5a4197a91e
Update library manual with the new XPLAINBridge project's dual mode bridge/programmer functionality.
2010-01-19 05:43:58 +00:00
2746154652
Added master mode hardware TWI driver.
...
Fixed a bug in the incomplete Webserver project, where the packet data was not being written to and read from the correct buffer address.
2010-01-19 00:25:26 +00:00
f9781ca6ff
Fix the Benito project not pulsing the target's /RESET line when DTR is de-asserted.
2010-01-17 05:32:41 +00:00
77dda302ac
Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
...
Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
Changed incomplete Webserver project over to using the uIP timer library.
2010-01-15 02:42:54 +00:00
f0d6d4ef13
Started Webserver RNDIS host project.
2010-01-12 07:29:43 +00:00
89e4d73289
Fixed incorrect interface values in the VirtualSerialMouse and KeyboardMouse demo class driver structures.
...
Added caveat information to the CDC device class driver.
2010-01-12 00:42:00 +00:00
a56d95e8c2
Fix XPLAIN Dataflash and LED drivers.
2010-01-07 12:38:32 +00:00
efb6c35778
Update Doxygen configuration files to the latest Doxygen version.
2010-01-06 13:37:29 +00:00
d97db1120b
Added support to the MIDI Class drivers for packed data, where multiple MIDI events are packed into a single USB packet. Added new MIDI Class driver flush routines to override packing behaviour.
2010-01-05 13:52:34 +00:00
60e9641222
Inline USB management functions in the Class drivers which are standardized but currently unused, to prevent them from using up unneccesary cycles and flash in the user application.
2010-01-05 04:50:18 +00:00
71e5bcee3d
Fixed blocking CDC streams not aborting when the host is disconnected.
2010-01-04 00:14:09 +00:00
58a39c6666
Clean up MassStorageKeyboard demo.
2010-01-03 03:48:40 +00:00
208edeee0f
Add new TemperatureDataLogger project, a simple USB Mass Storage class Temperature Data Logger using the onboard Dataflash and Temperature sensor.
2009-12-30 09:00:29 +00:00
b1dbd92c32
Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit. Fixed TPI interface lines not being changed correctly when in bit-banged TPI mode.
2009-12-29 14:43:03 +00:00
8301dc553e
Fix references to the renamed AVRISP-MKII project folder.
2009-12-27 12:35:31 +00:00
8cd7e118e9
Fixed ISP mode in the AVRISP programmer project.
2009-12-26 05:20:10 +00:00
d1608d4af3
Added const where possible to the source functions in the Projects directory.
...
Added command timeout to the AVRISP project so that incorrectly connected targets no longer freeze the device.
Removed string descriptors from the TeensyHID bootloader to reduce its size.
2009-12-26 04:13:55 +00:00
cda88cf97c
Start of implementation of the low level TPI programming protocol in the AVRISP project.
2009-12-23 12:54:15 +00:00
37c9ba7fa9
Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott).
2009-12-20 22:33:48 +00:00
8b75659563
Added new NO_DEVICE_SELF_POWER and NO_DEVICE_REMOTE_WAKEUP compile time options.
2009-12-20 13:00:49 +00:00
77cd3a42a7
Fixed TeensyHID bootloader not enumerating to the host correctly.
2009-12-20 12:09:22 +00:00
3b3ea167f0
Renamed HotmailNotifier project to LEDNotifier.
2009-12-18 05:22:57 +00:00
2cab8f0725
Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be used (thanks to Daniel Levy).
2009-12-18 00:32:21 +00:00
c3758ac5ef
Un-inline the SendAddress function in NVMTarget.c/.h of the AVRISP project.
...
Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.
2009-12-17 10:02:19 +00:00
108a22a66a
The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public.
2009-12-16 04:03:08 +00:00
461607020c
Use default NVM base address in the AVRISP programmer project in case the host programmer software doesn't set it correctly.
2009-12-16 03:17:18 +00:00
79efd8c79e
Fix a bug in the Still Image Host Class driver where the returned block status code was being truncated.
...
Add programming support to the AVRISP project's PDI programming mode; paged memory writes are not currently functional.
2009-12-15 05:17:52 +00:00
6648234157
Test with -Wextra, fix library warnings due to unused function parameters.
2009-12-13 14:43:34 +00:00
307ba254d5
The AVRISP project can now enter PDI mode under both bit-bang and hardware USART connection modes, tested against the XPLAIN board hardware. Still need to complete higher level NVM access code so that the device's memories can be read and written.
2009-12-13 12:50:47 +00:00
1e3513ed70
Add even parity bit to the software USART framing in the AVRISP project's PDI programming code.
2009-12-09 12:31:55 +00:00
9c8ed168e5
Fix inverted bit-banged USART logic in the AVRISP project for PDI programming. Add a delay to the clock toggling in the AVRISP project to ensure that the programming speed does not exceed 10MHz under any conditions to satisfy the limits in the datasheet for all target voltages. Fix incorrect pin being used as the DATA in in PDI programming mode.
2009-12-09 12:01:01 +00:00
7ace314cc1
Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.
...
Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.
Minor code cleanups (remove redundant comments, fix spacing, etc.).
2009-12-09 00:50:55 +00:00
2281750b5f
Make sure that USB_STREAM_TIMEOUT_MS is set in the MassStorageHost ClassDriver demo, so that slow devices don't time out the data pipe. Increase pipe timeout in both MassStorageHost demos to 5 seconds to account for the really slow devices.
...
Fix TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting the AVR.
2009-12-08 07:43:33 +00:00
c1fa230618
Add new USB_Host_GetDeviceStringDescriptor() convenience function.
2009-12-06 13:37:30 +00:00
c49bdcb7c9
Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a STALL to a GET MAX LUN request (thanks to Martin Luxen).
2009-12-04 09:08:48 +00:00
478d9dc04f
Added support for the Atmel EVK527 board hardware.
2009-12-04 06:02:28 +00:00
2919aeeaab
Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items.
...
Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype.
Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values.
2009-12-04 01:06:26 +00:00
258a6a0177
Fix the tokens which enable and disable the different programming protocols in the AVRISP project.
2009-12-03 09:12:36 +00:00
bae00a3d42
Added support for the Dataflash mounted on the XPLAIN board. Added new XPLAIN_REV1 board target for the first revision XPLAIN board, which used a different (smaller) Dataflash IC to later revisions.
2009-12-03 08:59:12 +00:00
a5adbae652
Document the PDI programming routines implemented so far in the AVRISP project. Add ability to selectively disable ISP programming support in addition to the existing ability to disable PDI programming support.
2009-12-03 07:42:56 +00:00
fec31947a6
Removed John Steggall's software UART code from the XPLAIN Bridge project due to reliability issues.
2009-12-02 14:03:57 +00:00
1b2cd16976
Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device.
2009-11-30 02:20:26 +00:00
b7f6a65c25
Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2.
...
Simplified the USB.h master include file's target validity checks.
2009-11-29 07:41:54 +00:00
2a28862dcc
Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero, which some devices use instead of Note Off messages (thanks to Robin Green).
2009-11-26 11:16:20 +00:00
5aa2b26261
Added new RNDIS Host class driver and the beginnings of a RNDISEthernetHost Class Driver demo.
...
Fixed all Class drivers to ensure they have appropriate guards on each function to ensure the device is enumerated before running, fixed error codes on all guards to return "DeviceDisconnected" where possble.
Renamed HOST_SENDCONTROL_DeviceDisconnect enum value to HOST_SENDCONTROL_DeviceDisconnected to be in line with the rest of the library enum error codes.
2009-11-26 04:46:31 +00:00
8c6c27d88b
Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.
2009-11-25 03:26:57 +00:00
c05c7c7df4
Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).
2009-11-25 00:36:18 +00:00
59ed10273c
Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero.
2009-11-24 08:54:41 +00:00
e4bf986bb3
Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount.
...
Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK.
2009-11-24 01:56:59 +00:00
702bec892d
Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions.
2009-11-23 13:35:52 +00:00
8b009bc113
Added new ReportType parameter to the HID Device Class driver CALLBACK_HID_Device_CreateHIDReport() callback to indicate the report type to generate.
2009-11-23 13:22:33 +00:00
c438d01f87
Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser.
2009-11-23 13:01:50 +00:00
aaa0bed556
The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.
...
The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).
The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.
The USB_MODE_HOST token is now defined even when host mode is not available.
Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.
2009-11-23 12:40:14 +00:00
6e867f7d9b
Removed code to zero reports between two keyboard reports with differing number of pressed keys, as this relied on non-standard OS behaviour.
2009-11-23 05:45:59 +00:00
86db035b1e
Add activity LED updates to the AVRISP project.
2009-11-23 05:28:08 +00:00
bcf07edeb2
Commit for the 091122 release.
2009-11-22 04:56:59 +00:00
6c38ca2890
Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when the given data length is zero.
2009-11-20 06:56:43 +00:00
7ef58eef7a
Fixed LowLevel Keyboard demo not saving the issued report only after it has been written to the endpoint.
...
Added support for multiple keyboard keycodes in a single report to the LowLevel and ClassDriver Keyboard demos.
2009-11-20 04:39:41 +00:00
79e54580ae
Fixed HOST_STATE_AS_GPIOR being ignored whilst in Host mode (thanks to David Lyons).
2009-11-16 05:45:05 +00:00
588886878e
Corrections, improvements and additions to the incomplete RNDISHost demo.
...
Change device demos which use the joystick to use the natural UP, DOWN, LEFT, RIGHT ordering in all demos when checking the joystick's position.
2009-11-13 13:24:04 +00:00
04774208b6
Minor code cleanups for clarity.
2009-11-11 09:09:39 +00:00
c1782ac024
Added new stream creation function to the CDC Class drivers, to easily make standard streams from CDC Class driver instances.
2009-11-10 06:22:03 +00:00
8bb007f80b
Fixed HID host Class driver report send/receive report broken when issued through the control pipe.
...
Make Mass Storage device Class driver accept resets at any time, rather than just after a command block has been processed.
Remove the HID device parser from the boot protocol Keyboard/Mouse demos.
2009-11-09 08:24:01 +00:00
f7ab433c67
Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.
2009-11-06 13:43:18 +00:00
8ba51f090f
Added new Printer Host mode Class driver.
...
Added new Printer Host mode ClassDriver demo.
Added table of supported classes and modes to the main USB Class Driver documentation.
2009-11-04 13:16:53 +00:00
4670b39070
Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop. Increased the default number of collection paths allowable by the parser.
2009-11-04 07:14:38 +00:00
87b2572ae5
Added new JoystickHostWithParser demos to the library.
...
Add some missing documentation to some of the library demos.
2009-11-04 04:55:10 +00:00
f93f732108
Update DevChapter9.c - use the Endpoint_ClearStatusStage() function where possible to reduce code size and (potentially) allow for centralized status stage timeouts.
...
Fix Joystick device demo HID descriptors - buttons should be placed outside the Pointer collection.
2009-11-04 04:17:11 +00:00
5832bab02f
Rename the AT90USBXXX67 internal driver directory to AVRU4U6U7.
2009-11-03 11:11:51 +00:00
cf610c5c91
Make HID device class driver reselect the correct endpoint after the user callbacks have fired.
2009-10-26 05:27:59 +00:00
de70f0f1cf
Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.
2009-10-18 05:35:48 +00:00
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
2009-10-16 08:04:51 +00:00
dc68de15b6
Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.
...
Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
2009-10-12 05:59:55 +00:00
be9d0a5aa9
Added stdio.h stream examples for the virtual CDC UART in the CDC host demos.
...
Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.
2009-10-11 06:14:08 +00:00
c7bc3ec391
Add new MIDI Host Class driver to the library, and new MIDIHost ClassDriver demo.
...
Make MouseHost and KeyboardHost ClassDriver demos use the HID Class driver's structures for the boot protocol Mouse/Keyboard report data, rather than rolling their own.
2009-10-08 08:46:27 +00:00
bdedbd558c
Add new MIDIHost LowLevel demo application.
...
Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.
2009-10-08 07:00:44 +00:00
433399b05d
Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer samples to and from the device (allowing more time for processing and output).
...
Fixed ClassDriver AudioOutput demo not selecting an audio output mode.
2009-10-03 07:59:32 +00:00
b7eead83aa
Cleanups to the Device mode Mass Storage demo applications' SCSI routines.
2009-10-02 07:40:24 +00:00
2f643f6143
Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when Report protocol is not needed.
2009-09-30 08:16:42 +00:00
baa1b22654
Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe) to send report to the attached device.
2009-09-30 07:58:17 +00:00
89c837ee34
Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.
...
MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.
Added beginnings of a MIDI class bootloader.
2009-09-30 04:40:36 +00:00
7977663f62
Add information on the new MouseHostDevice dual role demo to the library documentation. Add a 0x prefix to the LUFA_VERSION_INTEGER define to ensure that it is stored as BCD, and not an octal value.
2009-09-29 07:15:09 +00:00
e57e08c672
Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a device ID (thanks to Andrei Krainev).
2009-09-28 15:56:27 +00:00
242303c160
Add new attributes to the HID Report Parser and HID Host Mode Class driver to keep track of the largest report the device can send for buffer allocation purposes. Change MouseHostWithParser and KeyboardHostWithParser demos to only allocate the needed number of bytes.
2009-09-21 12:23:09 +00:00
f5c645296c
Added new MassStorageKeyboard Device Class Driver demo (thanks to Matthias Hullin).
2009-09-21 08:07:26 +00:00
51566d1a81
Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen.
...
Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID.
More additions to the unfinished HID Host Class Driver.
2009-09-20 12:01:25 +00:00
cd0adb7574
Added support for the officially recommended layout of the external peripherals connected to the BUMBLEB board.
...
Added flag to the HID Host Class driver to indicate the currently selected reporting protocol.
2009-09-17 23:34:16 +00:00
7c6b2019a3
Fix Mass Storage Host Class driver GetMaxLUN command - incorrect function return codes used in comparison to check for success.
...
Add HID Host Class driver functions to set the report protocol, add more class driver documentation.
2009-09-17 13:12:21 +00:00
eee712f769
Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker).
2009-09-14 05:57:17 +00:00
93b24a25df
Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael from DirectAid.ca).
2009-09-13 08:29:31 +00:00
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
2009-09-09 13:17:04 +00:00
524decdeb3
Change HID report parser so that it can calculate and record the sizes (IN, OUT and FEATURE) of each report within the device, by report ID. This will be required in host mode, so that the host can determine how many bytes of data must be read in for each report.
...
Add to MouseHostWithParser and KeyboardHostWithParser demos to print out the report sizes when a valid device is connected.
2009-09-09 08:34:24 +00:00
6f993a2f75
Add link to third-party signed version of the official FLIP DFU driver for 64-bit Windows OSes to the DFU bootloader readme file.
...
Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.
2009-09-07 10:50:58 +00:00
c8b72f955f
Corrected incorrect signature bytes for the AT90USB82 and added support for the ATMEGAXX2 variant AVRs to the DFU bootloader.
...
Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.
2009-09-07 07:57:00 +00:00
1190652c0b
Fixed DFU and CDC class bootloaders on the AT90USBXXX2 series USB AVRs.
2009-09-06 20:30:26 +00:00
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
2009-09-06 05:58:40 +00:00
064e6a2f32
Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.
...
CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).
The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
2009-09-06 04:15:35 +00:00
6783bc4594
Add StillImage Host Class Driver functions for opening and closing sessions. Ensure IsActive is set on the interface to allow device functions to run.
...
Fix spelling of "Received" in all source files where it is misspelt "Recieved".
2009-09-02 13:08:55 +00:00
205b35d131
Add user-filtering to the HID report parser, so that the user code can decide which items are to be stored into the HID_ReportInfo_t structure and which should be discarded to save on RAM usage.
2009-09-02 07:16:52 +00:00
ecf7c18cf2
Fixed error in PrinterHost preventing the full page data from being sent to the attached device.
2009-09-02 00:27:52 +00:00
Dean Camera