857a82674f
Readd incomplete MIDIToneGenerator project, which can now correctly generate up to three simultaneous notes from MIDI channel 0.
2010-11-24 13:57:44 +00:00
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
2010-11-22 05:24:33 +00:00
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
2010-11-10 12:38:25 +00:00
99a132709e
Fix incorrect ADEFS and CPPDEFS entries in the DFU and CDC class bootloader makefiles.
2010-11-09 09:38:38 +00:00
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
2010-11-05 05:15:20 +00:00
40db485c79
Rename new CDC class bootloader NO_LOCK_BYTE_SUPPORT compile time option to NO_LOCK_BYTE_WRITE_SUPPORT as reads are still permitted.
...
Clean up CDC bootloader command processing code.
2010-10-29 08:20:36 +00:00
475323e400
Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_SUPPORT compile time options to the CDC class bootloader.
2010-10-29 08:07:49 +00:00
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
2010-10-28 06:08:58 +00:00
55538dcef3
Add descriptor class, subclass and protocol constants to the class drivers, modify all demos to use them where possible.
...
Move out private/internal host class driver constants to the common class driver headers, so that they can be used in the Low Level host mode demos.
Ensure all demos, projects and bootloaders use the class driver constants where possible to minimise code repetition.
2010-10-25 12:42:55 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
292a631b62
Added new NO_SOF_EVENTS compile time option, enabled in the bootloaders to reduce the compiled binary size.
2010-10-07 11:55:20 +00:00
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
2010-09-30 06:23:38 +00:00
25d896a507
Added board hardware driver support for the Arduino Uno development board.
...
Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver.
2010-09-28 14:30:26 +00:00
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
2010-09-28 13:27:19 +00:00
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
2010-09-24 06:45:11 +00:00
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
2010-09-15 03:00:29 +00:00
e61345f872
Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2.
2010-09-14 11:19:44 +00:00
d975250331
Add the "REQ_" prefix to the DFU class bootloader class-specific request constants.
2010-09-12 12:37:16 +00:00
fdcb486e22
Fix typos in the project overview text files.
2010-09-09 13:39:52 +00:00
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
2010-08-31 12:33:21 +00:00
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
2010-08-24 13:02:38 +00:00
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
2010-08-08 08:30:42 +00:00
3c72896e84
Fixed software application start command broken in the DFU class bootloader when dfu-programmer is used due to application start address corruption.
2010-08-05 09:31:51 +00:00
48c5cdced4
Hide the PROGMEM attribute from Doxygen, as it appears to confuse the parser in some situations.
2010-08-02 08:53:23 +00:00
5dfa25f81a
Re-add deleted linker options to the Bootloader makefiles, which was preventing the compiled application from being shifted into the bootloader section address space.
2010-07-31 08:03:23 +00:00
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
2010-07-30 10:58:16 +00:00
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
2010-07-30 09:48:35 +00:00
2034141a7e
Spell check more of the third party libraries used by LUFA.
2010-07-30 08:29:53 +00:00
fd9b34aac4
Add the formula used to obtain the bootloader start address to the Bootloader makefiles to help users compute the correct address for each device based on the bootloader section size.
2010-07-30 05:13:05 +00:00
28401f7bb7
Spell check all source files once again to find any typos.
2010-07-29 16:20:45 +00:00
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
2010-07-21 16:19:32 +00:00
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
2010-07-19 14:00:44 +00:00
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
2010-07-18 07:31:57 +00:00
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
2010-07-15 17:13:33 +00:00
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
2010-07-15 16:45:26 +00:00
20943fa1aa
Add AVRStudio 4 project files to the LowLevel Host mode demos.
2010-07-13 05:01:18 +00:00
975e9d772d
Add AVRStudio 4 project files for the library bootloaders.
2010-07-13 04:43:38 +00:00
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
2010-07-12 10:18:18 +00:00
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
2010-07-02 03:37:19 +00:00
fc92f9969c
Minor documentation cleanups.
2010-06-03 15:32:45 +00:00
152b2764c3
Small tweaks to ConfigDescriptor.c/.h to ensure pointers use the correct type, and to remove const attribute from the descriptor comparator callback function pointer type define, and into the function prototype instead.
2010-05-30 14:01:41 +00:00
c1daecf18b
Fixed incorrect signature for the ATMEGA32U2 in the DFU bootloader (thanks to Axel Rohde).
...
Partial fix to the Bluetooth SDP code - data should be encoded in big endian, not little endian.
2010-05-29 07:51:01 +00:00
885170f5b4
Removed unused line encoding data and control requests from the CDC Bootloader code, to save space.
2010-05-26 12:44:05 +00:00
54e69dbee1
Switch to using the correct intptr_t type use where a pointer must be cast to an integer type.
2010-05-26 12:24:44 +00:00
776485a6c5
Remove obsolete entry from the Doxygen configuration files.
2010-05-23 08:39:02 +00:00
a883cf65dc
Renamed CDC device class demos' ManagementEndpoint descriptor to NotificationEndpoint to more accurately indicate its purpose.
2010-05-20 06:15:21 +00:00
e277ff0cf4
Removed TeensyHID bootloader, per request from Paul at PJRC.
2010-05-12 11:12:53 +00:00
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
2010-05-08 03:12:14 +00:00
e331b531c6
Change over instances of "make" in the makefiles to "$(MAKE)" to allow for the make tool to be overridden.
2010-05-07 07:11:25 +00:00
2a2de8fea9
Fix TeensyHID bootloader for the largest AVRs - only the ATMEGA128x needs the alternative addressing scheme.
2010-05-07 06:48:27 +00:00
9c8bd6ed9b
Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects.
2010-05-06 11:32:55 +00:00
cde2afc50e
Ensure that the CDC class drivers return 0 if the number of unread bytes is queried and the bank has become empty.
2010-05-06 11:13:24 +00:00
c3db72afdc
Make CDC class bootloader hard-reset the AVR when exited instead of a soft-reset. Reduce size of the TeensyHID bootloader slightly.
...
Fix the TeensyHID bootloader for the larger USB AVR devices, since Paul uses a different (undocumented) addressing scheme on these devices.
2010-05-06 07:27:13 +00:00
add5192366
Oops - typo in the updated TeensyHID bootloader code when compiled for the non Teensy++ targets.
2010-05-06 02:15:39 +00:00
298592383a
Fixed TeensyHID bootloader so that it works with the official TeensyLoader GUI application with all supported AVR models.
2010-05-06 02:06:12 +00:00
fc31973daf
Fixed incorrect comparison in the descriptor callback routine of the TeensyHID bootloader.
2010-05-06 00:25:12 +00:00
27f0ba6fc3
Fixed device state not being reset back to the default state if the host sets the address to 0x00.
...
Fixed Set Configuration requests not being stalled until the host has set the device's address.
Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
2010-05-04 10:07:22 +00:00
9e34144c9b
Use puts_P() and printf_P() instead of the normal variants where possible in the Host mode Class Driver demos.
2010-04-28 14:33:10 +00:00
e977774d4e
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
1090e767f1
Remove incomplete/nonfunctional MIDI class bootloader.
2010-04-28 08:00:46 +00:00
59c4871f80
USB_Init() no longer calls sei() to enable global interrupts - this must now be done in the user application once all init code has run.
2010-04-28 07:48:26 +00:00
3c7ff36cfd
Fix TeensyHID bootloader Doxygen configuration file's CREATE_SUBDIRS options set to true instead of false (thanks to Andrei Krainev).
2010-04-27 10:07:18 +00:00
5e14c194c9
Fixed Set/Clear Feature requests directed to a non-configured endpoint not returning a stall to the host.
...
Make TeensyHID bootloader use an 8 byte control endpoint to match the official Teensy, just in case Paul decides to authenticate on that attribute in the future.
2010-04-14 13:46:49 +00:00
7b79325aa0
Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code.
...
Added spacing between multiple paragraphs in Doxygen \note sections.
Removed call to the clock prescaler reset function in the Teensy bootloader to save space - the user application is accessed via a watchdog reset anyway, so the prescale reset would only affect the speed of the bootloader itself.
2010-04-13 23:29:11 +00:00
19ecd04f37
Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer.
2010-04-13 12:10:04 +00:00
49b09a2042
Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders and projects.
...
Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.
2010-03-22 07:12:25 +00:00
15f84bb8f5
New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).
...
Spell-check code/comments in the Webserver/AVRISP-MKII projects.
2010-02-04 02:27:09 +00:00
77e86e7d82
Exlude the "INCLUDE_FROM_*" macros from the individual project's documentation.
2010-02-03 00:57:49 +00:00
254a0c1ae8
Update driver INF files - change manufacturer name from the original template's name to the Four Walled Cubicle website.
2010-01-29 06:32:20 +00:00
5f776f4785
Fix up project documentation files' overview tables, so that multiple items occupy multiple lines in the same cell, rather than multiple cells.
2010-01-28 13:17:36 +00:00
db420853ce
Add Webserver project Doxygen configuration file and overview document.
...
Fix Doxygen configuration files' input file exclusion filters.
2010-01-25 12:46:57 +00:00
871d9bf1af
Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming ranges are specified (thanks to Thomas Bleeker).
2010-01-24 13:38:20 +00:00
77dda302ac
Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
...
Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
Changed incomplete Webserver project over to using the uIP timer library.
2010-01-15 02:42:54 +00:00
efb6c35778
Update Doxygen configuration files to the latest Doxygen version.
2010-01-06 13:37:29 +00:00
7f9f97c792
Update copyright year to 2010.
2009-12-30 23:49:19 +00:00
39ab7507dd
Remove duplicate #include of <avr/wdt.h> in the TeensyHID bootloader.
2009-12-28 00:55:23 +00:00
d4ca7fb44c
Fix MIT license language to make its intent clearer.
2009-12-28 00:34:20 +00:00
d1608d4af3
Added const where possible to the source functions in the Projects directory.
...
Added command timeout to the AVRISP project so that incorrectly connected targets no longer freeze the device.
Removed string descriptors from the TeensyHID bootloader to reduce its size.
2009-12-26 04:13:55 +00:00
df31b1fd5b
Fix TeensyHID bootloader - change vendor page in the descriptors to match the undocumented page needed for the new Teensy 2.0 boards.
...
Commit for the 091223 release.
2009-12-23 07:38:53 +00:00
24f730fce3
Ooops - TeensyHID bootloader makefile should use a 16MHz FCPU, not 8MHz.
2009-12-21 10:44:00 +00:00
d4952265a6
Ensure that unsupported SetFeature/ClearFeature request targets cause a STALL back to the host.
2009-12-21 08:29:12 +00:00
c99f6657a6
Correct TeensyHID bootloader descriptors to use the correct revision code for the ATMEGA32U4 based Teensy revision.
2009-12-21 07:42:43 +00:00
8b75659563
Added new NO_DEVICE_SELF_POWER and NO_DEVICE_REMOTE_WAKEUP compile time options.
2009-12-20 13:00:49 +00:00
77cd3a42a7
Fixed TeensyHID bootloader not enumerating to the host correctly.
2009-12-20 12:09:22 +00:00
7ace314cc1
Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.
...
Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.
Minor code cleanups (remove redundant comments, fix spacing, etc.).
2009-12-09 00:50:55 +00:00
2281750b5f
Make sure that USB_STREAM_TIMEOUT_MS is set in the MassStorageHost ClassDriver demo, so that slow devices don't time out the data pipe. Increase pipe timeout in both MassStorageHost demos to 5 seconds to account for the really slow devices.
...
Fix TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting the AVR.
2009-12-08 07:43:33 +00:00
414b92e812
Add to the existing CDC Class Driver's CreateStream() function documentation to explicitly state that the created streams are bidirectional.
2009-11-29 05:19:41 +00:00
04774208b6
Minor code cleanups for clarity.
2009-11-11 09:09:39 +00:00
d6edfe35c8
Spell check all source code variables, comments and strings.
2009-11-09 13:15:28 +00:00
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
2009-10-16 08:04:51 +00:00
dc68de15b6
Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.
...
Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
2009-10-12 05:59:55 +00:00
be9d0a5aa9
Added stdio.h stream examples for the virtual CDC UART in the CDC host demos.
...
Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.
2009-10-11 06:14:08 +00:00
664a292181
Application documentation/comment cleanup.
2009-10-08 07:18:28 +00:00
bdedbd558c
Add new MIDIHost LowLevel demo application.
...
Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.
2009-10-08 07:00:44 +00:00
89c837ee34
Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.
...
MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.
Added beginnings of a MIDI class bootloader.
2009-09-30 04:40:36 +00:00
51566d1a81
Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen.
...
Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID.
More additions to the unfinished HID Host Class Driver.
2009-09-20 12:01:25 +00:00
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
2009-09-09 13:17:04 +00:00
6f993a2f75
Add link to third-party signed version of the official FLIP DFU driver for 64-bit Windows OSes to the DFU bootloader readme file.
...
Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.
2009-09-07 10:50:58 +00:00
7882da1ed8
Remove information about 64 bit Windows OS signing requirements for the CDC based demos -- apparently the native CDC driver can be installed without first disabling the OS's driver signing requirements.
2009-09-07 08:11:17 +00:00
c8b72f955f
Corrected incorrect signature bytes for the AT90USB82 and added support for the ATMEGAXX2 variant AVRs to the DFU bootloader.
...
Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.
2009-09-07 07:57:00 +00:00
Dean Camera