4bd44139b1
Move TWI.c driver into the straight LUFA/Drivers/Peripheral/ directory.
...
Fix TemperatureDataLogger and Webserver project builds.
2010-01-25 13:02:25 +00:00
431db89b00
Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe.
2010-01-25 11:50:41 +00:00
74b6993d66
Cleanup and partially fix AVRISP-MKII project's TPI programming support.
2010-01-25 04:13:44 +00:00
857381185d
ADC2 and ADC3 channels do not exist on the U4 series USB AVRs.
2010-01-25 02:15:27 +00:00
b68f7f1649
Added explicit ADC channel masks for the standard set of ADC channels, as the single-ended channel MUX masks are not equal to the channel number on some AVR models. Changed demos to use the new channel masks when using the ADC driver.
2010-01-25 00:52:45 +00:00
60fd0ff418
Changed XPLAINBridge project to be both a USB to USART bridge and a PDI programmer, based on the state of a mode select pin.
2010-01-19 05:27:58 +00:00
2746154652
Added master mode hardware TWI driver.
...
Fixed a bug in the incomplete Webserver project, where the packet data was not being written to and read from the correct buffer address.
2010-01-19 00:25:26 +00:00
f3d370a777
Clean up and add more comments to the AVRISP-MKII project. Make sure the SPI_MULTI command handler supports multiple packet responses. Use slightly smaller/faster repeated indirect-load commands when retrieving the PDI target's memory CRCs.
2010-01-17 04:39:33 +00:00
b0ce1eab66
Fix incorrect preprocessor checks in the PLL prescaler mask determination code for the ATMEGA32U2.
2010-01-16 00:40:52 +00:00
77dda302ac
Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
...
Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
Changed incomplete Webserver project over to using the uIP timer library.
2010-01-15 02:42:54 +00:00
89e4d73289
Fixed incorrect interface values in the VirtualSerialMouse and KeyboardMouse demo class driver structures.
...
Added caveat information to the CDC device class driver.
2010-01-12 00:42:00 +00:00
5fc294a650
Oops - incorrect Dataflash chip select mask in the XPLAIN Dataflash driver.
2010-01-07 13:23:43 +00:00
a56d95e8c2
Fix XPLAIN Dataflash and LED drivers.
2010-01-07 12:38:32 +00:00
d97db1120b
Added support to the MIDI Class drivers for packed data, where multiple MIDI events are packed into a single USB packet. Added new MIDI Class driver flush routines to override packing behaviour.
2010-01-05 13:52:34 +00:00
60e9641222
Inline USB management functions in the Class drivers which are standardized but currently unused, to prevent them from using up unneccesary cycles and flash in the user application.
2010-01-05 04:50:18 +00:00
6122ba93cf
Fix MassStorageKeyboard demo USE_INTERNAL_SERIAL check being performed before the required library headers were included, causing a compilation error.
...
Added notes to the class driver functions indicating which functions require what Device/Host state machine states to function.
2010-01-04 13:34:02 +00:00
1e1cf2c499
Fix CDC blocking streams in Host mode locking up when the device is removed.
2010-01-04 00:33:31 +00:00
71e5bcee3d
Fixed blocking CDC streams not aborting when the host is disconnected.
2010-01-04 00:14:09 +00:00
58a39c6666
Clean up MassStorageKeyboard demo.
2010-01-03 03:48:40 +00:00
7f9f97c792
Update copyright year to 2010.
2009-12-30 23:49:19 +00:00
208edeee0f
Add new TemperatureDataLogger project, a simple USB Mass Storage class Temperature Data Logger using the onboard Dataflash and Temperature sensor.
2009-12-30 09:00:29 +00:00
d4ca7fb44c
Fix MIT license language to make its intent clearer.
2009-12-28 00:34:20 +00:00
d4952265a6
Ensure that unsupported SetFeature/ClearFeature request targets cause a STALL back to the host.
2009-12-21 08:29:12 +00:00
8b75659563
Added new NO_DEVICE_SELF_POWER and NO_DEVICE_REMOTE_WAKEUP compile time options.
2009-12-20 13:00:49 +00:00
2cab8f0725
Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be used (thanks to Daniel Levy).
2009-12-18 00:32:21 +00:00
c3758ac5ef
Un-inline the SendAddress function in NVMTarget.c/.h of the AVRISP project.
...
Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.
2009-12-17 10:02:19 +00:00
108a22a66a
The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public.
2009-12-16 04:03:08 +00:00
79efd8c79e
Fix a bug in the Still Image Host Class driver where the returned block status code was being truncated.
...
Add programming support to the AVRISP project's PDI programming mode; paged memory writes are not currently functional.
2009-12-15 05:17:52 +00:00
6648234157
Test with -Wextra, fix library warnings due to unused function parameters.
2009-12-13 14:43:34 +00:00
32b7762325
Oops - wrong casting on the Configuration Descriptor pointer advance routine.
2009-12-13 14:16:29 +00:00
3705330dd3
Use -pedantic compile time option to find and correct several minor code errors.
2009-12-13 14:09:25 +00:00
9c8ed168e5
Fix inverted bit-banged USART logic in the AVRISP project for PDI programming. Add a delay to the clock toggling in the AVRISP project to ensure that the programming speed does not exceed 10MHz under any conditions to satisfy the limits in the datasheet for all target voltages. Fix incorrect pin being used as the DATA in in PDI programming mode.
2009-12-09 12:01:01 +00:00
e4cfd5208f
Fix incorrect definition of Endpoint_BytesInEndpoint() for the U4 parts.
2009-12-09 07:09:52 +00:00
7ace314cc1
Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.
...
Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.
Minor code cleanups (remove redundant comments, fix spacing, etc.).
2009-12-09 00:50:55 +00:00
c1fa230618
Add new USB_Host_GetDeviceStringDescriptor() convenience function.
2009-12-06 13:37:30 +00:00
c49bdcb7c9
Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a STALL to a GET MAX LUN request (thanks to Martin Luxen).
2009-12-04 09:08:48 +00:00
478d9dc04f
Added support for the Atmel EVK527 board hardware.
2009-12-04 06:02:28 +00:00
7e86387958
Fix double oops -- Host mode settle delay was still being ignored due to inverted logic, HID Parser was assigning the usage Min/Max usage value to the report item's collection path rather than the report item itself.
2009-12-04 02:06:38 +00:00
a925407588
Oops - fix Host mode pre-enumeration settle delay being ignored leading to failure to enumerate certain devices.
2009-12-04 01:29:20 +00:00
d6e3259f8b
Fix incorrect const'ness of the ReportItem parameter in USB_SetHIDReportItemInfo().
2009-12-04 01:09:39 +00:00
2919aeeaab
Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items.
...
Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype.
Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values.
2009-12-04 01:06:26 +00:00
bae00a3d42
Added support for the Dataflash mounted on the XPLAIN board. Added new XPLAIN_REV1 board target for the first revision XPLAIN board, which used a different (smaller) Dataflash IC to later revisions.
2009-12-03 08:59:12 +00:00
1b2cd16976
Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device.
2009-11-30 02:20:26 +00:00
b7f6a65c25
Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2.
...
Simplified the USB.h master include file's target validity checks.
2009-11-29 07:41:54 +00:00
414b92e812
Add to the existing CDC Class Driver's CreateStream() function documentation to explicitly state that the created streams are bidirectional.
2009-11-29 05:19:41 +00:00
958d28d05d
Better checking of whether a packet is received in the RNDISEthernetHost Class driver demo - show busy LED status while packets are being printed out.
2009-11-27 06:32:26 +00:00
5e46801096
Complete RNDIS Host Class driver code - add SendPacket function.
...
Correct CDC Host Class driver token handling for sending data on bidirectional data endpoints.
2009-11-26 11:40:15 +00:00
f6de4db000
Remove documentation of deleted parameters from the RNDIS Host Class driver's device Initialize function.
2009-11-26 05:08:00 +00:00
04e177b66e
Fix RNDIS Device Class driver - RNDISConstants.h has moved out to the Common Class driver directory.
2009-11-26 04:50:15 +00:00
5aa2b26261
Added new RNDIS Host class driver and the beginnings of a RNDISEthernetHost Class Driver demo.
...
Fixed all Class drivers to ensure they have appropriate guards on each function to ensure the device is enumerated before running, fixed error codes on all guards to return "DeviceDisconnected" where possble.
Renamed HOST_SENDCONTROL_DeviceDisconnect enum value to HOST_SENDCONTROL_DeviceDisconnected to be in line with the rest of the library enum error codes.
2009-11-26 04:46:31 +00:00
ab602a8b48
Fix typo in the StillImageHost LowLevel demo, and the CDC Host Class Driver.
2009-11-25 04:23:40 +00:00
50f4a3b625
Fix build and Doxygen errors.
2009-11-25 03:56:51 +00:00
8c6c27d88b
Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.
2009-11-25 03:26:57 +00:00
c05c7c7df4
Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).
2009-11-25 00:36:18 +00:00
59ed10273c
Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero.
2009-11-24 08:54:41 +00:00
e4bf986bb3
Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount.
...
Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK.
2009-11-24 01:56:59 +00:00
702bec892d
Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions.
2009-11-23 13:35:52 +00:00
8b009bc113
Added new ReportType parameter to the HID Device Class driver CALLBACK_HID_Device_CreateHIDReport() callback to indicate the report type to generate.
2009-11-23 13:22:33 +00:00
c438d01f87
Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser.
2009-11-23 13:01:50 +00:00
aaa0bed556
The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.
...
The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).
The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.
The USB_MODE_HOST token is now defined even when host mode is not available.
Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.
2009-11-23 12:40:14 +00:00
6c38ca2890
Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when the given data length is zero.
2009-11-20 06:56:43 +00:00
d753512cca
Fix doxygen documentation - doxygen was getting confused on the variable-length ATTR_NON_NULL_PTR_ARG() macro used on function prototypes and was generating many return types for several functions in the documentation (thanks to David Lyons).
2009-11-17 11:28:07 +00:00
9b20114555
Make RNDISHost demo validate the set Packet Filter to ensure that it is being sent correctly.
...
Add new (incomplete) StandaloneProgrammer project, using the ELM Petite FAT library to read files stored on the board's dataflash by the host.
2009-11-17 10:32:17 +00:00
79e54580ae
Fixed HOST_STATE_AS_GPIOR being ignored whilst in Host mode (thanks to David Lyons).
2009-11-16 05:45:05 +00:00
ea5236b3e1
Fix incorrect compiler error message when F_CLOCK is not defined by the user (thanks to Dave Lyons).
2009-11-15 13:09:02 +00:00
21cc9c9e19
Cleanups to the MassStorage Device demos, and the MassStorage Device Class driver.
2009-11-15 12:50:23 +00:00
588886878e
Corrections, improvements and additions to the incomplete RNDISHost demo.
...
Change device demos which use the joystick to use the natural UP, DOWN, LEFT, RIGHT ordering in all demos when checking the joystick's position.
2009-11-13 13:24:04 +00:00
e625fd6df3
Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().
2009-11-13 10:07:25 +00:00
652042111c
Add blocking versions of the CDC Class driver streams, for applications requiring blocking reads.
2009-11-12 12:47:15 +00:00
6a46f0025a
Add beginnings of a RNDIS Ethernet Host demo.
2009-11-12 10:43:07 +00:00
04774208b6
Minor code cleanups for clarity.
2009-11-11 09:09:39 +00:00
5de364163f
Update CDC Class Driver character stream functions to use the correct avr-libc return codes for errors and EOF.
...
Fix pointer arithmetic on void byte buffers by explicitly typecasting the buffer pointers to uint8_t* before altering them.
2009-11-10 11:24:15 +00:00
c1782ac024
Added new stream creation function to the CDC Class drivers, to easily make standard streams from CDC Class driver instances.
2009-11-10 06:22:03 +00:00
d6edfe35c8
Spell check all source code variables, comments and strings.
2009-11-09 13:15:28 +00:00
8bb007f80b
Fixed HID host Class driver report send/receive report broken when issued through the control pipe.
...
Make Mass Storage device Class driver accept resets at any time, rather than just after a command block has been processed.
Remove the HID device parser from the boot protocol Keyboard/Mouse demos.
2009-11-09 08:24:01 +00:00
4dde844e9f
Remove dependancies from the LowLevel demos to the ClassDriver demos, since the use of ClassDriver headers now outputs an error when NO_STREAM_CALLBACKS is used.
2009-11-08 21:56:18 +00:00
34dc7f241f
Make Low Level host demos use void pointers for the configuration descriptor, to prevent warnings when passed to the altered configuration descriptor parsing routines.
...
Added preprocessor checks to give a human readable error when the class drivers are used when the incompatible NO_STREAM_CALLBACKS compile time option is used.
2009-11-07 07:23:03 +00:00
64e5c4084f
Add optional pipe double banking support to the Host mode Class drivers.
...
Descriptor processing routines now pass around void pointers rather than uint8_t pointers, as their destination datatype is know well known -- they are just streams of bytes until they are cast to the correct destination type by DESCRIPTOR_CAST.
2009-11-07 03:51:24 +00:00
f29fc1abc4
Add double banking property to LUFA powered projects in the Projects directory. Add guards to macro parameters to ensure that formulas passed as parameters don't mess up the internal macro structure.
2009-11-06 14:32:01 +00:00
f7ab433c67
Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.
2009-11-06 13:43:18 +00:00
1c7aa68596
Add other missing Printer.h main class driver dispatch file.
2009-11-04 13:23:47 +00:00
4563350628
Add missing Printer.h common class driver file.
2009-11-04 13:22:38 +00:00
8ba51f090f
Added new Printer Host mode Class driver.
...
Added new Printer Host mode ClassDriver demo.
Added table of supported classes and modes to the main USB Class Driver documentation.
2009-11-04 13:16:53 +00:00
4670b39070
Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop. Increased the default number of collection paths allowable by the parser.
2009-11-04 07:14:38 +00:00
f93f732108
Update DevChapter9.c - use the Endpoint_ClearStatusStage() function where possible to reduce code size and (potentially) allow for centralized status stage timeouts.
...
Fix Joystick device demo HID descriptors - buttons should be placed outside the Pointer collection.
2009-11-04 04:17:11 +00:00
5832bab02f
Rename the AT90USBXXX67 internal driver directory to AVRU4U6U7.
2009-11-03 11:11:51 +00:00
870591983c
Add const attribute to class driver APIs.
...
Add new manual pages detailing the advantages of LUFA over the official Atmel USB AVR stack, and reasons why LUFA should be used over a built-from-scratch USB stack.
2009-11-03 02:06:13 +00:00
de8c9445d4
Make HID device class driver ignore the previous HID report comparison buffer when the user sets it to NULL, disabling automatic report comparisons. Update HID device class driver documentation giving previous report buffer limitations.
2009-10-26 11:44:36 +00:00
cf610c5c91
Make HID device class driver reselect the correct endpoint after the user callbacks have fired.
2009-10-26 05:27:59 +00:00
de70f0f1cf
Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.
2009-10-18 05:35:48 +00:00
e53c120a22
Fix AudioOutput and AudioInput class driver demos' descriptors -- incorrect value was being supplied in the audio descritors field giving the number of discrete audio formats the device supports.
2009-10-14 09:42:11 +00:00
c7bc3ec391
Add new MIDI Host Class driver to the library, and new MIDIHost ClassDriver demo.
...
Make MouseHost and KeyboardHost ClassDriver demos use the HID Class driver's structures for the boot protocol Mouse/Keyboard report data, rather than rolling their own.
2009-10-08 08:46:27 +00:00
09575f9607
Fix accidentally changed code breaking the HID descriptor parser.
2009-10-05 05:20:30 +00:00
046fff2aff
Fix broken Endpoint/Pipe stream templates.
...
Simplify AudioOutput demos, to reduce the number of cycles needed to process each incomming sample.
2009-10-04 07:57:15 +00:00
db435c4995
Minor documentation fixups.
2009-10-03 15:30:29 +00:00
433399b05d
Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer samples to and from the device (allowing more time for processing and output).
...
Fixed ClassDriver AudioOutput demo not selecting an audio output mode.
2009-10-03 07:59:32 +00:00
3ebfb998ec
Added support for the Atmel XPLAIN board.
2009-10-02 09:11:37 +00:00
2f643f6143
Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when Report protocol is not needed.
2009-09-30 08:16:42 +00:00
baa1b22654
Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe) to send report to the attached device.
2009-09-30 07:58:17 +00:00
89c837ee34
Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.
...
MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.
Added beginnings of a MIDI class bootloader.
2009-09-30 04:40:36 +00:00
e57e08c672
Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a device ID (thanks to Andrei Krainev).
2009-09-28 15:56:27 +00:00
409c49f057
Doxygen fixes to \param directives to give data direction in all projects. Make HID item filtering routines clearer in the HID WithParser demos.
2009-09-24 02:05:33 +00:00
573a27d90a
Fix incorrect names for the HID Host protocol setting routines.
2009-09-24 01:52:57 +00:00
849b9535e7
Add new error condition to the HID Report Parser for when a report is parsed but no unfiltered items are encountered (i.e. nothing of interest in the device report). Make all host HID "WithParser" demos print the new error condition.
2009-09-22 08:07:48 +00:00
242303c160
Add new attributes to the HID Report Parser and HID Host Mode Class driver to keep track of the largest report the device can send for buffer allocation purposes. Change MouseHostWithParser and KeyboardHostWithParser demos to only allocate the needed number of bytes.
2009-09-21 12:23:09 +00:00
3ffa7543a0
Finish initial draft of the Host Mode HID Class driver.
...
Add new MouseHostWithParser and KeyboardHostWithParser Host Class driver demos.
2009-09-21 10:49:06 +00:00
9d6a373cb6
Add const qualifiers to Host mode Class drivers.
...
Fix KeyboardHost ClassDriver demo; boot protocol keyboard report structure in the Host Mode HID Class driver uses the full keycode array from the attached device.
2009-09-21 06:08:39 +00:00
7478b387a9
Oops - Keyboard boot report structure should be an array of 6 keycodes.
2009-09-20 13:01:45 +00:00
aa640330a1
Finish Class Driver MouseHost demo. Update HID Host Class driver; boot protocol now works, still need to finish and test report protocol mode.
2009-09-20 12:34:07 +00:00
51566d1a81
Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen.
...
Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID.
More additions to the unfinished HID Host Class Driver.
2009-09-20 12:01:25 +00:00
cd0adb7574
Added support for the officially recommended layout of the external peripherals connected to the BUMBLEB board.
...
Added flag to the HID Host Class driver to indicate the currently selected reporting protocol.
2009-09-17 23:34:16 +00:00
7c6b2019a3
Fix Mass Storage Host Class driver GetMaxLUN command - incorrect function return codes used in comparison to check for success.
...
Add HID Host Class driver functions to set the report protocol, add more class driver documentation.
2009-09-17 13:12:21 +00:00
eee712f769
Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker).
2009-09-14 05:57:17 +00:00
81b618be23
Revert changed CDC_Device_Flush() prototype accidentially changed in the last commit.
2009-09-10 07:05:26 +00:00
e918d977b1
Prevent the CDC Device Class driver from sending empty IN packets on every service task call - only send termination packets when data is in the endpoint.
2009-09-10 06:41:57 +00:00
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
2009-09-09 13:17:04 +00:00
524decdeb3
Change HID report parser so that it can calculate and record the sizes (IN, OUT and FEATURE) of each report within the device, by report ID. This will be required in host mode, so that the host can determine how many bytes of data must be read in for each report.
...
Add to MouseHostWithParser and KeyboardHostWithParser demos to print out the report sizes when a valid device is connected.
2009-09-09 08:34:24 +00:00
d2068d878c
Finish Still Image Host class driver.
2009-09-09 04:18:37 +00:00
c8b72f955f
Corrected incorrect signature bytes for the AT90USB82 and added support for the ATMEGAXX2 variant AVRs to the DFU bootloader.
...
Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.
2009-09-07 07:57:00 +00:00
064e6a2f32
Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.
...
CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).
The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
2009-09-06 04:15:35 +00:00
6783bc4594
Add StillImage Host Class Driver functions for opening and closing sessions. Ensure IsActive is set on the interface to allow device functions to run.
...
Fix spelling of "Received" in all source files where it is misspelt "Recieved".
2009-09-02 13:08:55 +00:00
205b35d131
Add user-filtering to the HID report parser, so that the user code can decide which items are to be stored into the HID_ReportInfo_t structure and which should be discarded to save on RAM usage.
2009-09-02 07:16:52 +00:00
0fdc1a2bc6
Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles.
2009-09-01 15:46:46 +00:00
0e2ffebb82
Added documentation for the constants and enums of the new StillImage Host Class driver added to the library so far.
2009-09-01 13:47:11 +00:00
5908e28e8d
Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header.
...
Added basic PIMA commands to the StillImage Host Class driver - need to extend to PIMA specific command functions.
2009-09-01 13:35:30 +00:00
dac7b046fd
Add return codes to the CDC Host Class driver String/Byte transmission functions.
2009-08-31 13:58:03 +00:00
cf2776531c
Add extra check for OUT ZLP in the CDC Device Class driver service task to quickly clear zero-length termination packets from the host.
2009-08-31 12:43:28 +00:00
778da9dc6d
Removed unused INCLUDE_FROM_BOARD_DRIVER internal define from the board driver dispatch headers.
2009-08-31 08:35:52 +00:00
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
2009-08-31 07:48:32 +00:00
e2822fb30d
Remove deleted source files from the LUFA library makefile.
...
Renamed parameters of SI_Host_ConfigurePipes() to match other Host mode Class drivers.
2009-08-30 11:40:26 +00:00
3dce79d68c
Added start of the Still Image Host Class driver demo and driver code.
...
Re-enabled building of the Host mode demos ClassDriver directory.
2009-08-30 11:36:04 +00:00
0d3a3f7536
Remove skeleton Audio and MIDI Host mode Class drivers -- will not implement in next release.
2009-08-30 10:43:41 +00:00
94c899d7b7
Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback routine, so that ignored callbacks don't cause incorrect data to be sent.
2009-08-27 22:34:41 +00:00
922e60192d
Condensed SCSI command functions in the LowLevel Mass Storage Host demo, to save on FLASH space.
...
Fixed issue in AVRISP project where the target RESET line was being toggled before it was tristated, causing problems synchronising to some targets (thanks to Mike Alex).
2009-08-27 13:12:44 +00:00
023838fe4a
Add check to Pipe_IsEndpointBound() in the Mass Storage Host mode Class driver to ensure that multiple instances of the driver can be used on a single device with multiple Mass Storage interfaces.
2009-08-27 11:43:37 +00:00
f52b265090
Simplified Host mode Mass Storage Class driver to reduce compiled program size.
2009-08-27 08:17:06 +00:00
754ea083d4
Fix memory corruption in Host mode Mass Storage Class driver.
2009-08-27 08:01:33 +00:00
cd2dcc9163
Added better USB Class driver overviews.
2009-08-27 07:48:48 +00:00
d297ea12b7
Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity.
...
Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code.
2009-08-27 07:38:40 +00:00
f7cde02b80
Added extra note about missing OUT endpoint configuration to the HID Device mode Class driver.
...
Added pinout information to the AVRISP project.
2009-08-27 07:10:00 +00:00
665fe11f12
Fixed Device mode HID Class driver always sending IN reports, even when no data is to be reported.
2009-08-27 06:36:01 +00:00
8ea5c631c8
Minor documentation fixes to the completed Host mode Class drivers.
2009-08-27 06:32:12 +00:00
f890592806
Completed initial Host mode Mass Storage class driver.
2009-08-27 06:28:18 +00:00
559ca2ba04
Added MS_Host_TestUnitReady() and MS_Host_ReadDeviceCapacity() to the host mode Mass Storage Class driver.
2009-08-26 08:20:55 +00:00
a765f71727
Add SCSICodes.h to the Class Driver Common folder, and automatically include it in both the Host and Device Mass Storage Class drivers. Delete existing version from the ClassDriver MassStorage device demo's /Lib/ folder.
2009-08-26 07:51:40 +00:00
31d8ebebc0
Oops: Really disable building of Projects/Host/ClassDriver directory in the Projects/Host/ makefile.
...
Add more skeleton functions and definitions to the Mass Storage Host mode Class driver.
Made Endpoint_Write_DWord_* functions echo the structure of the matching Endpoint routines for clarity.
2009-08-26 07:34:31 +00:00
ee744abb7e
More work on the Mass Storage Host mode Class driver.
...
Added ATTR_NON_NULL_PTR_ARG() attributes to the class drivers to improve user code reliability by disallowing explicit NULL pointers as pointer parameters in function calls where the parameter must not be NULL.
Disabled building of the Demos/Host/ClassDriver directory until Host Mode Class drivers are complete to prevent build errors in the meantime.
2009-08-26 07:01:32 +00:00
f547eb3608
Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size.
...
Fixed Programmer's Notepad project file to reflect new location of AVRISP project.
2009-08-25 14:30:42 +00:00
6d1adf7339
Updated Benito project -- added hardware interrupt and software buffering for serial data reception to prevent missed characters, condensed pulse generation counters into a struct for clarity.
...
Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host.
Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.
2009-08-25 08:09:49 +00:00
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
2009-08-23 08:37:11 +00:00
1e8df8951a
Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.
...
Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.
2009-08-23 04:01:49 +00:00
2f95eea146
Add LOAD ADDRESS command parsing to the V2 Protocol hander in the AVRISP project.
...
Fix up references to functions in the Endpoint/Pipe documentation.
2009-08-20 07:16:55 +00:00
6d99486791
Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient.
...
Fix up Programmers Notepad Project file to show new Projects directory layout. Remove now moved AVRISP project from the Projects directory makefile.
2009-08-18 07:42:19 +00:00
ecd82778cf
Added beginnings of a new AVRISP-MKII clone project.
...
Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.
Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
2009-08-17 12:38:24 +00:00
09bedd6555
Added return values to the CDC and MIDI class driver transmit functions.
2009-08-16 14:30:46 +00:00
b71ff7c8cd
Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
2009-08-16 08:51:54 +00:00
df5500e81c
Added CDC_Device_Flush() command to the CDC Device mode class driver.
...
Minor updates to the unfinished SideShow demo for clarity.
Added unfinished MassStorageHost class driver demo.
2009-08-13 06:43:17 +00:00
df29aa37c0
Added flag to the HID report parser to indicate if a device has multiple reports.
...
SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested HID interface within the device, not all HID interfaces.
Apply correct fix to the HID report parser for PUSH items - current HID item attribute stack was being copied in the wrong direction.
Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered.
2009-08-11 11:19:22 +00:00
a7ade9f28d
Add CDC Host class driver EVENT_CDC_Host_ControLineStateChanged() event.
...
Minor documentation fixes.
2009-08-11 10:02:50 +00:00
abc7dce10c
Document CDC Host class driver functions and enums.
2009-08-11 09:54:22 +00:00
c86491af8b
Add new functions to the HID host class driver, refine HID interface protocol matching.
...
Remove stray state variable from the CDC host class driver.
2009-08-11 09:12:29 +00:00
a2001ac1cc
Fixed swapped paremeters in the HID state memory copy call while processing a HID PUSH item in the HID report parser.
...
Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed.
Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro.
Make HID host class driver include the HID report parser.
2009-08-11 08:36:25 +00:00
f4814771d2
Completion of initial CDC host mode class driver.
...
Adjustments to the CDC and MIDI device class drivers to use sizeof() on the actual variable being transmitted or received rather than its datatype to reduce possible mistakes.
2009-08-11 02:09:11 +00:00
8711dc7ced
Fix issue in CDC device class driver where received data the size of the data endpoint could lock up the driver.
...
Further work on the new CDC and HID host mode class drivers.
Reset changelog et. al. to reset development information for the new version currently under development.
2009-08-11 01:52:15 +00:00
d423090b26
Cleanups to RNDIS device demos. Fix issue in RNDIS demos where the memory would become corrupted due to an incorrect bounds check when iterating over the port state table, causing random resets.
...
Revert change to Template_Endpoint_Control_R.c, which broke control stream reads.
Remove uneeded ADC.h include in the class driver AudioOutput demo.
2009-08-07 06:55:31 +00:00
85c2716f2d
Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.
...
Fix incorrect event name in MassStorageHost.c.
2009-08-07 00:27:11 +00:00
c830fcb0e1
Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.
...
Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
2009-08-06 14:22:04 +00:00
4421782b7f
Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.
...
Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.
Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
2009-08-05 11:39:28 +00:00
a9d5e129b7
Changed over manual loops waiting for endpoints to be ready to use the library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.
2009-08-05 09:37:45 +00:00
4b35dd1670
Commit for 090810rc1 release.
2009-08-05 07:47:02 +00:00
042d3288ad
Fix incorrect Event call name in USBInterrupt.c.
2009-08-05 07:18:08 +00:00
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
2009-08-05 06:36:31 +00:00
eff07bb877
Fix issue with CDC device demos causing broken communications when the device tries to send data before the host has set the line encoding.
2009-08-04 08:06:26 +00:00
840d386deb
Cleanup and optimization of the internal serial retrieval routines.
...
Renamed ATTR_NOINLINE to ATTR_NO_INLINE to fit with the rest of the library function attribute names.
2009-08-03 07:10:54 +00:00
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
2009-08-02 23:14:30 +00:00
c5eeedd522
Removed interrupt disable/enable from the Device mode control request processing routines, as they can cause problems with user code and can cause infinite spinlocks under some circumstances.
...
Added new LUFA logo from EDIGMA.COM.
2009-08-02 11:33:00 +00:00
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
2009-07-31 03:22:08 +00:00
a789619fbe
Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).
...
Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).
2009-07-31 00:35:19 +00:00
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
2009-07-30 14:59:57 +00:00
7227e133a9
Ensure that the previous HID reports in the HID device class driver are kept per-instance, rather than per-device.
2009-07-30 14:40:42 +00:00
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
2009-07-30 14:35:42 +00:00
41babf1cb7
Fix incorrect configuration in the ClassDriver AudioOutput demo.
...
Make all audio device Class Driver functions require a reference to the Audio class instance, so that the endpoint size can be checked (and to standardize the APIs).
Make LEDs more responsive in the AudioOutput device demos.
2009-07-30 14:06:52 +00:00
ce3ea6fb25
Added standard stream example to the ClassDriver CDC device demo.
...
Fix incorrect HWB button mask in the STK526 Buttons driver.
2009-07-30 10:54:57 +00:00
5ca1d7bf8f
Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does not support USB host mode.
2009-07-30 07:45:36 +00:00
fef185a409
Cleanup USBMode.h to simplify preprocessor logic.
2009-07-29 02:49:34 +00:00
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
2009-07-28 16:12:09 +00:00
7f3f39b575
Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.
...
Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.
2009-07-28 15:14:54 +00:00
e426463355
Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.
2009-07-28 13:12:14 +00:00
c1be307393
Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.
2009-07-28 13:01:44 +00:00
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
2009-07-27 23:19:17 +00:00
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
2009-07-27 10:55:21 +00:00
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
2009-07-27 10:48:55 +00:00
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
2009-07-27 10:31:07 +00:00
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
2009-07-26 10:45:33 +00:00
cbbd3d746a
Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions.
2009-07-26 10:22:16 +00:00
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
2009-07-24 01:44:01 +00:00
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
2009-07-23 08:00:12 +00:00
7a5d045987
Slight changes to TeensyHID bootloader to ensure it builds under the 2KB boundary.
...
Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
2009-07-21 13:51:34 +00:00
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
2009-07-21 04:46:48 +00:00
Dean Camera