More improvements to the incomplete BluetoothHost demo - add Disconnection Event processing.

Remove unused macro in the host mode demos for the maximum Configuration Descriptor size.

Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c

@@ -28,11 +28,11 @@
   this software.
 */
 
-/*
+/** \file
-	Bluetooth Dongle host demo application.
+ *
-	
+ *  Main source file for the BluetoothHost demo. This file contains the main tasks of
-	** NOT CURRENTLY FUNCTIONAL - DO NOT USE **
+ *  the demo and is responsible for the initial application hardware configuration.
-*/
+ */
 
 #include "BluetoothHost.h"
 
@@ -43,23 +43,26 @@ Bluetooth_Device_t Bluetooth_DeviceConfiguration =
 		Name:    "LUFA Bluetooth Demo"
 	};
 
-
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
 int main(void)
 {
 	SetupHardware();
 
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
 	puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE));
 	
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
 	for (;;)
 	{
 		Bluetooth_Stack_Task();
-		Bluetooth_Management_Task();
+		Bluetooth_Host_Task();
 		USB_USBTask();
 	}
 }
 
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
 	/* Disable watchdog if enabled by bootloader/fuses */
@@ -75,26 +78,34 @@ void SetupHardware(void)
 	USB_Init();
 }
 
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
 void EVENT_USB_Host_DeviceAttached(void)
 {
 	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-
 	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 }
 
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
 void EVENT_USB_Host_DeviceUnattached(void)
 {
 	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 }
 
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
 void EVENT_USB_Host_DeviceEnumerationComplete(void)
 {
 	LEDs_SetAllLEDs(LEDMASK_USB_READY);
 }
 
-void EVENT_USB_Host_HostError(uint8_t ErrorCode)
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
 {
 	USB_ShutDown();
 
@@ -105,7 +116,10 @@ void EVENT_USB_Host_HostError(uint8_t ErrorCode)
 	for(;;);
 }
 
-void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
 {
 	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
 	                         " -- Error Code %d\r\n"
@@ -115,7 +129,8 @@ void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorC
 	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 }
 
-void Bluetooth_Management_Task(void)
+/** Task to set the configuration of the attached device after it has been enumerated. */
+void Bluetooth_Host_Task(void)
 {
 	uint8_t ErrorCode;
 
@@ -127,7 +142,7 @@ void Bluetooth_Management_Task(void)
 			/* Get and process the configuration descriptor data */
 			if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)
 			{
-				if (ErrorCode == ControlErrorDuringDeviceRead)
+				if (ErrorCode == DevControlError)
 				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
 				else
 				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
@@ -163,7 +178,7 @@ void Bluetooth_Management_Task(void)
 			/* Get and process the configuration descriptor data */
 			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
 			{
-				if (ErrorCode == ControlErrorDuringConfigRead)
+				if (ErrorCode == ControlError)
 				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
 				else
 				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h

@@ -28,6 +28,11 @@
   this software.
 */
 
+/** \file
+ *
+ *  Header file for BluetoothHost.c.
+ */
+
 #ifndef _BLUETOOTH_HOST_H_
 #define _BLUETOOTH_HOST_H_
 
@@ -62,19 +67,15 @@
 		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
 		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
 
-		#define BLUETOOTH_DATA_IN_PIPE          1
-		#define BLUETOOTH_DATA_OUT_PIPE         2
-		#define BLUETOOTH_EVENTS_PIPE           3
-
 	/* Task Definitions: */
-		void Bluetooth_Management_Task(void);
+		void Bluetooth_Host_Task(void);
 		
 	/* Event Handlers: */
 		void EVENT_USB_Host_DeviceAttached(void);
 		void EVENT_USB_Host_DeviceUnattached(void);
 		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-		void EVENT_USB_Host_HostError(uint8_t ErrorCode);
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
 
 	/* Function Prototypes: */
 		void SetupHardware(void);

Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c

@@ -28,8 +28,23 @@
   this software.
 */
 
+/** \file
+ *
+ *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
+ *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
+ *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
+ */
+
 #include "ConfigDescriptor.h"
 
+/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
+ *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
+ *  with compatible devices.
+ *
+ *  This routine searches for a BT interface descriptor containing bulk IN and OUT data endpoints.
+ *
+ *  \return An error code from the \ref Bluetooth_GetConfigDescriptorDataCodes_t enum.
+ */
 uint8_t ProcessConfigurationDescriptor(void)
 {
 	uint8_t  ConfigDescriptorData[512];
@@ -47,7 +62,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 		case HOST_GETCONFIG_BuffOverflow:
 			return DescriptorTooLarge;
 		default:
-			return ControlErrorDuringConfigRead;
+			return ControlError;
 	}
 	
 	/* The bluetooth USB transport addendum mandates that the data (not streaming voice) endpoints
@@ -56,7 +71,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	
 	/* Ensure that an interface was found, and the end of the descriptor was not reached */
 	if (!(CurrConfigBytesRem))
-	  return NoInterfaceFound;
+	  return NoBTInterfaceFound;
 
 	/* Get the data IN, data OUT and event notification endpoints for the bluetooth interface */
 	while (FoundEndpoints != ((1 << BLUETOOTH_DATA_IN_PIPE) | (1 << BLUETOOTH_DATA_OUT_PIPE) |
@@ -64,7 +79,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	{
 		/* Fetch the next endpoint from the current bluetooth interface */
 		if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              NextInterfaceBluetoothDataEndpoint))
+		                              DComp_NextInterfaceBluetoothDataEndpoint))
 		{
 			/* Descriptor not found, error out */
 			return NoEndpointFound;
@@ -118,7 +133,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	return SuccessfulConfigRead;
 }
 
-uint8_t NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor)
+uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor)
 {
 	/* PURPOSE: Find next interface endpoint descriptor before next interface descriptor */
 

Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h

@@ -28,6 +28,11 @@
   this software.
 */
 
+/** \file
+ *
+ *  Header file for ConfigDescriptor.c.
+ */
+
 #ifndef _CONFIGDESCRIPTOR_H_
 #define _CONFIGDESCRIPTOR_H_
 
@@ -36,23 +41,23 @@
 		
 		#include "BluetoothHost.h"
 
-	/* Macros: */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE       512
-
 	/* Enums: */
+		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum BluetoothHost_GetConfigDescriptorDataCodes_t
 		{
-			SuccessfulConfigRead                 = 0,
+			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlErrorDuringConfigRead         = 1,
+			DevControlError                 = 1, /**< A control request to the device failed to complete successfully */
-			InvalidConfigDataReturned            = 2,
+			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			DescriptorTooLarge                   = 3,
+			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoInterfaceFound                     = 4,
+			NoBTInterfaceFound              = 4, /**< A compatible Blutooth interface was not found in the device's Configuration Descriptor */
-			NoEndpointFound                      = 5,
+			NoEndpointFound                 = 5, /**< A compatible set of Bluetooth endpoints were not found in the
+			                                      *   device's Bluetooth interface
+			                                      */
 		};
 	
 	/* Function Prototypes: */
 		uint8_t ProcessConfigurationDescriptor(void);
 		
-		uint8_t NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor);
+		uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor);
 
 #endif

Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c

@@ -28,15 +28,28 @@
   this software.
 */
 
+/** \file
+ *
+ *  USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special 
+ *  computer-readable structures which the host requests upon device enumeration, to determine information about
+ *  the attached device.
+ */
+
 #include "DeviceDescriptor.h"
 
+/** Reads and processes an attached device's Device Descriptor, to determine compatibility
+ *
+ *  This routine checks to ensure that the attached device's class codes match those for Bluetooth devices.
+ *
+ *  \return An error code from the \ref BluetoothHost_GetDeviceDescriptorDataCodes_t enum.
+ */
 uint8_t ProcessDeviceDescriptor(void)
 {
 	USB_Descriptor_Device_t DeviceDescriptor;
 
 	/* Send the request to retrieve the device descriptor */
 	if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)
-	  return ControlErrorDuringDeviceRead;
+	  return DevControlError;
 	  
 	/* Validate returned data - ensure the returned data is a device descriptor */
 	if (DeviceDescriptor.Header.Type != DTYPE_Device)
@@ -47,7 +60,7 @@ uint8_t ProcessDeviceDescriptor(void)
 	    (DeviceDescriptor.SubClass != BLUETOOTH_DEVICE_SUBCLASS) ||
 	    (DeviceDescriptor.Protocol != BLUETOOTH_DEVICE_PROTOCOL))
 	{
-		return IncorrectDevice;
+		return IncorrectBTDevice;
 	}
 	
 	return SuccessfulDeviceRead;

Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h

@@ -28,6 +28,11 @@
   this software.
 */
 
+/** \file
+ *
+ *  Header file for DeviceDescriptor.c.
+ */
+
 #ifndef _DEVICEDESCRIPTOR_H_
 #define _DEVICEDESCRIPTOR_H_
 
@@ -37,17 +42,22 @@
 		#include "BluetoothHost.h"
 		
 	/* Macros: */
+		/** Device Class value for the Bluetooth Device class */
 		#define BLUETOOTH_DEVICE_CLASS           0xE0
+
+		/** Device Subclass value for the Bluetooth Device class */
 		#define BLUETOOTH_DEVICE_SUBCLASS        0x01
+
+		/** Device Protocol value for the Bluetooth Device class */
 		#define BLUETOOTH_DEVICE_PROTOCOL        0x01
 
 	/* Enums: */
 		enum BluetoothHost_GetDeviceDescriptorDataCodes_t
 		{
-			SuccessfulDeviceRead                 = 0,
+			SuccessfulDeviceRead            = 0, /**< Device Descriptor was processed successfully */
-			ControlErrorDuringDeviceRead         = 1,
+			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			InvalidDeviceDataReturned            = 2,
+			InvalidDeviceDataReturned       = 2, /**< The device returned an invalid Device Descriptor */
-			IncorrectDevice                      = 3,
+			IncorrectBTDevice               = 3, /**< The attached device is not a Bluetooth class device */
 		};
 
 	/* Function Prototypes: */

Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c

@@ -37,7 +37,6 @@ void Bluetooth_ProcessACLPackets(void)
 	Bluetooth_DataPacket_Header_t DataHeader;
 
 	Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE);
-	Pipe_SetPipeToken(PIPE_TOKEN_IN);
 	Pipe_Unfreeze();
 	
 	if (!(Pipe_IsReadWriteAllowed()))
@@ -49,11 +48,11 @@ void Bluetooth_ProcessACLPackets(void)
 	Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader));
 	Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader));
 
-	BT_DEBUG("(ACL) Packet Received", NULL);
+	BT_ACL_DEBUG("Packet Received", NULL);
-	BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader.ConnectionHandle);
+	BT_ACL_DEBUG("-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF));
-	BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader.DataLength);
+	BT_ACL_DEBUG("-- Data Length: 0x%04X", ACLPacketHeader.DataLength);
-	BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader.DestinationChannel);
+	BT_ACL_DEBUG("-- Destination Channel: 0x%04X", DataHeader.DestinationChannel);
-	BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader.PayloadLength);
+	BT_ACL_DEBUG("-- Payload Length: 0x%04X", DataHeader.PayloadLength);
 
 	if (DataHeader.DestinationChannel == BLUETOOTH_CHANNEL_SIGNALING)
 	{
@@ -69,14 +68,14 @@ void Bluetooth_ProcessACLPackets(void)
 				Bluetooth_ProcessSignalPacket_ConfigurationRequest(&ACLPacketHeader, &DataHeader, &SignalCommandHeader);
 				break;
 			case BLUETOOTH_SIGNAL_INFORMATION_REQUEST:
-				BT_DEBUG("(ACL) -- Information Request, Discarded", NULL);
+				BT_ACL_DEBUG(">> Information Request, Discarded", NULL);
 
 				Pipe_Discard_Stream(ACLPacketHeader.DataLength);
 				Pipe_ClearIN();		
 				Pipe_Freeze();
 				break;
 			default:
-				BT_DEBUG("(ACL) >> Unknown Signaling Command 0x%02X", SignalCommandHeader.Code);
+				BT_ACL_DEBUG(">> Unknown Signaling Command 0x%02X", SignalCommandHeader.Code);
 					
 				Pipe_Discard_Stream(ACLPacketHeader.DataLength);
 				Pipe_ClearIN();		
@@ -90,10 +89,10 @@ void Bluetooth_ProcessACLPackets(void)
 		Pipe_Read_Stream_LE(&DataPayload, sizeof(DataPayload));
 		DataHeader.PayloadLength = 0;
 	
-		BT_DEBUG("(ACL) -- Data Payload: ", NULL);
+		BT_ACL_DEBUG("-- Data Payload: ", NULL);
 		for (uint16_t B = 0; B < sizeof(DataPayload); B++)
 		  printf("0x%02X ", DataPayload[B]);
-		BT_DEBUG("", NULL);
+		printf("\r\n");
 
 		Pipe_Discard_Stream(ACLPacketHeader.DataLength);
 		Pipe_ClearIN();		
@@ -109,14 +108,13 @@ static inline void Bluetooth_ProcessSignalPacket_ConnectionRequest(Bluetooth_ACL
 	
 	Pipe_Read_Stream_LE(&ConnectionRequest, sizeof(ConnectionRequest));
 
-	BT_DEBUG("(ACL) >> L2CAP Connection Request", NULL);
+	BT_ACL_DEBUG(">> L2CAP Connection Request", NULL);
-	BT_DEBUG("(ACL) -- PSM: 0x%04X", ConnectionRequest.PSM);
+	BT_ACL_DEBUG("-- PSM: 0x%04X", ConnectionRequest.PSM);
-	BT_DEBUG("(ACL) -- Source Channel: 0x%04X", ConnectionRequest.SourceChannel);
+	BT_ACL_DEBUG("-- Source Channel: 0x%04X", ConnectionRequest.SourceChannel);
 	
 	Pipe_ClearIN();
 	Pipe_Freeze();
 	Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE);
-	Pipe_SetPipeToken(PIPE_TOKEN_OUT);
 	Pipe_Unfreeze();
 	
 	Bluetooth_SignalCommand_ConnectionResponse_t ConnectionResponse;
@@ -143,14 +141,14 @@ static inline void Bluetooth_ProcessSignalPacket_ConnectionRequest(Bluetooth_ACL
 	Pipe_ClearOUT();		
 	Pipe_Freeze();
 	
-	BT_DEBUG("(ACL) Packet Sent", NULL);
+	BT_ACL_DEBUG("Packet Sent", NULL);
-	BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader->ConnectionHandle);
+	BT_ACL_DEBUG("-- Connection Handle: 0x%04X", (ACLPacketHeader->ConnectionHandle & 0x0FFF));
-	BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader->DataLength);
+	BT_ACL_DEBUG("-- Data Length: 0x%04X", ACLPacketHeader->DataLength);
-	BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
+	BT_ACL_DEBUG("-- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
-	BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader->PayloadLength);			
+	BT_ACL_DEBUG("-- Payload Length: 0x%04X", DataHeader->PayloadLength);			
-	BT_DEBUG("(ACL) >> L2CAP Connection Response", NULL);
+	BT_ACL_DEBUG(">> L2CAP Connection Response", NULL);
-	BT_DEBUG("(ACL) -- Source Channel: 0x%04X", ConnectionResponse.SourceChannel);
+	BT_ACL_DEBUG("-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel);
-	BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel);
+	BT_ACL_DEBUG("-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel);
 }
 
 static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ACL_Header_t* ACLPacketHeader,
@@ -161,13 +159,12 @@ static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_
 	
 	Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest));
 
-	BT_DEBUG("(ACL) >> L2CAP Configuration Request", NULL);
+	BT_ACL_DEBUG(">> L2CAP Configuration Request", NULL);
-	BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel);
+	BT_ACL_DEBUG("-- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel);
 	
 	Pipe_ClearIN();
 	Pipe_Freeze();
 	Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE);
-	Pipe_SetPipeToken(PIPE_TOKEN_OUT);
 	Pipe_Unfreeze();
 	
 	Bluetooth_SignalCommand_ConfigurationResponse_t ConfigurationResponse;
@@ -197,10 +194,10 @@ static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_
 	Pipe_ClearOUT();		
 	Pipe_Freeze();
 	
-	BT_DEBUG("(ACL) Packet Sent", NULL);
+	BT_ACL_DEBUG("Packet Sent", NULL);
-	BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader->ConnectionHandle);
+	BT_ACL_DEBUG("-- Connection Handle: 0x%04X", (ACLPacketHeader->ConnectionHandle & 0x0FFF));
-	BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader->DataLength);
+	BT_ACL_DEBUG("-- Data Length: 0x%04X", ACLPacketHeader->DataLength);
-	BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
+	BT_ACL_DEBUG("-- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
-	BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader->PayloadLength);			
+	BT_ACL_DEBUG("-- Payload Length: 0x%04X", DataHeader->PayloadLength);			
-	BT_DEBUG("(ACL) >> L2CAP Configuration Response", NULL);
+	BT_ACL_DEBUG(">> L2CAP Configuration Response", NULL);
 }

Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h

@@ -41,6 +41,8 @@
 		#include "BluetoothStack.h"
 		
 	/* Macros: */
+		#define BT_ACL_DEBUG(s, ...)                     printf_P(PSTR("(ACL) " s "\r\n"), __VA_ARGS__)
+
 		#define BLUETOOTH_CHANNEL_SIGNALING              0x0001
 		#define BLUETOOTH_CHANNEL_CONNECTIONLESS         0x0002
 		

Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c

@@ -31,14 +31,14 @@
 #include "BluetoothHCICommands.h"
 
 static Bluetooth_HCICommand_Header_t HCICommandHeader;
-static   Bluetooth_HCIEvent_Header_t   HCIEventHeader;
 
        uint8_t                       Bluetooth_HCIProcessingState;
-		 uint8_t                       Bluetooth_HCINextState;
+static uint8_t                       Bluetooth_HCINextState;
 static uint8_t                       Bluetooth_TempDeviceAddress[6];
 
-static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength)
+static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength)
 {
+	/* Need to reserve the amount of bytes given in the header for the complete payload */
 	uint8_t CommandBuffer[sizeof(HCICommandHeader) + HCICommandHeader.ParameterLength];
 
 	USB_ControlRequest = (USB_Request_Header_t)
@@ -50,11 +50,15 @@ static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength)
 			.wLength       = sizeof(CommandBuffer)
 		};
 
-	memset(CommandBuffer, 0x00, sizeof(CommandBuffer));
+	/* Copy over the HCI command header to the allocated buffer */
 	memcpy(CommandBuffer, &HCICommandHeader, sizeof(HCICommandHeader));
 	
-	if (ParamLength)
+	/* Zero out the parameter section of the response to ensure that any padding bytes do not expose private RAM contents */
-	  memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParamLength);
+	memset(&CommandBuffer[sizeof(HCICommandHeader)], 0x00, HCICommandHeader.ParameterLength);
+
+	/* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes
+	   may differ to those in the header; any difference in length is filled with 0x00 padding bytes */
+	memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParameterLength);
 	
 	Pipe_SelectPipe(PIPE_CONTROLPIPE);
 	return USB_Host_SendControlRequest(CommandBuffer);
@@ -62,8 +66,6 @@ static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength)
 
 void Bluetooth_ProcessHCICommands(void)
 {
-	uint8_t ErrorCode;
-
 	switch (Bluetooth_HCIProcessingState)
 	{
 		case Bluetooth_ProcessEvents:
@@ -72,68 +74,87 @@ void Bluetooth_ProcessHCICommands(void)
 			
 			if (Pipe_IsReadWriteAllowed())
 			{
+				Bluetooth_HCIEvent_Header_t HCIEventHeader;
+
+				/* Read in the event header to fetch the event code and payload length */
 				Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader));
 				
+				/* Create a temporary buffer for the event parameters */
 				uint8_t EventParams[HCIEventHeader.ParameterLength];
 
+				/* Read in the event parameters into the temporary buffer */
 				Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength);
 				Pipe_ClearIN();
 
-				BT_DEBUG("(HCI) Event Code: 0x%02X", HCIEventHeader.EventCode);
+				BT_HCI_DEBUG("Event Code: 0x%02X", HCIEventHeader.EventCode);
 				
 				switch (HCIEventHeader.EventCode)
 				{
 					case EVENT_COMMAND_COMPLETE:
 						Bluetooth_HCIProcessingState = Bluetooth_HCINextState;
 
-						BT_DEBUG("(HCI) >> Command Complete (Opcode 0x%04x)", 
+						BT_HCI_DEBUG(">> Command Complete (Opcode 0x%04x)", 
 						         ((Bluetooth_HCIEvent_CommandComplete_t*)&EventParams)->Opcode);
 						break;
 					case EVENT_COMMAND_STATUS:
+						/* If the execution of a command failed, reset the stack */
 						if (((Bluetooth_HCIEvent_CommandStatus_t*)&EventParams)->Status)
 						  Bluetooth_HCIProcessingState = Bluetooth_Init;
 
-						BT_DEBUG("(HCI) >> Command Status: 0x%02X",
+						BT_HCI_DEBUG(">> Command Status: 0x%02X",
 						         ((Bluetooth_HCIEvent_CommandStatus_t*)&EventParams)->Status);					
 						break;
 					case EVENT_CONNECTION_REQUEST:
+						/* Need to store the remote device's BT address in a temporary buffer for later use */
 						memcpy(Bluetooth_TempDeviceAddress,
 						       &((Bluetooth_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress,
 						       sizeof(Bluetooth_TempDeviceAddress));
 					
+						/* Only accept the connection if it is a ACL (data) connection */
 						Bluetooth_HCIProcessingState = (Bluetooth_Connection.IsConnected ||
 						                               (((Bluetooth_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType != 0x01)) ?
 													   Bluetooth_Conn_RejectConnection : Bluetooth_Conn_AcceptConnection;
 
-						BT_DEBUG("(HCI) >> Connection Request from Device %02X:%02X:%02X:%02X:%02X:%02X",
+						BT_HCI_DEBUG(">> Connection Request from Device %02X:%02X:%02X:%02X:%02X:%02X",
 								 Bluetooth_TempDeviceAddress[5], Bluetooth_TempDeviceAddress[4], Bluetooth_TempDeviceAddress[3],
 								 Bluetooth_TempDeviceAddress[2], Bluetooth_TempDeviceAddress[1], Bluetooth_TempDeviceAddress[0]);
 						break;
 					case EVENT_PIN_CODE_REQUEST:
+						/* Need to store the remote device's BT address in a temporary buffer for later use */
 						memcpy(Bluetooth_TempDeviceAddress,
 						       &((Bluetooth_HCIEvent_PinCodeRequest_t*)&EventParams)->RemoteAddress,
 						       sizeof(Bluetooth_TempDeviceAddress));
 
 						Bluetooth_HCIProcessingState = Bluetooth_Conn_SendPINCode;
 
-						BT_DEBUG("(HCI) >> PIN Request from Device %02X:%02X:%02X:%02X:%02X:%02X", 
+						BT_HCI_DEBUG(">> PIN Request from Device %02X:%02X:%02X:%02X:%02X:%02X", 
 								 Bluetooth_TempDeviceAddress[5], Bluetooth_TempDeviceAddress[4], Bluetooth_TempDeviceAddress[3],
 								 Bluetooth_TempDeviceAddress[2], Bluetooth_TempDeviceAddress[1], Bluetooth_TempDeviceAddress[0]);
 						break;
 					case EVENT_CONNECTION_COMPLETE:
+						/* Need to store the remote device's BT address in a temporary buffer for later use */
 						memcpy(Bluetooth_Connection.RemoteAddress,
 						       &((Bluetooth_HCIEvent_ConnectionComplete_t*)&EventParams)->RemoteAddress,
 						       sizeof(Bluetooth_TempDeviceAddress));
 
+						/* Store the created connection handle and indicate that the connection has been established */
 						Bluetooth_Connection.ConnectionHandle = ((Bluetooth_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle;
 						Bluetooth_Connection.IsConnected      = true;
 
-						BT_DEBUG("(HCI) >> Connection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X, Handle 0x%04x", 
+						BT_HCI_DEBUG(">> Connection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X, Handle 0x%04x", 
 								 Bluetooth_Connection.RemoteAddress[5], Bluetooth_Connection.RemoteAddress[4],
 								 Bluetooth_Connection.RemoteAddress[3], Bluetooth_Connection.RemoteAddress[2],
 								 Bluetooth_Connection.RemoteAddress[1], Bluetooth_Connection.RemoteAddress[0],
 								 Bluetooth_Connection.ConnectionHandle);
 						break;
+					case EVENT_DISCONNECTION_COMPLETE:
+						BT_HCI_DEBUG(">> Disconnection Complete", NULL);
+
+						/* Device disconnected, indicate connection information no longer valid */
+						Bluetooth_Connection.IsConnected = false;
+						
+						Bluetooth_HCIProcessingState = Bluetooth_Init;
+						break;					
 				}
 			}
 			
@@ -141,6 +162,7 @@ void Bluetooth_ProcessHCICommands(void)
 			
 			break;
 		case Bluetooth_Init:
+			/* Reset the connection information structure to destroy any previous connection state */
 			memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection));
 
 			Bluetooth_HCIProcessingState = Bluetooth_Init_Reset; 
@@ -152,23 +174,10 @@ void Bluetooth_ProcessHCICommands(void)
 				ParameterLength: 0,
 			};
 			
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Init_Reset", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Init_Reset", NULL);
 
-			ErrorCode = Bluetooth_SendHCICommand(NULL, 0);
+			/* Send the command to reset the bluetooth dongle controller */
-			
+			Bluetooth_SendHCICommand(NULL, 0);
-			Bluetooth_HCINextState       = Bluetooth_Init_ReadBufferSize;
-			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
-			break;
-		case Bluetooth_Init_ReadBufferSize:
-			HCICommandHeader = (Bluetooth_HCICommand_Header_t)
-			{
-				OpCode: {OGF: OGF_CTRLR_INFORMATIONAL, OCF: OGF_CTRLR_INFORMATIONAL_READBUFFERSIZE},
-				ParameterLength: 0,
-			};
-		
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Init_ReadBufferSize", NULL);
-
-			ErrorCode = Bluetooth_SendHCICommand(NULL, 0);
 			
 			Bluetooth_HCINextState       = Bluetooth_Init_SetLocalName;
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -180,10 +189,11 @@ void Bluetooth_ProcessHCICommands(void)
 					ParameterLength: 248,
 				};
 
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetLocalName", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Init_SetLocalName", NULL);
-			BT_DEBUG("(HCI)  -- Name: %s", Bluetooth_DeviceConfiguration.Name);
+			BT_HCI_DEBUG("-- Name: %s", Bluetooth_DeviceConfiguration.Name);
 
-			ErrorCode = Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
+			/* Send the command to set the bluetooth dongle's name for other devices to see */
+			Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
 
 			Bluetooth_HCINextState       = Bluetooth_Init_SetDeviceClass;
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -195,9 +205,10 @@ void Bluetooth_ProcessHCICommands(void)
 					ParameterLength: 3,
 				};
 
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetDeviceClass", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Init_SetDeviceClass", NULL);
 
-			ErrorCode = Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3);
+			/* Send the command to set the class of the device for other devices to see */
+			Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3);
 
 			Bluetooth_HCINextState       = Bluetooth_Init_WriteScanEnable;
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -209,10 +220,12 @@ void Bluetooth_ProcessHCICommands(void)
 				ParameterLength: 1,
 			};
 			
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Init_WriteScanEnable", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Init_WriteScanEnable", NULL);
 
-			uint8_t Interval = InquiryAndPageScans;
+			uint8_t Interval = BT_SCANMODE_InquiryAndPageScans;
-			ErrorCode = Bluetooth_SendHCICommand(&Interval, 1);
+			
+			/* Send the command to set the remote device scanning mode */
+			Bluetooth_SendHCICommand(&Interval, 1);
 			
 			Bluetooth_HCINextState       = Bluetooth_ProcessEvents;
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -224,14 +237,17 @@ void Bluetooth_ProcessHCICommands(void)
 					ParameterLength: sizeof(Bluetooth_HCICommand_AcceptConnectionRequest_t),
 				};
 			
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_AcceptConnection", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Conn_AcceptConnection", NULL);
 
+			/* Copy over the temporary BT device address saved from the Connection Request event, indicate slave
+			   connection role */
 			Bluetooth_HCICommand_AcceptConnectionRequest_t AcceptConnectionParams;
-
+			memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress,
-			memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(Bluetooth_TempDeviceAddress));
+			       sizeof(AcceptConnectionParams.RemoteAddress));
 			AcceptConnectionParams.SlaveRole = true;
 
-			ErrorCode = Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(AcceptConnectionParams));
+			/* Send the command to accept the remote connection request */
+			Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(Bluetooth_HCICommand_AcceptConnectionRequest_t));
 			
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
 			break;
@@ -242,14 +258,16 @@ void Bluetooth_ProcessHCICommands(void)
 					ParameterLength: sizeof(Bluetooth_HCICommand_RejectConnectionRequest_t),
 				};
 			
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_RejectConnection", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Conn_RejectConnection", NULL);
 
+			/* Copy over the temporary BT device address saved from the Connection Request event, indicate failure
+			   to accept the connection due to limited device resources */
 			Bluetooth_HCICommand_RejectConnectionRequest_t RejectConnectionParams;
-
 			memcpy(RejectConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(RejectConnectionParams.RemoteAddress));
 			RejectConnectionParams.Reason = ERROR_LIMITED_RESOURCES;
 
-			ErrorCode = Bluetooth_SendHCICommand(&RejectConnectionParams, sizeof(RejectConnectionParams));
+			/* Send the command to reject the remote connection request */
+			Bluetooth_SendHCICommand(&RejectConnectionParams, sizeof(Bluetooth_HCICommand_RejectConnectionRequest_t));
 		
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
 			break;
@@ -260,16 +278,18 @@ void Bluetooth_ProcessHCICommands(void)
 					ParameterLength: sizeof(Bluetooth_HCICommand_PinCodeResponse_t),
 				};
 			
-			BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_SendPINCode", NULL);
+			BT_HCI_DEBUG("Enter State: Bluetooth_Conn_SendPINCode", NULL);
-			BT_DEBUG("(HCI) -- PIN: %s", Bluetooth_DeviceConfiguration.PINCode);
+			BT_HCI_DEBUG("-- PIN: %s", Bluetooth_DeviceConfiguration.PINCode);
 
+			/* Copy over the temporary BT device address saved from the PIN Code Request event, copy over the
+			   local PIN authentication code to the response */
 			Bluetooth_HCICommand_PinCodeResponse_t PINCodeRequestParams;
-		
+			memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(PINCodeRequestParams.RemoteAddress));
-			memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(Bluetooth_TempDeviceAddress));
 			PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode);
 			memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode));
 			
-			ErrorCode = Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(PINCodeRequestParams));
+			/* Send the command to transmit the device's local PIN number for authentication */
+			Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(Bluetooth_HCICommand_PinCodeResponse_t));
 
 			Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
 			break;

Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h

@@ -42,6 +42,8 @@
 		#include "BluetoothClassCodes.h"
 
 	/* Macros: */
+		#define BT_HCI_DEBUG(s, ...)                           printf_P(PSTR("(HCI) " s "\r\n"), __VA_ARGS__)
+	
 		#define OGF_LINK_CONTROL                               0x01
 		#define OGF_CTRLR_BASEBAND                             0x03
 		#define OGF_CTRLR_INFORMATIONAL                        0x04
@@ -164,10 +166,10 @@
 	/* Enums: */
 		enum Bluetooth_ScanEnable_Modes_t
 		{
-			NoScansEnabled            = 0,
+			BT_SCANMODE_NoScansEnabled       = 0,
-			InquiryScanOnly           = 1,
+			BT_SCANMODE_InquiryScanOnly      = 1,
-			PageScanOnly              = 2,
+			BT_SCANMODE_PageScanOnly         = 2,
-			InquiryAndPageScans       = 3,
+			BT_SCANMODE_InquiryAndPageScans  = 3,
 		};
 
 		enum BluetoothStack_States_t
@@ -175,13 +177,12 @@
 			Bluetooth_ProcessEvents          = 0,
 			Bluetooth_Init                   = 1,
 			Bluetooth_Init_Reset             = 2,
-			Bluetooth_Init_ReadBufferSize             = 3,
+			Bluetooth_Init_SetLocalName      = 3,
-			Bluetooth_Init_SetLocalName               = 4,
+			Bluetooth_Init_SetDeviceClass    = 4,
-			Bluetooth_Init_SetDeviceClass             = 5,
+			Bluetooth_Init_WriteScanEnable   = 5,
-			Bluetooth_Init_WriteScanEnable            = 6,
+			Bluetooth_Conn_AcceptConnection  = 6,
-			Bluetooth_Conn_AcceptConnection           = 7,
+			Bluetooth_Conn_RejectConnection  = 7,
-			Bluetooth_Conn_RejectConnection           = 8,
+			Bluetooth_Conn_SendPINCode       = 8,
-			Bluetooth_Conn_SendPINCode                = 9,
 		};
 		
 	/* External Variables: */
@@ -192,7 +193,7 @@
 		void Bluetooth_ProcessHCIEvents(void);
 
 		#if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C)
-			static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength);
+			static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength);
 		#endif
 		
 #endif

Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h

@@ -39,14 +39,16 @@
 		#include "BluetoothACLPackets.h"
 		
 	/* Macros: */
+		#define BLUETOOTH_DATA_IN_PIPE   1
+		#define BLUETOOTH_DATA_OUT_PIPE  2
+		#define BLUETOOTH_EVENTS_PIPE    3
+
 		#define BLUETOOTH_MAX_OPEN_CHANNELS              2
 		#define BLUETOOTH_CHANNELNUMBER_BASEOFFSET       0x0040
 		
 		#define CHANNEL_LOOKUP_BY_SOURCE                 true
 		#define CHANNEL_LOOKUP_BY_DESTINATION            false
 		
-		#define BT_DEBUG(s, ...)                         printf_P(PSTR(s "\r\n"), __VA_ARGS__)
-	
 	/* Enums: */
 		enum Bluetooth_Channel_State_t
 		{

Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h

@@ -45,9 +45,6 @@
 		/** Interface Class value for the Human Interface Device class */
 		#define HID_CLASS                   0x03
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE  512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum GenericHIDHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h

@@ -48,9 +48,6 @@
 		/** Interface Protocol value for a Boot Protocol Mouse compliant device */
 		#define JOYSTICK_PROTOCOL           0x02
 
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE  512
-
 		/** Descriptor header type constant for a HID descriptor */
 		#define DTYPE_HID                   0x21
 

Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h

@@ -48,9 +48,6 @@
 		/** Interface Protocol value for a Boot Protocol Keyboard compliant device */
 		#define KEYBOARD_PROTOCOL              0x01
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum KeyboardHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h

@@ -48,9 +48,6 @@
 		/** Interface Protocol value for a Boot Protocol Keyboard compliant device */
 		#define KEYBOARD_PROTOCOL              0x01
 
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-
 		/** Descriptor header type constant for a HID descriptor */
 		#define DTYPE_HID                      0x21
 

Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h

@@ -51,9 +51,6 @@
 		/** Interface Class value for the MIDI Audio Streaming protocol */
 		#define MIDI_STREAMING_PROTOCOL        0x00
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum MIDIHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h

@@ -51,9 +51,6 @@
 		/** Interface Protocol value for the Bulk Only transport protocol */
 		#define MASS_STORE_PROTOCOL            0x50
 
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum MassStorageHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h

@@ -48,9 +48,6 @@
 		/** Interface Protocol value for a Boot Protocol Mouse compliant device */
 		#define MOUSE_PROTOCOL              0x02
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE  512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum MouseHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h

@@ -48,9 +48,6 @@
 		/** Interface Protocol value for a Boot Protocol Mouse compliant device */
 		#define MOUSE_PROTOCOL              0x02
 		
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE  512
-
 		/** Descriptor header type constant for a HID descriptor */
 		#define DTYPE_HID                   0x21
 

Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h

@@ -47,9 +47,6 @@
 		/** Interface Protocol value for a Bidirectional communication encapsulation */
 		#define PRINTER_PROTOCOL                 0x02
 
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE       512
-
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum PrinterHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h

@@ -60,9 +60,6 @@
 		/** Interface Class value for the CDC data protocol */
 		#define CDC_DATA_PROTOCOL              0x00
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum RNDISHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h

@@ -51,9 +51,6 @@
 		/** Interface Class value for the Still Image Device protocol */
 		#define SIMAGE_PROTOCOL                0x01
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum StillImageHost_GetConfigDescriptorDataCodes_t

Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h

@@ -60,9 +60,6 @@
 		/** Interface Class value for the CDC data protocol */
 		#define CDC_DATA_PROTOCOL              0x00
 	
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE     512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum CDCHost_GetConfigDescriptorDataCodes_t

Projects/MissileLauncher/ConfigDescriptor.h

@@ -45,9 +45,6 @@
 		/** Interface Class value for the Human Interface Device class */
 		#define HID_CLASS                 0x03
 
-		/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
-		#define MAX_CONFIG_DESCRIPTOR_SIZE  512
-	
 	/* Enums: */
 		/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
 		enum GenericHIDHost_GetConfigDescriptorDataCodes_t