8f5ab27dc9
Use the MIN() macro where possible instead of manual "(x < y) ? x : y" constructs.
2011-03-23 09:26:41 +00:00
aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
2011-03-21 10:20:42 +00:00
1a130eed6c
Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point instead of starting point, to give maximum reliability (thanks to Anton).
2011-03-15 04:02:15 +00:00
cf2411435c
Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called.
...
More UC3B architecture porting.
2011-02-26 20:22:33 +00:00
66c38cd940
Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).
2011-02-26 15:57:06 +00:00
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
2011-02-19 18:37:22 +00:00
0019fbd129
Add more const-ness to the stream endpoint/pipe functions where possible.
2011-02-13 21:27:24 +00:00
3d232953d9
Fix typos in the HID class bootloader makefile.
2011-02-11 20:00:48 +00:00
782614dbb5
Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.
...
Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.
2011-02-10 17:55:49 +00:00
5995c3f880
Oops - fix missing constants in the TempDataLogger FatFS diskio.h header file.
...
Add const to all project descriptor definitions for safety.
2011-02-06 18:03:29 +00:00
a95d224185
Update projects using FatFS and PetiteFatFS to the latest library versions.
2011-02-06 15:17:46 +00:00
279e1b6ece
Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank size under avrdude (thanks to Steffan Woltjer).
2011-02-04 18:17:31 +00:00
43b9d552bb
Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable().
2011-01-30 23:12:06 +00:00
9051d3beb0
Oops - fix up some calls to the old function names, include Serial Peripheral driver in the RNDISEthernetHost project.
2011-01-30 22:42:24 +00:00
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
2011-01-30 19:47:31 +00:00
30f6d2bfd8
Oops - forgot to add in LOGICAL MINIMUM and LOGICAL MAXIMUM report items into the standard library Joystick HID report descriptor macro. Add in support for joystick resolution reporting via PHYSICAL_MINIMUM and PHYSICAL_MAXIMUM items.
2011-01-30 14:40:24 +00:00
e6dc951630
Add new HID_DESCRIPTOR_VENDOR() macro, change over all projects and Device ClassDriver demos to use it.
...
Fix reversed byte ordering of multi-byte HID data.
Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index.
Removed the HID_IOF_NON_VOLATILE and HID_IOF_VOLATILE flags from HID INPUT items where the flag is invalid. Changed over HID OUTPUT items to use HID_IOF_NON_VOLATILE.
Change over MagStripe project to use HID_DESCRIPTOR_KEYBOARD() for its HID report. Change over MouseHostDevice demo to use HID_DESCRIPTOR_MOUSE() for its HID report.
2011-01-30 14:14:04 +00:00
26017b68b0
Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 for other uses in the future.
2011-01-22 17:48:06 +00:00
efd57cfe51
Abuse the the C preprocessor so that the HID macros can automatically encode data into the array from the HID macros automagically, by specifying the bit-width of the data, and the data itself as a single integer value of that width.
2011-01-17 19:44:48 +00:00
039a714ee4
New HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors.
...
Changed over all project and demo HID report descriptors to use the new HID report item macros.
Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/.
2011-01-16 19:34:28 +00:00
32830a2b82
Added new ADC_GET_CHANNEL_MASK() convenience macro to the ADC driver.
2011-01-16 16:13:22 +00:00
70d55f6e0c
Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.
...
Spell check source code files.
2011-01-13 22:56:49 +00:00
9c7594e7db
Oops - The DS1307 contains an unused "DayOfWeek" register that must be accounted for in the new unified DS1307 Time/Day read and write routines.
2011-01-13 21:01:05 +00:00
7776aa4e2e
Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition.
2011-01-13 19:14:38 +00:00
187ccb2e15
Fix typos and outdated information.
2011-01-10 21:53:38 +00:00
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
2011-01-10 18:43:34 +00:00
d126146887
The FAST_STREAM_TRANSFERS compile time option has been removed due to lack of use and low cost/benefit ratio.
...
Add GCC_FORCE_POINTER_ACCESS() macro use to the RingBuffer library header, to attempt to force GCC into producing more efficient code for manipulating the buffers.
2011-01-08 00:54:30 +00:00
1d433d4506
Update copyright year on all source files.
2011-01-01 13:00:56 +00:00
64fe1cd0b2
Rename RingBuffer header functions and typedefs from RingBuff_* to RingBuffer_* so that it matches the header name.
2010-12-31 14:47:20 +00:00
a8b66f318d
Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.
2010-12-26 14:55:26 +00:00
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
2010-12-26 14:25:34 +00:00
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
2010-12-26 13:01:37 +00:00
12418e6eaf
Combined page and word ISP programming mode code in the AVRISP-MKII clone project to reduce compiled size and increase maintainability of the code.
2010-12-25 21:36:17 +00:00
958b20a8ef
Fixed possible programming problem in the AVRISP-MKII clone project when programming specific patterns into a target memory space that is only byte (not page) addressable.
2010-12-25 17:49:30 +00:00
7d83bd0dcc
Add DEVICE_STATE_AS_GPIOR=0 compile time option to the library projects, to reduce compiled binary size.
2010-12-24 18:04:51 +00:00
a57287a59f
Fix a few more incorrectly ordered endpoint initialisations in the device demos.
2010-12-17 20:26:14 +00:00
0381399f66
Add missing AVRStudio4 project file for the MIDIToneGenerator project.
2010-12-17 19:59:19 +00:00
0aa950c241
Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.).
...
Add extra comments to the ISPTarget.c source file in the AVRISP-MKII clone project.
2010-12-13 06:05:05 +00:00
46677b4589
Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski).
2010-12-12 16:50:45 +00:00
b67f9f3669
Added new RingBuffer_Peek() function to the lightweight ring buffer headers.
2010-12-12 16:39:46 +00:00
8a7351c760
Added new completed MIDIToneGenerator project.
2010-12-03 03:51:46 +00:00
82fa9149d7
Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground.
2010-11-27 01:27:55 +00:00
7704d2915c
Fix typos in the XPLAINBridge project preventing compilation.
2010-11-26 04:27:52 +00:00
9f7883fa2b
Added ability to write protect Mass Storage disk write operations from the host OS.
2010-11-26 04:16:47 +00:00
b634ec50a0
Changed the XPLAINBridge software UART to use the regular CTC mode instead of the alternative CTC mode via the Input Capture register, to reduce user confusion.
2010-11-25 03:20:01 +00:00
fd77bf5c94
Make the incomplete MIDIToneGenerator project work with up to three notes, using a LRU (Least Recently Used) algorithm to discard the oldest set note when the note table becomes full.
2010-11-25 02:46:35 +00:00
857a82674f
Readd incomplete MIDIToneGenerator project, which can now correctly generate up to three simultaneous notes from MIDI channel 0.
2010-11-24 13:57:44 +00:00
423d4018f0
Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy.
...
Minor documentation improvements.
2010-11-23 06:56:24 +00:00
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
2010-11-22 05:24:33 +00:00
3988639823
Oops - reduce size of each ring buffer in the USBtoSerial and Benito projects so that the RAM is not overflowed on the smaller USB AVR targets (thanks to Andrei from Microsin.ru).
2010-11-21 10:01:01 +00:00
8f7437dda2
Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
2010-11-17 05:46:18 +00:00
cbc00c843a
Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.
2010-11-16 13:14:27 +00:00
a9f313afa9
Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates.
...
Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
2010-11-16 12:30:00 +00:00
002cd6df49
Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light).
2010-11-16 01:37:43 +00:00
b27f35536d
Fixed incorrect event name in the Benito project.
2010-11-15 08:24:18 +00:00
f2324fc2b4
Second patch to fix incorrect PDI/TPI programming speed.
2010-11-14 06:44:57 +00:00
d41cd9a41a
Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz.
2010-11-12 06:24:01 +00:00
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
2010-11-10 12:38:25 +00:00
0ce2950d81
Added board hardware driver support for the Adafruit U4 breakout board.
...
Fixed calculation of timer register reload values derived from F_CPU; must subtract one from the division result for the compare value to be correct.
Change AVRISP-MKII rescue clock speed to 4MHz to ensure that a 125KHz ISP speed works regardless of the target's fuses (i.e. DIV8 set).
2010-11-08 03:41:48 +00:00
bac860b173
Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor.
2010-11-07 12:54:52 +00:00
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
2010-11-05 05:15:20 +00:00
85cf202737
Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full.
2010-11-03 11:24:34 +00:00
5ce8380a7d
Fix XPLAINBridge code broken during the changes to the Rescue Clock generation in the AVRISP-MKII clone project.
...
Change over all low level host mode project's descriptor comparator routines to perform the descriptor casting in a temp variable to make the code clearer and easier to modify (despite being more verbose).
2010-11-02 11:16:36 +00:00
3bf760ad7d
Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times when 125KHz ISP programming mode is selected.
2010-11-02 07:57:23 +00:00
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
2010-10-28 06:08:58 +00:00
55538dcef3
Add descriptor class, subclass and protocol constants to the class drivers, modify all demos to use them where possible.
...
Move out private/internal host class driver constants to the common class driver headers, so that they can be used in the Low Level host mode demos.
Ensure all demos, projects and bootloaders use the class driver constants where possible to minimise code repetition.
2010-10-25 12:42:55 +00:00
b37d77eab3
All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included.
...
All LowLevel demos changed to use the constants and types defined in the USB class drivers.
2010-10-24 22:53:57 +00:00
421479a4b9
Fix incomplete StandaloneProgrammer project code not compiling due to the recent API changes in the LUFA core.
2010-10-13 14:25:36 +00:00
31daf04c6a
Fix SoftUART.c not compiling due to accidental check in of changes not yet complete in the rest of the XPLAINBridge project code.
2010-10-13 14:23:23 +00:00
3661ae8dfb
Minor documentation corrections.
2010-10-13 14:10:24 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
3693916cd3
Fix Webserver project code not compiling due to the changes to the USB mode selection constant names.
2010-10-12 12:25:05 +00:00
3a03da9705
Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules.
2010-10-10 06:23:45 +00:00
93793679c9
Revert change to the AVRISP-MKII project for fuse byte programming via the CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
2010-10-02 10:07:24 +00:00
a447ae134f
Fixed broken lock byte programming in the AVRISP-MKII clone project for some XMEGA targets.
2010-10-02 10:02:24 +00:00
824ce10390
Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used.
2010-10-02 08:41:08 +00:00
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
2010-10-01 12:01:54 +00:00
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
2010-09-30 07:56:47 +00:00
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
2010-09-30 06:23:38 +00:00
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
2010-09-29 13:56:52 +00:00
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
2010-09-28 12:14:06 +00:00
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
2010-09-24 06:59:28 +00:00
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
2010-09-24 06:45:11 +00:00
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
2010-09-15 03:00:29 +00:00
84696c727d
Added board hardware driver support for the BUI development board.
2010-09-14 11:11:54 +00:00
def0e0ff1b
Remove incomplete MIDIToneGenerator project.
2010-09-13 10:07:45 +00:00
fdcb486e22
Fix typos in the project overview text files.
2010-09-09 13:39:52 +00:00
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
2010-09-09 13:05:57 +00:00
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
2010-08-31 12:33:21 +00:00
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
2010-08-31 07:32:48 +00:00
b3c6599bb7
Remove remaining void* descriptor casts in the projects and demos that were not removed when the GetDescriptor callback function's signature was altered.
2010-08-29 13:21:14 +00:00
263178fbb6
Add better description of the Ultra-Lightweight Ring Buffer header files.
2010-08-29 07:49:36 +00:00
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
2010-08-24 13:02:38 +00:00
1be3436e89
Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.
...
Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.
2010-08-22 02:45:20 +00:00
81998ce297
Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
2010-08-22 01:42:09 +00:00
4f114e5766
Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger).
...
Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant SCSI_Codes.h file as these values are part of the MassStorage Class Driver.
2010-08-18 10:33:21 +00:00
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
2010-08-09 10:20:10 +00:00
9274610a48
Commit for the 100807 release.
2010-08-09 01:55:02 +00:00
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
2010-08-08 08:30:42 +00:00
98947e3750
Ensure all demos now compile in C99 standards mode, and not GNU99 (C99 + GNU extensions).
2010-08-03 11:13:06 +00:00
Dean Camera