {
+  breathing = true;
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  // interrupt already registered
+}
+
+void breathing_pulse(void) {
+  if (get_backlight_level() == 0)
+    breathing_min();
+  else
+    breathing_max();
+  breathing_halt = BREATHING_HALT_ON;
+  // breathing_interrupt_enable();
+  breathing = true;
+}
+
+void breathing_disable(void) {
+  breathing = false;
+  // backlight_set(get_backlight_level());
+  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing())
+    breathing_disable();
+  else
+    breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      // breathing_interrupt_disable();
+  }
+
+  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif  // BACKLIGHT_ENABLE

keyboards/ymd96/config.h

@@ -1,7 +1,7 @@
 /*
 Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
 Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
-
+Modified 2018 Harshit Goel <Harshitgoel96@yahoo.com>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
@@ -16,6 +16,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
+#include "config_common.h"
+
 #ifndef CONFIG_H
 #define CONFIG_H
 
@@ -29,15 +31,29 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* matrix size */
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 15
-#define DIODE_DIRECTION ROW2COL
+//#define DIODE_DIRECTION ROW2COL
 
-#define RGB_DI_PIN C4
+//#define RGB_DI_PIN C4
-#define RGBLED_NUM 18
+/* COL2ROW or ROW2COL */
-#define RGBLIGHT_ANIMATIONS
+#define DIODE_DIRECTION COL2ROW
-#define RGBLIGHT_VAL_STEP 20
+
+#define BACKLIGHT_LEVELS 12
+// #define BACKLIGHT_BREATHING  // works, but BL_TOGG might not work
+
+#define TAPPING_TOGGLE 3
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
+
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 18
+#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
+#define RGBLIGHT_ANIMATIONS
+/*#define RGBLIGHT_VAL_STEP 20
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1*/
 
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/ymd96/keymaps/default/keymap.c

@@ -24,6 +24,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _DEFLT 0
 #define _RAISE 1
 
+#define KEYMAP KEYMAP_DEFAULT
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	
 	/* Layer 0, default layer

keyboards/ymd96/keymaps/hgoel89/config.h

@@ -0,0 +1,9 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
+#define TAPPING_TERM 300
+
+#endif

keyboards/ymd96/keymaps/hgoel89/keymap.c

@@ -0,0 +1,67 @@
+#include "ymd96.h"
+#include "action_layer.h"
+
+/*
+#define _QWERTY 0
+#define _LOWER  1
+#define _RAISE  2*/
+/*
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+};*/
+
+void matrix_scan_user(void) {
+  // runs at every matrix scan.
+}
+
+enum {
+  TD_H_E = 0
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_H_E] = ACTION_TAP_DANCE_DOUBLE(KC_HOME, KC_END)
+};
+#define ______ KC_TRNS
+#define _DEFLT 0
+#define _RAISE 1
+
+#define KEYMAP KEYMAP_CUSTOM
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	/* Layer 0, default layer
+	*  | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |Print | Home | End  |Insert|Delete| PgUp | 19 keys
+	*  |  ~`  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |    0 |    - |    = |    BkSpc    |NumLck|   /  |   *  | PgDn | 18 keys
+	*  |   Tab   |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |    P |    { |    } |     \    |  7   |   8  |   9  |   -  | 18 keys
+	*  |   Caps   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |    ; |   '  |     Return     |  4   |   5  |   6  |   +  | 17 keys
+	*  |    LShft     |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |       RShft       |  1   |   2  |   3  |  En  | 16 keys
+	*  | Ctrl  |  Win  |  Alt  |                  Space                      |  Fn  |  Win | Left | Down |  Up  | Right|   0  |   .  |      | 12 keys
+	*/
+	
+    [_DEFLT] = KEYMAP(
+			KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,       KC_F12,      KC_PSCR, KC_HOME,    KC_END,     KC_INSERT,   KC_DELETE,      KC_PGUP, \
+			KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,      KC_EQL,          KC_BSPC,         KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_PMNS, \
+			KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,      KC_RBRC,         KC_BSLS,         KC_P7,      KC_P8,       KC_P9,          KC_NO, \
+			KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,                       KC_ENT,          KC_P4,      KC_P5,       KC_P6,          KC_PPLS, \
+			KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,                               KC_RSFT,         KC_P1,      KC_P2,       KC_P3,          KC_PENT, \
+			KC_LCTL, KC_LGUI,KC_LALT,                              KC_SPC,                   KC_RGUI     ,          KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT, MO(_RAISE),     KC_P0,          KC_PDOT  \
+	),
+	/* Layer 1, raise layer
+	*  |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+	*  |      |      |      |      |      |      |      |      |      |      |      |      |      |             |      |      |      |      |
+	*  |         |      |rgb_up|rgb_dn|rgb_mo|      |      |      |      |      |  F22 |  F23  |  F24 |         |      |      |      |      |
+	*  |          |      |      |      |      |      |      |      |      |      |      |      |                |      |      |      |      |
+	*  |              |      |      |      |      |      |      |      | VolDn| VolUp| Mute |     Play/Pause    |      |      |      |      |
+	*  |       |       |       |                                             |      |      |MPrev |      |      | MNext|      |      |      |
+	*/ 
+	[_RAISE] = KEYMAP(
+			RESET,RGB_TOG,  BL_TOGG,  BL_STEP,    ______,  ______,  ______,  ______,  ______,  ______,  ______, ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
+			______,  BL_INC,  BL_DEC,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
+			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_F22,  KC_F23,  KC_F24,  ______,  ______,  ______,  ______,  ______, \
+			______,  RGB_HUI,  RGB_SAI,  RGB_VAI,  RGB_MODE_FORWARD	,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
+			______,  RGB_HUD,  RGB_SAD,  RGB_VAD,  ______,  ______,  ______,  ______,  KC_VOLD,KC_VOLU, KC_MUTE,      KC_MPLY,  ______,  ______,  ______,  ______, \
+		    ______,  ______,  BL_OFF,                              BL_ON,                        ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______  \
+	)
+};

keyboards/ymd96/keymaps/hgoel89/readme.md

@@ -0,0 +1,2 @@
+# Harshit
+Modified the layout according to me. Full 2u NumPad 0, 5 * 1u modifiers on right of space. Split right shift.

keyboards/ymd96/keymaps/hgoel89/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/ymd96/matrix.c

@@ -29,6 +29,9 @@ static uint8_t debouncing = DEBOUNCE;
 static matrix_row_t matrix[MATRIX_ROWS];
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
 void matrix_init(void) {
     // all outputs for rows high
     DDRB = 0xFF;
@@ -47,18 +50,20 @@ void matrix_init(void) {
         matrix[row] = 0x00;
         matrix_debouncing[row] = 0x00;
     }
-}
+/*}
 
+    matrix_init_quantum();  // missing from original port by Luiz
 void matrix_set_row_status(uint8_t row) {
     DDRB = (1 << row);
     PORTB = ~(1 << row);
-}
+}*/
 
-uint8_t bit_reverse(uint8_t x) {
+
+/*uint8_t bit_reverse(uint8_t x) {
     x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
     x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
     x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
-    return x;
+    return x;*/
 }
 
 uint8_t matrix_scan(void) {
@@ -93,11 +98,24 @@ uint8_t matrix_scan(void) {
         }
     }
 
-    matrix_scan_user();
+    matrix_scan_quantum();  // also missing in original PS2AVRGB implementation
 
     return 1;
 }
 
+// declarations
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
 inline matrix_row_t matrix_get_row(uint8_t row) {
     return matrix[row];
 }

keyboards/ymd96/rules.mk

@@ -28,23 +28,31 @@ F_CPU = 12000000
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = atmel-dfu
+BOOTLOADER = bootloadHID
 
 # build options
-BOOTMAGIC_ENABLE = yes
+BOOTMAGIC_ENABLE = no
-MOUSEKEY_ENABLE = yes
+MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
+CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = yes
+
 RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 
+KEY_LOCK_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c i2c.c backlight.c
 
 # programming options
-PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/ymd96/tools/README.md

@@ -0,0 +1,16 @@
+# JJ40 Tools
+
+## usb_detach.c
+
+When trying to flash on Linux, you may encounter a "Resource Unavailable" error. This means that Linux's HID driver has taken exclusive control of the keyboard, and the program script can't flash it.
+This program can force Linux to give up a device, so that the programming script can reset it.
+
+### To compile:
+```
+gcc usb_detach.c -o usb_detach
+```
+
+### To run:
+1. Use `lsusb` to discover the Bus and Device numbers for your keyboard.
+2. Run the program: `sudo ./usb_detach /dev/bus/usb/<BUS>/<DEVICE>`.
+3. Build and program the firmware as normal.

keyboards/ymd96/tools/usb_detach.c

@@ -0,0 +1,33 @@
+/* Found at https://www.linuxquestions.org/questions/linux-hardware-18/how-to-unclaim-usb-device-558138/#post3406986 */
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <linux/ioctl.h>
+#include <linux/usbdevice_fs.h>
+
+int main(int argc, char**argv)
+{
+        struct usbdevfs_ioctl command;
+        int ret;
+        int fd;
+        int i;
+        if (argc>1) {
+                fd = open(argv[1],O_RDWR);
+                if (fd<1){
+                        perror("unable to open file");
+                        return 1;
+                }
+                for (i=0;i<255;i++){ // hack: should fetch how many interface there is.
+                        command.ifno = i;
+                        command.ioctl_code = USBDEVFS_DISCONNECT;
+                        command.data = NULL;
+                        ret = ioctl(fd, USBDEVFS_IOCTL, &command);
+                        if(ret!=-1)
+                                printf("un claimed interface %d %d\n",i,ret);
+                }
+        } else {
+                printf ("usage: %s /dev/bus/usb/BUS/DEVICE\n",argv[0]);
+                printf("Release all interfaces of this usb device for usage in virtualisation\n");
+        }
+}

keyboards/ymd96/usbconfig.h

@@ -118,7 +118,8 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           500
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           100
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]

keyboards/ymd96/ymd96.c

@@ -1,5 +1,6 @@
 /*
 Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2018 Kenneth A. <github.com/krusli>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -16,19 +17,46 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "ymd96.h"
-#include "rgblight.h"
 
 #include <avr/pgmspace.h>
 
 #include "action_layer.h"
-#include "i2c.h"
 #include "quantum.h"
 
+#include "i2c.h"
+
+#include "backlight.h"
+#include "backlight_custom.h"
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  matrix_init_user();
+}
+
+#ifdef BACKLIGHT_ENABLE
+/// Overrides functions in `quantum.c`
+void backlight_init_ports(void) {
+  b_led_init_ports();
+}
+
+void backlight_task(void) {
+  b_led_task();
+}
+
+void backlight_set(uint8_t level) {
+  b_led_set(level);
+}
+#endif
+
+#ifdef RGBLIGHT_ENABLE
 extern rgblight_config_t rgblight_config;
 
+// custom RGB driver
 void rgblight_set(void) {
   if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
       led[i].r = 0;
       led[i].g = 0;
       led[i].b = 0;
@@ -39,7 +67,31 @@ void rgblight_set(void) {
   i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
 }
 
-__attribute__ ((weak))
+bool rgb_init = false;
-void matrix_scan_user(void) {
+
+void matrix_scan_kb(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
   rgblight_task();
+#else
+void matrix_scan_kb(void) {
+#endif
+  matrix_scan_user();
+  /* Nothing else for now. */
+}
+
+__attribute__((weak)) // overridable
+void matrix_init_user(void) {
+
+}
+
+
+__attribute__((weak)) // overridable
+void matrix_scan_user(void) {
+
 }

keyboards/ymd96/ymd96.h

@@ -1,7 +1,7 @@
 /*
 Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
 Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
-
+Modified 2018 harshit goel
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
@@ -19,11 +19,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef KEYMAP_COMMON_H
 #define KEYMAP_COMMON_H
 
+#include "quantum.h"
 #include "quantum_keycodes.h"
 #include "keycode.h"
 #include "action.h"
 
-#define KEYMAP( \
+void matrix_init_user(void);  // TODO port this to other PS2AVRGB boards
+
+#define KEYMAP_DEFAULT( \
 	K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
 	K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412,       K414, K406, K407, K408, K409, \
     K300,   K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312,     K313, K306, K307, K308, K309, \
@@ -41,6 +44,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 	{      K700,       K701,       K702,       K703,       K704,       K705,       K706,       KC_NO,      K708,       K709,       K710,       K711,       K712,       K713,      K714  } \
 }
 
+#define KEYMAP_CUSTOM( \
+	K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
+	K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412,       K414, K406, K407, K408, K409, \
+    K300,   K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312,     K313, K306, K307, K308, K309, \
+	K200,    K201, K202, K203, K204, K205, K603, K613, K713, K703, K210, K211,          K213, K206, K207, K208, K209, \
+	K100,      K101, K102, K103, K104, K105, K604, K614, K714, K704, K110,              K111, K106, K107, K108, K009, \
+	K000,   K001,   K002,                    K605,                    K705, K010, K011, K606, K607, KC_NO, K006, K008  \
+) { \
+	{      K000,       K001,       K002,       KC_NO,      KC_NO,      KC_NO,      K006,       KC_NO,      K008,       K009,       K010,       K011,       KC_NO,      K013,      KC_NO, }, \
+	{      K100,       K101,       K102,       K103,       K104,       K105,       K106,       K107,       K108,       KC_NO,      K110,       K111,       KC_NO,      K113,      KC_NO, }, \
+	{      K200,       K201,       K202,       K203,       K204,       K205,       K206,       K207,       K208,       K209,       K210,       K211,       KC_NO,      K213,      K214, }, \
+	{      K300,       K301,       K302,       K303,       K304,       K305,       K306,       K307,       K308,       K309,       K310,       K311,       K312,       K313,      KC_NO, }, \
+	{      K400,       K401,       K402,       K403,       K404,       K405,       K406,       K407,       K408,       K409,       K410,       K411,       K412,       KC_NO,     K414, }, \
+	{      K500,       KC_NO,      K502,       K503,       K504,       K505,       KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_NO,      K511,       K512,       K513,      K514, }, \
+	{      K600,       K601,       K602,       K603,       K604,       K605,       K606,       K607,       KC_NO,      KC_NO,       K610,       K611,       K612,       K613,      K614, }, \
+	{      K700,       K701,       K702,       K703,       K704,       K705,       K706,       KC_NO,      K708,       K709,       K710,       K711,       K712,       K713,      K714  } \
+}
+
 #define LAYOUT_jj50( \
 K011, K010, K009, K008, K004, K005, K006, K007, K003, K002, K201, K000, \
 K111, K110, K109, K108, K104, K105, K106, K107, K103, K102, K001, K100, \
@@ -57,12 +78,3 @@ K411, K410, K409, K408, K404, K405, K406, K407, K403, K402, K401, K400  \
 
 
 #endif
-
-
-
-
-
-
-
-
-