6ee79029d5
Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target.
2012-03-05 20:25:46 +00:00
9ffeac6992
Update code and StaticAnlysisTest so that missingInclude warnings do not have to be suppressed, and so that all code except for third party libraries can be checked.
...
Update SingleUSBModeTest makefile to separate out the messages from the test commands.
2012-03-04 16:15:59 +00:00
e408f92b26
Minor documentation improvements.
2012-03-04 14:43:30 +00:00
7416ebd7c6
Update StaticAnalysisTest to check for missing header files. Fix found incorrect header file paths in the demos and projects.
2012-02-29 17:04:04 +00:00
bb85d083a7
Fix warnings and errors found by the new cppcheck provided static code analysis.
2012-02-28 20:40:24 +00:00
b7f4370c8e
Oops - don't reset AVRISP-MKII timeout in XPROG mode, as this is synchronous serial and data is always received regardless of attached or non-attached target.
2012-02-19 01:30:53 +00:00
7a1033025b
Minor documentation fixes.
...
Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.
2012-02-08 21:31:03 +00:00
18b82b3575
Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1).
...
Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
2012-02-08 18:29:17 +00:00
fdab3aef86
Add (still preliminary) support for the ATXMEGA64A4 and ATXMEGA128A4. Fix minor error in the AVRISP-MKII clone project descriptors.
2012-02-05 21:59:35 +00:00
252bd7bb2c
Fixed invalid PID value used in the TempDataLogger project host application (thanks to Anupam Pathak).
2012-02-05 13:16:08 +00:00
f1b6ddb710
Update file contributor copyrights for 2012.
2012-02-04 22:38:44 +00:00
2c806f6cee
Update file header copyrights for 2012.
2012-02-04 22:32:30 +00:00
df33278d91
Minor documentation corrections.
2012-02-04 15:17:49 +00:00
fc4d3ab400
Minor documentation improvements.
2012-02-01 21:28:25 +00:00
956f9e3709
Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
2012-01-30 16:54:09 +00:00
dd312cead4
Make all AVRISP-MKII programmer parameters readable, since there's no real good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.
2012-01-23 20:28:34 +00:00
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
2012-01-02 05:43:23 +00:00
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
2011-12-23 01:51:39 +00:00
798cc84ff5
Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming session is exited.
2011-11-29 13:33:28 +00:00
24ca2d49fe
Bit-bang ISP in the AVRISP-MKII clone project needs to set MOSI pin to the MSB of the data byte on startup, not the LSB.
2011-11-29 11:30:25 +00:00
eb2e883fd3
Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities.
2011-11-18 06:26:51 +00:00
e30be658c9
Add missing SVN eol-style property to ensure that source code line endings and converted to the native values on checkout.
2011-11-09 23:35:16 +00:00
46aea9d4ce
Update the incomplete StandaloneProgrammer project to be compatible with the latest LUFA core API.
2011-11-09 23:24:11 +00:00
b057041660
Use strcat() in the HTTPServer project instead of using strcpy() and strlen().
2011-11-09 12:47:15 +00:00
6564416479
Update host C# applications for VS2010. Make LEDNotifier project host applications only display valid COM port names for the PC it is run on, rather than all possible port names. Add missing property files to the TempDataLogger project host application.
2011-11-09 12:45:10 +00:00
eb5b8a32e4
Added INVERTED_ISP_MISO compile time option to the AVRISP-MKII clone project (thanks to Chuck Rohs).
2011-10-30 14:12:11 +00:00
ab43251bf9
Minor documentation fixes.
2011-10-30 07:09:44 +00:00
3aa8a69246
Fixed AVRISP-MKII Clone compile warning on AVR8 U4 targets even when NO_VTARGET_DETECT is enabled.
2011-10-18 11:31:03 +00:00
c6d6bdae0a
Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair).
2011-10-12 05:31:35 +00:00
db73b11244
Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair).
2011-10-07 04:40:56 +00:00
b5682f2c44
Add project name to the Doxygen makefile target output.
2011-09-21 06:45:09 +00:00
aae59857a2
Add const qualifier to all PROGMEM data to prevent warnings in newer AVR-GCC compiler versions.
2011-09-21 06:25:31 +00:00
d881e0cbf6
Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov).
2011-09-07 12:05:37 +00:00
e64f4b0cd9
Update the TempDataLogger project and driver documentation to use the new TWI_BITLENGTH_FROM_FREQ() macro.
2011-09-02 04:41:43 +00:00
9708b45e69
Minor documentation corrections.
2011-08-17 14:51:05 +00:00
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
2011-08-16 05:53:04 +00:00
ef4cff29c3
Fix TempDataLogger project logging interval always being 500ms more than the requested interval.
2011-08-16 04:07:39 +00:00
aceb015ea7
Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden).
2011-07-30 02:49:59 +00:00
025742fca8
Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch).
2011-07-26 03:07:32 +00:00
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
2011-07-19 07:02:19 +00:00
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
2011-07-15 08:46:08 +00:00
3309c00a99
Minor demo/project documentation and style fixes.
2011-07-11 05:49:53 +00:00
d9c16402b9
Add missing device deconfiguration-on-error statements to the host mode demos and projects.
2011-07-08 07:56:40 +00:00
137ce280c1
Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration instead of manual host state machine manipulations in the main application task.
...
Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device.
Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, by changing the USB_* prefix to USB_Device_* or USB_Host_*.
Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required.
Altered the USB_Host_SetDeviceConfiguration() function to update the new USB_Host_ConfigurationNumber global as required.
Moved out the Host mode standard request convenience/helper functions from the architecture specific Host driver files to the architecture agnostic HostStandardReq.c driver file.
2011-07-08 07:25:56 +00:00
7932ce86bd
Add the GCC -fno-split-wide-types compile time option to some of the larger user projects to reduce the compiled application size.
2011-07-06 02:10:01 +00:00
a09e1cb53b
Switch the HTTP Webserver project to use the safer strlcpy() instead of strncpy() to save on manual null-termination.
2011-07-04 09:19:37 +00:00
04660d3793
Seperate out the device demos and project's configuration descriptor structure definitions to clearly indicate what descriptors belong to which interface.
2011-07-01 05:26:25 +00:00
b162540099
Minor documentation fix for the RelayBoard project.
2011-06-30 12:27:01 +00:00
ca9f89ce82
Add new "checksource" target to the library makefiles, for automated source file existance checking.
2011-06-20 14:38:21 +00:00
dab7e06a4a
Split HIDReportViewer project sub-components into seperate functions for readability/convenience.
2011-06-20 02:36:52 +00:00
ea3b5c7423
More cosmetic data output changes to the HIDReportViewer project.
2011-06-20 02:22:34 +00:00
91bc546be0
Make HIDReportViewer project show the IN, OUT and DATA report sizes as both bits and (rounded) bytes.
2011-06-20 02:08:52 +00:00
bb0b761c65
Make the HID Report Parser Get/Set Report Item routines fail if a NULL pointer to a report item is given.
...
Minor visual enhancement to the HIDReportViewer project.
2011-06-20 01:57:22 +00:00
5e0c807708
Fix incorrect printf format specifier in the HIDReportViewer project.
2011-06-20 01:33:42 +00:00
2e6370a6b9
Add missing project files for the new HIDReportViewer project to upgrade its status to a finished (working) project.
2011-06-19 04:47:53 +00:00
5ee8068f2c
Move the HIDReportViewer project into the normal Projects/ folder and out of the Incomplete/ projects folder.
2011-06-19 04:32:58 +00:00
6e0adb9872
Switch to using the standard printf() format specifiers in the HIDReportViewer project.
2011-06-19 04:29:03 +00:00
00acc95ff6
Add new incomplete HIDReportViewer project.
2011-06-16 13:37:45 +00:00
0ec2b55a7c
Add missing SVN eol-style properties to source files to prevent mixed end-of-line characters.
2011-06-16 12:18:46 +00:00
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
2011-06-05 13:55:56 +00:00
2731c3a8ae
Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates.
...
Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates.
Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed.
Fix broken LowLevel audio demo descriptors.
Minor documentation fixes.
2011-06-03 07:56:12 +00:00
f01a05415c
Spell check library source code files.
2011-06-01 14:33:40 +00:00
0b6d5467bc
Oops - revert commit of an incomplete port of the AVRISP-MKII project.
2011-05-29 12:47:56 +00:00
ea922c98d1
Added new incomplete AudioInputHost Host LowLevel demo.
...
Added missing Audio class control request definitions.
Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
2011-05-29 12:41:14 +00:00
348bf33b18
Add the MIDIToneGenerator project to the Projects/ directory makefile clean rule.
2011-05-27 03:45:45 +00:00
6e7fc21a94
Fix incorrect macro guard in the UC3 EndpointStream header file.
...
Fix incorrect project name in the Projects/ folder makefile.
2011-05-26 11:37:40 +00:00
edc4db41f4
Update Webserver project to remove DHCP IP configuration status notification.
2011-05-26 10:50:22 +00:00
24ea531fab
Update MediaController project to remove the Record usage (not often needed) and explicitly declare each usage for maximum clarity.
2011-05-23 13:19:13 +00:00
b88e0a7b90
Add new MediaController project, a simple Media Playback control manipulator (Play/Pause/Next Track/Volume/etc.).
2011-05-23 12:54:15 +00:00
4343e68779
Correct errors in the DHCP Server application in the Webserver project, that was causing random server restarts and/or incorrectly allocated IP addresses.
2011-05-23 07:13:45 +00:00
3cba88e4c0
Add RNDIS Device support to the Webserver project, so that the files stored on the device can be viewed from a web-browser while the board is plugged into a host machine.
2011-05-22 08:28:40 +00:00
e0852408de
Replace cast-as-char* byte access of multibyte variables with proper shifts and masks to preserve endianness across different architectures.
2011-04-13 06:12:52 +00:00
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
2011-04-10 06:43:02 +00:00
c263ea837a
Move global interrupt enable/disable functions out to Common.h and document them.
2011-04-08 05:40:25 +00:00
de9bd767dc
Correct UC3 global interrupt functions.
...
Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.
Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.
2011-04-08 05:05:05 +00:00
70284d390f
Add in a new common Delay_MS() function, which provides a blocking delay for all architectures.
...
Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.
Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.
2011-04-08 04:49:20 +00:00
899df7d331
Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
...
Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
2011-04-04 12:52:30 +00:00
8f5ab27dc9
Use the MIN() macro where possible instead of manual "(x < y) ? x : y" constructs.
2011-03-23 09:26:41 +00:00
aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
2011-03-21 10:20:42 +00:00
1a130eed6c
Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point instead of starting point, to give maximum reliability (thanks to Anton).
2011-03-15 04:02:15 +00:00
cf2411435c
Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called.
...
More UC3B architecture porting.
2011-02-26 20:22:33 +00:00
66c38cd940
Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).
2011-02-26 15:57:06 +00:00
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
2011-02-19 18:37:22 +00:00
0019fbd129
Add more const-ness to the stream endpoint/pipe functions where possible.
2011-02-13 21:27:24 +00:00
3d232953d9
Fix typos in the HID class bootloader makefile.
2011-02-11 20:00:48 +00:00
782614dbb5
Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.
...
Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.
2011-02-10 17:55:49 +00:00
5995c3f880
Oops - fix missing constants in the TempDataLogger FatFS diskio.h header file.
...
Add const to all project descriptor definitions for safety.
2011-02-06 18:03:29 +00:00
a95d224185
Update projects using FatFS and PetiteFatFS to the latest library versions.
2011-02-06 15:17:46 +00:00
279e1b6ece
Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank size under avrdude (thanks to Steffan Woltjer).
2011-02-04 18:17:31 +00:00
43b9d552bb
Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable().
2011-01-30 23:12:06 +00:00
9051d3beb0
Oops - fix up some calls to the old function names, include Serial Peripheral driver in the RNDISEthernetHost project.
2011-01-30 22:42:24 +00:00
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
2011-01-30 19:47:31 +00:00
30f6d2bfd8
Oops - forgot to add in LOGICAL MINIMUM and LOGICAL MAXIMUM report items into the standard library Joystick HID report descriptor macro. Add in support for joystick resolution reporting via PHYSICAL_MINIMUM and PHYSICAL_MAXIMUM items.
2011-01-30 14:40:24 +00:00
e6dc951630
Add new HID_DESCRIPTOR_VENDOR() macro, change over all projects and Device ClassDriver demos to use it.
...
Fix reversed byte ordering of multi-byte HID data.
Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index.
Removed the HID_IOF_NON_VOLATILE and HID_IOF_VOLATILE flags from HID INPUT items where the flag is invalid. Changed over HID OUTPUT items to use HID_IOF_NON_VOLATILE.
Change over MagStripe project to use HID_DESCRIPTOR_KEYBOARD() for its HID report. Change over MouseHostDevice demo to use HID_DESCRIPTOR_MOUSE() for its HID report.
2011-01-30 14:14:04 +00:00
26017b68b0
Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 for other uses in the future.
2011-01-22 17:48:06 +00:00
efd57cfe51
Abuse the the C preprocessor so that the HID macros can automatically encode data into the array from the HID macros automagically, by specifying the bit-width of the data, and the data itself as a single integer value of that width.
2011-01-17 19:44:48 +00:00
039a714ee4
New HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors.
...
Changed over all project and demo HID report descriptors to use the new HID report item macros.
Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/.
2011-01-16 19:34:28 +00:00
32830a2b82
Added new ADC_GET_CHANNEL_MASK() convenience macro to the ADC driver.
2011-01-16 16:13:22 +00:00
70d55f6e0c
Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.
...
Spell check source code files.
2011-01-13 22:56:49 +00:00
9c7594e7db
Oops - The DS1307 contains an unused "DayOfWeek" register that must be accounted for in the new unified DS1307 Time/Day read and write routines.
2011-01-13 21:01:05 +00:00
7776aa4e2e
Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition.
2011-01-13 19:14:38 +00:00
187ccb2e15
Fix typos and outdated information.
2011-01-10 21:53:38 +00:00
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
2011-01-10 18:43:34 +00:00
d126146887
The FAST_STREAM_TRANSFERS compile time option has been removed due to lack of use and low cost/benefit ratio.
...
Add GCC_FORCE_POINTER_ACCESS() macro use to the RingBuffer library header, to attempt to force GCC into producing more efficient code for manipulating the buffers.
2011-01-08 00:54:30 +00:00
1d433d4506
Update copyright year on all source files.
2011-01-01 13:00:56 +00:00
64fe1cd0b2
Rename RingBuffer header functions and typedefs from RingBuff_* to RingBuffer_* so that it matches the header name.
2010-12-31 14:47:20 +00:00
a8b66f318d
Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.
2010-12-26 14:55:26 +00:00
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
2010-12-26 14:25:34 +00:00
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
2010-12-26 13:01:37 +00:00
12418e6eaf
Combined page and word ISP programming mode code in the AVRISP-MKII clone project to reduce compiled size and increase maintainability of the code.
2010-12-25 21:36:17 +00:00
958b20a8ef
Fixed possible programming problem in the AVRISP-MKII clone project when programming specific patterns into a target memory space that is only byte (not page) addressable.
2010-12-25 17:49:30 +00:00
7d83bd0dcc
Add DEVICE_STATE_AS_GPIOR=0 compile time option to the library projects, to reduce compiled binary size.
2010-12-24 18:04:51 +00:00
a57287a59f
Fix a few more incorrectly ordered endpoint initialisations in the device demos.
2010-12-17 20:26:14 +00:00
0381399f66
Add missing AVRStudio4 project file for the MIDIToneGenerator project.
2010-12-17 19:59:19 +00:00
0aa950c241
Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.).
...
Add extra comments to the ISPTarget.c source file in the AVRISP-MKII clone project.
2010-12-13 06:05:05 +00:00
46677b4589
Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski).
2010-12-12 16:50:45 +00:00
b67f9f3669
Added new RingBuffer_Peek() function to the lightweight ring buffer headers.
2010-12-12 16:39:46 +00:00
8a7351c760
Added new completed MIDIToneGenerator project.
2010-12-03 03:51:46 +00:00
82fa9149d7
Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground.
2010-11-27 01:27:55 +00:00
7704d2915c
Fix typos in the XPLAINBridge project preventing compilation.
2010-11-26 04:27:52 +00:00
9f7883fa2b
Added ability to write protect Mass Storage disk write operations from the host OS.
2010-11-26 04:16:47 +00:00
b634ec50a0
Changed the XPLAINBridge software UART to use the regular CTC mode instead of the alternative CTC mode via the Input Capture register, to reduce user confusion.
2010-11-25 03:20:01 +00:00
fd77bf5c94
Make the incomplete MIDIToneGenerator project work with up to three notes, using a LRU (Least Recently Used) algorithm to discard the oldest set note when the note table becomes full.
2010-11-25 02:46:35 +00:00
857a82674f
Readd incomplete MIDIToneGenerator project, which can now correctly generate up to three simultaneous notes from MIDI channel 0.
2010-11-24 13:57:44 +00:00
423d4018f0
Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy.
...
Minor documentation improvements.
2010-11-23 06:56:24 +00:00
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
2010-11-22 05:24:33 +00:00
3988639823
Oops - reduce size of each ring buffer in the USBtoSerial and Benito projects so that the RAM is not overflowed on the smaller USB AVR targets (thanks to Andrei from Microsin.ru).
2010-11-21 10:01:01 +00:00
8f7437dda2
Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
2010-11-17 05:46:18 +00:00
cbc00c843a
Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.
2010-11-16 13:14:27 +00:00
a9f313afa9
Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates.
...
Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
2010-11-16 12:30:00 +00:00
002cd6df49
Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light).
2010-11-16 01:37:43 +00:00
b27f35536d
Fixed incorrect event name in the Benito project.
2010-11-15 08:24:18 +00:00
f2324fc2b4
Second patch to fix incorrect PDI/TPI programming speed.
2010-11-14 06:44:57 +00:00
d41cd9a41a
Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz.
2010-11-12 06:24:01 +00:00
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
2010-11-10 12:38:25 +00:00
0ce2950d81
Added board hardware driver support for the Adafruit U4 breakout board.
...
Fixed calculation of timer register reload values derived from F_CPU; must subtract one from the division result for the compare value to be correct.
Change AVRISP-MKII rescue clock speed to 4MHz to ensure that a 125KHz ISP speed works regardless of the target's fuses (i.e. DIV8 set).
2010-11-08 03:41:48 +00:00
bac860b173
Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor.
2010-11-07 12:54:52 +00:00
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
2010-11-05 05:15:20 +00:00
85cf202737
Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full.
2010-11-03 11:24:34 +00:00
5ce8380a7d
Fix XPLAINBridge code broken during the changes to the Rescue Clock generation in the AVRISP-MKII clone project.
...
Change over all low level host mode project's descriptor comparator routines to perform the descriptor casting in a temp variable to make the code clearer and easier to modify (despite being more verbose).
2010-11-02 11:16:36 +00:00
3bf760ad7d
Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times when 125KHz ISP programming mode is selected.
2010-11-02 07:57:23 +00:00
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
2010-10-28 06:08:58 +00:00
55538dcef3
Add descriptor class, subclass and protocol constants to the class drivers, modify all demos to use them where possible.
...
Move out private/internal host class driver constants to the common class driver headers, so that they can be used in the Low Level host mode demos.
Ensure all demos, projects and bootloaders use the class driver constants where possible to minimise code repetition.
2010-10-25 12:42:55 +00:00
b37d77eab3
All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included.
...
All LowLevel demos changed to use the constants and types defined in the USB class drivers.
2010-10-24 22:53:57 +00:00
421479a4b9
Fix incomplete StandaloneProgrammer project code not compiling due to the recent API changes in the LUFA core.
2010-10-13 14:25:36 +00:00
31daf04c6a
Fix SoftUART.c not compiling due to accidental check in of changes not yet complete in the rest of the XPLAINBridge project code.
2010-10-13 14:23:23 +00:00
3661ae8dfb
Minor documentation corrections.
2010-10-13 14:10:24 +00:00
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
2010-10-13 14:05:35 +00:00
3693916cd3
Fix Webserver project code not compiling due to the changes to the USB mode selection constant names.
2010-10-12 12:25:05 +00:00
3a03da9705
Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules.
2010-10-10 06:23:45 +00:00
93793679c9
Revert change to the AVRISP-MKII project for fuse byte programming via the CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
2010-10-02 10:07:24 +00:00
a447ae134f
Fixed broken lock byte programming in the AVRISP-MKII clone project for some XMEGA targets.
2010-10-02 10:02:24 +00:00
824ce10390
Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used.
2010-10-02 08:41:08 +00:00
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
2010-10-01 12:01:54 +00:00
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
2010-09-30 07:56:47 +00:00
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
2010-09-30 06:23:38 +00:00
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
2010-09-29 13:56:52 +00:00
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
2010-09-28 12:14:06 +00:00
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
2010-09-24 06:59:28 +00:00
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
2010-09-24 06:45:11 +00:00
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
2010-09-15 03:00:29 +00:00
84696c727d
Added board hardware driver support for the BUI development board.
2010-09-14 11:11:54 +00:00
def0e0ff1b
Remove incomplete MIDIToneGenerator project.
2010-09-13 10:07:45 +00:00
fdcb486e22
Fix typos in the project overview text files.
2010-09-09 13:39:52 +00:00
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
2010-09-09 13:05:57 +00:00
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
2010-08-31 12:33:21 +00:00
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
2010-08-31 07:32:48 +00:00
b3c6599bb7
Remove remaining void* descriptor casts in the projects and demos that were not removed when the GetDescriptor callback function's signature was altered.
2010-08-29 13:21:14 +00:00
263178fbb6
Add better description of the Ultra-Lightweight Ring Buffer header files.
2010-08-29 07:49:36 +00:00
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
2010-08-24 13:02:38 +00:00
1be3436e89
Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.
...
Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.
2010-08-22 02:45:20 +00:00
81998ce297
Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
2010-08-22 01:42:09 +00:00
4f114e5766
Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger).
...
Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant SCSI_Codes.h file as these values are part of the MassStorage Class Driver.
2010-08-18 10:33:21 +00:00
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
2010-08-09 10:20:10 +00:00
9274610a48
Commit for the 100807 release.
2010-08-09 01:55:02 +00:00
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
2010-08-08 08:30:42 +00:00
98947e3750
Ensure all demos now compile in C99 standards mode, and not GNU99 (C99 + GNU extensions).
2010-08-03 11:13:06 +00:00
48c5cdced4
Hide the PROGMEM attribute from Doxygen, as it appears to confuse the parser in some situations.
2010-08-02 08:53:23 +00:00
ff09cf9c73
Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.
...
Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.
Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.
Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.
Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.
Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.
2010-08-01 14:03:13 +00:00
fb0e6597b6
Invert the logic for the VBUS power light in the AVRISP-MKII project for the USBTINY-MKII board target.
2010-08-01 06:53:08 +00:00
9597b33c33
Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).
2010-07-31 06:55:47 +00:00
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
2010-07-30 10:58:16 +00:00
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
2010-07-30 09:48:35 +00:00
2034141a7e
Spell check more of the third party libraries used by LUFA.
2010-07-30 08:29:53 +00:00
24e621a8d8
Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.
...
Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.
2010-07-30 03:52:11 +00:00
7c8d16fd7a
Oops - need to turn off USART via control register B before reconfiguring, fix ordering of USART control register modifications in the Benito and USBtoSerial projects.
2010-07-30 01:11:04 +00:00
28401f7bb7
Spell check all source files once again to find any typos.
2010-07-29 16:20:45 +00:00
ca007f91f2
Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect operation to occur (thanks to Bob Paddock).
2010-07-29 15:14:56 +00:00
62022252ea
Add special support to the AVRISP-MKII for the new model USBTINY-MKII's additional LED to indicate target power source.
...
Add support to the USBTINY-MKII's additional LED in the board's LED driver header.
Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED.
2010-07-29 13:04:53 +00:00
30c2b620de
Remove obsolete macros and preprocessor checks from the AVRISP-MKII project's V2Protocol command handler header file.
2010-07-29 07:20:33 +00:00
de5b16909a
Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.
...
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
2010-07-29 07:09:57 +00:00
be2a7d4598
Move over message ID specific header data to unions inside the standard TMC header structure, so that all header data is read in one chunk in the incomplete TMC demo.
2010-07-27 11:26:47 +00:00
cd39c38d5f
Rename reserved members of all structs so that they are uniformly named across all demos/projects/bootloaders.
...
Added start of the Incomplete TMC demo's command parser code.
2010-07-26 07:28:40 +00:00
0803cf00ac
Add missing INTERRUPT_CONTROL_ENDPOINT compile time option to the Mass Storage device projects/demos and incomplete Test and Measurement Class demo, which was accidentally removed during the makefile updates.
...
Alter Test and Measurement Class demo's request handlers to accept, process and correctly return the fields indicated in the specification.
2010-07-26 04:57:50 +00:00
4c9425c0d5
Added periodic flush timer to the Benito project. Alter the serial transmission code so that sent bytes do not block the remainder of the main program code from running.
2010-07-25 11:59:55 +00:00
2461ae508c
Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI and TPI requests return failure.
2010-07-22 12:34:32 +00:00
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
2010-07-21 16:19:32 +00:00
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
2010-07-21 14:00:51 +00:00
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
2010-07-19 14:00:44 +00:00
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
2010-07-18 07:31:57 +00:00
Dean Camera