7ace314cc1
Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.
...
Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.
Minor code cleanups (remove redundant comments, fix spacing, etc.).
2009-12-09 00:50:55 +00:00
2281750b5f
Make sure that USB_STREAM_TIMEOUT_MS is set in the MassStorageHost ClassDriver demo, so that slow devices don't time out the data pipe. Increase pipe timeout in both MassStorageHost demos to 5 seconds to account for the really slow devices.
...
Fix TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting the AVR.
2009-12-08 07:43:33 +00:00
c1fa230618
Add new USB_Host_GetDeviceStringDescriptor() convenience function.
2009-12-06 13:37:30 +00:00
c49bdcb7c9
Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a STALL to a GET MAX LUN request (thanks to Martin Luxen).
2009-12-04 09:08:48 +00:00
478d9dc04f
Added support for the Atmel EVK527 board hardware.
2009-12-04 06:02:28 +00:00
2919aeeaab
Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items.
...
Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype.
Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values.
2009-12-04 01:06:26 +00:00
258a6a0177
Fix the tokens which enable and disable the different programming protocols in the AVRISP project.
2009-12-03 09:12:36 +00:00
bae00a3d42
Added support for the Dataflash mounted on the XPLAIN board. Added new XPLAIN_REV1 board target for the first revision XPLAIN board, which used a different (smaller) Dataflash IC to later revisions.
2009-12-03 08:59:12 +00:00
a5adbae652
Document the PDI programming routines implemented so far in the AVRISP project. Add ability to selectively disable ISP programming support in addition to the existing ability to disable PDI programming support.
2009-12-03 07:42:56 +00:00
fec31947a6
Removed John Steggall's software UART code from the XPLAIN Bridge project due to reliability issues.
2009-12-02 14:03:57 +00:00
1b2cd16976
Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device.
2009-11-30 02:20:26 +00:00
b7f6a65c25
Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2.
...
Simplified the USB.h master include file's target validity checks.
2009-11-29 07:41:54 +00:00
2a28862dcc
Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero, which some devices use instead of Note Off messages (thanks to Robin Green).
2009-11-26 11:16:20 +00:00
5aa2b26261
Added new RNDIS Host class driver and the beginnings of a RNDISEthernetHost Class Driver demo.
...
Fixed all Class drivers to ensure they have appropriate guards on each function to ensure the device is enumerated before running, fixed error codes on all guards to return "DeviceDisconnected" where possble.
Renamed HOST_SENDCONTROL_DeviceDisconnect enum value to HOST_SENDCONTROL_DeviceDisconnected to be in line with the rest of the library enum error codes.
2009-11-26 04:46:31 +00:00
8c6c27d88b
Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.
2009-11-25 03:26:57 +00:00
c05c7c7df4
Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).
2009-11-25 00:36:18 +00:00
59ed10273c
Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero.
2009-11-24 08:54:41 +00:00
e4bf986bb3
Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount.
...
Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK.
2009-11-24 01:56:59 +00:00
702bec892d
Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions.
2009-11-23 13:35:52 +00:00
8b009bc113
Added new ReportType parameter to the HID Device Class driver CALLBACK_HID_Device_CreateHIDReport() callback to indicate the report type to generate.
2009-11-23 13:22:33 +00:00
c438d01f87
Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser.
2009-11-23 13:01:50 +00:00
aaa0bed556
The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.
...
The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).
The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.
The USB_MODE_HOST token is now defined even when host mode is not available.
Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.
2009-11-23 12:40:14 +00:00
6e867f7d9b
Removed code to zero reports between two keyboard reports with differing number of pressed keys, as this relied on non-standard OS behaviour.
2009-11-23 05:45:59 +00:00
86db035b1e
Add activity LED updates to the AVRISP project.
2009-11-23 05:28:08 +00:00
bcf07edeb2
Commit for the 091122 release.
2009-11-22 04:56:59 +00:00
6c38ca2890
Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when the given data length is zero.
2009-11-20 06:56:43 +00:00
7ef58eef7a
Fixed LowLevel Keyboard demo not saving the issued report only after it has been written to the endpoint.
...
Added support for multiple keyboard keycodes in a single report to the LowLevel and ClassDriver Keyboard demos.
2009-11-20 04:39:41 +00:00
79e54580ae
Fixed HOST_STATE_AS_GPIOR being ignored whilst in Host mode (thanks to David Lyons).
2009-11-16 05:45:05 +00:00
588886878e
Corrections, improvements and additions to the incomplete RNDISHost demo.
...
Change device demos which use the joystick to use the natural UP, DOWN, LEFT, RIGHT ordering in all demos when checking the joystick's position.
2009-11-13 13:24:04 +00:00
04774208b6
Minor code cleanups for clarity.
2009-11-11 09:09:39 +00:00
c1782ac024
Added new stream creation function to the CDC Class drivers, to easily make standard streams from CDC Class driver instances.
2009-11-10 06:22:03 +00:00
8bb007f80b
Fixed HID host Class driver report send/receive report broken when issued through the control pipe.
...
Make Mass Storage device Class driver accept resets at any time, rather than just after a command block has been processed.
Remove the HID device parser from the boot protocol Keyboard/Mouse demos.
2009-11-09 08:24:01 +00:00
f7ab433c67
Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.
2009-11-06 13:43:18 +00:00
8ba51f090f
Added new Printer Host mode Class driver.
...
Added new Printer Host mode ClassDriver demo.
Added table of supported classes and modes to the main USB Class Driver documentation.
2009-11-04 13:16:53 +00:00
4670b39070
Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop. Increased the default number of collection paths allowable by the parser.
2009-11-04 07:14:38 +00:00
87b2572ae5
Added new JoystickHostWithParser demos to the library.
...
Add some missing documentation to some of the library demos.
2009-11-04 04:55:10 +00:00
f93f732108
Update DevChapter9.c - use the Endpoint_ClearStatusStage() function where possible to reduce code size and (potentially) allow for centralized status stage timeouts.
...
Fix Joystick device demo HID descriptors - buttons should be placed outside the Pointer collection.
2009-11-04 04:17:11 +00:00
5832bab02f
Rename the AT90USBXXX67 internal driver directory to AVRU4U6U7.
2009-11-03 11:11:51 +00:00
cf610c5c91
Make HID device class driver reselect the correct endpoint after the user callbacks have fired.
2009-10-26 05:27:59 +00:00
de70f0f1cf
Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.
2009-10-18 05:35:48 +00:00
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
2009-10-16 08:04:51 +00:00
dc68de15b6
Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.
...
Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
2009-10-12 05:59:55 +00:00
be9d0a5aa9
Added stdio.h stream examples for the virtual CDC UART in the CDC host demos.
...
Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.
2009-10-11 06:14:08 +00:00
c7bc3ec391
Add new MIDI Host Class driver to the library, and new MIDIHost ClassDriver demo.
...
Make MouseHost and KeyboardHost ClassDriver demos use the HID Class driver's structures for the boot protocol Mouse/Keyboard report data, rather than rolling their own.
2009-10-08 08:46:27 +00:00
bdedbd558c
Add new MIDIHost LowLevel demo application.
...
Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.
2009-10-08 07:00:44 +00:00
433399b05d
Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer samples to and from the device (allowing more time for processing and output).
...
Fixed ClassDriver AudioOutput demo not selecting an audio output mode.
2009-10-03 07:59:32 +00:00
b7eead83aa
Cleanups to the Device mode Mass Storage demo applications' SCSI routines.
2009-10-02 07:40:24 +00:00
2f643f6143
Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when Report protocol is not needed.
2009-09-30 08:16:42 +00:00
baa1b22654
Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe) to send report to the attached device.
2009-09-30 07:58:17 +00:00
89c837ee34
Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.
...
MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.
Added beginnings of a MIDI class bootloader.
2009-09-30 04:40:36 +00:00
Dean Camera