5ca1d7bf8f
Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does not support USB host mode.
2009-07-30 07:45:36 +00:00
bb05712efe
Added 404 errors to the RNDIS Webserver example.
2009-07-29 01:40:42 +00:00
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
2009-07-28 13:53:52 +00:00
23c1653efe
Make LowLevel AudioOutput demo work in the same way as the ClassDriver AudioOutput demo for LEDs output.
2009-07-28 10:49:33 +00:00
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
2009-07-28 10:46:20 +00:00
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
2009-07-27 23:19:17 +00:00
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
2009-07-23 10:39:10 +00:00
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
2009-07-23 08:00:12 +00:00
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
2009-07-21 04:46:48 +00:00
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
2009-07-21 02:48:41 +00:00
bf50959b80
Simplify SideShow GUID compares via a macro.
2009-07-20 14:51:19 +00:00
86819ba9d8
Fixes to unfinished SideShow demo to re-enable correct building after previous commit.
2009-07-20 14:27:14 +00:00
292fc9b65e
Move unfinished SideShow source files to nested Lib directory for clarity.
2009-07-20 14:23:47 +00:00
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
2009-07-20 14:07:02 +00:00
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
2009-07-16 15:00:10 +00:00
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
2009-07-16 08:15:27 +00:00
f85a53a31b
Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces.
...
Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman).
Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.
2009-07-15 05:49:19 +00:00
312748702a
Added better module summaries.
2009-07-14 07:33:06 +00:00
73d9fafc0f
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
2009-07-13 12:38:30 +00:00
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
2009-07-13 06:44:14 +00:00
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
2009-07-11 15:05:56 +00:00
b462f2d457
Minor correction to MagStripe demo to fix build problems.
2009-06-29 11:11:51 +00:00
86e6ed7f31
Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards.
...
Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index.
Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.
2009-06-29 09:30:06 +00:00
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
2009-06-28 13:39:08 +00:00
3cbdcd3686
Reduce struct name pollution - group typedef struct names by class driver name where appropriate.
2009-06-26 11:43:56 +00:00
bb23e55f11
Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.
2009-06-23 08:45:46 +00:00
189d0c7e66
Add demos/bootloaders/projects overview to the manual.
2009-06-22 11:32:51 +00:00
730624f745
Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.
2009-06-21 09:22:31 +00:00
00d0883507
Added USE_INTERNAL_SERIAL compile time option to automatically read out the internal unique serial number as the device's serial number descriptor on supported AVR models.
2009-06-20 11:43:26 +00:00
35bdada24b
Clean up RNDIS demo type define names.
2009-06-19 07:29:02 +00:00
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
2009-06-19 05:08:04 +00:00
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
2009-06-19 04:34:35 +00:00
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
2009-06-18 10:31:55 +00:00
2b21a1552d
Remove hardcoded DOT path from all Doxygen config files.
...
Better documentation for the MissleLauncher project - add credit to PyLauncher project.
2009-06-16 13:50:02 +00:00
dcf303762a
Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors.
...
Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
2009-06-16 07:17:22 +00:00
39d07c3da0
Added USB Missle Launcher project, submitted by Dave Fletcher.
2009-06-16 05:53:27 +00:00
c75f8bf223
More Doxygen fixes - ensure no undocumented function parameters.
2009-06-15 08:36:12 +00:00
234d0a39eb
Doxygen corrections to fix Doxygen warnings in some demos.
2009-06-15 07:23:14 +00:00
afe6ae1402
Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.
...
Split out common defines/types from class drivers into a seperate common class driver directory.
Make central USB Class driver dispatch headers, used for both device and host modes.
2009-06-14 15:55:13 +00:00
4d3a594f3e
Changed per-device controller preprocessor checks over to per-device series for better device control.
...
Fixed error in Endpoint.c using HSOFI rather than SOFI for counting elapsed milliseconds.
2009-06-14 07:44:02 +00:00
9798440ca4
Changed to new device mode Class Driver function name prefixes to make way for similar host mode Class drivers.
2009-06-11 06:15:45 +00:00
b2330934b9
Some minor whitespace corrections.
2009-06-11 01:52:53 +00:00
6be24e4404
Fixes to the MIDI device demos (ClassDriver, LowLevel); discard unused read-in events from the host, use standard MIDI event structure in low level demo rather than sending individual bytes.
2009-06-10 05:03:45 +00:00
e6881fd166
Error status LEDs shown when device endpoint configuration fails to complete.
...
MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready.
2009-06-08 07:46:07 +00:00
33a0184749
Converted device mode low-level demos to schedulerless.
2009-06-07 07:20:33 +00:00
2793c88fc6
Add master device Host demo makefile.
...
Copy and convert incomplete Bluetooth Host demo to the library.
2009-06-05 08:13:19 +00:00
f51017f8fb
Conversion of old incomplete SideShow demo to new APIs.
2009-06-05 07:52:53 +00:00
bf041e8bbf
Add new Incomplete device subdirectory for work-in-progress demos. Add incomplete SideShow demo.
2009-06-05 07:32:40 +00:00
dd2cc7eda7
Remove outdated AVRStudio project files from demos, projects, bootloaders. Fix makefiles of ClassDriver device demos.
2009-06-05 07:30:23 +00:00
Dean Camera