mfulz_github/qmk_firmware
1
0
Fork 1
mirror of https://github.com/mfulz/qmk_firmware.git synced 2025-10-31 05:12:33 +01:00
Code Issues Projects Releases Wiki Activity

Rename PDITarget.c/.h to XPROGTarget.c/.h so that both PDI and TPI programming can be included in the one set of files.

Browse Source
This commit is contained in:
Dean Camera 2009-12-24 02:29:01 +00:00
parent 18b0d408a9
commit cfdab42dcf
4 changed files with 0 additions and 438 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

338
Projects/AVRISP/Lib/XPROG/TPITarget.c
View File

@ -1,338 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Target-related functions for the TPI Protocol decoder.
*/
#define INCLUDE_FROM_TPITARGET_C
#include "TPITarget.h"
#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
/** Flag to indicate if the USART is currently in Tx or Rx mode. */
volatile bool IsSending;
#if !defined(XPROG_VIA_HARDWARE_USART)
/** Software USART raw frame bits for transmission/reception. */
volatile uint16_t SoftUSART_Data;
/** Bits remaining to be sent or received via the software USART - set as a GPIOR for speed. */
#define SoftUSART_BitCount GPIOR2
/** ISR to manage the software USART when bit-banged USART mode is selected. */
ISR(TIMER1_CAPT_vect, ISR_BLOCK)
{
/* Toggle CLOCK pin in a single cycle (see AVR datasheet) */
BITBANG_TPICLOCK_PIN |= BITBANG_TPICLOCK_MASK;
/* If not sending or receiving, just exit */
if (!(SoftUSART_BitCount))
return;
/* Check to see if we are at a rising or falling edge of the clock */
if (BITBANG_TPICLOCK_PORT & BITBANG_TPICLOCK_MASK)
{
/* If at rising clock edge and we are in send mode, abort */
if (IsSending)
return;
/* Wait for the start bit when receiving */
if ((SoftUSART_BitCount == BITS_IN_TPI_FRAME) && (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK))
return;
/* Shift in the bit one less than the frame size in position, so that the start bit will eventually
* be discarded leaving the data to be byte-aligned for quick access */
if (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK)
SoftUSART_Data |= (1 << (BITS_IN_TPI_FRAME - 1));
SoftUSART_Data >>= 1;
SoftUSART_BitCount--;
}
else
{
/* If at falling clock edge and we are in receive mode, abort */
if (!IsSending)
return;
/* Set the data line to the next bit value */
if (SoftUSART_Data & 0x01)
BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
else
BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
SoftUSART_Data >>= 1;
SoftUSART_BitCount--;
}
}
#endif
/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
void TPITarget_EnableTargetTPI(void)
{
/* Set /RESET line low for at least 90ns to enable TPI functionality */
RESET_LINE_DDR |= RESET_LINE_MASK;
RESET_LINE_PORT &= ~RESET_LINE_MASK;
asm volatile ("NOP"::);
asm volatile ("NOP"::);
#if defined(XPROG_VIA_HARDWARE_USART)
/* Set Tx and XCK as outputs, Rx as input */
DDRD |= (1 << 5) | (1 << 3);
DDRD &= ~(1 << 2);
/* Set up the synchronous USART for XMEGA communications -
8 data bits, even parity, 2 stop bits */
UBRR1 = (F_CPU / 1000000UL);
UCSR1B = (1 << TXEN1);
UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
/* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
TPITarget_SendBreak();
TPITarget_SendBreak();
#else
/* Set DATA and CLOCK lines to outputs */
BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
BITBANG_TPICLOCK_DDR |= BITBANG_TPICLOCK_MASK;
/* Set DATA line high for idle state */
BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
/* Fire timer capture ISR every 100 cycles to manage the software USART */
OCR1A = 80;
TCCR1B = (1 << WGM13) | (1 << WGM12) | (1 << CS10);
TIMSK1 = (1 << ICIE1);
/* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
TPITarget_SendBreak();
TPITarget_SendBreak();
#endif
}
/** Disables the target's TPI interface, exits programming mode and starts the target's application. */
void TPITarget_DisableTargetTPI(void)
{
#if defined(XPROG_VIA_HARDWARE_USART)
/* Turn off receiver and transmitter of the USART, clear settings */
UCSR1A |= (1 << TXC1) | (1 << RXC1);
UCSR1B = 0;
UCSR1C = 0;
/* Set all USART lines as input, tristate */
DDRD &= ~((1 << 5) | (1 << 3));
PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
#else
/* Set DATA and CLOCK lines to inputs */
BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
BITBANG_TPICLOCK_DDR &= ~BITBANG_TPICLOCK_MASK;
/* Tristate DATA and CLOCK lines */
BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
BITBANG_TPICLOCK_PORT &= ~BITBANG_TPICLOCK_MASK;
#endif
/* Tristate target /RESET line */
RESET_LINE_DDR &= ~RESET_LINE_MASK;
RESET_LINE_PORT &= ~RESET_LINE_MASK;
}
/** Sends a byte via the USART.
*
* \param[in] Byte Byte to send through the USART
*/
void TPITarget_SendByte(const uint8_t Byte)
{
#if defined(XPROG_VIA_HARDWARE_USART)
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
{
PORTD |= (1 << 3);
DDRD |= (1 << 3);
UCSR1B |= (1 << TXEN1);
UCSR1B &= ~(1 << RXEN1);
IsSending = true;
}
/* Wait until there is space in the hardware Tx buffer before writing */
while (!(UCSR1A & (1 << UDRE1)));
UCSR1A |= (1 << TXC1);
UDR1 = Byte;
#else
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
{
BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
IsSending = true;
}
/* Calculate the new USART frame data here while while we wait for a previous byte (if any) to finish sending */
uint16_t NewUSARTData = ((1 << 11) | (1 << 10) | (0 << 9) | ((uint16_t)Byte << 1) | (0 << 0));
/* Compute Even parity - while a bit is still set, chop off lowest bit and toggle parity bit */
uint8_t ParityData = Byte;
while (ParityData)
{
NewUSARTData ^= (1 << 9);
ParityData &= (ParityData - 1);
}
/* Wait until transmitter is idle before writing new data */
while (SoftUSART_BitCount);
/* Data shifted out LSB first, START DATA PARITY STOP STOP */
SoftUSART_Data = NewUSARTData;
SoftUSART_BitCount = BITS_IN_TPI_FRAME;
#endif
}
/** Receives a byte via the software USART, blocking until data is received.
*
* \return Received byte from the USART
*/
uint8_t TPITarget_ReceiveByte(void)
{
#if defined(XPROG_VIA_HARDWARE_USART)
/* Switch to Rx mode if currently in Tx mode */
if (IsSending)
{
while (!(UCSR1A & (1 << TXC1)));
UCSR1A |= (1 << TXC1);
UCSR1B &= ~(1 << TXEN1);
UCSR1B |= (1 << RXEN1);
DDRD &= ~(1 << 3);
PORTD &= ~(1 << 3);
IsSending = false;
}
/* Wait until a byte has been received before reading */
while (!(UCSR1A & (1 << RXC1)));
return UDR1;
#else
/* Switch to Rx mode if currently in Tx mode */
if (IsSending)
{
while (SoftUSART_BitCount);
BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
IsSending = false;
}
/* Wait until a byte has been received before reading */
SoftUSART_BitCount = BITS_IN_TPI_FRAME;
while (SoftUSART_BitCount);
/* Throw away the parity and stop bits to leave only the data (start bit is already discarded) */
return (uint8_t)SoftUSART_Data;
#endif
}
/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
void TPITarget_SendBreak(void)
{
#if defined(XPROG_VIA_HARDWARE_USART)
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
{
PORTD |= (1 << 3);
DDRD |= (1 << 3);
UCSR1B &= ~(1 << RXEN1);
UCSR1B |= (1 << TXEN1);
IsSending = true;
}
/* Need to do nothing for a full frame to send a BREAK */
for (uint8_t i = 0; i < BITS_IN_TPI_FRAME; i++)
{
/* Wait for a full cycle of the clock */
while (PIND & (1 << 5));
while (!(PIND & (1 << 5)));
}
#else
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
{
BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
IsSending = true;
}
while (SoftUSART_BitCount);
/* Need to do nothing for a full frame to send a BREAK */
SoftUSART_Data = 0x0FFF;
SoftUSART_BitCount = BITS_IN_TPI_FRAME;
#endif
}
/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
* calculation.
*
* \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
*/
bool TPITarget_WaitWhileNVMBusBusy(void)
{
TCNT0 = 0;
TIFR0 = (1 << OCF1A);
uint8_t TimeoutMS = TPI_NVM_TIMEOUT_MS;
/* Poll the STATUS register to check to see if NVM access has been enabled */
while (TimeoutMS)
{
/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
TPITarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
if (TPITarget_ReceiveByte() & TPI_STATUS_NVM)
return true;
if (TIFR0 & (1 << OCF1A))
{
TIFR0 = (1 << OCF1A);
TimeoutMS--;
}
}
return false;
}
#endif

100
Projects/AVRISP/Lib/XPROG/TPITarget.h
View File

@ -1,100 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for TPITarget.c.
*/
#ifndef _TPI_TARGET_
#define _TPI_TARGET_
/* Includes: */
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <LUFA/Common/Common.h>
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
#endif
/* Defines: */
#define BITBANG_TPIDATA_PORT PORTB
#define BITBANG_TPIDATA_DDR DDRB
#define BITBANG_TPIDATA_PIN PINB
#define BITBANG_TPIDATA_MASK (1 << 3)
#define BITBANG_TPICLOCK_PORT PORTB
#define BITBANG_TPICLOCK_DDR DDRB
#define BITBANG_TPICLOCK_PIN PINB
#define BITBANG_TPICLOCK_MASK (1 << 1)
/** Total number of bits in a single USART frame */
#define BITS_IN_TPI_FRAME 12
/** Timeout in milliseconds of a PDI busy-wait command */
#define TPI_NVM_TIMEOUT_MS 100
#define TPI_CMD_SLD 0x20
#define TPI_CMD_SST 0x60
#define TPI_CMD_SSTPR 0x68
#define TPI_CMD_SIN 0x10
#define TPI_CMD_SOUT 0x90
#define TPI_CMD_SLDCS 0x80
#define TPI_CMD_SSTCS 0xC0
#define TPI_CMD_SKEY 0xE0
#define TPI_STATUS_REG 0x00
#define TPI_CTRL_REG 0x02
#define TPI_ID_REG 0x0F
#define TPI_STATUS_NVM (1 << 1)
#define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
#define TPI_POINTER_INDIRECT 0
#define TPI_POINTER_INDIRECT_PI (1 << 2)
/* Function Prototypes: */
void TPITarget_EnableTargetTPI(void);
void TPITarget_DisableTargetTPI(void);
void TPITarget_SendByte(const uint8_t Byte);
uint8_t TPITarget_ReceiveByte(void);
void TPITarget_SendBreak(void);
bool TPITarget_WaitWhileNVMBusBusy(void);
#endif

0
Projects/AVRISP/Lib/XPROG/PDITarget.c → Projects/AVRISP/Lib/XPROG/XPROGTarget.c
View File

0
Projects/AVRISP/Lib/XPROG/PDITarget.h → Projects/AVRISP/Lib/XPROG/XPROGTarget.h
View File