Dean Camera
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
2009-08-31 07:48:32 +00:00
Dean Camera
8711dc7ced
Fix issue in CDC device class driver where received data the size of the data endpoint could lock up the driver.
...
Further work on the new CDC and HID host mode class drivers.
Reset changelog et. al. to reset development information for the new version currently under development.
2009-08-11 01:52:15 +00:00
Dean Camera
c830fcb0e1
Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.
...
Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
2009-08-06 14:22:04 +00:00
Dean Camera
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
2009-08-05 06:36:31 +00:00
Dean Camera
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
2009-08-02 23:14:30 +00:00
Dean Camera
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
2009-07-27 23:19:17 +00:00
Dean Camera
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
2009-07-27 10:55:21 +00:00
Dean Camera
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
2009-07-27 10:48:55 +00:00
Dean Camera
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
2009-07-27 10:31:07 +00:00
Dean Camera
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
2009-07-26 10:45:33 +00:00
Dean Camera
44179abcf8
Add PrinterHost demo to the documentation.
2009-07-21 10:29:56 +00:00
Dean Camera
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
2009-07-21 02:48:41 +00:00
Dean Camera
cf313989e6
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
2009-07-19 13:17:38 +00:00
Dean Camera
cc879df4f0
Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.
2009-07-19 13:08:48 +00:00
Dean Camera
1756087c3e
Optimize vendor/product description string display code in MassStorageHost.
...
Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.
Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.
Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
2009-06-26 09:58:43 +00:00
Dean Camera
0d8679cf6b
Re-add in simple scheduler for compatibility with legacy code, mark all scheduler related files as deprecated.
2009-06-19 03:21:03 +00:00
Dean Camera
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
2009-06-18 10:31:55 +00:00
Dean Camera
b7049da11b
Enhanced class drivers to use the same public/private section seperations as other portions of the library.
2009-06-15 04:38:42 +00:00
Dean Camera
afe6ae1402
Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.
...
Split out common defines/types from class drivers into a seperate common class driver directory.
Make central USB Class driver dispatch headers, used for both device and host modes.
2009-06-14 15:55:13 +00:00
Dean Camera
0323e13b39
Copy over schedulerless host demos to ClassDrivers directory, for later modification to new Host mode USB class drivers.
2009-06-09 04:30:12 +00:00
Dean Camera
34f6e0dd33
Deleted Host ClassDriver demos -- not yet started, faster to rebase new ClassDriver demos from the newly schedulerless LowLevel host demos rather than re-convert each demo from the previous scheduler-based implementations.
...
Fixes to MassStorageHost demo to improve compatibility with more USB drives.
2009-06-09 04:27:53 +00:00
Dean Camera
f1199200e1
Copy existing Host mode demos to new ClassDriver and LowLevel subfolders.
2009-06-05 07:56:39 +00:00
