mfulz_github/qmk_firmware
1
0
Fork 1
mirror of https://github.com/mfulz/qmk_firmware.git synced 2025-11-04 07:12:33 +01:00
Code Issues Projects Releases Wiki Activity

[Keyboard] Sol keyboard conversion to split common (#5773)

Browse Source 
* Split common conversion

* Updated serial and encoder pins

* Fixing default folder until r2

* Fixing oled driver on slave split common

* Fixing keymap compile errors

* Fixing oled inactivity timer on slave split common

* Hoisted oled driver task, init, & activity to keyboard.c

* Update keyboards/sol/config.h

Co-Authored-By: XScorpion2 <rcalt2vt@gmail.com>

* Remove TAPPING_FORCE_HOLD
This commit is contained in:
XScorpion2 2019-05-06 17:06:43 -05:00 committed by Drashna Jaelre
parent 99500243e1
commit e01b2d518a
27 changed files with 250 additions and 1062 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

71
keyboards/sol/common/knob_v2.c
View File

@ -1,71 +0,0 @@
#include "knob_v2.h"
bool knob_prev_a = false;
static knob_report_t knob_report = {.dir = 0, .phase = 0};
void knob_init(void) {
// I use pins D1 (ISR1) & D4 for a knob.
// Set pin mode for D4 as input.
DDRD &= ~(0UL << ENCODER_PIN_2);
// Enable internal pull-up for D4.
// This is done by "writing" 1 to a pin that has its mode set to input.
PORTD |= (1 << ENCODER_PIN_2);
// Enable interrupt for D1
// For more info on the below flags see this awesome section 11.1 (pages 89-90) here:
// https://cdn-shop.adafruit.com/datasheets/atmel-7766-8-bit-avr-atmega16u4-32u4_datasheet.pdf
// Set pin mode & pull-up.
DDRD &= ~(0UL << ENCODER_PIN_1);
PORTD |= (1UL << ENCODER_PIN_1);
// INT: 33221100
EICRA |= 0b00010000; // 0b01 - any edge
// INT: 6 3210
EIMSK |= 0b00000100;
}
ISR(ENCODER_INT) {
bool a = PIND & (1 << ENCODER_PIN_1);
if (knob_prev_a != a) {
// "A" channel has REALLY changed.
knob_report.phase = a;
knob_prev_a = a;
bool b = PIND & (1 << ENCODER_PIN_2);
if (a == b) {
// Halfway through CCW rotation (A == B)
//
// +---YOU ARE HERE (A=1, B=1)
// | +---OR HERE (A=0, B=0)
// | |
// v v
// A: _____/^^^^^\__
// B: __/^^^^^\_____
knob_report.dir++;
} else {
// Halfway through CW rotation (A != B)
//
// +---YOU ARE HERE (A=1, B=0)
// | +---OR HERE (A=0, B=1)
// | |
// v v
// A: _____/^^^^^\_____
// B: ________/^^^^^\__
knob_report.dir--;
}
}
}
knob_report_t knob_report_read(void) {
// Return knob report.
return knob_report;
}
void knob_report_reset(void) {
// Call this ASAP once you've processed the previous knob report.
// TODO: This should probably be called within `knob_report_read`.
knob_report.dir = 0;
knob_report.phase = 0;
}

28
keyboards/sol/common/knob_v2.h
View File

@ -1,28 +0,0 @@
// Rotary knob implementation - Version 2.
// Uses 2 digital pins - D2 (via interrupt) & D6.
// #include "rev1.h"
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#ifndef ENCODER_PIN_1
#define ENCODER_PIN_1 PD2
#endif
#ifndef ENCODER_PIN_2
#define ENCODER_PIN_2 PD6
#endif
#ifndef ENCODER_INT
#define ENCODER_INT INT2_vect
#endif
typedef struct knob_report_t {
int8_t dir; // Contains number of rotations that happened
int8_t phase; // Contains 0 if last rotation happened on 90 degrees, 1 if on 270
} knob_report_t;
void knob_init(void);
knob_report_t knob_report_read(void);
void knob_report_reset(void);
bool knob_prev_a;
int8_t knob_dir;

70
keyboards/sol/config.h
View File

@ -20,3 +20,73 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
#define TAPPING_TERM 150
/* Select hand configuration */
#define SOFT_SERIAL_PIN D3
#define EE_HANDS
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 12
#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6}
// wiring of each half
#define MATRIX_COLS 7
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 }
// Encoder support
#define NUMBER_OF_ENCODERS 1
#define ENCODERS_PAD_A { D2 }
#define ENCODERS_PAD_B { D6 }
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* ws2812 RGB LED */
#define RGB_DI_PIN B3
#ifdef IOS_DEVICE_ENABLE
#define RGBLIGHT_LIMIT_VAL 40
#elif RGBLIGHT_FULL_POWER
#define RGBLIGHT_LIMIT_VAL 255
#else
#define RGBLIGHT_LIMIT_VAL 120
#endif
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL
#define LED_HITS_TO_REMEMBER 5
#define RGBLIGHT_ANIMATIONS
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
// 120 RGBoff, OLEDoff
// 120 OLED
// 330 RGB 6
// 300 RGB 32
// 310 OLED & RGB 32
#define USB_MAX_POWER_CONSUMPTION 500
#else
// fix iPhone and iPad power adapter issue
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

36
keyboards/sol/keymaps/brianweyer/keymap.c
View File

@ -11,8 +11,6 @@ extern keymap_config_t keymap_config;
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@ -59,8 +57,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
LCTL, LALT, FN, LGUI, RGB_MOD, SPC, DEL, BSPC, SPC, ADJ, LGUI, FN, LALT, LCTL,
//|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------|
VOLD, VOLU, SPC, ENT, ENT, SPC, DOWN, UP
// Rotary Left |--------+--------| |--------+-----------+ Rotary Right
SPC, ENT, ENT, SPC
// |--------+--------| |--------+-----------+
),
/* FN
@ -90,8 +88,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------|
VOLD, VOLU, _______, _______, _______, _______, UP, DOWN
// Rotary Left |--------+--------| |--------+-----------+ Rotary Right
_______, _______, _______, _______
// |--------+--------| |--------+-----------+
),
/* ADJ
@ -122,8 +120,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
//|--------+--------+--------+--------+--------+--+--------+--------| |--------+--------+--+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______ \
// Rotary Left |--------+--------| |--------+--------+ Rotary Right
_______, _______, _______, _______ \
// |--------+--------| |--------+--------+
)
};
@ -132,6 +130,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool TOG_STATUS = false;
int RGB_current_mode;
#ifdef ENCODER_ENABLE
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
} else if (index == 1) { /* Second encoder*/
if (clockwise) {
tap_code(KC_UP);
} else {
tap_code(KC_DOWN);
}
}
}
#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
@ -182,7 +198,7 @@ void matrix_init_user(void) {
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!has_usb())
if (!is_keyboard_master())
return OLED_ROTATION_180; // flip 180 for offhand
return rotation;
}
@ -244,7 +260,7 @@ static void render_status(void) {
}
void oled_task_user(void) {
if (is_master)
if (is_keyboard_master())
render_status();
else
render_logo();

6
keyboards/sol/keymaps/brianweyer/rules.mk
View File

@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no # Unicode
SWAP_HANDS_ENABLE = no # Enable one-hand typing
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000)
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
# Do not edit past here
ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
OPT_DEFS += -DENCODER_ENABLE_CUSTOM
SRC += common/knob_v2.c
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

28
keyboards/sol/keymaps/danielhklein/keymap.c
View File

@ -11,8 +11,6 @@ extern keymap_config_t keymap_config;
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@ -64,7 +62,7 @@ LAYOUT( \
KC_CAPS, _10, _11, _12, _13, _14, KC_LCBR, KC_RCBR, _15, _16, _17, _18, _19, KC_QUOT, \
KC_LSFT, _20, _21, _22, _23, _24, KC_GRV, KC_BSLS, _25, _26, _27, _28, _29, KC_RSFT, \
KC_LEFT, KC_DOWN, KC_LCTRL, KC_LALT, KC_LGUI, KC_BSPC, FN, ADJ, KC_SPC, KC_RGUI, KC_RALT, KC_RCTRL, KC_UP, KC_RIGHT, \
KC_VOLU, KC_VOLD, KC_BSPC, FN, ADJ, KC_SPC, KC_VOLU, KC_VOLD \
KC_BSPC, FN, ADJ, KC_SPC \
)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@ -132,7 +130,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, \
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
XXXXXXX, _______, XXXXXXX, XXXXXXX \
),
/* ADJ
@ -157,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
XXXXXXX, RGB_SAD, RGB_VAI, RGB_SAI, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PENT, XXXXXXX, XXXXXXX, \
XXXXXXX, RGB_HUD, RGB_VAD, RGB_HUI, XXXXXXX, XXXXXXX, QWERTY, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_SPC, XXXXXXX, XXXXXXX, \
XXXXXXX, RGBRST, RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_P0, KC_PDOT, KC_BSPC, XXXXXXX, XXXXXXX, \
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX \
XXXXXXX, XXXXXXX, _______, XXXXXXX \
)
};
@ -165,6 +163,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool TOG_STATUS = false;
int RGB_current_mode;
#ifdef ENCODER_ENABLE
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
} else if (index == 1) { /* Second encoder*/
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
}
#endif
// Setting ADJ layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
@ -308,7 +324,7 @@ static void render_status(void) {
}
void oled_task_user(void) {
if (is_master)
if (is_keyboard_master())
render_status();
else
render_logo();

6
keyboards/sol/keymaps/danielhklein/rules.mk
View File

@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no # Unicode
SWAP_HANDS_ENABLE = no # Enable one-hand typing
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000)
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
# Do not edit past here
ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
OPT_DEFS += -DENCODER_ENABLE_CUSTOM
SRC += common/knob_v2.c
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

28
keyboards/sol/keymaps/default/keymap.c
View File

@ -12,8 +12,6 @@ extern keymap_config_t keymap_config;
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@ -70,7 +68,7 @@ LAYOUT( \
FN_CAPS, _10, _11, _12, _13, _14, KC_LPRN, KC_RPRN, _15, _16, _17, _18, _19, KC_QUOT, \
KC_LSFT, _20, _21, _22, _23, _24, KC_LCBR, KC_RCBR, _25, _26, _27, _28, _29, KC_ENT, \
KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, \
KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \
KC_SPC, KC_DEL, KC_ENT, KC_SPC \
)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@ -138,7 +136,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \
KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \
_______, _______, _______, _______ \
),
/* ADJ
@ -163,7 +161,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
_______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \
KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \
_______, _______, _______, _______ \
)
};
@ -173,6 +171,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool TOG_STATUS = false;
int RGB_current_mode;
#ifdef ENCODER_ENABLE
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
} else if (index == 1) { /* Second encoder*/
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
}
#endif
// Setting ADJ layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
@ -316,7 +332,7 @@ static void render_status(void) {
}
void oled_task_user(void) {
if (is_master)
if (is_keyboard_master())
render_status();
else
render_logo();

6
keyboards/sol/keymaps/default/rules.mk
View File

@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no # Unicode
SWAP_HANDS_ENABLE = no # Enable one-hand typing
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000)
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
# Do not edit past here
ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
OPT_DEFS += -DENCODER_ENABLE_CUSTOM
SRC += common/knob_v2.c
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

26
keyboards/sol/keymaps/kageurufu/keymap.c
View File

@ -35,7 +35,7 @@ EXPAND_LAYOUT( \
FN_ESC, _10, _11, _12, _13, _14, RGB_SAI, RGB_VAI, _15, _16, _17, _18, _19, KC_QUOT, \
KC_LSPO, _20, _21, _22, _23, _24, RGB_SAD, RGB_VAD, _25, _26, _27, _28, _29, KC_RSPC, \
KC_LCTL, KC_LGUI, KC_LGUI, KC_LALT, FN, KC_SPC, FN, FN, KC_SPC, KC_MINS, KC_EQL, KC_DOWN, KC_PGUP, KC_PGDN, \
KC_VOLD, KC_VOLU, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, KC_VOLD, KC_VOLU \
KC_SPC, KC_BSPC, KC_ENT, KC_SPC \
)
#define BASE_LAYOUT(...) _BASE_LAYOUT(__VA_ARGS__)
@ -65,15 +65,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
________________FUNCTION_L3________________, _______, _______, ________________FUNCTION_R3________________, \
________________FUNCTION_L4________________, _______, _______, ________________FUNCTION_R4________________, \
________________FUNCTION_L5________________, ADJ, ADJ, ________________FUNCTION_R5________________, \
KC_VOLD, KC_VOLU, _______, KC_DEL, _______, _______, KC_VOLD, KC_VOLU \
_______, KC_DEL, _______, _______ \
),
[_ADJ] = EXPAND_LAYOUT( \
[_ADJ] = EXPAND_LAYOUT( \
_________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, \
_________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, \
_________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \
_________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \
_________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \
KC_VOLD, KC_VOLU, _______, _______, _______, _______, KC_VOLD, KC_VOLU \
_______, _______, _______, _______ \
)
};
#ifdef ENCODER_ENABLE
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
} else if (index == 1) { /* Second encoder*/
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
}
#endif

6
keyboards/sol/keymaps/kageurufu/rules.mk
View File

@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no # Unicode
SWAP_HANDS_ENABLE = no # Enable one-hand typing
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000)
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
# Do not edit past here
ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
OPT_DEFS += -DENCODER_ENABLE_CUSTOM
SRC += common/knob_v2.c
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

12
keyboards/sol/keymaps/xulkal/keymap.c
View File

@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_________________QWERTY_L3_________________, KC_GRV, KC_QUOT, _________________QWERTY_R3_________________, \
_________________QWERTY_L4_________________, RGB_TOG, RGBRST, _________________QWERTY_R4_________________, \
_________________QWERTY_L5_________________, RGB_RMOD, RGB_MOD, _________________QWERTY_R5_________________, \
KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \
KC_SPC, KC_DEL, KC_ENT, KC_SPC \
),
#ifndef GAMELAYER_DISABLE
@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
___________________GAME_L3_________________, KC_GRV, KC_QUOT, ___________________GAME_R3_________________, \
___________________GAME_L4_________________, RGB_TOG, RGBRST, ___________________GAME_R4_________________, \
___________________GAME_L5_________________, RGB_RMOD, RGB_MOD, ___________________GAME_R5_________________, \
KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \
KC_SPC, KC_DEL, KC_ENT, KC_SPC \
),
#endif
@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
__________________LOWER_L3_________________, _______, _______, __________________LOWER_R3_________________, \
__________________LOWER_L4_________________, _______, _______, __________________LOWER_R4_________________, \
__________________LOWER_L5_________________, _______, _______, __________________LOWER_R5_________________, \
_______, _______, _______, _______, _______, _______, _______, _______ \
_______, _______, _______, _______ \
),
[_RAISE] = EXPAND_LAYOUT( \
@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
__________________RAISE_L3_________________, _______, _______, __________________RAISE_R3_________________, \
__________________RAISE_L4_________________, _______, _______, __________________RAISE_R4_________________, \
__________________RAISE_L5_________________, _______, _______, __________________RAISE_R5_________________, \
_______, _______, _______, _______, _______, _______, _______, _______ \
_______, _______, _______, _______ \
),
#ifdef TRILAYER_ENABLED
@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \
_________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \
_________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \
_______, _______, _______, _______, _______, _______, _______, _______ \
_______, _______, _______, _______ \
),
#endif
};
@ -158,7 +158,7 @@ static void render_status(void) {
}
void oled_task_user(void) {
if (has_usb()) {
if (is_keyboard_master()) {
render_status();
} else {
render_logo();

7
keyboards/sol/keymaps/xulkal/rules.mk
View File

@ -16,17 +16,12 @@ RGB_MATRIX_KEYPRESSES = yes # Enable reactive per-key effects. Can be very l
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no # Unicode
SWAP_HANDS_ENABLE = no # Enable one-hand typing
ENCODER_ENABLE_CUSTOM = no # Enable rotary encoder (+90)
OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000)
ENCODER_ENABLE = no # Enable rotary encoder (+90)
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
# Do not edit past here
ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
OPT_DEFS += -DENCODER_ENABLE_CUSTOM
SRC += common/knob_v2.c
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

111
keyboards/sol/rev1/config.h
View File

@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
@ -27,117 +26,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT Sol
#define DESCRIPTION "An RGB, split, ortho-esque keyboard"
#define PREVENT_STUCK_MODIFIERS
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 150
#define USE_I2C
#define USE_SERIAL
#define USE_SERIAL_PD3
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
/* Select rows configuration */
// Rows are 4 or 5
// #define HELIX_ROWS 5 see ./rules.mk
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 12
#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6}
// wiring of each half
#define MATRIX_COLS 7
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 }
// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN B3
#define RGBLIGHT_TIMER
//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
#define DRIVER_COUNT 1
// #define RGB_MATRIX_KEYPRESSES
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 5
#ifdef LED_MIRRORED
#define RGBLED_NUM 35
#else
#define RGBLED_NUM 70
#endif
#define DRIVER_LED_TOTAL RGBLED_NUM
#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950
#ifdef IOS_DEVICE_ENABLE
#define RGBLIGHT_LIMIT_VAL 40
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40
#elif RGBLIGHT_FULL_POWER
#define RGBLIGHT_LIMIT_VAL 255
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
#else
#define RGBLIGHT_LIMIT_VAL 120
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#endif
#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10)
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_ANIMATIONS
#define LED_HITS_TO_REMEMBER 5
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
// 120 RGBoff, OLEDoff
// 120 OLED
// 330 RGB 6
// 300 RGB 32
// 310 OLED & RGB 32
#define USB_MAX_POWER_CONSUMPTION 500
#else
// fix iPhone and iPad power adapter issue
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

304
keyboards/sol/rev1/matrix.c
View File

@ -1,304 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include <drivers/avr/pro_micro.h>
#include "serial.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
#ifdef ENCODER_ENABLE_CUSTOM
#include "common/knob_v2.h"
#endif
#define ERROR_DISCONNECT_COUNT 5
static uint8_t debouncing = DEBOUNCE;
static const int ROWS_PER_HAND = MATRIX_ROWS/2;
static uint8_t error_count = 0;
uint8_t is_master = 0 ;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
static uint8_t matrix_master_scan(void);
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// initialize row and col
unselect_rows();
init_cols();
TX_RX_LED_INIT;
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
is_master = has_usb();
#ifdef ENCODER_ENABLE_CUSTOM
knob_init(); //FOR ENCODER
#endif
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
// Right hand is stored after the left in the matirx so, we need to offset it
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i+offset] != cols) {
matrix_debouncing[i+offset] = cols;
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
}
}
#ifdef ENCODER_ENABLE_CUSTOM
knob_report_t knob_report = knob_report_read();
knob_report_reset();
matrix[5 + offset] &= 0b11111100;
if (knob_report.phase) { // I check for phase to avoid handling the rotation twice (on 90 and 270 degrees).
if (knob_report.dir > 0) {
matrix[5 + offset] |= 0b00000001;
} else if (knob_report.dir < 0) {
matrix[5 + offset] |= 0b00000010;
}
}
#endif
return 1;
}
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int ret=serial_update_buffers();
if (ret ) {
return 1;
}
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_slave_buffer[i];
}
return 0;
}
uint8_t matrix_scan(void)
{
if (is_master) {
matrix_master_scan();
}else{
matrix_slave_scan();
int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[offset+i] = serial_master_buffer[i];
}
matrix_scan_quantum();
}
return 1;
}
uint8_t matrix_master_scan(void) {
int ret = _matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_master_buffer[i] = matrix[offset+i];
}
if( serial_transaction() ) {
// turn on the indicator led when halves are disconnected
TXLED1;
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
// turn off the indicator led on no error
TXLED0;
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_slave_buffer[i] = matrix[offset+i];
}
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
static void init_cols(void)
{
for(int x = 0; x < MATRIX_COLS; x++) {
_SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
_SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
}
}
static matrix_row_t read_cols(void)
{
matrix_row_t result = 0;
for(int x = 0; x < MATRIX_COLS; x++) {
result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
}
return result;
}
static void unselect_rows(void)
{
for(int x = 0; x < ROWS_PER_HAND; x++) {
_SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
_SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
}
}
static void select_row(uint8_t row)
{
_SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
_SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
}

6
keyboards/sol/rev1/rev1.c
View File

@ -1,4 +1,4 @@
#include "sol.h"
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
@ -81,7 +81,3 @@
};
#endif
void matrix_init_kb(void) {
matrix_init_user();
};

71
keyboards/sol/rev1/rev1.h
View File

@ -1,70 +1 @@
#ifndef REV1_H
#define REV1_H
#include "sol.h"
//void promicro_bootloader_jmp(bool program);
#include "quantum.h"
#ifdef RGBLIGHT_ENABLE
//rgb led driver
#include "ws2812.h"
#endif
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#endif
//void promicro_bootloader_jmp(bool program);
// LEL/LER/REL/RER are
// LeftEncoderLeft, LeftEncoderRight, RightEncoderLeft, and RightEncoderRight
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
LEL, LER, L55, L56, R56, R50, REL, RER \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ L40, L41, L42, L43, L44, L45, L46 }, \
{ LEL, LER, KC_NO, KC_NO, KC_NO, L55, L56 }, \
{ R05, R04, R03, R02, R01, R00, R06 }, \
{ R15, R14, R13, R12, R11, R10, R16 }, \
{ R25, R24, R23, R22, R21, R20, R26 }, \
{ R35, R34, R33, R32, R31, R30, R36 }, \
{ R45, R44, R43, R42, R41, R40, R46 }, \
{ REL, RER, KC_NO, KC_NO, KC_NO, R50, R56 } \
}
#define KC________ KC_TRNS
#define KC_RGB_MOD RGB_MOD
#define KC_FN FN
#define KC_ADJ ADJ
#define LAYOUT_kc( \
L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
LEL, LER, L55, L56, R56, R50, REL, RER \
) \
LAYOUT( \
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \
KC_##LEL, KC_##LER, KC_##L55, KC_##L56, KC_##R56, KC_##R50, KC_##REL, KC_##RER \
)
#endif
#pragma once

2
keyboards/sol/rev1/rules.mk
View File

@ -1,2 +0,0 @@
SRC += rev1/matrix.c \
rev1/split_util.c

54
keyboards/sol/rev1/split_util.c
View File

@ -1,54 +0,0 @@
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "serial.h"
volatile bool isLeftHand = true;
static void setup_handedness(void) {
#ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
#else
#if defined(MASTER_RIGHT)
isLeftHand = !has_usb();
#else
isLeftHand = has_usb();
#endif
#endif
}
static void keyboard_master_setup(void) {
serial_master_init();
}
static void keyboard_slave_setup(void) {
serial_slave_init();
}
bool has_usb(void) {
USBCON |= (1 << OTGPADE); //enables VBUS pad
_delay_us(5);
return (USBSTA & (1<<VBUS)); //checks state of VBUS
}
void split_keyboard_setup(void) {
setup_handedness();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}
// this code runs before the usb and keyboard is initialized
void matrix_setup(void) {
split_keyboard_setup();
}

15
keyboards/sol/rev1/split_util.h
View File

@ -1,15 +0,0 @@
#ifndef SPLIT_KEYBOARD_UTIL_H
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
void matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
#endif

7
keyboards/sol/rules.mk
View File

@ -1,5 +1,3 @@
SRC += serial.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
@ -48,6 +46,9 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Custom local font file
OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
SPLIT_KEYBOARD = yes
ENCODER_ENABLE = yes
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@ -62,6 +63,4 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = sol/rev1

288
keyboards/sol/serial.c
View File

@ -1,288 +0,0 @@
/*
* WARNING: be careful changing this code, it is very timing dependent
*/
#ifndef F_CPU
#define F_CPU 16000000
#endif
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdbool.h>
#include "serial.h"
#ifdef USE_SERIAL
#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
// Serial pulse period in microseconds.
#define SELECT_SERIAL_SPEED 1
#if SELECT_SERIAL_SPEED == 0
// Very High speed
#define SERIAL_DELAY 4 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#define READ_WRITE_WIDTH_ADJUST 10 // cycles
#elif SELECT_SERIAL_SPEED == 1
// High speed
#define SERIAL_DELAY 6 // micro sec
#define READ_WRITE_START_ADJUST 23 // cycles
#define READ_WRITE_WIDTH_ADJUST 10 // cycles
#elif SELECT_SERIAL_SPEED == 2
// Middle speed
#define SERIAL_DELAY 12 // micro sec
#define READ_WRITE_START_ADJUST 25 // cycles
#define READ_WRITE_WIDTH_ADJUST 10 // cycles
#elif SELECT_SERIAL_SPEED == 3
// Low speed
#define SERIAL_DELAY 24 // micro sec
#define READ_WRITE_START_ADJUST 25 // cycles
#define READ_WRITE_WIDTH_ADJUST 10 // cycles
#elif SELECT_SERIAL_SPEED == 4
// Very Low speed
#define SERIAL_DELAY 50 // micro sec
#define READ_WRITE_START_ADJUST 25 // cycles
#define READ_WRITE_WIDTH_ADJUST 10 // cycles
#else
#error Illegal Serial Speed
#endif
#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
#define SLAVE_INT_WIDTH 1
#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
#define SLAVE_DATA_CORRUPT (1<<0)
volatile uint8_t status = 0;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static
void serial_delay_half1(void) {
_delay_us(SERIAL_DELAY_HALF1);
}
inline static
void serial_delay_half2(void) {
_delay_us(SERIAL_DELAY_HALF2);
}
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
}
// make the serial pin an input with pull-up resistor
inline static
void serial_input_with_pullup(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
}
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
}
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
void serial_master_init(void) {
serial_output();
serial_high();
}
void serial_slave_init(void) {
serial_input_with_pullup();
// Enable INT3
EIMSK |= _BV(INT3);
// Trigger on falling edge of INT3
EICRA &= ~(_BV(ISC30) | _BV(ISC31));
}
// Used by the sender to synchronize timing with the reciver.
static
void sync_recv(void) {
for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
}
// This shouldn't hang if the slave disconnects because the
// serial line will float to high if the slave does disconnect.
while (!serial_read_pin());
}
// Used by the reciver to send a synchronization signal to the sender.
static
void sync_send(void) {
serial_low();
serial_delay();
serial_high();
}
// Reads a byte from the serial line
static
uint8_t serial_read_byte(void) {
uint8_t byte = 0;
_delay_sub_us(READ_WRITE_START_ADJUST);
for ( uint8_t i = 0; i < 8; ++i) {
serial_delay_half1(); // read the middle of pulses
byte = (byte << 1) | serial_read_pin();
_delay_sub_us(READ_WRITE_WIDTH_ADJUST);
serial_delay_half2();
}
return byte;
}
// Sends a byte with MSB ordering
static
void serial_write_byte(uint8_t data) {
uint8_t b = 1<<7;
while( b ) {
if(data & b) {
serial_high();
} else {
serial_low();
}
b >>= 1;
serial_delay();
}
serial_low(); // sync_send() / senc_recv() need raise edge
}
// interrupt handle to be used by the slave device
ISR(SERIAL_PIN_INTERRUPT) {
serial_output();
// slave send phase
uint8_t checksum = 0;
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
sync_send();
serial_write_byte(serial_slave_buffer[i]);
checksum += serial_slave_buffer[i];
}
sync_send();
serial_write_byte(checksum);
// slave switch to input
sync_send(); //0
serial_delay_half1(); //1
serial_low(); //2
serial_input_with_pullup(); //2
serial_delay_half1(); //3
// slave recive phase
uint8_t checksum_computed = 0;
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
sync_recv();
serial_master_buffer[i] = serial_read_byte();
checksum_computed += serial_master_buffer[i];
}
sync_recv();
uint8_t checksum_received = serial_read_byte();
if ( checksum_computed != checksum_received ) {
status |= SLAVE_DATA_CORRUPT;
} else {
status &= ~SLAVE_DATA_CORRUPT;
}
sync_recv(); //weit master output to high
}
inline
bool serial_slave_DATA_CORRUPT(void) {
return status & SLAVE_DATA_CORRUPT;
}
// Copies the serial_slave_buffer to the master and sends the
// serial_master_buffer to the slave.
//
// Returns:
// 0 => no error
// 1 => slave did not respond
// 2 => checksum error
int serial_update_buffers(void) {
// this code is very time dependent, so we need to disable interrupts
cli();
// signal to the slave that we want to start a transaction
serial_output();
serial_low();
_delay_us(SLAVE_INT_WIDTH);
// wait for the slaves response
serial_input_with_pullup();
_delay_us(SLAVE_INT_RESPONSE_TIME);
// check if the slave is present
if (serial_read_pin()) {
// slave failed to pull the line low, assume not present
serial_output();
serial_high();
sei();
return 1;
}
// master recive phase
// if the slave is present syncronize with it
uint8_t checksum_computed = 0;
// receive data from the slave
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
sync_recv();
serial_slave_buffer[i] = serial_read_byte();
checksum_computed += serial_slave_buffer[i];
}
sync_recv();
uint8_t checksum_received = serial_read_byte();
if (checksum_computed != checksum_received) {
serial_output();
serial_high();
sei();
return 2;
}
// master switch to output
sync_recv(); //0
serial_delay(); //1
serial_low(); //3
serial_output(); // 3
serial_delay_half1(); //4
// master send phase
uint8_t checksum = 0;
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
sync_send();
serial_write_byte(serial_master_buffer[i]);
checksum += serial_master_buffer[i];
}
sync_send();
serial_write_byte(checksum);
// always, release the line when not in use
sync_send();
sei();
return 0;
}
#endif

26
keyboards/sol/serial.h
View File

@ -1,26 +0,0 @@
#ifndef MY_SERIAL_H
#define MY_SERIAL_H
#include <stdbool.h>
/* TODO: some defines for interrupt setup */
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#define SERIAL_PIN_MASK _BV(PD3) //SErial pin goes here, D0-D3
#define SERIAL_PIN_INTERRUPT INT3_vect //"INT#" of your serial pin
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
// Buffers for master - slave communication
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(void);
bool serial_slave_data_corrupt(void);
#endif

54
keyboards/sol/sol.h
View File

@ -1,7 +1,53 @@
#ifndef SOL_H
#define SOL_H
#pragma once
#include "rev1.h"
#include "quantum.h"
#ifdef KEYBOARD_sol_rev1
#include "rev1.h"
#elif KEYBOARD_sol_rev2
#include "rev2.h"
#endif
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
L55, L56, R56, R50 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ L40, L41, L42, L43, L44, L45, L46 }, \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, L55, L56 }, \
{ R05, R04, R03, R02, R01, R00, R06 }, \
{ R15, R14, R13, R12, R11, R10, R16 }, \
{ R25, R24, R23, R22, R21, R20, R26 }, \
{ R35, R34, R33, R32, R31, R30, R36 }, \
{ R45, R44, R43, R42, R41, R40, R46 }, \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R50, R56 } \
}
#define KC________ KC_TRNS
#define KC_RGB_MOD RGB_MOD
#define KC_FN FN
#define KC_ADJ ADJ
#define LAYOUT_kc( \
L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
L55, L56, R56, R50 \
) \
LAYOUT( \
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \
KC_##L55, KC_##L56, KC_##R56, KC_##R50 \
)

13
quantum/quantum.c
View File

@ -247,12 +247,6 @@ bool process_record_quantum(keyrecord_t *record) {
preprocess_tap_dance(keycode, record);
#endif
#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT)
// Wake up oled if user is using those fabulous keys!
if (record->event.pressed)
oled_on();
#endif
if (!(
#if defined(KEY_LOCK_ENABLE)
// Must run first to be able to mask key_up events.
@ -976,9 +970,6 @@ void matrix_init_quantum() {
#ifdef OUTPUT_AUTO_ENABLE
set_output(OUTPUT_AUTO);
#endif
#ifdef OLED_DRIVER_ENABLE
oled_init(OLED_ROTATION_0);
#endif
matrix_init_kb();
}
@ -1015,10 +1006,6 @@ void matrix_scan_quantum() {
haptic_task();
#endif
#ifdef OLED_DRIVER_ENABLE
oled_task();
#endif
matrix_scan_kb();
}
#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS))

2
quantum/split_common/matrix.c
View File

@ -299,7 +299,7 @@ uint8_t _matrix_scan(void) {
debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
return 1;
return (uint8_t)changed;
}
uint8_t matrix_scan(void) {

19
tmk_core/common/keyboard.c
View File

@ -75,6 +75,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifdef QWIIC_ENABLE
# include "qwiic.h"
#endif
#ifdef OLED_DRIVER_ENABLE
#include "oled_driver.h"
#endif
#ifdef VELOCIKEY_ENABLE
#include "velocikey.h"
#endif
@ -205,6 +208,9 @@ void keyboard_init(void) {
#ifdef QWIIC_ENABLE
qwiic_init();
#endif
#ifdef OLED_DRIVER_ENABLE
oled_init(OLED_ROTATION_0);
#endif
#ifdef PS2_MOUSE_ENABLE
ps2_mouse_init();
#endif
@ -262,7 +268,11 @@ void keyboard_task(void)
uint8_t keys_processed = 0;
#endif
#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT)
uint8_t ret = matrix_scan();
#else
matrix_scan();
#endif
if (is_keyboard_master()) {
for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
@ -306,6 +316,15 @@ MATRIX_LOOP_END:
qwiic_task();
#endif
#ifdef OLED_DRIVER_ENABLE
oled_task();
#ifndef OLED_DISABLE_TIMEOUT
// Wake up oled if user is using those fabulous keys!
if (ret)
oled_on();
#endif
#endif
#ifdef MOUSEKEY_ENABLE
// mousekey repeat & acceleration
mousekey_task();