68e777e16b
Prevent written but unused variable warnings on GCC 4.6 with dummy reads.
2011-10-09 12:54:50 +00:00
a4d67bb6ff
USB XMEGA support improvements; add DFLL clock platform support, ensure the endpoint table is correctly aligned and configured in the USB controller.
2011-10-07 05:52:35 +00:00
6553bf5bfb
Fix incorrect function call name in USB_Host_SendControlRequest() for AVR8 devices.
2011-10-07 04:38:53 +00:00
2ae41fb153
Added endian-correction to the CDC driver's Line Encoding control request handlers.
2011-10-07 03:47:42 +00:00
3bb8055459
Fix compile errors for the USB XMEGA parts when the USB driver is used.
...
Add core support for the ATXMEGA64A1U.
Minor documentation corrections.
2011-10-04 11:40:55 +00:00
3223786c49
Fix compile error on the UC3 targets when INTERRUPT_CONTROL_ENDPOINT compile time option is used (thanks to Ian Woloschin).
...
Small size improvement for Little Endian devices when USB host mode is used.
Minor documentation fixes.
2011-09-28 13:24:08 +00:00
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
2011-09-22 05:55:32 +00:00
022fa26b43
Fix missing C++ linkage command in ArchitectureSpecific.h.
...
Fix missing closing brace in an Endpoint function for the UC3 targets.
2011-09-21 23:40:05 +00:00
b5682f2c44
Add project name to the Doxygen makefile target output.
2011-09-21 06:45:09 +00:00
99ff27e403
Fixed HID Parser's largest report size bit count not including the size of the last parsed report item.
...
Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255.
2011-09-17 13:07:21 +00:00
4b229cb5ef
Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was NULL (which should be allowable according to the API).
...
Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer.
2011-09-07 10:18:49 +00:00
94e0a0058a
Oops - restore conditional calls to USB_USBTask() in the Mass Storage class driver for the non-stream loops.
2011-09-05 22:22:19 +00:00
e64f4b0cd9
Update the TempDataLogger project and driver documentation to use the new TWI_BITLENGTH_FROM_FREQ() macro.
2011-09-02 04:41:43 +00:00
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
2011-09-02 04:38:56 +00:00
88d022a752
Make TWI_ReadPacket() use a repeated start condition rather than a full bus release/recapture after the read address has been sent.
...
Fix TWI_ReadPacket() not releasing the bus correctly after all data transferred.
Make TWI_SendByte() and TWI_ReceiveByte() non-inline to reduce compiled binary size.
2011-08-31 07:17:33 +00:00
dc9133ad21
Move documentation for the USB_HOST_TIMEOUT_MS into the HostStandardReq module where it is used.
2011-08-28 03:44:22 +00:00
3b898ae178
Remove redundant prototype for Audio_Host_StartStopStreaming() and Audio_Host_GetSetEndpointProperty(). Update host mode Audio class inline functions to prevent unused parameter warnings.
2011-08-28 01:40:36 +00:00
a233109909
Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, and not a Pipe within the host.
...
Updated MS_Host_ResetMSInterface() to now perform a full Mass Storage reset sequence to prevent data corruption in the event of a device lock up or timeout (thanks to David Lyons).
Add parenthesis around the library Endianness macros that do nothing on a particular architecture to prevent operator precedence issues depending on usage.
Minor documentation corrections.
2011-08-24 09:50:21 +00:00
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
2011-08-23 10:39:04 +00:00
2d9f98b592
Add multiple axis support to the HID joystick report in the HID_DESCRIPTOR_JOYSTICK() macro.
2011-08-23 07:07:34 +00:00
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
2011-08-22 13:03:56 +00:00
af725dd418
Fix TWI peripheral driver example code in the library documentation.
2011-08-19 04:11:38 +00:00
9708b45e69
Minor documentation corrections.
2011-08-17 14:51:05 +00:00
ddae47979d
Update LUFAConfig.h with missing options for the AVR32 target.
...
Add Binary Page Mode fuse command bytes to the AT45DB642D.h Dataflash header.
2011-08-04 05:32:17 +00:00
40728fd20d
Remove redundant calls to USB_USBTask() in the Mass Storage Device Class driver when INTERRUPT_CONTROL_ENDPOINT is not used, as this is done inside the stream callbacks.
...
Fix implementations of Endpoint_SetEndpointDirection() and Endpoint_GetEndpointDirection() for the AVR8 architecture.
2011-07-29 08:12:00 +00:00
d5e874d348
Add INTERRUPT_CONTROL_ENDPOINT compile time option support for the UC3 devices.
2011-07-25 09:56:21 +00:00
5c274d106b
Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used.
...
Remove old unused function prototype in the LowLevel MassStorage device demo.
2011-07-25 01:11:24 +00:00
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
2011-07-19 07:02:19 +00:00
2c404e5af5
Add support for the ORDERED_EP_CONFIG compile time token on the UC3 architecture.
2011-07-19 02:42:27 +00:00
69243c5071
Move out the EP_TYPE_* macros to the base USBController.h header, as these are used in the device descriptors as well and thus must not be changed.
2011-07-19 02:15:36 +00:00
69ab85cbc0
More USB XMEGA porting for Endpoint control.
2011-07-18 07:03:47 +00:00
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
2011-07-15 08:46:08 +00:00
a36012fc4b
Add option to the USB XMEGAs to set the USB bus interrupt priority level.
2011-07-15 08:29:25 +00:00
f07e766755
Complete USB XMEGA interrupt control subsystem code in the core USB driver.
...
Automatically load in the USB calibration bytes from the User Signature Row on start-up.
Create internal SRAM variable for the endpoint control and status register table, used by the XMEGA USB controller hardware.
2011-07-15 08:10:51 +00:00
ffa8b430c1
Complete initial revision of the XMEGA Clock Management platform driver.
...
Start the USB clock source generator inside USB_ResetInterface() for XMEGA devices.
2011-07-14 11:31:12 +00:00
77a9df36a7
Update UC3 platform driver support to use the bitmasks defined in the header files over raw constants.
...
Start implementation of XMEGA platform drivers.
2011-07-14 08:30:33 +00:00
b971dbbce8
More XMEGA USB AVR device port work - re-add missing Endpoint stream functions, remove unnecessary internal functions.
2011-07-14 07:28:32 +00:00
8629e1918c
Implementation of several key core USB driver functions for the new USB XMEGA devices.
2011-07-14 07:19:30 +00:00
6490d1c443
Correct the maximum banks per endpoint information macros for the UC3A3 and UC3A4 devices.
2011-07-14 07:18:31 +00:00
bc41cbd26d
Add support for triple endpoint/pipe bank AVR32 UC3 devices.
2011-07-14 05:38:32 +00:00
7c3290607e
Add missing ENDPOINT_DETAILS_EP7 macro for the UC3A3/UC3A4 devices.
...
MultiArchDemos: Correct usage of updated INTC_RegisterGroupHandler() in the ported demos.
2011-07-14 05:27:50 +00:00
3f38ea6317
Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t.
2011-07-14 03:18:30 +00:00
f4528c4aef
Add high speed USB support for the UC3 devices containing a high speed USB controller.
...
Add device support preprocessor checks and use symbolic bit names in the UC3 platform clock management driver.
2011-07-14 02:58:07 +00:00
d9643cf6ec
Add start of an architecture port to the Atmel USB XMEGA devices.
2011-07-13 23:50:05 +00:00
f580232392
Remove unneeded #include of Device.h in StdDescriptors.h breaking compilation for some user projects.
2011-07-13 07:23:07 +00:00
bd8046976f
Minor documentation fixes.
2011-07-12 10:11:52 +00:00
fdb82cd1e8
Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices.
2011-07-12 07:22:36 +00:00
04287b76c5
Add more missing function attributes to the TWI peripheral driver.
...
Fix incorrect standard request name in the host standard request driver.
2011-07-12 05:18:10 +00:00
7207b05695
Add missing function attributes.
2011-07-12 05:13:31 +00:00
065ed4da20
Added new USB_Host_GetDeviceStatus() function for USB Host mode.
2011-07-12 04:52:21 +00:00
f152ff26c7
Add missing function attributes to the RingBuffer driver to reduce the chances of invalid usage.
...
Fix duplicated LED driver functions in the Doxygen documentation.
2011-07-11 11:16:57 +00:00
c029d72b94
More endianness porting of the LUFA host mode class drivers.
2011-07-11 10:44:34 +00:00
85e85befc4
More endianness porting of the LUFA device mode class drivers.
...
Add endianness information to the class driver and core structure definitions.
Move out the unused Ethernet_Frame_Info_t structure definition to the RNDIS device demos where it is needed.
2011-07-11 09:50:54 +00:00
d771b1ff8f
Oops - re-order Ringbuffer.h inline functions to prevent compile errors due to forward references.
2011-07-11 09:42:13 +00:00
87ea060afe
Added new RingBuffer_GetFreeCount() function to the library miscellaneous RingBuffer driver.
2011-07-11 05:51:35 +00:00
6c4f736793
Minor documentation and style fixes.
2011-07-11 05:51:04 +00:00
137ce280c1
Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration instead of manual host state machine manipulations in the main application task.
...
Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device.
Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, by changing the USB_* prefix to USB_Device_* or USB_Host_*.
Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required.
Altered the USB_Host_SetDeviceConfiguration() function to update the new USB_Host_ConfigurationNumber global as required.
Moved out the Host mode standard request convenience/helper functions from the architecture specific Host driver files to the architecture agnostic HostStandardReq.c driver file.
2011-07-08 07:25:56 +00:00
4e601207a7
Tighten up the implementations of the USB_Device_SetDeviceAddress(), USB_Controller_Reset() and USB_PLL_On() functions for the AVR8 devices.
...
Minor corrections to the documentation of the USB_Control_Request_t enum.
2011-07-06 02:50:08 +00:00
87b57522b2
Fix improper indenting of the internal board driver dispatch headers.
...
Slight improvements to the ADC peripheral driver example in the manual.
2011-07-06 02:12:09 +00:00
9ea22ebf41
Fix HID_Host_SetIdlePeriod() function to send the correct request type to the device, remove reference to unavailable (and not needed) local variable.
2011-07-05 00:28:35 +00:00
5b06886dab
Add missing function parameter to the new HID_Host_SetIdlePeriod() function.
2011-07-04 09:22:40 +00:00
258381e760
Add missing function parameter to the new HID_Host_SetIdlePeriod() function.
2011-07-04 09:22:02 +00:00
61861c548e
Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver.
2011-07-04 09:18:50 +00:00
c6a7a028bd
Merge over core library changes from the MultiArchDemos branch.
2011-06-29 05:57:29 +00:00
8c3d421a01
Added board hardware driver support for the EVK1104 board.
...
Fix inverted LEDs_GetLEDs() result for the EVK1100 and EVK1101 boards.
2011-06-27 13:41:06 +00:00
8cc3fd56d9
Add board driver support for the EVK1100 board.
2011-06-27 13:22:37 +00:00
5d7827a573
Minor internal macro renaming for the UC3 devices.
2011-06-20 13:08:27 +00:00
d784baaa3a
Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time option was not enabled on the AVR8s.
...
Add C++ compatibility to some header files currently missing extern "C" linkage.
2011-06-20 04:32:34 +00:00
bb0b761c65
Make the HID Report Parser Get/Set Report Item routines fail if a NULL pointer to a report item is given.
...
Minor visual enhancement to the HIDReportViewer project.
2011-06-20 01:57:22 +00:00
a7dd984446
Code style fixes for the Device mode USB Audio Class driver to make it more in line with the style of the other library Device Class drivers.
2011-06-19 04:48:49 +00:00
bad956bace
Fix TWI driver documentation example (thanks to Jerome Colombie).
2011-06-18 08:04:25 +00:00
0ec2b55a7c
Add missing SVN eol-style properties to source files to prevent mixed end-of-line characters.
2011-06-16 12:18:46 +00:00
f10126a95e
Added new \ref SPI_GetCurrentMode() function to the SPI peripheral driver.
2011-06-16 07:23:37 +00:00
d8fe01f19a
Rename new Audio class driver functions, callbacks and events to ensure that they contain the USB mode (Device or Host) in the function names.
2011-06-16 06:49:08 +00:00
21a012a018
Add macro guards to the templated C files to prevent compile errors if they are mistakenly compiled as regular source files in a LUFA project.
2011-06-14 12:54:46 +00:00
f1cfd7ea7d
Rename Audio Host Class driver internal descriptor matching routines to be in line with the rest of the class driver function names.
2011-06-14 12:44:41 +00:00
deaab90089
Ensure that only the requested Audio class pipes are mapped to endpoints within the device for a specific Audio Host Class driver instance.
...
Fix const-correctness of the Audio Host Class driver.
2011-06-13 00:19:40 +00:00
6e0a26083a
Fix bugs in the Host mode Audio class driver.
2011-06-12 13:59:03 +00:00
6e2a3174a5
Fix errors in the library Host mode Audio Class driver.
2011-06-09 08:00:19 +00:00
e5e34f91fa
Fix compile errors when both Host and Device modes are enabled.
2011-06-09 04:32:52 +00:00
1f1d0710f3
Add new Audio Class Driver Host demos.
...
Fix errors in the new Audio Host mode Class Driver, which would have prevented data from being sent or received properly by the device.
Add microphone/square wave generation compile time switch to the Low Level AudioOutput Host demo.
2011-06-09 04:08:03 +00:00
0bf5064aec
Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction as part of the endpoint address.
...
Add Audio_GetSetEndpointProperty() function to the Host mode Audio class driver.
2011-06-08 02:45:32 +00:00
34164a5550
Remove warnings in the documentation for the library class drivers about sequential pipe/endpoint allocation, as by default this is no longer as issue (unless ORDERED_EP_CONFIG is specified).
2011-06-08 01:32:44 +00:00
e572ee7ff2
Added new Host mode Audio Class driver.
...
Added new EVENT_Audio_StreamStartStopChange() event to the Audio Device Class driver to detect stream start/stop events.
2011-06-08 01:26:52 +00:00
605ef921cc
Fix compile errors when compiling for the AVR32 UC3 target.
2011-06-08 00:25:20 +00:00
2e76ad721e
Partial commit: Rename USBFOO LED driver to fix capitalisation of file name, which will cause issues on *nix systems.
2011-06-08 00:25:03 +00:00
73733275be
Partial commit: Rename USBFOO LED driver to fix capitalisation of file name, which will cause issues on *nix systems.
2011-06-08 00:24:01 +00:00
567f7ecce0
Fix errors in the Audio device demos and class driver regarding multiple sample frequency support.
2011-06-07 02:05:19 +00:00
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
2011-06-05 13:55:56 +00:00
3bd6336075
Added board driver support for the Busware TUL board.
2011-06-04 04:13:01 +00:00
2731c3a8ae
Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates.
...
Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates.
Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed.
Fix broken LowLevel audio demo descriptors.
Minor documentation fixes.
2011-06-03 07:56:12 +00:00
f01a05415c
Spell check library source code files.
2011-06-01 14:33:40 +00:00
6d2a08f1b7
Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2.
...
Minor documentation cleanups.
Modify the incomplete AudioInputHost demo for mono audio output.
2011-06-01 14:10:35 +00:00
68468e0aea
Added new incomplete AudioOutputHost Host LowLevel demo.
2011-05-30 11:36:21 +00:00
2a26efc691
Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or continuous sample rates.
2011-05-30 11:07:57 +00:00
ea922c98d1
Added new incomplete AudioInputHost Host LowLevel demo.
...
Added missing Audio class control request definitions.
Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
2011-05-29 12:41:14 +00:00
cc9b190919
Add new USB_Host_SetInterfaceAltSetting() convenience function.
2011-05-27 07:33:58 +00:00
6e7fc21a94
Fix incorrect macro guard in the UC3 EndpointStream header file.
...
Fix incorrect project name in the Projects/ folder makefile.
2011-05-26 11:37:40 +00:00
1ea5dae8a8
Copy out the EndpointStream and PipeStream functions to each architecture, so that each architecture can optimise the stream functions according to the available hardware (such as DMA, where available).
2011-05-26 11:27:21 +00:00
e349974aa9
Fix broken Doxygen documentation.
2011-05-19 13:32:55 +00:00
9d733d44b4
Add new RNDIS_Host_IsPacketReceived(), RNDIS_Device_ReadPacket() and RNDIS_Device_WritePacket() functions to the Device RNDIS Class Driver.
...
Modify RNDIS demos to suit the simplified Ethernet_Frame_Info_t structure.
2011-05-18 14:33:34 +00:00
41de1d1dab
Oops - fix bad include path in the moved USBKEY Dataflash board driver header.
2011-05-18 12:24:56 +00:00
910bca557c
Seperated out board drivers by architecture in the library internals for better organisation.
2011-05-18 12:23:24 +00:00
049e930963
Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device.
...
Minor code cleanups to add const and reformat where missing, as well as abstract out the internal device signature start address into a macro, so that it can be altered to suit particular devices within a single architecture if needed.
Add missing documentation to the USB_Device_States_t enum.
2011-05-14 02:17:58 +00:00
7d3150423d
Add new USE_LUFA_CONFIG_HEADER compile time option.
...
Add missing LEDS_ToggleLEDs() function to the LED driver for the EVK1101 board.
2011-05-09 14:04:40 +00:00
a85fa30bf1
Minor documentation fixes.
2011-05-08 14:30:36 +00:00
f670bdeff8
Add __VA_ARGS__ support to the LUFA supplied ISR macro. Add proper result typecasting to the SWAPENDIAN_* macros.
...
Switch to using -1 on the UC3 target to obtain a register mask with all bits set (for clearing interrupts and status flags).
Fix incorrect USB controller mode on the UC3 when a fixed mode is specified as a compile time option due to AVR32_USBB.USBCON.uide being set by default.
Make USB_Descriptor_String_t use a uint16_t for Unicode strings on all targets except the AVR8 (retained for backwards compatibility).
2011-04-25 07:28:36 +00:00
2b0c9532a3
Fix reversed descriptions for the AVR8 USB pad regulator enable/disable masks (thanks to Omar).
2011-04-20 06:04:49 +00:00
e0852408de
Replace cast-as-char* byte access of multibyte variables with proper shifts and masks to preserve endianness across different architectures.
2011-04-13 06:12:52 +00:00
995195a2b0
Add missing function attributes to the pipe/endpoint functions for all architectures.
...
Perform endianness correction in the HID report parser for big-endian platforms.
2011-04-12 03:03:56 +00:00
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
2011-04-10 06:43:02 +00:00
c263ea837a
Move global interrupt enable/disable functions out to Common.h and document them.
2011-04-08 05:40:25 +00:00
de9bd767dc
Correct UC3 global interrupt functions.
...
Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.
Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.
2011-04-08 05:05:05 +00:00
70284d390f
Add in a new common Delay_MS() function, which provides a blocking delay for all architectures.
...
Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.
Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.
2011-04-08 04:49:20 +00:00
0c5afda7e8
Oops - fix misnamed function call in Pipe_Discard_Stream().
2011-04-04 15:41:26 +00:00
96a2da1813
Oops - fix incorrect variable name in the updated Pipe_Write_8() function.
2011-04-04 15:25:30 +00:00
899df7d331
Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
...
Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
2011-04-04 12:52:30 +00:00
2efa79d3ec
Conditionally add available address spaces to the address space enum, for multiple address space architectures.
...
Update Doxygen configuration file for the latest Doxygen release.
Minor documentation updates.
2011-04-04 10:24:57 +00:00
06d00bb99b
Ensure the library builds cleanly in device mode for architectures lacking multiple address spaces.
2011-03-27 22:17:26 +00:00
fa5c8700bc
Fix corner case in the HID report descriptor Mouse/Joystick tempates at the 8/16 bit boundary.
2011-03-23 09:25:13 +00:00
f595043584
Add in new architecture attribute defines to selectively remove the EEPROM and FLASH memory space functions on architectures which do not have seperate memory address spaces.
2011-03-21 11:10:02 +00:00
aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
2011-03-21 10:20:42 +00:00
f6f4ac588c
Fix bugs in the new VirtualSerialMassStorage demo (thanks to Martin Degelsegger).
2011-03-16 22:54:31 +00:00
b47374caf5
Fix incorrectly named include guards in the Board driver header files.
2011-03-16 06:00:02 +00:00
fe62770a1e
Added new VirtualSerialMassStorage Device Class Driver demo.
2011-03-16 05:58:58 +00:00
5eb1862d54
Remove redundant Doxygen guards from the internal preprocessor definitions.
2011-03-15 09:22:39 +00:00
134e018b21
Fixed Remote Wakeup broken on the AVRs due to the mechanism only operating when the SUSPI bit is set (thanks to Holger Steinhaus).
...
Remove redundant setting of UIDE in the AVR8 and AVR32 USB controller drivers.
2011-03-15 08:07:29 +00:00
95a1aa4c01
Add named macros to the board joystick drivers where a shift is needed to maintain unique joystick direction bits in the returned mask value.
2011-03-15 06:51:50 +00:00
b35f93a372
Implemented on-demand PLL clock generation for the U4, U6 and U7 series USB AVRs when automatic PLL mode is specified.
2011-03-15 06:39:34 +00:00
0111fb515d
Oops - fix internal serial number extraction routine for the AVR8 architecture.
2011-03-14 00:24:14 +00:00
ea361a0d30
Correct Endpoint/Pipe maximum constants for the AVR32 UC3 models.
2011-03-14 00:03:30 +00:00
02dfd7dc3d
Simplify the internal serial extraction routines for each architecture.
2011-03-13 23:32:32 +00:00
a7eca42996
Add experimental support for the AVR32 UC3A4 microcontrollers.
...
Add support for the inbuilt unique serial numbers in the UC3A3 and UC3A4 models.
2011-03-13 22:42:08 +00:00
81fd8d4004
Re-add accidentally deleted Host_UC3.c and Host_UC3.h files.
2011-03-13 22:02:07 +00:00
944e0d2009
Rename UC3B driver files to UC3, as they are generic to all AVR32 UC3 models.
2011-03-13 21:53:19 +00:00
6005a42150
Add experimental support for the UC3A0, UC3A1 and UC3A3 series AVR32 microcontrollers.
2011-03-13 21:25:05 +00:00
13e2f71f15
Simplify AVR32 UC3B software FIFO, as it will only ever be accessed a byte at a time to prevent data alignment issues.
2011-03-11 07:03:34 +00:00
c8a438d66c
Add structure padding to the appropriate descriptor structures to maintain correct alignments on larger architectures.
...
Fix EVK1101 swapped joystick Right/Down masks.
2011-03-11 06:47:39 +00:00
e4b3e3fc65
Fix UC3B architecture compile errors and ensure the architecture can be compiled with no special makefile tokens defined.
2011-03-05 16:36:57 +00:00
8b13f7f89a
Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name.
...
Fix undefined error in Pipe_UC3B.h.
Add missing migration notes.
2011-03-05 16:30:57 +00:00
1e3d892b6a
Add software FIFOs to the UC3B pipe control interfaces, to match the endpoint control interfaces. Fix incorrect endianness for the Endpoint/Pipe read and write routines.
2011-03-05 12:13:35 +00:00
b763c3f33e
Porting updates for the UC3B architecture - get UC3B partially enumerating using a modified mouse demo on the EVK1101. Implement a software FIFO for the endpoint banks; datasheet hints that this can be done through hardware as on the AVR8 architecture, but the correct method to do this not discovered yet.
2011-03-05 11:34:04 +00:00
c1c94fe5a0
Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe) is found.
...
Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine.
2011-03-03 19:32:27 +00:00
8c6f26e19d
Add in USB_INT_RegisterHandlers() internal function to register the interrupt handler routines used by LUFA. Add dummy loads after clearing the interrupt lines according to the datasheet.
...
Add in temporary global interrupts enable/disable macros.
2011-02-28 22:30:40 +00:00
86a2be8536
Fix EVK1101 board joystick driver movement masks.
2011-02-27 23:05:46 +00:00
29ba88cffd
Add code to start the USBB Generic Clock from the user-specified master clock source (OSCx or PLLx) in the AVR32 UC3B core USB driver.
2011-02-27 22:06:31 +00:00
c79f6e2586
Oops - ensure that only the relevant/available interrupts are defined and used on each architecture.
...
Make all USB driver headers include USBMode.h first, to ensure that the relevant USB mode macros are defined.
2011-02-27 20:38:47 +00:00
04526d284d
Changed over the AVR8 USB controller interrupt management macros to be inlined functions instead, for better compile-time validity checking and to keep the per-architecture source files as uniform as possible.
2011-02-27 20:00:15 +00:00
92b3553a07
General cleanup and more port work to the AVR32 UC3B.
2011-02-27 18:25:29 +00:00
4a3b70e727
Fix USB Host mode compile errors for the UC3B architecture.
2011-02-27 15:23:09 +00:00
Dean Camera