Dean Camera
046fff2aff
Fix broken Endpoint/Pipe stream templates.
...
Simplify AudioOutput demos, to reduce the number of cycles needed to process each incomming sample.
2009-10-04 07:57:15 +00:00
Dean Camera
433399b05d
Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer samples to and from the device (allowing more time for processing and output).
...
Fixed ClassDriver AudioOutput demo not selecting an audio output mode.
2009-10-03 07:59:32 +00:00
Dean Camera
b7eead83aa
Cleanups to the Device mode Mass Storage demo applications' SCSI routines.
2009-10-02 07:40:24 +00:00
Dean Camera
89c837ee34
Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.
...
MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.
Added beginnings of a MIDI class bootloader.
2009-09-30 04:40:36 +00:00
Dean Camera
849b9535e7
Add new error condition to the HID Report Parser for when a report is parsed but no unfiltered items are encountered (i.e. nothing of interest in the device report). Make all host HID "WithParser" demos print the new error condition.
2009-09-22 08:07:48 +00:00
Dean Camera
576f40f5ae
Move Dataflash operational checking code out from SCSI.c into the DataflashManager.c in the Device mode Mass Storage demos.
2009-09-22 07:53:57 +00:00
Dean Camera
93b24a25df
Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael from DirectAid.ca).
2009-09-13 08:29:31 +00:00
Dean Camera
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
2009-09-09 13:17:04 +00:00
Dean Camera
331929833d
Add Host mode Class driver demo summaries.
2009-09-09 04:22:49 +00:00
Dean Camera
7882da1ed8
Remove information about 64 bit Windows OS signing requirements for the CDC based demos -- apparently the native CDC driver can be installed without first disabling the OS's driver signing requirements.
2009-09-07 08:11:17 +00:00
Dean Camera
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
2009-09-06 05:58:40 +00:00
Dean Camera
f6700c0ea5
Added 64 bit OS driver installation instructions to the readme for all CDC based projects.
2009-09-06 04:22:46 +00:00
Dean Camera
064e6a2f32
Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.
...
CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).
The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
2009-09-06 04:15:35 +00:00
Dean Camera
bda4bd4501
Move check for devices not supporting internal serials in demos which make use of USE_INTERNAL_SERIAL to Descriptors.c from Descriptors.h so that the warning is only generated at most once per compilation.
2009-09-01 11:16:57 +00:00
Dean Camera
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
2009-08-30 06:52:03 +00:00
Dean Camera
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
2009-08-23 08:37:11 +00:00
Dean Camera
fa8beef82d
Moved out the handling of V2 Protocol parameters to a seperate set of files. Added parameter privellages, so that an error can be returned to the host when trying to perform a get/set value action on a parameter without the correct privellages.
2009-08-19 08:29:08 +00:00
Dean Camera
3a85962f94
Fix USBtoSerial device demos -- ensure the UDR1 register contents is read in under all circumstances which fire the ISR, so that the receive complete interrupt is cleared correctly to prevent freezes.
2009-08-16 10:57:47 +00:00
Dean Camera
b71ff7c8cd
Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
2009-08-16 08:51:54 +00:00
Dean Camera
25ddbb9e3b
Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.
2009-08-13 08:26:59 +00:00
Dean Camera
99abd1a8b7
Added explicit attribute masks to the device mode demos' descriptors.
2009-08-13 08:14:16 +00:00
Dean Camera
d423090b26
Cleanups to RNDIS device demos. Fix issue in RNDIS demos where the memory would become corrupted due to an incorrect bounds check when iterating over the port state table, causing random resets.
...
Revert change to Template_Endpoint_Control_R.c, which broke control stream reads.
Remove uneeded ADC.h include in the class driver AudioOutput demo.
2009-08-07 06:55:31 +00:00
Dean Camera
33a5715e91
Simplify CDC device demos, by directly assigning the string to transmit to the pointer, rather than using an intermediatary table to hold all the possible transmit strings.
2009-08-06 14:30:53 +00:00
Dean Camera
99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
2009-08-05 13:16:36 +00:00
Dean Camera
4421782b7f
Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.
...
Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.
Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
2009-08-05 11:39:28 +00:00
Dean Camera
a9d5e129b7
Changed over manual loops waiting for endpoints to be ready to use the library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.
2009-08-05 09:37:45 +00:00
Dean Camera
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
2009-08-05 06:36:31 +00:00
Dean Camera
357ccc577b
Better fix for LowLevel CDC demo issue where sending data before the line encoding is set will cause a failure of the host to open the port. Added fix to the DualCDC and USBtoSerial LowLevel demos.
2009-08-04 08:36:30 +00:00
Dean Camera
eff07bb877
Fix issue with CDC device demos causing broken communications when the device tries to send data before the host has set the line encoding.
2009-08-04 08:06:26 +00:00
Dean Camera
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
2009-08-02 23:14:30 +00:00
Dean Camera
bbf89d81fa
Make both LowLevel and ClassDriver AudioOutput demos always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS compile time option from the demo). This allows for positive feedback to the user of audio activity regardless of output mode.
2009-08-02 11:43:16 +00:00
Dean Camera
ac593611c9
Fixed the ClassDriver GenericHID demo so that it echoes back reports as indicated in the demo overview.
2009-07-31 03:35:24 +00:00
Dean Camera
41babf1cb7
Fix incorrect configuration in the ClassDriver AudioOutput demo.
...
Make all audio device Class Driver functions require a reference to the Audio class instance, so that the endpoint size can be checked (and to standardize the APIs).
Make LEDs more responsive in the AudioOutput device demos.
2009-07-30 14:06:52 +00:00
Dean Camera
41b54a2acd
Set all CDC and MassStorage device mode demos (LowLevel and ClassDriver) to use the USE_INTERNAL_SERIAL feature, add compile time warnings for devices which do not have an internal serial.
2009-07-30 11:03:58 +00:00
Dean Camera
ce3ea6fb25
Added standard stream example to the ClassDriver CDC device demo.
...
Fix incorrect HWB button mask in the STK526 Buttons driver.
2009-07-30 10:54:57 +00:00
Dean Camera
bb05712efe
Added 404 errors to the RNDIS Webserver example.
2009-07-29 01:40:42 +00:00
Dean Camera
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
2009-07-28 13:53:52 +00:00
Dean Camera
23c1653efe
Make LowLevel AudioOutput demo work in the same way as the ClassDriver AudioOutput demo for LEDs output.
2009-07-28 10:49:33 +00:00
Dean Camera
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
2009-07-28 10:46:20 +00:00
Dean Camera
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
Dean Camera
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
2009-07-21 04:46:48 +00:00
Dean Camera
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
2009-07-21 02:48:41 +00:00
Dean Camera
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
2009-07-20 14:07:02 +00:00
Dean Camera
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
2009-07-16 08:15:27 +00:00
Dean Camera
f85a53a31b
Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces.
...
Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman).
Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.
2009-07-15 05:49:19 +00:00
Dean Camera
73d9fafc0f
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
2009-07-13 12:38:30 +00:00
Dean Camera
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
2009-07-13 06:44:14 +00:00
Dean Camera
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
2009-07-11 15:05:56 +00:00
Dean Camera
b462f2d457
Minor correction to MagStripe demo to fix build problems.
2009-06-29 11:11:51 +00:00
Dean Camera
86e6ed7f31
Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards.
...
Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index.
Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.
2009-06-29 09:30:06 +00:00
