RESET -> QK_BOOT keyboard readme ()

This commit is contained in:
Joel Challis 2022-08-20 11:34:17 +01:00 committed by GitHub
parent e7107691ab
commit d2accb48e7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
353 changed files with 374 additions and 374 deletions
data/templates/keyboard
keyboards
0xc7/61key
1upkeyboards/super16v2
40percentclub/polyandry
a_dux
acheron
apollo
elongate
shark
ada
ada1800mini
infinity81
adm42
adpenrose/kintsugi
ai03/jp60
akb
alt34
amjkeyboard/amj84
ano
atlantis/ak81_ve
atlas_65
atreyu
atset
aves60
axolstudio
foundation_gamma
yeti
hotswap
soldered
bacca70
bajjak
bbrfkr/dynamis
bioi/f60
blank/blank01
blaster75
blockboy/ac980mini
bobpad
bpiphany/ghost_squid
cablecardesigns/cypher/rev6
cannonkeys
brutalv2_65
cloudline
crin
gentoo
gentoo_hs
hoodrowg
cantor
chalice
chaos65
charue
charon
sunsetter_r2
cipulot
kallos
kawayo
ckeys/handwire_101
coarse
contender
cradio
creatkeebs
glacier
thera
crin
dailycraft
bat43
claw44
owl8
sandbox
stickey4
wings42
demiurge
dm9records/lain
doio/kb16
drhigsby/packrat
dtisaac
cg108
dosa40rgb
dyz
dyz40
dyz_tkl
selka40
dztech
duo_s
dz64rgb
endless80
eason/capsule65
ekow/akira
elephant42
eternal_keypad
eu_isolation
evyd13
eyeohdesigns
babyv
sprh
theboulevard
ferris/sweep
ffkeebs/puca
fjlabs
tf60ansi
tf60v2
tf65rgbv2

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -48,6 +48,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key of the keyboard (top right or bottom left in horizontal configuration)
* **Physical reset**: Briefly press the button on the bottom of the microcontroller or, if not present short the pin marked RST to a GND.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -41,5 +41,5 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.

View File

@ -24,7 +24,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the physical button on the back of the PCB for at least five seconds
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
### Step 2: compile firmware

View File

@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the front of the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
## Compile firmware

View File

@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (escape key at layer 2 in the default firmware)
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key at layer 2 in the default firmware)
## Compile firmware

View File

@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 2 ways:
* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the back of the PCB
* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
### Release Beta:
@ -25,7 +25,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the back of the PCB, for at least five seconds
* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
## Compile firmware

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,6 +22,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB

View File

@ -34,4 +34,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the front of the Elite-C microcontroller _**before soldering**_ it to the PCB- some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -26,4 +26,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,7 +24,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset jumper**: Briefly short the pads just below the TRRS connector on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Latest updates and information for alt34 is found at https://gitlab.com/altosys/alt34

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* Physical reset button: Briefly press the button on the back of the PCB - or short reset and ground pins
* Keycode in layout: Press the key mapped to `RESET`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down.
* Keycode in layout: Press the key mapped to `QK_BOOT`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down.

View File

@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment):
Enter the bootloader in 2 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
* **Physical reset pins**: Briefly short the reset pins using tweezers, a paperclip, or any other conductive material.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,7 +22,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
## More information

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -21,4 +21,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the space bar and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Briefly press the button labeled "SW1" on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -14,7 +14,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key (Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB. The button is next to the MCU.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available. For the default keymap it is on the right alt key on the second layer.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. For the default keymap it is on the right alt key on the second layer.
## Make example for this keyboard (after setting up your build environment):

View File

@ -18,6 +18,6 @@ Flashing example for this keyboard:
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -14,7 +14,7 @@ Gasket mounted 65% row staggered keyboard integrated a trackball
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
## build and flash firmware

View File

@ -21,5 +21,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
## Bootloader
* **Bootmagic reset**: Hold down the top left key (ESC) and plug in the keyboard
* **Physical reset button**: Short the two small pads labeled "RESET" the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Physical reset button**: Short the two small pads labeled "QK_BOOT" the back of the PCB
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -18,7 +18,7 @@ We strongly recommend this method. If the PCB is not soldered with switches at t
to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in.
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):

View File

@ -26,4 +26,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -19,7 +19,7 @@ Flashing example for this keyboard:
## Bootloader
Enter the bootloader in 3 ways:
* **Physical reset button**: Briefly short the pad connected to RESET and GND on the back
* **Keycode in layout**: Press the key mapped to `RESET`, this is the recommened method
* **Physical reset button**: Briefly short the pad connected to QK_BOOT and GND on the back
* **Keycode in layout**: Press the key mapped to `QK_BOOT`, this is the recommened method
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -12,7 +12,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: There are 2 holes underneath the spacebar position that if shorted will enter bootloader
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -15,4 +15,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -15,7 +15,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -27,4 +27,4 @@ Enter the bootloader in 3 ways:
* Press and hold the BOOT0 button.
* Press and release the NRST button.
* Release the BOOT0 button.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -20,6 +20,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down Escape and plug in the keyboard.
* **Physical reset button**: Briefly press the reset button below the pro-micro.
* **Keycode in layout**: The `RESET` key can be found by holding `FUNC` in between the space bars and pressing `ESC`.
* **Keycode in layout**: The `QK_BOOT` key can be found by holding `FUNC` in between the space bars and pressing `ESC`.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -28,4 +28,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Briefly short the pads labeled "Reset" on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -26,4 +26,4 @@ Enter the bootloader in 2 ways:
* **Physical reset button**: Power up the board while having the `Reset/Boot0` pad shorted.
* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `RESET`
* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `QK_BOOT`

View File

@ -139,7 +139,7 @@ This layer is not currently working but has been left as an example of how to wr
```
/* ADMIN
* ,-----------------------------------------.
* | RESET | | | X |
* | QK_BOOT | | | X |
* |------------+-----+-----------+----------|
* |ABOUT CKEYS | | | |
* |------------+-----+-----------+----------|
@ -150,7 +150,7 @@ This layer is not currently working but has been left as an example of how to wr
*/
```
The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
The most important key in this layer is the `QK_BOOT` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys.

View File

@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html)
#### Developer's Note
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode).
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode).

View File

@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
#### Developer's Note
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode).
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode).

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,7 +24,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.

View File

@ -16,8 +16,8 @@ A 80% keyboard
Enter the bootloader in 2 ways:
* Physical reset button: Press the `RESET` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `RESET` if it is available.
* Physical reset button: Press the `QK_BOOT` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available.
### Building the Firmware
Make example for this keyboard (after setting up your build environment):

View File

@ -18,8 +18,8 @@ A 75% keyboard
Enter the bootloader in 2 ways:
* Physical reset button: Press the `RESET` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `RESET` if it is available.
* Physical reset button: Press the `QK_BOOT` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available.
### Building the Firmware
Make example for this keyboard (after setting up your build environment):

View File

@ -17,7 +17,7 @@ Flashing example for this keyboard:
To reset the board into bootloader mode, do one of the following:
* Hold Esc while plugging the PCB in, if Bootmagic Lite is enabled (also erases persistent settings).
* Press the RESET keycode, if programmed on the keymap (Fn+R by default).
* Press the `QK_BOOT` keycode, if programmed on the keymap (Fn+R by default).
* Slide the switch just below the reset button to the left and press the reset button.
* Please note that you must slide it back to the right for the PCB to boot QMK again.

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -19,6 +19,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -29,4 +29,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (1! key) and plug in the keyboard
* **Physical reset button**: Short press the button under Spacebar keycap to enter the Bootloader and flash the firmware
* **Keycode in layout**: Press the key mapped to RESET if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
- **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable
- **Physical reset button**: Briefly short the pins under the Enter key
- **Keycode in layout**: Press the key mapped to `RESET` if it is available
- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
- **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable
- **Physical reset button**: Briefly short the pins under the spacebar key
- **Keycode in layout**: Press the key mapped to `RESET` if it is available
- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
- **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable
- **Physical reset button**: Briefly press the button on the back of the PCB
- **Keycode in layout**: Press the key mapped to `RESET` if it is available
- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
* **Physical reset button**: hold the button on the back of the PCB during plug in cable.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -12,7 +12,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):

View File

@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
## Bootloader Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down esc in the keyboard then replug
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET`
* **Keycode in layout**: Press the key mapped to `QK_BOOT`

View File

@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
## Bootloader Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down esc in the keyboard then replug
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET`
* **Keycode in layout**: Press the key mapped to `QK_BOOT`

View File

@ -20,5 +20,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (activated by holding the lower right key and tapping the lower left key)
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (activated by holding the lower right key and tapping the lower left key)
* **Physical reset button**: Briefly sort the pads labeled "RST" and "GND" on the micro-controller

View File

@ -16,7 +16,7 @@ enters from you collection of keyboard kits.
Enter the bootloader in 3 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
## Information

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -16,6 +16,6 @@ Flashing example for this keyboard:
make eyeohdesigns/babyv:default:flash
To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer.
To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -16,6 +16,6 @@ Flashing example for this keyboard:
make eyeohdesigns/sprh:default:flash
To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer.
To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -16,6 +16,6 @@ Flashing example for this keyboard:
make eyeohdesigns/theboulevard:default:flash
To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer.
To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -37,7 +37,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.
## Swapped Pins

View File

@ -10,7 +10,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the encoder)
* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

View File

@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

Some files were not shown because too many files have changed in this diff Show More