9c7594e7db
Oops - The DS1307 contains an unused "DayOfWeek" register that must be accounted for in the new unified DS1307 Time/Day read and write routines.
2011-01-13 21:01:05 +00:00
7776aa4e2e
Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition.
2011-01-13 19:14:38 +00:00
187ccb2e15
Fix typos and outdated information.
2011-01-10 21:53:38 +00:00
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
2011-01-10 18:43:34 +00:00
d126146887
The FAST_STREAM_TRANSFERS compile time option has been removed due to lack of use and low cost/benefit ratio.
...
Add GCC_FORCE_POINTER_ACCESS() macro use to the RingBuffer library header, to attempt to force GCC into producing more efficient code for manipulating the buffers.
2011-01-08 00:54:30 +00:00
1d433d4506
Update copyright year on all source files.
2011-01-01 13:00:56 +00:00
64fe1cd0b2
Rename RingBuffer header functions and typedefs from RingBuff_* to RingBuffer_* so that it matches the header name.
2010-12-31 14:47:20 +00:00
a8b66f318d
Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.
2010-12-26 14:55:26 +00:00
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
2010-12-26 14:25:34 +00:00
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
2010-12-26 13:01:37 +00:00
12418e6eaf
Combined page and word ISP programming mode code in the AVRISP-MKII clone project to reduce compiled size and increase maintainability of the code.
2010-12-25 21:36:17 +00:00
958b20a8ef
Fixed possible programming problem in the AVRISP-MKII clone project when programming specific patterns into a target memory space that is only byte (not page) addressable.
2010-12-25 17:49:30 +00:00
7d83bd0dcc
Add DEVICE_STATE_AS_GPIOR=0 compile time option to the library projects, to reduce compiled binary size.
2010-12-24 18:04:51 +00:00
a57287a59f
Fix a few more incorrectly ordered endpoint initialisations in the device demos.
2010-12-17 20:26:14 +00:00
0381399f66
Add missing AVRStudio4 project file for the MIDIToneGenerator project.
2010-12-17 19:59:19 +00:00
0aa950c241
Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.).
...
Add extra comments to the ISPTarget.c source file in the AVRISP-MKII clone project.
2010-12-13 06:05:05 +00:00
46677b4589
Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski).
2010-12-12 16:50:45 +00:00
b67f9f3669
Added new RingBuffer_Peek() function to the lightweight ring buffer headers.
2010-12-12 16:39:46 +00:00
8a7351c760
Added new completed MIDIToneGenerator project.
2010-12-03 03:51:46 +00:00
82fa9149d7
Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground.
2010-11-27 01:27:55 +00:00
7704d2915c
Fix typos in the XPLAINBridge project preventing compilation.
2010-11-26 04:27:52 +00:00
9f7883fa2b
Added ability to write protect Mass Storage disk write operations from the host OS.
2010-11-26 04:16:47 +00:00
b634ec50a0
Changed the XPLAINBridge software UART to use the regular CTC mode instead of the alternative CTC mode via the Input Capture register, to reduce user confusion.
2010-11-25 03:20:01 +00:00
fd77bf5c94
Make the incomplete MIDIToneGenerator project work with up to three notes, using a LRU (Least Recently Used) algorithm to discard the oldest set note when the note table becomes full.
2010-11-25 02:46:35 +00:00
857a82674f
Readd incomplete MIDIToneGenerator project, which can now correctly generate up to three simultaneous notes from MIDI channel 0.
2010-11-24 13:57:44 +00:00
423d4018f0
Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy.
...
Minor documentation improvements.
2010-11-23 06:56:24 +00:00
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
2010-11-22 05:24:33 +00:00
3988639823
Oops - reduce size of each ring buffer in the USBtoSerial and Benito projects so that the RAM is not overflowed on the smaller USB AVR targets (thanks to Andrei from Microsin.ru).
2010-11-21 10:01:01 +00:00
8f7437dda2
Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
2010-11-17 05:46:18 +00:00
cbc00c843a
Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.
2010-11-16 13:14:27 +00:00
a9f313afa9
Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates.
...
Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
2010-11-16 12:30:00 +00:00
002cd6df49
Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light).
2010-11-16 01:37:43 +00:00
b27f35536d
Fixed incorrect event name in the Benito project.
2010-11-15 08:24:18 +00:00
f2324fc2b4
Second patch to fix incorrect PDI/TPI programming speed.
2010-11-14 06:44:57 +00:00
d41cd9a41a
Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz.
2010-11-12 06:24:01 +00:00
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
2010-11-10 12:38:25 +00:00
0ce2950d81
Added board hardware driver support for the Adafruit U4 breakout board.
...
Fixed calculation of timer register reload values derived from F_CPU; must subtract one from the division result for the compare value to be correct.
Change AVRISP-MKII rescue clock speed to 4MHz to ensure that a 125KHz ISP speed works regardless of the target's fuses (i.e. DIV8 set).
2010-11-08 03:41:48 +00:00
bac860b173
Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor.
2010-11-07 12:54:52 +00:00
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
2010-11-05 05:15:20 +00:00
85cf202737
Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full.
2010-11-03 11:24:34 +00:00
5ce8380a7d
Fix XPLAINBridge code broken during the changes to the Rescue Clock generation in the AVRISP-MKII clone project.
...
Change over all low level host mode project's descriptor comparator routines to perform the descriptor casting in a temp variable to make the code clearer and easier to modify (despite being more verbose).
2010-11-02 11:16:36 +00:00
3bf760ad7d
Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times when 125KHz ISP programming mode is selected.
2010-11-02 07:57:23 +00:00
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
2010-10-28 06:08:58 +00:00
55538dcef3
Add descriptor class, subclass and protocol constants to the class drivers, modify all demos to use them where possible.
...
Move out private/internal host class driver constants to the common class driver headers, so that they can be used in the Low Level host mode demos.
Ensure all demos, projects and bootloaders use the class driver constants where possible to minimise code repetition.
2010-10-25 12:42:55 +00:00
b37d77eab3
All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included.
...
All LowLevel demos changed to use the constants and types defined in the USB class drivers.
2010-10-24 22:53:57 +00:00
421479a4b9
Fix incomplete StandaloneProgrammer project code not compiling due to the recent API changes in the LUFA core.
2010-10-13 14:25:36 +00:00
31daf04c6a
Fix SoftUART.c not compiling due to accidental check in of changes not yet complete in the rest of the XPLAINBridge project code.
2010-10-13 14:23:23 +00:00
3661ae8dfb
Minor documentation corrections.
2010-10-13 14:10:24 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
3693916cd3
Fix Webserver project code not compiling due to the changes to the USB mode selection constant names.
2010-10-12 12:25:05 +00:00
Dean Camera