e6dc951630
Add new HID_DESCRIPTOR_VENDOR() macro, change over all projects and Device ClassDriver demos to use it.
...
Fix reversed byte ordering of multi-byte HID data.
Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index.
Removed the HID_IOF_NON_VOLATILE and HID_IOF_VOLATILE flags from HID INPUT items where the flag is invalid. Changed over HID OUTPUT items to use HID_IOF_NON_VOLATILE.
Change over MagStripe project to use HID_DESCRIPTOR_KEYBOARD() for its HID report. Change over MouseHostDevice demo to use HID_DESCRIPTOR_MOUSE() for its HID report.
2011-01-30 14:14:04 +00:00
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
2011-01-26 21:33:07 +00:00
32830a2b82
Added new ADC_GET_CHANNEL_MASK() convenience macro to the ADC driver.
2011-01-16 16:13:22 +00:00
70d55f6e0c
Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.
...
Spell check source code files.
2011-01-13 22:56:49 +00:00
154f934b22
Call USB_USBTask() in the Endpoint stream functions between packets if INTERRUPT_CONTROL_ENDPOINT is not set. Remove calls to USB_USBTask in the Mass Storage class driver stream read/write continuation checks, since this is now done inside the stream function.
2011-01-10 18:56:34 +00:00
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
2011-01-10 18:43:34 +00:00
7dc3d3a68f
Minor documentation improvements.
2011-01-08 11:47:20 +00:00
1d433d4506
Update copyright year on all source files.
2011-01-01 13:00:56 +00:00
bfa622d27e
Much more efficient algorithm for the Endpoint/Pipe configuration routine of unordered endpoints/pipes - only reconfigure the endpoints and pipes above the newly configured endpoint/pipe, and don't cache existing endpoint/pipe configuration before use to save SRAM.
2010-12-24 18:06:55 +00:00
ec537fd84d
Re-add in old Endpoint/Pipe workaround for unordered pipes - add new ORDERED_EP_CONFIG compile time option to override the workaround and use the previous behaviour that imposes correct Endpoint/Pipe ordering but produces smaller compiled code.
2010-12-24 17:05:41 +00:00
46f2e488b0
Oops - typos in the naming of the NBUSYBK0 bits breaking the new busy bank counting functions.
2010-10-29 06:50:56 +00:00
cd57e855f6
Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions.
2010-10-29 06:22:03 +00:00
b8dfa976ce
Added standard keyboard HID report scancode defines (thanks to László Monda).
2010-10-28 23:11:49 +00:00
b120c4e4cd
Move RNDISConstants.h into the RNDIS class driver common definition header.
...
Add logical grouping of related #define values for better Doxygen documentation.
2010-10-28 07:52:52 +00:00
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
2010-10-28 06:08:58 +00:00
8f3bee7d86
Better algorithm to extract and convert the internal device serial number into a string descriptor (if present).
...
Fix incorrect warning text when an unsuitable F_CLOCK value is given.
2010-10-24 12:25:34 +00:00
9464fa168e
Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for the given endpoint.
2010-10-13 21:05:55 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
a8871c7fba
Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured.
...
Small documentation improvements to explicitly reference tokens in Doxygen, to ensure that they are converted to cross-reference links in the output files.
2010-10-12 13:52:06 +00:00
7aaced1e8b
Remove USB_MODE_* macros, replace with a semantically linked USB_Modes_t enum.
...
Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic.
Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run.
Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().
2010-10-12 12:22:11 +00:00
292a631b62
Added new NO_SOF_EVENTS compile time option, enabled in the bootloaders to reduce the compiled binary size.
2010-10-07 11:55:20 +00:00
3ae9e6042f
Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.
2010-10-06 10:16:02 +00:00
d06febbb59
Fix device mode for the U4 parts.
2010-10-01 11:22:24 +00:00
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
2010-09-30 06:23:38 +00:00
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
2010-09-29 13:56:52 +00:00
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
2010-09-24 06:34:43 +00:00
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
2010-09-22 04:20:45 +00:00
c459ef6981
Oops - need to call USB_Attach() when reinitializing into USB Host mode, or no devices will be detected.
2010-09-21 14:06:39 +00:00
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
2010-09-21 10:48:38 +00:00
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
2010-09-19 08:42:30 +00:00
d66a925786
Make device mode configure the control endpoint even before the bus has been reset, so that the device will enumerate correctly on hosts that do not reset the device before initial use.
2010-09-19 06:30:14 +00:00
b17e87d140
More simplifications to USBController.c, fix errors and warnings when compiled for the series 2 USB AVRs.
2010-09-19 06:09:25 +00:00
1621158c62
Fix warning when not compiled for UID auto-selection mode.
2010-09-19 06:00:45 +00:00
e7e1c21bc5
Clean up USBController.c/.h to more clearly seperate out host and device setup and reset paths.
...
Make USBInterrupt.c process all pending USB host mode interrupts before resetting the bus, so that no interrupts are lost when in UID auto-selection mode.
2010-09-19 05:58:27 +00:00
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
2010-09-19 05:46:17 +00:00
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
2010-09-15 13:11:28 +00:00
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
2010-09-13 11:39:41 +00:00
6e011f88d9
Must save and restore the endpoint/pipe interrupt enable flags during reconfiguration of all endpoints/pipes in the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() routines.
2010-09-07 03:07:40 +00:00
ebdb1b37ca
Fix bug in Pipe_ConfigurePipe() breaking already configured pipes that was accidentally clearing the pipe's IN mode.
2010-09-05 08:24:56 +00:00
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
2010-09-05 07:11:53 +00:00
0174d8ea70
Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode, as some devices will drop off the USB bus if no connection is made within a timeout period.
2010-09-04 10:17:09 +00:00
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
2010-09-03 09:57:31 +00:00
cd4c10fefa
Better documentation for the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() functions.
2010-08-24 13:57:55 +00:00
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
2010-08-24 13:02:38 +00:00
ed8ad18f26
Fix Doxygen typos in Device.h.
2010-08-24 11:47:53 +00:00
f6e1eaba75
Optimise Endpoint_ConfigureEndpoint_Prv() function to produce smaller code when CONTROL_ONLY_DEVICE compile time token is defined.
2010-08-22 13:54:51 +00:00
e72f424f64
Split out endpoint and pipe stream functions into new EndpointStream.c/.h and PipeStream.c/.h files.
2010-08-22 13:31:27 +00:00
81998ce297
Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
2010-08-22 01:42:09 +00:00
95079868bb
Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger).
2010-08-20 12:13:19 +00:00
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
2010-08-09 10:20:10 +00:00
Dean Camera