99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
2009-08-05 13:16:36 +00:00
4421782b7f
Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.
...
Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.
Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
2009-08-05 11:39:28 +00:00
a9d5e129b7
Changed over manual loops waiting for endpoints to be ready to use the library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.
2009-08-05 09:37:45 +00:00
042d3288ad
Fix incorrect Event call name in USBInterrupt.c.
2009-08-05 07:18:08 +00:00
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
2009-08-05 06:36:31 +00:00
357ccc577b
Better fix for LowLevel CDC demo issue where sending data before the line encoding is set will cause a failure of the host to open the port. Added fix to the DualCDC and USBtoSerial LowLevel demos.
2009-08-04 08:36:30 +00:00
eff07bb877
Fix issue with CDC device demos causing broken communications when the device tries to send data before the host has set the line encoding.
2009-08-04 08:06:26 +00:00
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
2009-08-02 23:14:30 +00:00
bbf89d81fa
Make both LowLevel and ClassDriver AudioOutput demos always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS compile time option from the demo). This allows for positive feedback to the user of audio activity regardless of output mode.
2009-08-02 11:43:16 +00:00
ac593611c9
Fixed the ClassDriver GenericHID demo so that it echoes back reports as indicated in the demo overview.
2009-07-31 03:35:24 +00:00
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
2009-07-31 03:22:08 +00:00
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
2009-07-30 14:59:57 +00:00
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
2009-07-30 14:35:42 +00:00
ec079c71d8
Minor cleanups to DualCDC ClassDriver device demo for clarity.
2009-07-30 14:12:00 +00:00
41babf1cb7
Fix incorrect configuration in the ClassDriver AudioOutput demo.
...
Make all audio device Class Driver functions require a reference to the Audio class instance, so that the endpoint size can be checked (and to standardize the APIs).
Make LEDs more responsive in the AudioOutput device demos.
2009-07-30 14:06:52 +00:00
41b54a2acd
Set all CDC and MassStorage device mode demos (LowLevel and ClassDriver) to use the USE_INTERNAL_SERIAL feature, add compile time warnings for devices which do not have an internal serial.
2009-07-30 11:03:58 +00:00
ce3ea6fb25
Added standard stream example to the ClassDriver CDC device demo.
...
Fix incorrect HWB button mask in the STK526 Buttons driver.
2009-07-30 10:54:57 +00:00
5ca1d7bf8f
Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does not support USB host mode.
2009-07-30 07:45:36 +00:00
bb05712efe
Added 404 errors to the RNDIS Webserver example.
2009-07-29 01:40:42 +00:00
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
2009-07-28 13:53:52 +00:00
23c1653efe
Make LowLevel AudioOutput demo work in the same way as the ClassDriver AudioOutput demo for LEDs output.
2009-07-28 10:49:33 +00:00
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
2009-07-28 10:46:20 +00:00
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
2009-07-27 23:19:17 +00:00
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
2009-07-23 10:39:10 +00:00
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
2009-07-23 08:00:12 +00:00
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
2009-07-21 04:46:48 +00:00
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
2009-07-21 02:48:41 +00:00
bf50959b80
Simplify SideShow GUID compares via a macro.
2009-07-20 14:51:19 +00:00
86819ba9d8
Fixes to unfinished SideShow demo to re-enable correct building after previous commit.
2009-07-20 14:27:14 +00:00
292fc9b65e
Move unfinished SideShow source files to nested Lib directory for clarity.
2009-07-20 14:23:47 +00:00
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
2009-07-20 14:07:02 +00:00
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
2009-07-16 15:00:10 +00:00
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
2009-07-16 08:15:27 +00:00
f85a53a31b
Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces.
...
Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman).
Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.
2009-07-15 05:49:19 +00:00
312748702a
Added better module summaries.
2009-07-14 07:33:06 +00:00
73d9fafc0f
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
2009-07-13 12:38:30 +00:00
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
2009-07-13 06:44:14 +00:00
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
2009-07-11 15:05:56 +00:00
b462f2d457
Minor correction to MagStripe demo to fix build problems.
2009-06-29 11:11:51 +00:00
86e6ed7f31
Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards.
...
Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index.
Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.
2009-06-29 09:30:06 +00:00
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
2009-06-28 13:39:08 +00:00
3cbdcd3686
Reduce struct name pollution - group typedef struct names by class driver name where appropriate.
2009-06-26 11:43:56 +00:00
bb23e55f11
Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.
2009-06-23 08:45:46 +00:00
189d0c7e66
Add demos/bootloaders/projects overview to the manual.
2009-06-22 11:32:51 +00:00
730624f745
Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.
2009-06-21 09:22:31 +00:00
00d0883507
Added USE_INTERNAL_SERIAL compile time option to automatically read out the internal unique serial number as the device's serial number descriptor on supported AVR models.
2009-06-20 11:43:26 +00:00
35bdada24b
Clean up RNDIS demo type define names.
2009-06-19 07:29:02 +00:00
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
2009-06-19 05:08:04 +00:00
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
2009-06-19 04:34:35 +00:00
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
2009-06-18 10:31:55 +00:00
2b21a1552d
Remove hardcoded DOT path from all Doxygen config files.
...
Better documentation for the MissleLauncher project - add credit to PyLauncher project.
2009-06-16 13:50:02 +00:00
dcf303762a
Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors.
...
Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
2009-06-16 07:17:22 +00:00
39d07c3da0
Added USB Missle Launcher project, submitted by Dave Fletcher.
2009-06-16 05:53:27 +00:00
c75f8bf223
More Doxygen fixes - ensure no undocumented function parameters.
2009-06-15 08:36:12 +00:00
234d0a39eb
Doxygen corrections to fix Doxygen warnings in some demos.
2009-06-15 07:23:14 +00:00
afe6ae1402
Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.
...
Split out common defines/types from class drivers into a seperate common class driver directory.
Make central USB Class driver dispatch headers, used for both device and host modes.
2009-06-14 15:55:13 +00:00
4d3a594f3e
Changed per-device controller preprocessor checks over to per-device series for better device control.
...
Fixed error in Endpoint.c using HSOFI rather than SOFI for counting elapsed milliseconds.
2009-06-14 07:44:02 +00:00
9798440ca4
Changed to new device mode Class Driver function name prefixes to make way for similar host mode Class drivers.
2009-06-11 06:15:45 +00:00
b2330934b9
Some minor whitespace corrections.
2009-06-11 01:52:53 +00:00
6be24e4404
Fixes to the MIDI device demos (ClassDriver, LowLevel); discard unused read-in events from the host, use standard MIDI event structure in low level demo rather than sending individual bytes.
2009-06-10 05:03:45 +00:00
e6881fd166
Error status LEDs shown when device endpoint configuration fails to complete.
...
MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready.
2009-06-08 07:46:07 +00:00
33a0184749
Converted device mode low-level demos to schedulerless.
2009-06-07 07:20:33 +00:00
2793c88fc6
Add master device Host demo makefile.
...
Copy and convert incomplete Bluetooth Host demo to the library.
2009-06-05 08:13:19 +00:00
f51017f8fb
Conversion of old incomplete SideShow demo to new APIs.
2009-06-05 07:52:53 +00:00
bf041e8bbf
Add new Incomplete device subdirectory for work-in-progress demos. Add incomplete SideShow demo.
2009-06-05 07:32:40 +00:00
dd2cc7eda7
Remove outdated AVRStudio project files from demos, projects, bootloaders. Fix makefiles of ClassDriver device demos.
2009-06-05 07:30:23 +00:00
b9b03aadb2
Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.
2009-06-05 07:16:33 +00:00
3d1baa6f95
Added multiple Report ID support to the HID class driver. Removed OUT endpoint support from HID driver (all OUT reports are now processed through control requests) as a seperate endpoint had issues with determining the exact output report length.
2009-06-05 02:23:31 +00:00
d37d419ffa
Fix Doxygen errors in demos.
2009-06-04 03:12:07 +00:00
4897ef8972
Ensure all USB device class drivers have the same three main functions as their interface for consistency.
2009-06-04 03:03:48 +00:00
a67bd74e3e
Minor documentation page updates.
...
Redocumented all device demos, now that they have changed over to the new USB class drivers.
Added C linkage to class drivers for C++ support.
Added prefixes to most of the class driver constants to prevent name clashes.
2009-06-04 02:55:30 +00:00
7c5444b89a
Removed new Start of Frame event from the library; performance suffered far too much and it was only useful in one of the standard classes (HID). Altered HID demos to use the previous method of tracking millisecond periods via a hardware timer rather than the SOF events.
...
Fixed MIDI class driver blocking on unread events to the host.
2009-06-02 10:54:32 +00:00
74b7c07e96
Add MIDI class driver, update MIDI device demo to use the new USB class driver. All device demos/projects have now been converted to the new library class drivers, although documentation is yet to be completed.
2009-06-01 12:01:53 +00:00
d1e5266036
Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.
...
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
2009-06-01 11:03:39 +00:00
7eb4eb7cdd
Fix all device mode demos broken in the recent API changes.
...
Change USBtoSerial Tx to polling-driven rather than interrupt driven, to ensure more time for the Rx interrupt to be serviced.
2009-05-26 04:46:35 +00:00
b7ef7f49c9
Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure.
2009-05-22 06:17:57 +00:00
d0806c817c
Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs.
2009-05-22 05:23:00 +00:00
b3a4d8512b
Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill).
2009-05-20 14:50:26 +00:00
2ee9fc7077
Rewritten event system to remove all macros, to make user code clearer.
...
Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
2009-05-18 10:05:21 +00:00
72c2922e38
Removed DESCRIPTOR_ADDRESS() macro as it was largely supurflous and only served to obfuscate code.
2009-05-17 07:44:00 +00:00
fabfdd454a
Fixed CDCHost not clearing configured endpoints and resetting configured endpoints mask when a partially enumerated invalid CDC interface is skipped.
2009-05-15 07:38:35 +00:00
32f0f605ef
Removed all user pipe/endpoint interrupt APIs, added internal library support for interrupt driven control endpoints when in device mode by defining INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.
2009-05-14 10:07:08 +00:00
4904b10ef6
Moved USB Host state machine code out from USBTask.c and into Host.c, where it more properly belongs.
2009-05-13 14:13:57 +00:00
958a1b4e2b
Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman).
...
Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues.
2009-05-12 08:28:02 +00:00
ea74397095
Fixed RNDISEthernet not working under Linux due to Linux requiring an "optional" request which was unhandled.
2009-05-11 08:58:53 +00:00
e0985b9950
Fixed bug in RNDISEthernet and DualCDC demos not using the correct USB_ControlRequest structure for control request data.
...
Fixed documentation showing incorrect USB mode support on the supported AVRs list.
2009-05-11 07:52:13 +00:00
3f48497874
Fix broken Set Feature/Clear Feature chapter 9 request (incorrect status stage clearing).
...
Commit for the 090510 release.
2009-05-10 05:23:35 +00:00
1f83abe6f4
Renamed the the TotalHIDReports element of the HID descriptor structure in the HID class demos to TotalReportDescriptors, to be more accurate of the element's function (thanks to Brian Dickman).
2009-05-07 22:33:36 +00:00
938f86d063
Fix build errors in Joystick device demo and library LEDs driver (on *nix systems).
2009-05-07 06:33:07 +00:00
a908773a13
Change device demos to cache the board button values in the same manner as the board joystick to maintain consistency.
2009-05-06 12:43:00 +00:00
63a8f66d92
Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button.
2009-05-06 07:50:34 +00:00
253deb996f
Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given wLength value when reading in the device descriptor.
...
Further documentation improvements - removed file view from the main library documentation, replaced file references in the documentation with group references.
2009-05-04 12:55:00 +00:00
f05224ec46
Fix minor build errors.
2009-05-01 05:20:23 +00:00
58e42c6ca9
Fixed SPI driver init function not clearing SPI2X bit when not needed.
...
Fixed PREVENT ALLOW MEDIUM REMOVAL command issuing in the MassStorageHost demo using incorrect parameters (thanks to Mike Alex).
Fixed MassStorageHost demo broken due to an incorrect if statement test in MassStore_GetReturnedStatus().
2009-04-26 10:29:59 +00:00
a504a3a010
Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless STATIC_ENDPOINT_CONFIGURATION compile time token.
2009-04-24 07:28:51 +00:00
c20a94a4e8
Fixed USB_RemoteWakeupEnabled flag never being set (the REMOTE WAKEUP Set Feature request was not being handled).
...
Renamed the FEATURELESS_CONTROL_ONLY_DEVICE compile-time token to CONTROL_ONLY_DEVICE.
2009-04-23 13:28:12 +00:00
9cec85bfd9
Documentation enhancements to improve documentation cross-references.
2009-04-22 14:28:55 +00:00
6865a7bc09
Applied STATIC_ENDPOINT_CONFIGURATION and FIXED_CONTROL_SIZE tokens to all Device mode demos to reduce binary size.
2009-04-22 13:30:03 +00:00
d860e9e842
USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode rather than having the library pass only partially read header data to the application.
...
The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure.
The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent.
2009-04-22 13:03:11 +00:00
e5e7eaee7a
Removed specialized Endpoint_ClearControl* and Pipe_ClearControl* macros in favour of the standard Endpoint_Clear* and Pipe_Clear* macros (Atmel have confirmed no effect from setting FIFOCON on control endpoints).
2009-04-21 06:05:50 +00:00
37b2130fb2
Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander).
2009-04-20 11:21:36 +00:00
619b0b7b6b
Spell checked non-source documentation pages.
2009-04-19 14:29:57 +00:00
663f449c10
Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman).
...
Capitolised the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and DSearch_Comp_Return_ErrorCodes_t enums.
Minor documentation improvements.
2009-04-19 11:43:21 +00:00
d38fa49cb6
More documentation changes for better module-level documentation rather than file-level documentation.
2009-04-17 05:04:21 +00:00
6380d057f8
Fixed CDC and USBtoSerial demos freezing where buffers were full while still transmitting or receiving (thanks to Peter Hand).
2009-04-17 04:10:30 +00:00
11bb2f2172
Renamed Serial_Stream driver to SerialStream to remain consistent with the rest of the library's naming scheme for files.
2009-04-17 00:20:00 +00:00
1c16ae399a
Partial commit: change references to Drivers/AT90USBXXX to Drivers/Peripheral.
2009-04-16 23:59:14 +00:00
8f6b4ddf76
Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev).
...
Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).
Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.
Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.
Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).
Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.
Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.
Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.
2009-04-16 08:50:34 +00:00
ef06bfd1c0
Fixed minor issue with the RNDISEthernet demo DHCP protocol decoder routine using incorrectly named variables (thanks to Jonathan Oakley).
...
Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei).
2009-04-15 00:56:12 +00:00
ecaf872177
Corrected AudioInput and AudioOutput demos, to fix endpoint underflows due to rounding in the sample reload timer.
2009-04-14 12:07:41 +00:00
fea5d08512
Adjusted sample CTC timer calculations in the AudioOutput and AudioInput demos to account for situations where the division results in a value with no remainder, requiring one to be subtracted from the result (thanks to Robin Theunis).
2009-04-14 08:17:24 +00:00
af02b5b0c9
Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan).
...
Fixed WriteNextReport code in the GenericHIDHost demo using incorrect parameter types and not selecting the correct endpoint.
2009-04-13 06:58:46 +00:00
d3484e6bdd
Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen).
2009-04-09 00:00:59 +00:00
cb7884da50
Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to outdated avr-libc versions.
2009-04-07 04:19:57 +00:00
6933f2e1a5
All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected.
2009-04-01 13:53:58 +00:00
ece9e3d599
Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile time options.
2009-04-01 07:43:50 +00:00
dc83f73ca3
Added new GenericHID device demo application.
2009-03-29 12:42:25 +00:00
ca641bba83
Corrected bitfields -- the smallest datatype required for each bitfield is now used, rather than relying on GCC to truncate unused bytes in bitfields (thanks to Walt Sacuta).
2009-03-26 03:22:02 +00:00
7cca7eb53d
Added missing documentation for AUDIO_SAMPLE_FREQUENCY configuration option in the audio device demos.
2009-03-25 10:51:24 +00:00
350141e085
Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incomming data.
...
Altered Project and Bootloader makefiles so that the path to the LUFA library can be set in one place.
2009-03-23 05:43:49 +00:00
ed031c1df2
Seperated out OTG, Device and Host mode demos into seperate folders for clarity. Adjusted makefiles so that the path to the LUFA library can be set in one place.
2009-03-20 06:34:41 +00:00
Dean Camera