Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile time options.

Demos/Device/GenericHID/GenericHID.c

@@ -42,6 +42,18 @@ BUTTLOADTAG(BuildTime,   __TIME__);
 BUTTLOADTAG(BuildDate,   __DATE__);
 BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);
 
+/* Scheduler Task List */
+TASK_LIST
+{
+	#if !defined(INTERRUPT_CONTROL_ENDPOINT)
+	{ Task: USB_USBTask          , TaskStatus: TASK_STOP },
+	#endif
+	
+	#if !defined(INTERRUPT_DATA_ENDPOINT)
+	{ Task: USB_HID_Report       , TaskStatus: TASK_STOP },
+	#endif
+};
+
 /** Static buffer to hold the last received report from the host, so that it can be echoed back in the next sent report */
 static uint8_t LastReceived[GENERIC_REPORT_SIZE];
 
@@ -61,11 +73,14 @@ int main(void)
 	/* Indicate USB not ready */
 	UpdateStatus(Status_USBNotReady);
 
+	/* Initialize Scheduler so that it can be used */
+	Scheduler_Init();
+
 	/* Initialize USB Subsystem */
 	USB_Init();
 	
-	/* >> APPLICATION INIT CODE HERE << */
-	for (;;);
+	/* Scheduling - routine never returns, so put this last in the main function */
+	Scheduler_Start();
 }
 
 /** Event handler for the USB_Reset event. This fires when the USB interface is reset by the USB host, before the
@@ -74,11 +89,13 @@ int main(void)
  */
 EVENT_HANDLER(USB_Reset)
 {
+	#if defined(INTERRUPT_CONTROL_ENDPOINT)
 	/* Select the control endpoint */
 	Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
 
 	/* Enable the endpoint SETUP interrupt ISR for the control endpoint */
 	USB_INT_Enable(ENDPOINT_INT_SETUP);
+	#endif
 }
 
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
@@ -109,16 +126,20 @@ EVENT_HANDLER(USB_ConfigurationChanged)
 		                       ENDPOINT_DIR_IN, GENERIC_EPSIZE,
 	                           ENDPOINT_BANK_SINGLE);
 
+	#if defined(INTERRUPT_DATA_ENDPOINT)
 	/* Enable the endpoint IN interrupt ISR for the report endpoint */
 	USB_INT_Enable(ENDPOINT_INT_IN);
+	#endif
 
 	/* Setup Generic OUT Report Endpoint */
 	Endpoint_ConfigureEndpoint(GENERIC_OUT_EPNUM, EP_TYPE_INTERRUPT,
 		                       ENDPOINT_DIR_OUT, GENERIC_EPSIZE,
 	                           ENDPOINT_BANK_SINGLE);
 
+	#if defined(INTERRUPT_DATA_ENDPOINT)
 	/* Enable the endpoint OUT interrupt ISR for the report endpoint */
 	USB_INT_Enable(ENDPOINT_INT_OUT);
+	#endif
 
 	/* Indicate USB connected and ready */
 	UpdateStatus(Status_USBReady);
@@ -237,6 +258,49 @@ void CreateGenericHIDReport(uint8_t* DataArray)
 	  DataArray[i] = LastReceived[i];
 }
 
+#if !defined(INTERRUPT_DATA_ENDPOINT)
+TASK(USB_HID_Report)
+{
+	/* Check if the USB system is connected to a host */
+	if (USB_IsConnected)
+	{
+		Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM);
+		
+		if (Endpoint_ReadWriteAllowed())
+		{
+			/* Create a tempoary buffer to hold the read in report from the host */
+			uint8_t GenericData[GENERIC_REPORT_SIZE];
+			
+			/* Read Generic Report Data */
+			Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData));
+			
+			/* Process Generic Report Data */
+			ProcessGenericHIDReport(GenericData);
+
+			/* Finalize the stream transfer to send the last packet */
+			Endpoint_ClearCurrentBank();
+		}	
+
+		Endpoint_SelectEndpoint(GENERIC_IN_EPNUM);
+		
+		if (Endpoint_ReadWriteAllowed())
+		{
+			/* Create a tempoary buffer to hold the report to send to the host */
+			uint8_t GenericData[GENERIC_REPORT_SIZE];
+			
+			/* Create Generic Report Data */
+			CreateGenericHIDReport(GenericData);
+
+			/* Write Generic Report Data */
+			Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData));
+
+			/* Finalize the stream transfer to send the last packet */
+			Endpoint_ClearCurrentBank();
+		}
+	}
+}
+#endif
+
 /** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as
  *  a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send
  *  HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB
@@ -247,6 +311,7 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 	/* Save previously selected endpoint before selecting a new endpoint */
 	uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
 
+	#if defined(INTERRUPT_CONTROL_ENDPOINT)
 	/* Check if the control endpoint has received a request */
 	if (Endpoint_HasEndpointInterrupted(ENDPOINT_CONTROLEP))
 	{
@@ -259,7 +324,9 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 		/* Handshake the endpoint setup interrupt - must be after the call to USB_USBTask() */
 		USB_INT_Clear(ENDPOINT_INT_SETUP);
 	}
+	#endif
 
+	#if defined(INTERRUPT_DATA_ENDPOINT)
 	/* Check if Generic IN endpoint has interrupted */
 	if (Endpoint_HasEndpointInterrupted(GENERIC_IN_EPNUM))
 	{
@@ -272,7 +339,7 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 		/* Clear the Generic IN Report endpoint interrupt and select the endpoint */
 		Endpoint_ClearEndpointInterrupt(GENERIC_IN_EPNUM);
 
-		/* Create a tempoary buffer to hold the report to send to the host */
+		/* Create a temporary buffer to hold the report to send to the host */
 		uint8_t GenericData[GENERIC_REPORT_SIZE];
 		
 		/* Create Generic Report Data */
@@ -297,7 +364,7 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 		/* Clear the Generic OUT Report endpoint interrupt and select the endpoint */
 		Endpoint_ClearEndpointInterrupt(GENERIC_OUT_EPNUM);
 
-		/* Create a tempoary buffer to hold the read in report from the host */
+		/* Create a temporary buffer to hold the read in report from the host */
 		uint8_t GenericData[GENERIC_REPORT_SIZE];
 		
 		/* Read Generic Report Data */
@@ -309,6 +376,7 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 		/* Finalize the stream transfer to send the last packet */
 		Endpoint_ClearCurrentBank();
 	}
+	#endif
 
 	/* Restore previously selected endpoint */
 	Endpoint_SelectEndpoint(PrevSelectedEndpoint);

Demos/Device/GenericHID/GenericHID.h

@@ -47,6 +47,7 @@
 		#include "Descriptors.h"
 
 		#include <LUFA/Version.h>                    // Library Version Information
+		#include <LUFA/Scheduler/Scheduler.h>        // Simple scheduler for task management
 		#include <LUFA/Common/ButtLoadTag.h>         // PROGMEM tags readable by the ButtLoad project
 		#include <LUFA/Drivers/USB/USB.h>            // USB Functionality
 		#include <LUFA/Drivers/Board/LEDs.h>         // LEDs driver
@@ -80,6 +81,9 @@
 		/** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
 		HANDLES_EVENT(USB_ConfigurationChanged);
 	
+	/* Task Definitions: */
+		TASK(USB_HID_Report);
+
 	/* Function Prototypes: */
 		void UpdateStatus(uint8_t CurrentStatus);
 		void ProcessGenericHIDReport(uint8_t* DataArray);

Demos/Device/GenericHID/GenericHID.txt

@@ -60,5 +60,19 @@
  *    <td>This token defines the size of the device reports, both sent and received. The value must be an
  *        integer ranging from 1 to 255.</td>
  *   </tr>
+ *   <tr>
+ *    <td>INTERRUPT_CONTROL_ENDPOINT</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, this causes the demo to enable interrupts for the control endpoint,
+ *        which services control requests from the host. If not defined, the control endpoint
+ *        is serviced via polling using the task scheduler.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>INTERRUPT_DATA_ENDPOINT</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, this causes the demo to enable interrupts for the data endpoints,
+ *        which services incomming LED reports and outgoing key status reports to and from the host.
+ *        If not defined, the data endpoints are serviced via polling using the task scheduler.</td>
+ *   </tr>
  *  </table>
  */

Demos/Device/Keyboard/Keyboard.c

@@ -545,4 +545,3 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 	}
 	#endif
 }
-

Demos/Host/GenericHIDHost/GenericHIDHost.c

@@ -350,6 +350,9 @@ TASK(USB_HID_Host)
  */
 ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 {
+	/* Save previously selected pipe before selecting a new pipe */
+	uint8_t PrevSelectedPipe = Pipe_GetCurrentPipe();
+
 	/* Check to see if the HID data IN pipe has caused the interrupt */
 	if (Pipe_HasPipeInterrupted(HID_DATA_IN_PIPE))
 	{
@@ -367,5 +370,8 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 			ReadNextReport();
 		}
 	}
+
+	/* Restore previously selected pipe */
+	Pipe_SelectPipe(PrevSelectedPipe);
 }
 #endif

Demos/Host/KeyboardHost/KeyboardHost.c

@@ -350,6 +350,9 @@ TASK(USB_Keyboard_Host)
  */
 ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 {
+	/* Save previously selected pipe before selecting a new pipe */
+	uint8_t PrevSelectedPipe = Pipe_GetCurrentPipe();
+
 	/* Check to see if the keyboard data pipe has caused the interrupt */
 	if (Pipe_HasPipeInterrupted(KEYBOARD_DATAPIPE))
 	{
@@ -366,5 +369,8 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 			/* Read and process the next report from the device */
 			ReadNextReport();
 	}
+	
+	/* Restore previously selected pipe */
+	Pipe_SelectPipe(PrevSelectedPipe);
 }
 #endif

Demos/Host/MouseHost/MouseHost.c

@@ -346,6 +346,9 @@ TASK(USB_Mouse_Host)
  */
 ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 {
+	/* Save previously selected pipe before selecting a new pipe */
+	uint8_t PrevSelectedPipe = Pipe_GetCurrentPipe();
+
 	/* Check to see if the mouse data pipe has caused the interrupt */
 	if (Pipe_HasPipeInterrupted(MOUSE_DATAPIPE))
 	{
@@ -363,5 +366,8 @@ ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
 			ReadNextReport();
 		}
 	}
+
+	/* Restore previously selected pipe */
+	Pipe_SelectPipe(PrevSelectedPipe);
 }
 #endif

LUFA/ChangeLog.txt

@@ -7,8 +7,12 @@
  /** \page Page_ChangeLog Project Changelog
   *
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
+  *
   *  - Added new GenericHIDHost demo
   *  - Corrections to the KeyboardHost and MouseHost demos' pipe handling to freeze and unfreeze the data pipes at the point of use
+  *  - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR
+  *  - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile
+  *    time options
   *
   *  \section Sec_ChangeLog090401 Version 090401
   *