41ad6bd6d7
New revision Benito hardware will be 16MHz, and use the ATMEGA32U2. Change makefile to suit.
2010-01-21 06:25:07 +00:00
36dec204f1
Update Benito project -- device should be reset when DTR is *asserted* not deasserted.
2010-01-21 06:13:54 +00:00
1d2bc47eba
Clean up of the altered XPLAINBridge project.
2010-01-19 05:38:21 +00:00
60fd0ff418
Changed XPLAINBridge project to be both a USB to USART bridge and a PDI programmer, based on the state of a mode select pin.
2010-01-19 05:27:58 +00:00
2746154652
Added master mode hardware TWI driver.
...
Fixed a bug in the incomplete Webserver project, where the packet data was not being written to and read from the correct buffer address.
2010-01-19 00:25:26 +00:00
c299552ab3
Oops - missing brace in the updated Benito code causing compilation to fail.
2010-01-17 06:28:25 +00:00
f9781ca6ff
Fix the Benito project not pulsing the target's /RESET line when DTR is de-asserted.
2010-01-17 05:32:41 +00:00
f3d370a777
Clean up and add more comments to the AVRISP-MKII project. Make sure the SPI_MULTI command handler supports multiple packet responses. Use slightly smaller/faster repeated indirect-load commands when retrieving the PDI target's memory CRCs.
2010-01-17 04:39:33 +00:00
77dda302ac
Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
...
Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
Changed incomplete Webserver project over to using the uIP timer library.
2010-01-15 02:42:54 +00:00
f0d6d4ef13
Started Webserver RNDIS host project.
2010-01-12 07:29:43 +00:00
efb6c35778
Update Doxygen configuration files to the latest Doxygen version.
2010-01-06 13:37:29 +00:00
d97db1120b
Added support to the MIDI Class drivers for packed data, where multiple MIDI events are packed into a single USB packet. Added new MIDI Class driver flush routines to override packing behaviour.
2010-01-05 13:52:34 +00:00
6122ba93cf
Fix MassStorageKeyboard demo USE_INTERNAL_SERIAL check being performed before the required library headers were included, causing a compilation error.
...
Added notes to the class driver functions indicating which functions require what Device/Host state machine states to function.
2010-01-04 13:34:02 +00:00
7f9f97c792
Update copyright year to 2010.
2009-12-30 23:49:19 +00:00
5e3572d7d1
Oops - remove accidentally committed .lst files from the TemperatureDataLogger project.
2009-12-30 13:38:05 +00:00
0ea819f781
Fix TemperatureDataLogger - sample tick timer wasn't being initialized in the correct CTC mode.
2009-12-30 13:35:24 +00:00
7beafc64e2
Oops - fix include directory for case-sensitive filesystems.
2009-12-30 09:02:44 +00:00
208edeee0f
Add new TemperatureDataLogger project, a simple USB Mass Storage class Temperature Data Logger using the onboard Dataflash and Temperature sensor.
2009-12-30 09:00:29 +00:00
f5951d1593
Reduced guard bit time in the AVRISP project PDI/TPI protocols to reduce the time needed to reverse the data communication direction.
2009-12-29 14:54:52 +00:00
b1dbd92c32
Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit. Fixed TPI interface lines not being changed correctly when in bit-banged TPI mode.
2009-12-29 14:43:03 +00:00
e1c1c25619
Change the AVRISP project's RESET LINE makefile tokens to AUX LINE, as it is not always used for target reset.
2009-12-29 05:18:16 +00:00
93fe420d89
Minor documentation updates.
2009-12-29 05:08:08 +00:00
4600fd0cb6
Fix TPI NVM Write handler -- AVRStudio sends out writes in page sized chunks, not byte sized chunks.
2009-12-28 07:50:20 +00:00
7c8f4a716f
Add first draft of the TPI NVM commands for reading, writing and erasing a target. Needs testing when physical access to a part is available.
2009-12-28 07:17:21 +00:00
3222f21b84
Add dummy undocumented TPI XPROG parameters to the AVRISP project so that TPI programming mode can be entered.
2009-12-28 02:58:23 +00:00
d4ca7fb44c
Fix MIT license language to make its intent clearer.
2009-12-28 00:34:20 +00:00
d15cbdd490
Fix mistakes in the XPROGTarget.c/.h files for TPI mode software USART clock rate and PDI mode XPLAIN board autoconfiguration.
2009-12-27 14:17:01 +00:00
8301dc553e
Fix references to the renamed AVRISP-MKII project folder.
2009-12-27 12:35:31 +00:00
8ecdc2b144
Rename AVRISP project folder to AVRISP-MKII.
2009-12-27 12:28:29 +00:00
022035839e
Remove missed timer 0 init code in the ISP protocol handler in the AVRISP project. Switch the XPROG protocol target communications handler over to using Timer 1 COMA/COMB ISRs for the two physical layers, rather than COMA/ICR1. Speed up bit-banged USART mode slightly.
2009-12-27 07:14:57 +00:00
8cd7e118e9
Fixed ISP mode in the AVRISP programmer project.
2009-12-26 05:20:10 +00:00
d1608d4af3
Added const where possible to the source functions in the Projects directory.
...
Added command timeout to the AVRISP project so that incorrectly connected targets no longer freeze the device.
Removed string descriptors from the TeensyHID bootloader to reduce its size.
2009-12-26 04:13:55 +00:00
35dac470f2
Complete TPI protocol code to enter and exit TPI programming mode for the ATTINY 6-pin devices.
2009-12-24 03:02:26 +00:00
65fcebf478
Complete combining of PDI and TPI target communication code files, stub out TINY NVM controller functions.
2009-12-24 02:52:10 +00:00
cfdab42dcf
Rename PDITarget.c/.h to XPROGTarget.c/.h so that both PDI and TPI programming can be included in the one set of files.
2009-12-24 02:29:01 +00:00
18b0d408a9
Remove serial driver use from the AVRISP project now that it is no longer needed.
2009-12-24 02:27:21 +00:00
9decc2bc59
Combine PDIProtocol and TPIProtocol into a single XPROGProtocol set of files.
2009-12-24 02:14:04 +00:00
05fcf7e2a7
Rename PDIProtocol.c/.h to XPROGProtocol.c/.h as it will now handle both TPI and PDI programming.
2009-12-24 01:59:36 +00:00
ce044844ea
Combine AVRISP project TPI and PDI lib directories - these protocols use the same underlying XPROG wrapper for the host-to-programmer command wrapping.
2009-12-24 01:55:53 +00:00
26bc1f3cfd
Correct include paths and makefile for the AVRISP project now that the protocol handlers are in seperate directories.
2009-12-23 14:52:52 +00:00
31d7194252
Make seperate ISP, PDI and TPI folders in the AVRISP project Lib subdirectory to hold each protocol's files.
2009-12-23 14:45:47 +00:00
69802635ed
Lower timeout periods in the AVRISP project. Increment firmware minor revision number in the AVRISP project so that it remains comatible with the latest AVRStudio without an upgrade warning.
2009-12-23 14:42:50 +00:00
bd5e8f07b7
Stub out more of the TPI programming protocol routines in the AVRISP project.
2009-12-23 13:28:44 +00:00
be71f934a4
Seperate out XMEGA and TINY NVM routines into seperate files.
2009-12-23 13:07:51 +00:00
cda88cf97c
Start of implementation of the low level TPI programming protocol in the AVRISP project.
2009-12-23 12:54:15 +00:00
c99f6657a6
Correct TeensyHID bootloader descriptors to use the correct revision code for the ATMEGA32U4 based Teensy revision.
2009-12-21 07:42:43 +00:00
37c9ba7fa9
Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott).
2009-12-20 22:33:48 +00:00
b408a5fe62
Add const qualifier to the parameters of Projects' functions where possible.
2009-12-20 06:23:24 +00:00
e73f05b8b2
Added CPU Usage monitor host app to the LEDNotifier project.
2009-12-20 05:40:17 +00:00
901e26edd8
Add LEDNotifier project to the Projects folder build list. Add new LEDMixer C# host application for the LEDNotifier project.
2009-12-18 05:34:11 +00:00
12abb59b19
Fix up references in the LEDNotifier project to the old HotmailNotifier name.
2009-12-18 05:30:55 +00:00
47384e3c50
Rename HotmailNotifier project files to LEDNotifier.
2009-12-18 05:25:51 +00:00
3b3ea167f0
Renamed HotmailNotifier project to LEDNotifier.
2009-12-18 05:22:57 +00:00
3d6508c9b9
Enhance the HotmailNotifier project so that the LEDs' individual brightness can be controlled individually via software PWM.
2009-12-18 04:40:15 +00:00
c3758ac5ef
Un-inline the SendAddress function in NVMTarget.c/.h of the AVRISP project.
...
Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.
2009-12-17 10:02:19 +00:00
021b1b567e
More speed and quality improvements to the software USART in the AVRISP project.
2009-12-16 09:13:42 +00:00
f0b4d79629
Slightly speed up software USART in the AVRISP project - faster parity computation, ensure received data is byte aligned when receive is complete by throwing away the start bit during reception.
2009-12-16 08:03:04 +00:00
461607020c
Use default NVM base address in the AVRISP programmer project in case the host programmer software doesn't set it correctly.
2009-12-16 03:17:18 +00:00
4f74075fad
Speed up bit-banged USART code in the AVRISP project.
...
Fix project text files to refer to "project" instead of "demo".
2009-12-15 11:12:38 +00:00
2f6c096050
Complete initial working revision of PDI programming in the AVRISP project (XMEGAs can now be programmed by the firmware).
2009-12-15 10:06:49 +00:00
79efd8c79e
Fix a bug in the Still Image Host Class driver where the returned block status code was being truncated.
...
Add programming support to the AVRISP project's PDI programming mode; paged memory writes are not currently functional.
2009-12-15 05:17:52 +00:00
8ea051de63
Add Lock/Fuse byte programming support to the AVRISP PDI programming protocol code.
2009-12-15 00:58:22 +00:00
a7880ac1cd
Fix error in AVRISP programmer when repeatedly using PDI mode via the hardware USART due to the SendByte routine not clearing the Transmit Complete USART flag.
2009-12-15 00:14:17 +00:00
bb38793312
Add Doxygen documentation to the completed portions of the PDI programming protocol in the AVRISP project.
2009-12-14 07:06:30 +00:00
f3e4fbe512
Use the PDI REPEAT instruction in the PDI programmer code to reduce protocol overhead and greatly improve transfer throughput. Switch bit-bang USART in the AVRISP project to Timer 1, so that Timer 0 can be used for hardware timeouts while waiting for the NVM bus or controller to become ready.
2009-12-14 06:01:56 +00:00
48e50b6b57
Added memory erase handling to the PDI protocol in the AVRISP project.
2009-12-14 05:15:42 +00:00
8a55d80e7e
Fix NVM commands so that memory reads and CRC generations now work correctly using unoptimized PDI commands.
2009-12-14 04:39:16 +00:00
1fa27139f5
Split out NVM access code in the AVRISP project into a seperate NVMTarget.c source file and header. Make NVM register accesses use the NVM base address as set by the host, rather than using the fixed value from the XMEGA datasheet.
2009-12-14 02:59:34 +00:00
3705330dd3
Use -pedantic compile time option to find and correct several minor code errors.
2009-12-13 14:09:25 +00:00
307ba254d5
The AVRISP project can now enter PDI mode under both bit-bang and hardware USART connection modes, tested against the XPLAIN board hardware. Still need to complete higher level NVM access code so that the device's memories can be read and written.
2009-12-13 12:50:47 +00:00
33a46b243a
PDI NVM enable is fast enough that bare polling is enough without a fixed delay in between each attempt. Make sure the USART transmitter is enabled explicitly when the USART is configured, so that repeated attempts to re-enter PDI mode don't fail due to TXEN not being set.
2009-12-11 04:56:52 +00:00
66201a05e9
Fix PDI code - must send NVM enable key least significant byte first, need to make sure Tx and Rx is switched correctly including disabling the output on the Tx line when receiving.
2009-12-11 04:04:34 +00:00
7e5966c1a8
Fix AVRISP PDI protocol - make sure inverted masks have the appropriate parenthesis around them, make sure the BREAK command for the hardware USART has 12 clock cycles exactly. Poll NVM Enable bit in the target's STATUS PDI register with a timeout, as it is not set immediately.
2009-12-11 00:19:25 +00:00
42cfd15793
Change over AVRISP project to have both hardware USART and software USART modes for the PDI protocol, when enabled. Fix up PDI initialisation routines.
2009-12-11 00:03:10 +00:00
7aecda6fda
Fix PDITarget_ReceiveByte() not discarding the start bit properly, and reading in the bits inverted and in the wrong order.
2009-12-10 00:54:08 +00:00
1e3513ed70
Add even parity bit to the software USART framing in the AVRISP project's PDI programming code.
2009-12-09 12:31:55 +00:00
9c8ed168e5
Fix inverted bit-banged USART logic in the AVRISP project for PDI programming. Add a delay to the clock toggling in the AVRISP project to ensure that the programming speed does not exceed 10MHz under any conditions to satisfy the limits in the datasheet for all target voltages. Fix incorrect pin being used as the DATA in in PDI programming mode.
2009-12-09 12:01:01 +00:00
7ace314cc1
Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.
...
Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.
Minor code cleanups (remove redundant comments, fix spacing, etc.).
2009-12-09 00:50:55 +00:00
2281750b5f
Make sure that USB_STREAM_TIMEOUT_MS is set in the MassStorageHost ClassDriver demo, so that slow devices don't time out the data pipe. Increase pipe timeout in both MassStorageHost demos to 5 seconds to account for the really slow devices.
...
Fix TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting the AVR.
2009-12-08 07:43:33 +00:00
2919aeeaab
Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items.
...
Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype.
Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values.
2009-12-04 01:06:26 +00:00
f338ddcb87
Make sure the protocol handler files are included in the Doxygen documentation of the AVRISP project.
2009-12-03 09:19:09 +00:00
258a6a0177
Fix the tokens which enable and disable the different programming protocols in the AVRISP project.
2009-12-03 09:12:36 +00:00
f1baf12fae
Auto-configure AVRISP programmer configuration when built for the XPLAIN board to match the XPLAIN hardware connections.
2009-12-03 08:35:32 +00:00
a5adbae652
Document the PDI programming routines implemented so far in the AVRISP project. Add ability to selectively disable ISP programming support in addition to the existing ability to disable PDI programming support.
2009-12-03 07:42:56 +00:00
f69f03cb0d
Started implementing the low level PDI protocol in the AVRISP project, for XMEGA device programming.
2009-12-03 00:53:45 +00:00
f92b56191d
Add new more reliable software UART for the XPLAINBridge project by David Prentice and Peter Danneger.
2009-12-02 14:19:06 +00:00
fec31947a6
Removed John Steggall's software UART code from the XPLAIN Bridge project due to reliability issues.
2009-12-02 14:03:57 +00:00
1f8dfd0205
Add support for unwrapping of the XMEGA PDI programming protocol to the AVRISP Programmer project.
2009-12-02 13:42:08 +00:00
5930f47bf4
Rename V2ProtocolTarget files to ISPTarget in the AVRISP Programmer Clone project.
2009-12-02 12:04:37 +00:00
1ed6925b5b
Factor out all the ISP related code into a seperate ISPProtocol set of files in the AVRISP Clone programmer project, to clearly seperate out the programming protocols when PDI programming is implemented.
2009-12-02 12:02:01 +00:00
1645c3d243
Rename the V2Protocol command handlers in the AVRISP project in preperation of XMEGA PDI programming support.
2009-12-02 11:37:39 +00:00
1b2cd16976
Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device.
2009-11-30 02:20:26 +00:00
e5057fec8e
Enable pullup on the PD5 pin of the AVR in the XPLAINBridge project - this is connected to the XMEGA's /RESET line, need to enable pullup to prevent spurrious resets.
2009-11-26 13:59:11 +00:00
f37d21bbe9
Updated John Steggall's software USART in the XPLAINBridge project.
2009-11-26 01:17:29 +00:00
a04131cf04
Fix more Doxygen errors from missing parameter documentation.
2009-11-25 04:13:14 +00:00
50f4a3b625
Fix build and Doxygen errors.
2009-11-25 03:56:51 +00:00
8c6c27d88b
Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.
2009-11-25 03:26:57 +00:00
c05c7c7df4
Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).
2009-11-25 00:36:18 +00:00
d3f11eb528
Make the StandaloneProgrammer project seamlessly read out drive contents from either an attached FAT formatted drive when in host mode, or the onboard FAT formatted dataflash when in device mode.
2009-11-24 14:10:28 +00:00
702bec892d
Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions.
2009-11-23 13:35:52 +00:00
8b009bc113
Added new ReportType parameter to the HID Device Class driver CALLBACK_HID_Device_CreateHIDReport() callback to indicate the report type to generate.
2009-11-23 13:22:33 +00:00
aaa0bed556
The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.
...
The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).
The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.
The USB_MODE_HOST token is now defined even when host mode is not available.
Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.
2009-11-23 12:40:14 +00:00
86db035b1e
Add activity LED updates to the AVRISP project.
2009-11-23 05:28:08 +00:00
7ef58eef7a
Fixed LowLevel Keyboard demo not saving the issued report only after it has been written to the endpoint.
...
Added support for multiple keyboard keycodes in a single report to the LowLevel and ClassDriver Keyboard demos.
2009-11-20 04:39:41 +00:00
9b20114555
Make RNDISHost demo validate the set Packet Filter to ensure that it is being sent correctly.
...
Add new (incomplete) StandaloneProgrammer project, using the ELM Petite FAT library to read files stored on the board's dataflash by the host.
2009-11-17 10:32:17 +00:00
e625fd6df3
Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().
2009-11-13 10:07:25 +00:00
d6edfe35c8
Spell check all source code variables, comments and strings.
2009-11-09 13:15:28 +00:00
c647c27639
Minor changes to the AVRISP project for code clarity.
2009-11-09 12:22:33 +00:00
4dde844e9f
Remove dependancies from the LowLevel demos to the ClassDriver demos, since the use of ClassDriver headers now outputs an error when NO_STREAM_CALLBACKS is used.
2009-11-08 21:56:18 +00:00
34dc7f241f
Make Low Level host demos use void pointers for the configuration descriptor, to prevent warnings when passed to the altered configuration descriptor parsing routines.
...
Added preprocessor checks to give a human readable error when the class drivers are used when the incompatible NO_STREAM_CALLBACKS compile time option is used.
2009-11-07 07:23:03 +00:00
f29fc1abc4
Add double banking property to LUFA powered projects in the Projects directory. Add guards to macro parameters to ensure that formulas passed as parameters don't mess up the internal macro structure.
2009-11-06 14:32:01 +00:00
9ea891ea20
Use clearer buffer names in the USBtoSerial project to prevent confusion.
2009-10-26 11:27:13 +00:00
de70f0f1cf
Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.
2009-10-18 05:35:48 +00:00
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
2009-10-16 08:04:51 +00:00
dc68de15b6
Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.
...
Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
2009-10-12 05:59:55 +00:00
664a292181
Application documentation/comment cleanup.
2009-10-08 07:18:28 +00:00
3ecc462954
Added pinouts to the AVRISP project for a standard ISP 6 Pin header to make construction of a standard ISP programmer easier.
2009-10-01 09:41:13 +00:00
409c49f057
Doxygen fixes to \param directives to give data direction in all projects. Make HID item filtering routines clearer in the HID WithParser demos.
2009-09-24 02:05:33 +00:00
4530a546a1
Fix broken MagStripe demo due to the HID Class driver changes.
2009-09-21 06:46:39 +00:00
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
2009-09-09 13:17:04 +00:00
6f993a2f75
Add link to third-party signed version of the official FLIP DFU driver for 64-bit Windows OSes to the DFU bootloader readme file.
...
Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.
2009-09-07 10:50:58 +00:00
7882da1ed8
Remove information about 64 bit Windows OS signing requirements for the CDC based demos -- apparently the native CDC driver can be installed without first disabling the OS's driver signing requirements.
2009-09-07 08:11:17 +00:00
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
2009-09-06 05:58:40 +00:00
f6700c0ea5
Added 64 bit OS driver installation instructions to the readme for all CDC based projects.
2009-09-06 04:22:46 +00:00
064e6a2f32
Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.
...
CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).
The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
2009-09-06 04:15:35 +00:00
113df4878b
Fix up MissileLauncher demo's ConfigurationDescriptor.c so that it uses the new USB_GetDeviceConfigDescriptor() function parameters.
2009-09-01 13:57:47 +00:00
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
2009-08-30 06:52:03 +00:00
244c86429b
Move ADC VTARGET sampling to a new V2Params_UpdateParamValues() in the AVRISP project so that there is a central place where all non-PC set target values can be updated easily.
2009-08-30 03:51:44 +00:00
4bb236e9a0
Increase AVRISP command timeout to 240ms up from 150ms to prevent some ISP commands from timing out too early.
...
Add check to the PROGRAM FLASH ISP and PROGRAM EEPROM ISP handler to return an explicit error when the host attempts to write more data than the device is able to buffer.
2009-08-28 08:24:50 +00:00
489515fbbf
Make WaitWhileBusy function in the AVRISP project more explicit about how it sends and receives the busy check command.
...
Reduce size of PROGRAM FLASH ISP or PROGRAM EEPROM ISP buffer to 256 bytes to prevent blowing the stack on the smallest USB AVR models.
2009-08-27 23:07:53 +00:00
922e60192d
Condensed SCSI command functions in the LowLevel Mass Storage Host demo, to save on FLASH space.
...
Fixed issue in AVRISP project where the target RESET line was being toggled before it was tristated, causing problems synchronising to some targets (thanks to Mike Alex).
2009-08-27 13:12:44 +00:00
f7cde02b80
Added extra note about missing OUT endpoint configuration to the HID Device mode Class driver.
...
Added pinout information to the AVRISP project.
2009-08-27 07:10:00 +00:00
f547eb3608
Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size.
...
Fixed Programmer's Notepad project file to reflect new location of AVRISP project.
2009-08-25 14:30:42 +00:00
17d06b8494
Add VTARGET level detection to the AVRISP project on supported AVR models.
2009-08-25 14:02:47 +00:00
244bba2097
Make AVRISP project build again - fix incorrect preprocessor directive in V2Protocol.c, fix makefile LUFA_PATH.
2009-08-25 13:26:34 +00:00
cfe054474f
Partial Commit: Remove now empty Projects\Incomplete directory and add the new AVRISP project to the Projects directory makefile.
2009-08-25 13:24:21 +00:00
271be037b7
Partial Commit: Move AVRISP project out of the Projects\Incomplete directory.
2009-08-25 13:21:19 +00:00
8aee4cb2f2
Add function documentation to the AVRISP project.
2009-08-25 13:15:30 +00:00
73801c73a1
Finished preliminary AVRISP project - all V2 protocol commands now work correctly for basic operations.
2009-08-25 11:24:45 +00:00
4742e95a3f
Fixed AVRISP V2 Protocol handler for the READ_FLASH_ISP and READ_EEPROM_ISP handler - can now correctly read back device data. Programming command handler is still broken, although first page is written correctly to FLASH in paged write mode.
2009-08-25 08:58:48 +00:00
6d1adf7339
Updated Benito project -- added hardware interrupt and software buffering for serial data reception to prevent missed characters, condensed pulse generation counters into a struct for clarity.
...
Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host.
Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.
2009-08-25 08:09:49 +00:00
f070902bdb
Fix endianness of LOAD_ADDRESS command data, add correct PROGRAM_FLASH_ISP/PROGRAM_EEPROM_ISP polling and endpoint bank clearing, add hardware delays/timeouts to the V2 Protocol handler in the AVRISP project.
2009-08-24 13:39:47 +00:00
8cb8f1cfdd
Switch to hardware delays and timeouts via a hardware timer in the V2 Protocol handler.
...
More additions to the PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP commands, although neither work correctly yet.
Added dummy RESET_PROTECTIONS handler to prevent the Atmel driver from crashing when the command returns an UNKNOWN_COMMAND error code.
2009-08-24 12:49:19 +00:00
92adb00f8e
Added PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP handler code to the V2 Protocol handler in the AVRISP project, programming complete checks not yet complete.
2009-08-24 11:04:05 +00:00
f9c0357b73
Fixed V2 Protocol READ_FLASH_ISP and READ_EEPROM_ISP handler code in the AVRISP project.
2009-08-24 10:08:02 +00:00
bff4dbe189
Fix to V2 Protocol for Fuse/Sig/Lock byte read -- off by one error on the array when writing back the response from the device.
...
FLASH/EEPROM reading and writing currently broken and unfinished, respectively.
2009-08-24 09:37:54 +00:00
dbb5f249bd
Added V2 protocol handlers for the READ and WRITE memory commands in the AVRISP project. Finished READ command handler, skeleton WRITE handler implemented.
2009-08-23 12:38:50 +00:00
7e74bd3ea2
Moved out target-related V2 protocol commands into a seperate file for the AVRISP project.
...
Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.
2009-08-23 10:17:13 +00:00
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
2009-08-23 08:37:11 +00:00
1e8df8951a
Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.
...
Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.
2009-08-23 04:01:49 +00:00
5acf23b254
Renamed Projects/Unfinished to Projects/Incomplete for consistancy.
2009-08-20 07:21:43 +00:00
2f95eea146
Add LOAD ADDRESS command parsing to the V2 Protocol hander in the AVRISP project.
...
Fix up references to functions in the Endpoint/Pipe documentation.
2009-08-20 07:16:55 +00:00
a9602f0250
Change spinloop in the AVRISP project Unknown V2 Protocol Command handler to use Endpoint_WaitUntilReady() instead to prevent infinite loops.
2009-08-19 13:19:01 +00:00
fa8beef82d
Moved out the handling of V2 Protocol parameters to a seperate set of files. Added parameter privellages, so that an error can be returned to the host when trying to perform a get/set value action on a parameter without the correct privellages.
2009-08-19 08:29:08 +00:00
32cc2b8d4d
Reorganise V2Protocol.c, add in function to assert or de-assert target RESET pin.
2009-08-19 07:08:27 +00:00
04354ffcad
Added handler for the V2 Protocol SPI_MULTI command to the AVRISP Programmer project.
...
Added documentation of the makefile CDEFS values to the MagStripe project.
2009-08-19 06:25:54 +00:00
083d3615d3
Corrections to the unfinished AVRISP Programmer project to allow AVRStudio to connect to it.
2009-08-19 05:40:05 +00:00
6d99486791
Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient.
...
Fix up Programmers Notepad Project file to show new Projects directory layout. Remove now moved AVRISP project from the Projects directory makefile.
2009-08-18 07:42:19 +00:00
0934f5c185
Move AVRISP Programmer project to a new Unfinished subdirectory of Project while it is under development.
2009-08-18 07:37:03 +00:00
bbcdaaa6dc
Enhancements to the AVRISP Programmer project to attempt to get AVRStudio to communicate with the device.
2009-08-18 07:22:51 +00:00
ecd82778cf
Added beginnings of a new AVRISP-MKII clone project.
...
Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.
Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
2009-08-17 12:38:24 +00:00
b71ff7c8cd
Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
2009-08-16 08:51:54 +00:00
25ddbb9e3b
Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.
2009-08-13 08:26:59 +00:00
99abd1a8b7
Added explicit attribute masks to the device mode demos' descriptors.
2009-08-13 08:14:16 +00:00
85c2716f2d
Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.
...
Fix incorrect event name in MassStorageHost.c.
2009-08-07 00:27:11 +00:00
3848482532
Add Benito board LED driver to the Benito Programmer project.
2009-08-05 13:17:06 +00:00
99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
2009-08-05 13:16:36 +00:00
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
2009-08-05 06:36:31 +00:00
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
2009-08-02 23:14:30 +00:00
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
2009-07-31 03:22:08 +00:00
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
2009-07-30 14:59:57 +00:00
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
2009-07-30 14:35:42 +00:00
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
2009-07-28 16:12:09 +00:00
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
2009-07-28 13:53:52 +00:00
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
2009-07-28 10:46:20 +00:00
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
2009-07-27 23:19:17 +00:00
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
2009-07-24 01:44:01 +00:00
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
2009-07-24 01:26:36 +00:00
2a0c28e6e4
Minor updates to the Benito programmer - remove redundant PORT register manipulations.
2009-07-23 14:11:20 +00:00
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
2009-07-23 11:01:32 +00:00
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
2009-07-23 10:39:10 +00:00
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
2009-07-21 13:31:21 +00:00
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
2009-07-20 14:07:02 +00:00
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
2009-07-19 07:30:37 +00:00
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
2009-07-16 15:00:10 +00:00
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
2009-07-16 08:15:27 +00:00
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
2009-07-13 06:44:14 +00:00
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
2009-07-13 05:34:43 +00:00
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
2009-07-11 15:05:56 +00:00
b462f2d457
Minor correction to MagStripe demo to fix build problems.
2009-06-29 11:11:51 +00:00
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
2009-06-28 13:39:08 +00:00
3cbdcd3686
Reduce struct name pollution - group typedef struct names by class driver name where appropriate.
2009-06-26 11:43:56 +00:00
a3a04aa671
Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.
2009-06-23 08:03:09 +00:00
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
2009-06-19 05:08:04 +00:00
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
2009-06-19 04:34:35 +00:00
dfa547164a
Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.
2009-06-19 03:37:47 +00:00
8bc3a91c1f
Fix broken MagStripe project.
2009-06-18 10:55:04 +00:00
d475ea4394
Oops - restore deleted MissileLauncher project, fix all spelling errors for "missile". TODO: Learn how to actually spell.
2009-06-18 10:49:19 +00:00
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
2009-06-18 10:31:55 +00:00
2b21a1552d
Remove hardcoded DOT path from all Doxygen config files.
...
Better documentation for the MissleLauncher project - add credit to PyLauncher project.
2009-06-16 13:50:02 +00:00
f33b282009
Add MissleLauncher project to the /Projects/ makefile. Add missing MissleLauncher Doxygen.conf file.
2009-06-16 07:25:47 +00:00
dcf303762a
Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors.
...
Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
2009-06-16 07:17:22 +00:00
39d07c3da0
Added USB Missle Launcher project, submitted by Dave Fletcher.
2009-06-16 05:53:27 +00:00
c75f8bf223
More Doxygen fixes - ensure no undocumented function parameters.
2009-06-15 08:36:12 +00:00
afe6ae1402
Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.
...
Split out common defines/types from class drivers into a seperate common class driver directory.
Make central USB Class driver dispatch headers, used for both device and host modes.
2009-06-14 15:55:13 +00:00
dd2cc7eda7
Remove outdated AVRStudio project files from demos, projects, bootloaders. Fix makefiles of ClassDriver device demos.
2009-06-05 07:30:23 +00:00
3d1baa6f95
Added multiple Report ID support to the HID class driver. Removed OUT endpoint support from HID driver (all OUT reports are now processed through control requests) as a seperate endpoint had issues with determining the exact output report length.
2009-06-05 02:23:31 +00:00
a67bd74e3e
Minor documentation page updates.
...
Redocumented all device demos, now that they have changed over to the new USB class drivers.
Added C linkage to class drivers for C++ support.
Added prefixes to most of the class driver constants to prevent name clashes.
2009-06-04 02:55:30 +00:00
7c5444b89a
Removed new Start of Frame event from the library; performance suffered far too much and it was only useful in one of the standard classes (HID). Altered HID demos to use the previous method of tracking millisecond periods via a hardware timer rather than the SOF events.
...
Fixed MIDI class driver blocking on unread events to the host.
2009-06-02 10:54:32 +00:00
d1e5266036
Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.
...
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
2009-06-01 11:03:39 +00:00
b7ef7f49c9
Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure.
2009-05-22 06:17:57 +00:00
d0806c817c
Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs.
2009-05-22 05:23:00 +00:00
2ee9fc7077
Rewritten event system to remove all macros, to make user code clearer.
...
Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
2009-05-18 10:05:21 +00:00
72c2922e38
Removed DESCRIPTOR_ADDRESS() macro as it was largely supurflous and only served to obfuscate code.
2009-05-17 07:44:00 +00:00
1f83abe6f4
Renamed the the TotalHIDReports element of the HID descriptor structure in the HID class demos to TotalReportDescriptors, to be more accurate of the element's function (thanks to Brian Dickman).
2009-05-07 22:33:36 +00:00
253deb996f
Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given wLength value when reading in the device descriptor.
...
Further documentation improvements - removed file view from the main library documentation, replaced file references in the documentation with group references.
2009-05-04 12:55:00 +00:00
a504a3a010
Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless STATIC_ENDPOINT_CONFIGURATION compile time token.
2009-04-24 07:28:51 +00:00
6865a7bc09
Applied STATIC_ENDPOINT_CONFIGURATION and FIXED_CONTROL_SIZE tokens to all Device mode demos to reduce binary size.
2009-04-22 13:30:03 +00:00
d860e9e842
USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode rather than having the library pass only partially read header data to the application.
...
The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure.
The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent.
2009-04-22 13:03:11 +00:00
e5e7eaee7a
Removed specialized Endpoint_ClearControl* and Pipe_ClearControl* macros in favour of the standard Endpoint_Clear* and Pipe_Clear* macros (Atmel have confirmed no effect from setting FIFOCON on control endpoints).
2009-04-21 06:05:50 +00:00
37b2130fb2
Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander).
2009-04-20 11:21:36 +00:00
619b0b7b6b
Spell checked non-source documentation pages.
2009-04-19 14:29:57 +00:00
d38fa49cb6
More documentation changes for better module-level documentation rather than file-level documentation.
2009-04-17 05:04:21 +00:00
8f6b4ddf76
Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev).
...
Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).
Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.
Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.
Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).
Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.
Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.
Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.
2009-04-16 08:50:34 +00:00
6933f2e1a5
All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected.
2009-04-01 13:53:58 +00:00
d83d87e1b8
Fixed MagStripe keyboard interface polling interval, increased to 4ms from 2ms to maintain compatibility with Apple MacOS X. Fixed changelog comments on the size of the track buffers when compiling for the AT90USBXXX6/7.
2009-03-29 06:31:24 +00:00
350141e085
Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incomming data.
...
Altered Project and Bootloader makefiles so that the path to the LUFA library can be set in one place.
2009-03-23 05:43:49 +00:00
88051e78a2
Combined Mouse, MouseViaInt and MouseFullInt demos into a single unified demo.
...
Corrections to Keyboard demo.
Removed AVRISP_Programmer project due to code quality concerns.
2009-03-19 14:16:12 +00:00
a94b191164
Fixed broken Magstripe project and TeensyHID bootloader.
2009-03-17 05:27:51 +00:00
e611b250c1
Added extra output to makefiles to indicate the currently selected BOARD parameter.
2009-03-16 11:29:00 +00:00
3803976534
Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson).
2009-03-10 05:56:17 +00:00
4a09da2098
Removed SetSystemClockPrescaler() macro, the clock_prescale_set() avr-libc macro has been corrected in recent avr-libc versions
2009-03-09 12:28:50 +00:00
7e7124e40b
Updated makefiles to reflect new dfu-ee programming target invocations (supplied by Opendous, Inc.).
...
Renamed the ATTR_ALWAYSINLINE function attribute macro to ATTR_ALWAYS_INLINE to match the style of the other function attribute macro names.
Added ATTR_ALWAYS_INLINE attribute to several inlined library functions, to ensure they are inlined in all circumstances.
Cleanups to Endpoint.h and Pipe.h. Added better documentation for the endpoint and pipe interrupts.
2009-03-04 08:03:13 +00:00
99145a8d7c
Makefiles and library modified to add a new F_CLOCK constant to give the unprescaled master input clock frequency, so that the correct PLL mask can be determined even when the CPU (F_CPU) clock rate is prescaled outside the normal input range of the PLL.
...
Started to clean up the AVRISP Programmer project code, donated by Opendous Inc.
2009-02-26 05:48:47 +00:00
032a83e9e1
Moved all source to the trunk directory.
2009-02-23 07:08:24 +00:00
Dean Camera